-
Bushnell 118326 - page 1
U ser Manual Model#: 118326 LIT. #: 980917/0909 Digit al Camera binoCular ...
-
Bushnell 118326 - page 2
2 Camera and Binocular Parts Guide (I) USB Port (H) Remote Jack (J) Card Slot (G) Battery Compartment (M) Camera Lens (L) SNAP Button (K) Binocular Focus (A) LCD Displa y (D) 5-way Keypad w/ “Enter” , Left/Right, Plus/Minus (F) Diopter Adjustment (B) ON/OFF Button (C) MENU Button (E) Reticle Focus ...
-
Bushnell 118326 - page 3
3 1) T he SyncFocus is pow ered by two AAA ba tteries (not included). Insert batt eries int o the compartment (G) , using the polarity marks inside for refer ence. A power met er in the lower left corner of the display indicates battery condition. 2) Inser t an SD card into slot (J) if greater storage is desired. The card will click into place. Y o ...
-
Bushnell 118326 - page 4
4 T o stop recording the video, press the SNAP button again. By default, videos are recorded as a 15 second loop (“instant replay”). T o change this, press MENU -the rst item is “Resolution” . Press Enter , then select “Video Size” . Use the Plus/Minus keys to select a dierent video resolution and fr ame rat e combina tion (which ...
-
Bushnell 118326 - page 5
5 Loading Batteries T ur n the SyncF ocus o ver , slide open the batter y cover as indicated by the arro w , r emove and set aside . Insert 2 AAA Alkaline or Lithium batteries into the compartment (G) in the direction indicated inside, then replace the cover , sliding it back into place until it clicks. Note: Rechargeable NiMh type batteries may al ...
-
Bushnell 118326 - page 6
6 BASIC SETUP Setting the Date and Time/Date Stamp F eature Y ou may want to go into the main options menu and set the correct date and time before beginning to take photos (or turn o the date stamp featur e, as the default setting is “ on”). T o set date and time: Raise the LCD displa y and press the 1. ON/OFF (B) button. Press 2. MENU (C) ...
-
Bushnell 118326 - page 7
7 Setting the Reticle Focus and Diopter A djustment Before you begin tak ing photos, a few simple, one -time adjustments should be made to ensure that you can get sharp photos of any subject by just using the main focus knob on the binoculars. This process will compensate for an y variations in the eyesight or vision of the individual user: Leav e ...
-
Bushnell 118326 - page 8
8 Once set, note the number on the left and right binocular tubes that the index mark on each eyecup is lined up with. With the reticle f ocus and diopter adjustment set to these positions, you should be able to get sharp photos/videos of a subject at any distance by simply adjusting the center focus knob while you look through the binocular optics ...
-
Bushnell 118326 - page 9
9 T AKING STILL PHOTOS After completing the basic and Syncfocus setups as described in the previous pages, you are ready to take a photo: Raise the L CD display 1. (A) and br iey press and release the ON/OFF butt on-the startup screen will appear , followed by the live image from the camera lens. The display also shows the battery condition, num ...
-
Bushnell 118326 - page 10
10 The “r emaining photos ” 4-digit counter in the low er left corner of the display abo ve the batter y indicator 5. will drop by one number after each photo (or two, depending on your subject and settings) is taken. Once it reaches “0000” , and the display indicates “M emory Full !” when SNAP is pressed, you are out of memory (storage ...
-
Bushnell 118326 - page 11
11 SHOOTING VIDEOS SET TING/USING VIDEO MODE T o switch from still photo to video mode, press the Right arrow key 3 times, until the red movie camera icon is display ed at the top right area of the L CD (see “LCD Preview Display Icons” , #10 ). Y ou are now in Video Mode. Press SNAP to star t recording a new video clip, and press it again ...
-
Bushnell 118326 - page 12
12 L CD Preview Displa y Icons # Icon 1 Battery Indicator (full battery shown) 2 # of Photos Remaining (based on unused internal or card memory) 3 Internal or Card Memory 4 White Balance Setting ( A uto W hite B alance shown) 5 Exposure Meter P attern setting 6 Photo Resolution setting (Pix els) 7 Photo Quality setting (File C ompression) 8 Self T ...
-
Bushnell 118326 - page 13
13 Using the Main Menu- Options and Settings As mentioned ear lier in this manual, your SyncFocus is already set for high resolution and quality right out of the box. Exposure , white balance, and other variables are set automatically. This means that you will get good results for most subjec ts and lighting without the need to go into the menu to ...
-
Bushnell 118326 - page 14
14 OPTION SETTINGS DESCRIPTION Resolution ( Video Size) 640x480 30F Loop , 640x480 30F Norm, 640x480 15F Loop , 640x480 15F Norm, 320x240 30F Loop , 320x240 30F Norm, 320x240 15F Loop , 320x240 15F Norm “640x480” or “320x240”=resolution in pix els per video frame . Higher resolution=more detail. “30F” or “15F”=frame rate in frames p ...
-
Bushnell 118326 - page 15
15 OPTION SETTINGS DESCRIPTION White Balance Auto , Dayligh t, Cloudy , Fluoresc ent, Tungsten Sets the referenc e for neutral white, so that colors are reproduced correctly . I f “ Auto” does not provide good results, try the setting that matches the light source . Meter W eight , Center , Average Sets what area of the image frame is used to d ...
-
Bushnell 118326 - page 16
16 OPTION SETTINGS DESCRIPTION Date Stamp MM/DD/YY , YY/MM/DD, OFF Use the rst two settings if you want the dat e and time imprinted in the lower right corner of all y our photos-you have the option of month rst or y ear rst formats. The time will also be included-only 24 hr format is available. T o prevent imprinting the dat e and time, h ...
-
Bushnell 118326 - page 17
17 OPTION SETTINGS DESCRIPTION Delete One OK , Cancel Highlight “OK” and press Enter to delete the currently displayed photo or video . If pressed accidently , highlight “CANCEL ” and press Enter . Format OK, Canc el Same as above except deletes entir e contents of internal or card memory. When an SD card is inserted that has been used prev ...
-
Bushnell 118326 - page 18
18 1. T urn on the SyncF ocus (press ON/OFF ). Connect the supplied cable to the USB por t (I) below the SD car d slot on the SyncF ocus ( pull down the rubb er cover ap-please refer to the “Camera and Binocular Par ts Guide” page ), then connect the other end directly to a main USB port on your computer-do not use front panel/keyboard USB p ...
-
Bushnell 118326 - page 19
19 5. After the photos are transferred to your computer , you can disconnect the SyncF ocus. Windows 2000 may produce a screen warning that you have disconnected a USB device without stopping or ejecting the “ disk ” rst (your photo les will not be harmed). If so, check the bo x that adds an icon t o your system tra y or taskbar . Then ne ...
-
Bushnell 118326 - page 20
Specications and designs are subject to change without any notice or obligation on the part of the manufacturer . FCC Compliance Statement: is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to par t 15 of the FCC Rules. ese limits are designed to provide reasonable protection against ha ...
-
Bushnell 118326 - page 21
©2009 Bushnell Outdoor Products For further qu estions or additional information please contact: Bushnell Outdoor Products 9200 Cody , Overland Park, Kansas 66214 (800) 423-3537 • www .bushnell.com INNOV A TION THA T THRIVES OUTSIDE ...
Hai una domanda su Bushnell 118326?
Utilizza il modulo sottostante
Se non hai risolto il problema con Bushnell 118326 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Bushnell 118326 è probabile che voglia condividere il modo di risolverlo.