Manuel d’utilisation Delta 31-552

12 pages 0.39 mb
Télécharger

Aller à la page of 12

Summary
  • Delta 31-552 - page 1

    INSTRUCTION MANUAL 6" Abrasive Belt Finishing Machine (Model 31-552) P ART NO. 406-03-651-0017 (0110) Copyright © 2001 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582). 6" A ...

  • Delta 31-552 - page 2

    2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury . However , if normal safety precaut ...

  • Delta 31-552 - page 3

    ADDITIONAL SAFETY RULES FOR ABRASIVE BEL T FINISHING MACHINES 3 WARNING: F AILURE TO FOLLOW THESE RULES MA Y RESUL T IN SERIOUS PERSONAL INJUR Y SA VE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. 1. DO NOT OPERA TE THIS MACHINE UNTIL it is assembled and installed accor ding to the instructions. 2. OBT AIN ADVICE from you ...

  • Delta 31-552 - page 4

    4 POWER CONNECTIONS IMPORT ANT : Make sure the electrical characteristics ar e the same between the motor nameplate and the power source and make sur e the power cir cuit the machine will be used on is properly fused and that wir e size is corr ect. IN ALL CASES, MAKE SURE THE RECEPT ACLE IN QUESTION IS PROPERL Y GROUNDED. WARNING: DO NOT EXPOSE TH ...

  • Delta 31-552 - page 5

    5 Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and matching r eceptacle which will accept the machine’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the curr ent of the machine. An undersized cord will ca ...

  • Delta 31-552 - page 6

    6 ASSEMBL Y ST AND AND ELECTRICALS If you purchased your machine with the optional steel stand and electricals, the stand is shipped as shown in Fig. 2. The switch (A) Fig. 2 and motor (B) Fig. 3 are completely assembled to the stand and the necessary wiring from the motor to the switch has been completed. ASSEMBLING MACHINE TO ST AND Place the mac ...

  • Delta 31-552 - page 7

    7 ALIGNING PULLEYS, ASSEMBLING BEL T AND ADJUSTING BEL T TENSION DISCONNECT MACHINE FROM POWER SOURCE Using a straight edge (A) Fig. 6, make certain the motor pulley (B) is aligned with the arbor pulley . If necessary , the motor pulley (B) can be adjusted on the motor shaft by loosening set screw (C) and moving the motor pulley (B) in or out as ne ...

  • Delta 31-552 - page 8

    8 OPERA TING CONTROLS AND ADJUSTMENTS ST AR TING AND STOPPING THE ABRASIVE FINISHING MACHINE T o start the machine, push “ON” button (A) Fig. 10. T o stop the machine, push “OFF” button (B). Fig. 10 A B LOCKING SWITCH IN THE “OFF” POSITION IMPORT ANT : When the machine is not in use, the switch should be locked in the OFF position using ...

  • Delta 31-552 - page 9

    9 ADJUSTING T ABLE DISCONNECT MACHINE FROM POWER SOURCE. T o tilt the table, loosen the table tilting handle (A) Fig. 15, move the table to the desired angle, and tighten the table tilting handle. The table tilting handle can be reposition- ed by pulling out the handle and repositioning it on the hex nut located underneath the handle. Positive tabl ...

  • Delta 31-552 - page 10

    10 INST ALLING OR REMOVING ABRASIVE BEL T Y our machine uses a 6"x48" belt. T o install or remove the belt, proceed as follows: DISCONNECT MACHINE FROM POWER SOURCE. 1. Remove the idler drum guard (A) and side guar d (B) Fig. 20. 2. T ur n the belt tension handle counter clockwise to reduce belt tension to a minimum. NOTE: It may be neces ...

  • Delta 31-552 - page 11

    11 ABRASIVE BEL TS - THEIR SELECTION AND USE Delta supplies a wide range of belts for use on your Finishing Machine. These belts are r ecommended for a wide range of work on wood, metals, plastics and other materials. However , when a large amount of pr oduction work of one kind is to be done, it is best to call in a coated abrasive specialist for ...

  • Delta 31-552 - page 12

    The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): BAMMER ® , INNOV A TION THA T WORKS ® , JETSTREAM ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , POR T A-BAND ® , PORT A-PLANE ® , PORTER- CABLE ® , QUICKSAND ® , SANDTRAP ® , SA W BOSS ® , SPEED-BLOC ® , SPEEDMA TIC ...

Fabricant Delta Catégorie Sander

Les documents que nous recevons du fabricant de l'appareilDelta 31-552 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Delta
- manuels d’utilisations 31-552
- fiches produit Delta
- dépliants
- ou étiquettes-énergie Delta 31-552
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Delta 31-552.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Delta 31-552, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Delta 31-552. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Delta 31-552.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Delta 31-552, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Delta 31-552 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Delta 31-552.

Le manuel d’utilisation complet Delta, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Delta 31-552 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Delta 31-552, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lDelta 31-552 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Delta 31-552 - qui devraient nous aider dans les premières étapes lors de l'utilisation Delta 31-552
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Delta 31-552
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Delta 31-552 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Delta 31-552?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Delta 31-552, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Delta 31-552 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)