Français dropdown-ico

Manuel d’utilisation Siemens SIMATIC 505

53 pages 0.29 mb
Télécharger

Aller à la page of 53

Summary
  • Siemens SIMATIC 505 - page 1

    SIMA TIC 505 High Speed Counter and Encoder Module User Manual Order Number: PPX:505–81 13–2 Manual Assembly Number: 2586546–0019 Second Edition ...

  • Siemens SIMATIC 505 - page 2

    01/21/92 Copyright 1992 by Siemens Industrial Automation, Inc. All Rights Reserved — Printed in USA Reproduction, transmission or use of this document or contents is not permitted without express consent of Siemens Industrial Automation, Inc. All rights, including rights created by patent grant or registration of a utility model or design, are re ...

  • Siemens SIMATIC 505 - page 3

     Contents iii Contents Chapter 1 Overview 1.1 Features 1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Inputs 1–4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Outputs 1–5 . . . . . . . . . ...

  • Siemens SIMATIC 505 - page 4

    iv Contents Chapter 4 T roubleshooting 4.1 Checking the Operation of the Module 4-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 5 Applications 5.1 Sprayer Example 5-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.1 Description 5-2 . . . . . . . . . . . . . . . . . . . . ...

  • Siemens SIMATIC 505 - page 5

     Contents v List of Figur es 1-1 High Speed Counter Module 1-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Output 1-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 High Speed Counter LEDs 1-6 . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens SIMATIC 505 - page 6

    vi Contents List of T ables 1-1 Deter mining Count in Pulse Counter Mode 1-7 . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Environmental Specifications B-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Electrical Specifications B-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens SIMATIC 505 - page 7

     Overview 1-1 Series 505 High Speed Counter and Encoder Module User ’ s Manual Chapter 1 Overview 1.1 Features 1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Inputs 1-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens SIMATIC 505 - page 8

     1-2 Series 505 High Speed Counter and Encoder Module User ’ s Manual 1.1 Features The Series 505  High Speed Counter (HSC) module (PPX:505-7002) provides two independent high-speed counter channels. Each channel has the following features.  Four counter modes:  Pulse counter  Quadrature counter modes: 1X, 2X, ...

  • Siemens SIMATIC 505 - page 9

     Overview 1-3 Series 505 High Speed Counter and Encoder Module User ’ s Manual Base Plane Connector Printed Circuit Board Front Bezel Bezel Screw LEDs T erminal Block Bezel Screw Figure 1-1 High Speed Counter Module ...

  • Siemens SIMATIC 505 - page 10

     1-4 Series 505 High Speed Counter and Encoder Module User ’ s Manual 1.2 Inputs The HSC module has two independent channels. Each channel has four inputs.  Reset  Inhibit  T wo counter inputs Each input may be used as either sinking or sourcing (with external 5–24 VDC power supply). The input signals are connec ...

  • Siemens SIMATIC 505 - page 11

     Overview 1-5 Series 505 High Speed Counter and Encoder Module User ’ s Manual 1.3 Outputs Each channel has two open collector outputs capable of driving TTL level signals or sinking up to 0.4 Amps of current (at 40 _ C) from an external 24 VDC source and load. Y Output Output Return Output Circuit 0 P1 P2 65,535 Y1 Y2 Counter V alue Figure 1- ...

  • Siemens SIMATIC 505 - page 12

     1-6 Series 505 High Speed Counter and Encoder Module User ’ s Manual 1.4 LED Indicators Each channel contains four LED indicators which provide a visual indication of the channel’ s status as shown in Figure 1-3. Figure 1-3 High Speed Counter LEDs A T urns on when there is current flow through the A input. B T urns on w ...

  • Siemens SIMATIC 505 - page 13

     Overview 1-7 Series 505 High Speed Counter and Encoder Module User ’ s Manual 1.5 Counting Modes 1.5.1 Pulse Counter Each channel has two inputs, A and B. In the pulse counter mode, counting Mode occurs on the rising or falling edge of the incoming pulses. The relationship of the states of these two inputs determines the direction of the coun ...

  • Siemens SIMATIC 505 - page 14

    Overview 1-8 Series 505 High Speed Counter and Encoder Module User ’ s Manual Counting Modes (continued) 1.5.2 Quadrature Mode For quadrature mode, each channel counts according to rising and/or  falling edges. T ypical devices for quadrature inputs are optical encoders. Different quadrature modes are selected based on the ...

