Manuel d’utilisation Hobart P660

12 pages 1 mb
Télécharger

Aller à la page of 12

Summary
  • Hobart P660 - page 1

    EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 FORM 23038 (12-95) P660 MIXER P660 MIXERS ML - 104605 ...

  • Hobart P660 - page 2

    – 2 – Installation, Operation, and Care of P660 MIXERS SA VE THESE INSTRUCTIONS GENERAL The P660 model mixer is a heavy duty 60 quart mixer which is designed primarily for preparing dough, batter, and pastry. It has a single speed transmission and features a 2 1 ⁄ 2 horsepower Hobart-built motor, a #12 attachment hub, and an electro-mechanica ...

  • Hobart P660 - page 3

    – 3 – INST ALLA TION UNPACKING Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery. Prior to installation, test the electrical service to assure that it agrees with the specifications on t ...

  • Hobart P660 - page 4

    – 4 – INSTALLATION CODES AND STANDARDS The installation of this appliance must be carried out by a licensed installer and in accordance with the applicable regulations, standards, codes of practice and related publications of the country of destination. ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE A ...

  • Hobart P660 - page 5

    – 5 – Fig. 2 ELECTRO-MECHANICAL TIMER CONTROLS The START button is used to start the mixer. The STOP button is used to stop the mixer. The TIMER is used in conjunction with the START button for timed mixing operations and will stop the mixer when a preset time has elapsed. Fig. 3 OPERA TION WARNING : MOVING BEATER IN BOWL, KEEP HANDS, CLOTHING, ...

  • Hobart P660 - page 6

    – 6 – BOWL LIFT The Handwheel is used to raise and lower the bowl on mixers with the standard bowl lift. Turn the Handwheel clockwise to raise the bowl or counterclockwise to lower it. MIXING This section explains operation of the mixer and how to install bowls and agitators. Bowl New mixer bowls and agitators (beaters, whips, and dough arms) s ...

  • Hobart P660 - page 7

    – 7 – Bowl Guard (Fig. 3) The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator. To rotate the Wire Cage Assembly to the rear . . . Push the Latch in to release the Centering Pin from the Centering Ramp. Note how the grooves on the nylon Retainers allow the Wire Cage to ride ar ...

  • Hobart P660 - page 8

    – 8 – Mixer Speed On P660 mixers equipped with single-speed gearing, all work is performed at that speed. Bowl Scraper Attachment The Mixer Bowl Scraper Attachment (when ordered) is provided with a separate instruction manual covering its installation, operation, use and care. CLEANING WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TA ...

  • Hobart P660 - page 9

    – 9 – Planetary Seal Occasionally, the planetary seal (Fig. 4) may become dry and begin to squeak. To correct this, work a little lubrication under the lip of the seal. Transmission The transmission oil should be even with the line on the Oil Level Gauge when the motor is NOT running. If the oil falls below this line, DISCONNECT ELECTRICAL POWE ...

  • Hobart P660 - page 10

    – 10 – ADJUSTMENTS Agitator Clearance The agitator clearance should be checked with each bowl change. The agitator must not touch the bowl and the maximum clearance between the bottom of the bowl and the E or ED Dough Arm is 8mm ( 5 ⁄ 16 "). Install a Bowl and Agitator. If the Bowl and Agitator come into contact before the Bowl Support r ...

  • Hobart P660 - page 11

    – 11 – TROUBLESHOOTING SYMPTOMS POSSIBLE CAUSES Mixer will not start. 1. Circuit protector in open position — check fuse or disconnect switch. 2. Mixer or attachment overloaded. 3. Bowl not all the way up. 4. Wire Cage Assembly is not in the front-center position. Agitator touches bowl. 1. Bowl clamp(s) not closed. 2. Improper agitator cleara ...

  • Hobart P660 - page 12

    – 12 – FORM 23038 (12-95) PRINTED IN U.S.A. ...

Fabricant Hobart Catégorie Mixer

Les documents que nous recevons du fabricant de l'appareilHobart P660 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Hobart
- manuels d’utilisations P660
- fiches produit Hobart
- dépliants
- ou étiquettes-énergie Hobart P660
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Hobart P660.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Hobart P660, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Hobart P660. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Hobart P660.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Hobart P660, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Hobart P660 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Hobart P660.

Le manuel d’utilisation complet Hobart, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Hobart P660 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Hobart P660, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHobart P660 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Hobart P660 - qui devraient nous aider dans les premières étapes lors de l'utilisation Hobart P660
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Hobart P660
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Hobart P660 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Hobart P660?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Hobart P660, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hobart P660 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)