English dropdown-ico

Manual Hobart P660

12 pages 1 mb
Download

Go to site of 12

Summary
  • Hobart P660 - page 1

    EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 FORM 23038 (12-95) P660 MIXER P660 MIXERS ML - 104605 ...

  • Hobart P660 - page 2

    – 2 – Installation, Operation, and Care of P660 MIXERS SA VE THESE INSTRUCTIONS GENERAL The P660 model mixer is a heavy duty 60 quart mixer which is designed primarily for preparing dough, batter, and pastry. It has a single speed transmission and features a 2 1 ⁄ 2 horsepower Hobart-built motor, a #12 attachment hub, and an electro-mechanica ...

  • Hobart P660 - page 3

    – 3 – INST ALLA TION UNPACKING Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery. Prior to installation, test the electrical service to assure that it agrees with the specifications on t ...

  • Hobart P660 - page 4

    – 4 – INSTALLATION CODES AND STANDARDS The installation of this appliance must be carried out by a licensed installer and in accordance with the applicable regulations, standards, codes of practice and related publications of the country of destination. ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE A ...

  • Hobart P660 - page 5

    – 5 – Fig. 2 ELECTRO-MECHANICAL TIMER CONTROLS The START button is used to start the mixer. The STOP button is used to stop the mixer. The TIMER is used in conjunction with the START button for timed mixing operations and will stop the mixer when a preset time has elapsed. Fig. 3 OPERA TION WARNING : MOVING BEATER IN BOWL, KEEP HANDS, CLOTHING, ...

  • Hobart P660 - page 6

    – 6 – BOWL LIFT The Handwheel is used to raise and lower the bowl on mixers with the standard bowl lift. Turn the Handwheel clockwise to raise the bowl or counterclockwise to lower it. MIXING This section explains operation of the mixer and how to install bowls and agitators. Bowl New mixer bowls and agitators (beaters, whips, and dough arms) s ...

  • Hobart P660 - page 7

    – 7 – Bowl Guard (Fig. 3) The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator. To rotate the Wire Cage Assembly to the rear . . . Push the Latch in to release the Centering Pin from the Centering Ramp. Note how the grooves on the nylon Retainers allow the Wire Cage to ride ar ...

  • Hobart P660 - page 8

    – 8 – Mixer Speed On P660 mixers equipped with single-speed gearing, all work is performed at that speed. Bowl Scraper Attachment The Mixer Bowl Scraper Attachment (when ordered) is provided with a separate instruction manual covering its installation, operation, use and care. CLEANING WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TA ...

  • Hobart P660 - page 9

    – 9 – Planetary Seal Occasionally, the planetary seal (Fig. 4) may become dry and begin to squeak. To correct this, work a little lubrication under the lip of the seal. Transmission The transmission oil should be even with the line on the Oil Level Gauge when the motor is NOT running. If the oil falls below this line, DISCONNECT ELECTRICAL POWE ...

  • Hobart P660 - page 10

    – 10 – ADJUSTMENTS Agitator Clearance The agitator clearance should be checked with each bowl change. The agitator must not touch the bowl and the maximum clearance between the bottom of the bowl and the E or ED Dough Arm is 8mm ( 5 ⁄ 16 "). Install a Bowl and Agitator. If the Bowl and Agitator come into contact before the Bowl Support r ...

  • Hobart P660 - page 11

    – 11 – TROUBLESHOOTING SYMPTOMS POSSIBLE CAUSES Mixer will not start. 1. Circuit protector in open position — check fuse or disconnect switch. 2. Mixer or attachment overloaded. 3. Bowl not all the way up. 4. Wire Cage Assembly is not in the front-center position. Agitator touches bowl. 1. Bowl clamp(s) not closed. 2. Improper agitator cleara ...

  • Hobart P660 - page 12

    – 12 – FORM 23038 (12-95) PRINTED IN U.S.A. ...

Manufacturer Hobart Category Mixer

Documents that we receive from a manufacturer of a Hobart P660 can be divided into several groups. They are, among others:
- Hobart technical drawings
- P660 manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart P660
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart P660.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart P660, service manual, brief instructions and user manuals Hobart P660. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart P660.

Similar manuals

A complete manual for the device Hobart P660, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart P660 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart P660.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart P660 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart P660, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart P660, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart P660 - which should help us in our first steps of using Hobart P660
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart P660
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart P660 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart P660?

Use the form below

If you did not solve your problem by using a manual Hobart P660, ask a question using the form below. If a user had a similar problem with Hobart P660 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)