  • Siemens SIMATIC 505 - page 15

     Overview 1-9 Series 505 High Speed Counter and Encoder Module User ’ s Manual 1.5.4 2X Quadratur e If input A leads input B, the module counts up on both the rising and falling edges of input A. If input B leads input A, the module counts down on the rising and falling edges of input A. Figure 1-6 illustrates the relationship between inputs A ...

  • Siemens SIMATIC 505 - page 16

    Overview 1-10 Series 505 High Speed Counter and Encoder Module User ’ s Manual Counting Modes (continued) 1.5.5 4X Quadratur e If input A leads input B, the module counts up on rising and falling edges of both input A and input B. If input B leads input A, the module counts down on the rising and falling edges of input A and input B. Figure 1-7 s ...

  • Siemens SIMATIC 505 - page 17

     Installation 2-1 Series 505 High Speed Counter and Encoder Module User ’ s Manual Chapter 2 Installation 2.1 Before Installing the Module 2–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.1 Visual Inspection 2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.2 ...

  • Siemens SIMATIC 505 - page 18

    2-2 Installation Series 505 High Speed Counter and Encoder Module User ’ s Manual 2.1 Before Installing the Module 2.1.1 Visual Inspection If there is any visible damage to the module, contact your Siemens Industrial Automation, Inc. distributor for replacement. 2.1.2 Additional Refer to the manuals listed below for instructions on installing, Re ...

  • Siemens SIMATIC 505 - page 19

     Installation 2-3 Series 505 High Speed Counter and Encoder Module User ’ s Manual 2.1.4 General W iring The count, inhibit, and unfiltered reset inputs are high-speed inputs which Considerations may respond to noise present on the lines. T o avoid problems, follow these guidelines when installing the HSC module. D Use the shortest possible wi ...

  • Siemens SIMATIC 505 - page 20

    2-4 Installation Series 505 High Speed Counter and Encoder Module User ’ s Manual Before Installing the Module (continued) 2.1.5 Hierar chy of Figure 2-1 provides a simple flowchart of the installation process. Installation Insert the Module Connect W ires Set Jumper Configuration on Module Power Up Log into Controller Figure 2-1 Hierar chy of In ...

  • Siemens SIMATIC 505 - page 21

     Installation 2-5 Series 505 High Speed Counter and Encoder Module User ’ s Manual 2.2 Selecting Counter Operation 2.2.1 Selecting The HSC module has two channels. Y ou can configure each channel Counter Mode to operate in any of four counter modes. Prior to installing the module into the I/O backplane, configure the module by setting the jump ...

  • Siemens SIMATIC 505 - page 22

    2-6 Installation Series 505 High Speed Counter and Encoder Module User ’ s Manual Selecting Counter Operation (continued) 2.2.2 Selecting the Some applications require faster response on the reset input line than Reset Filter the standard 3.75-ms filter allows. For faster response, select the optional 0.95-ms filter . (The 0.9-ms filter is more s ...

  • Siemens SIMATIC 505 - page 23

    Installation 2-7 Series 505 High Speed Counter and Encoder Module User ’ s Manual 2.3 Inserting the Module in the I/O Base The HSC is a single-wide module. Insert it into any available slot on any Series 505 I/O base. Do not touch the printed circuit board while inserting the module. This could cause electrostatic damage to the components on the ...

  • Siemens SIMATIC 505 - page 24

    2-8 Installation Series 505 High Speed Counter and Encoder Module User ’ s Manual 2.4 Wiring the Module 2.4.1 Wiring the W iring the module consists of wiring the the input and output signals. Te r minal Block See Figure 2-4 and Figure 2-5 for general guidelines. All connections are made at the module terminal block. See Figure 2-5. Output return ...

  • Siemens SIMATIC 505 - page 25

     Installation 2-9 Series 505 High Speed Counter and Encoder Module User ’ s Manual Ch1 A+ Ch1 B+ Ch1 RST+ Ch1 INH+ 5–24 VDC Ch2 A+ Ch2 B+ Ch2 RST+ Ch2 INH+ 5–24 VDC Sourcing Driver Ch2 INH– Ch2 RST– Ch2 B– Ch2 A– Ch2 Y2 Ch2 Y1 + – Ch1 Y2 Ch1 Y1 + – Sinking 5–24 VDC Ch1 A– Ch1 B– Ch1 RST– Ch1 INH– Driver Encoder 5–24 ...

  • Siemens SIMATIC 505 - page 26

    2-10 Installation Series 505 High Speed Counter and Encoder Module User ’ s Manual 2.5 Logging the Module into the Controller 2.5.1 Updating the I/O After inserting the module into the base, update the I/O configuration Configuration in the controller . The module does not automatically onfigure itself. Definition A VPU or other programming devic ...

  • Siemens SIMATIC 505 - page 27

     Installation 2-11 Series 505 High Speed Counter and Encoder Module User ’ s Manual 2.5.3 Viewing the I/O Use SHOW to view the I/O Configuration Chart. If the HSC is Configuration installed in slot 1, for channel 1, base 00, the I/O chart will appear Chart as displayed in Figure 2-7. I/O CONFIGURA TION CHART FOR : CHANNEL 1, BASE 00 Slot 1 I/O ...

  • Siemens SIMATIC 505 - page 28

     Programming 3-1 Series 505 High Speed Counter and Encoder Module User ’ s Manual Chapter 3 Programming 3.1 Controller Input W ords 3-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.1 WX1 (Status W ord) 3-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens SIMATIC 505 - page 29

    Programming 3-2 Series 505 High Speed Counter and Encoder Module User ’ s Manual 3.1 Controller Input W ords The HSC module is configured as three word inputs (WX) and five word outputs (WY). It occupies eight words of the controller ’ s word image register . 3.1.1 WX1 (Status W ord) W ord 1 (WX) is the module’ s status word. Eight bits provi ...

  • Siemens SIMATIC 505 - page 30

     Programming 3-3 Series 505 High Speed Counter and Encoder Module User ’ s Manual Inhibit Status. Each channel has an Inhibit Status bit in the status word. If the channel’ s Inhibit field input is active or if its Inhibit Command bit is 1 (see Setup W ord, Section 3.1.3), this bit will be 1 and the counter will not count. Otherwise, this bi ...

  • Siemens SIMATIC 505 - page 31

    Programming 3-4 Series 505 High Speed Counter and Encoder Module User ’ s Manual Controller Input W ords (continued) Reset Command. Both channels have a Reset Command bit. A transition from 0 (off) to 1 (on) of the Reset Command acts as a one-shot (providing a momentary reset of the channel), setting the count to 0. Even though the bit remains 1, ...

  • Siemens SIMATIC 505 - page 32

     T roubleshooting 4-1 Series 505 High Speed Counter and Encoder Module User ’ s Manual Chapter 4 T roubleshooting Re-seat board Check jumper position and condition of jumper (metal insert intact) Symptom Probable Cause Corrective Action Input LED is not on and Output LED is not on Signal wire noise Module not configured in controller I/O confi ...

  • Siemens SIMATIC 505 - page 33

    4-2 T roubleshooting Series 505 High Speed Counter and Encoder Module User ’ s Manual 4.1 Checking the Operation of the Module To check the operation of the module, follow these steps.  Module outputs will turn on during this procedure. 1. Using a programming device, force all presets to 0. 2. Reset both counters through the reset ...

  • Siemens SIMATIC 505 - page 34

     Applications 5-1 Series 505 High Speed Counter and Encoder Module User ’ s Manual Chapter 5 Applications 5.1 Sprayer Example 5- 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.1 Description 5- 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens SIMATIC 505 - page 35

    Applications 5-2 Series 505 High Speed Counter and Encoder Module User ’ s Manual 5.1 Sprayer Example 5.1.1 Description A reversible DC motor drives a paint sprayer up and down a vertical assembly . A quadrature encoder on the drive shaft senses the direction and relative position of the sprayer . Channel 1 of the HSC will be used to enable the s ...

  • Siemens SIMATIC 505 - page 36

     Applications 5-3 Series 505 High Speed Counter and Encoder Module User ’ s Manual 5.1.2 Solution Connect encoder signals A and B to inputs A and B of the HSC. See Figure 5–2. Limit switch 1 (sprayer home) drives channel 1 Reset. Channel 1 outputs 1 and 2 are wire ORed and drive the sprayer enable. Select 1X Quadrature mode for channel 1, se ...

  • Siemens SIMATIC 505 - page 37

    Applications 5-4 Series 505 High Speed Counter and Encoder Module User ’ s Manual Sprayer Example (continued) LDC1 A: N= WY4 0 BITS1 A: N= WY4 4 BITS2 A: N= WY4 2 C12 C1 MOVW1 A: N= V200 2 BITC23 A: N= WY4 2 C15 C14 B: WY5 CLEAR CHANNEL 1 SETUP WORD SETUP CHANNEL 1 OUTPUT 2 T O GO LOW AT PRESET SELECT COUNT INHIBIT ON CHANNEL 1 INHIBIT CHANNEL 1 ...

  • Siemens SIMATIC 505 - page 38

     Applications 5-5 Series 505 High Speed Counter and Encoder Module User ’ s Manual 5.2 Flow Rate Example 5.2.1 Description A flow meter outputs 200 pulses per gallon. The program requires calculation of flow rate in gallons per minute (GPM). 5.2.2 Solution Configure the HSC as WX9–WX1 1, WY12–WY16. Attach channel 1 to the flow meter . The ...

  • Siemens SIMATIC 505 - page 39

    Applications 5-6 Series 505 High Speed Counter and Encoder Module User ’ s Manual 5.3 T ank Filling Example 5.3.1 Description The HSC module measures the volume of liquid and control the filling valve. (See Figure 5-6.) A flow meter , generating 200 pulses per gallon, is connected to the HSC channel 2, input A. Output 2 controls the filling valve ...

  • Siemens SIMATIC 505 - page 40

     Applications 5-7 Series 505 High Speed Counter and Encoder Module User ’ s Manual C141 BITC1 A: WY4 N = 5 C140 X128 C140 C140 C256 C140 IS USED T O INITIA TE/TERMINA TE FILLING C1 C140 C1 : RESET HSC, LOAD INIT AL PRESETS Y20 LDC4 A: WY4 N = 0 MOVW1 A: V200 N = 2 B: WY7 BITS1 A: WY4 N = 5 C141 : CLEAR RESET BIT C1 Y20 C1 Y20 Y20 C140 : ENABLE ...

  • Siemens SIMATIC 505 - page 41

    Applications 5-8 Series 505 High Speed Counter and Encoder Module User ’ s Manual T ank Filling Example (continued) C51 C8 C51 C8 : AFTER 90,000 PULSES, SUBTRACT THE OVERCOUNTS FROM 10,000 AND LOAD THE REMAINING COUNT INT O PRESET 2. CTR2 P = 9 MOVW2 A: V201 N = 1 B: WY7 SUB2 C51 C8 Y20 C61 SUB1 C61 C51 : ACCUMULA TE THE OVERCOUNTS A: WX3 B: V200 ...

  • Siemens SIMATIC 505 - page 42

     T erminal Block W orksheet A-1 Series 505 High Speed Counter and Encoder Module User ’ s Manual Appendix A T er minal Block W orksheet ...

  • Siemens SIMATIC 505 - page 43

     Specifications B-1 Series 505 High Speed Counter and Encoder Module User ’ s Manual Appendix B Specifications B.1 Environmental Specifications B-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B.2 Electrical Specifications B-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B ...

  • Siemens SIMATIC 505 - page 44

    Specifications B-2 Series 505 High Speed Counter and Encoder Module User ’ s Manual B.1 Environmental Specifications T able B-1 Environmental Specifications Operating T emperature 0 _ to 60 _ C (32 _ to 140 _ F) Storage T emperature –40 _ to 70 _ C (–40 _ to 158 _ F) Relative Humidity 5% to 95% noncondensing Pollution Degree 2, IEC 664, 664A ...

  • Siemens SIMATIC 505 - page 45

     Specifications B-3 Series 505 High Speed Counter and Encoder Module User ’ s Manual B.2 Electrical Specifications T able B-2 Electrical Specifications Count Inputs Frequency (maximum) Duty Count Mode Quadrature Mode Cycle Freq. Freq. (w/ 15  max. phase error) 10% 10 Khz 4 Khz 20% 25 Khz 8 Khz 25% 30 Khz 10 Khz 30% 35 Khz 12 Khz 40% 50 Khz ...

  • Siemens SIMATIC 505 - page 46

    Specifications B-4 Series 505 High Speed Counter and Encoder Module User ’ s Manual Electrical Specifications (continued)  Count inputs are constant current type inputs. Reset and Inhibit Inputs: On voltage: to 28 VDC, Class 2 supply Current on: 2 to 40 mA Of f voltage: –1.5 to 1.5 VDC Current of f: 0 to 0.75 mA Reset delay ti ...

  • Siemens SIMATIC 505 - page 47

     Specifications B-5 Series 505 High Speed Counter and Encoder Module User ’ s Manual Outputs User voltage: 28 VDC max. . . . . . . . . . . . . . . . . . . . . . . . . . V oltage drop: 1.8 VDC max. @ 400 mA . . . . . . . . . . . . . . . 1.0 VDC max. @ 25 mA Leakage current: 500  A max. . . . . . . . . . . . . . Peak current: 500 mA for 1 ms ...

  • Siemens SIMATIC 505 - page 48

    Specifications B-6 Series 505 High Speed Counter and Encoder Module User ’ s Manual B.3 Additional Compliances In addition, the system complies with applicable requirements of V erband Deutscher Elektrotechniker (VDE) 0160: Electrical Equipment Series 505 products have been developed with consideration of the draft standard for programmable contr ...

  • Siemens SIMATIC 505 - page 49

    Customer Registration We would like to know what you think about our user manuals so that we can serve you better . How would you rate the quality of our manuals? Excellent Good Fair Poor Accuracy Organization Clarity Completeness Overall design Size Index Would you be interested in giving us more detailed comments about our manuals? Y es! Please s ...

  • Siemens SIMATIC 505 - page 50

    BUSINESS REPL Y MAIL FIRST CLASS PERMIT NO.3 JOHNSON CITY , TN FOLD FOLD POST AGE WILL BE P AID BY ADDRESSEE NO POST AGE NECESSARY IF MAILED IN THE UNITED ST A TES SIEMENS INDUSTRIAL AUTOMA TION, INC. 3000 BILL GARLAND RD. P .O. BOX 1255 JOHNSON CITY TN 37605–1255 A TTN: T echnical Communications M/S 3519 ...

  • Siemens SIMATIC 505 - page 51

     Index-1 Index A Assistance, 2-2 C Configuration selecting, 2-10 updating, 2-10 Configuring jumpers, 2-5 User Options, 2-10 Count input, 1-4 Count rate, 1-2 Counter mode, 1-7 D Double-count quadrature, 1-9 E Electrical specifications, B-3 Environmental specifications, B-2 F Features, 1-2 H Handling the HSC, 2-2 I I/O address, 2-10 configuration ...

  • Siemens SIMATIC 505 - page 52

    Index-2 Q Quadrature Mode, quadruple count, 1-10 Quadrature mode double-count, 1-9 single-count, 1-8 Quadruple count, quadrature mode, 1-10 R References, 2-2 Reset, 1-2, 1-4 S Single-count quadrature, 1-8 Static electricity , 2-2 T T erminal block, 2-8 wiring diagram, 2-9 worksheet, 2-8 U Using status words, 3-2 W W iring, 2-3, 2-8 considerations, ...

  • Siemens SIMATIC 505 - page 53

    SIMA TIC is a registered trademark of Siemens AG. Series 505 and TISOFT are trademarks of Siemens Industrial Automation, Inc. T exas Instruments and TI are registered trademarks of T exas Instruments Incorporated. TI505, TI525, TI535, and TI545 are trademarks of T exas Instruments Incorporated. UL is a registered trademark of Underwriters Laborator ...

Fabricant Siemens Catégorie Pet Fence

Les documents que nous recevons du fabricant de l'appareilSiemens SIMATIC 505 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Siemens
- manuels d’utilisations SIMATIC 505
- fiches produit Siemens
- dépliants
- ou étiquettes-énergie Siemens SIMATIC 505
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Siemens SIMATIC 505.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Siemens SIMATIC 505, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Siemens SIMATIC 505. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Siemens SIMATIC 505.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Siemens SIMATIC 505, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Siemens SIMATIC 505 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Siemens SIMATIC 505.

Le manuel d’utilisation complet Siemens, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Siemens SIMATIC 505 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Siemens SIMATIC 505, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSiemens SIMATIC 505 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Siemens SIMATIC 505 - qui devraient nous aider dans les premières étapes lors de l'utilisation Siemens SIMATIC 505
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Siemens SIMATIC 505
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Siemens SIMATIC 505 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Siemens SIMATIC 505?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Siemens SIMATIC 505, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Siemens SIMATIC 505 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)