Bushnell 118326の取扱説明書

21ページ 0.91 mb
ダウンロード

ページに移動 of 21

Summary
  • Bushnell 118326 - page 1

    U ser Manual Model#: 118326 LIT. #: 980917/0909 Digit al Camera binoCular ...

  • Bushnell 118326 - page 2

    2 Camera and Binocular Parts Guide (I) USB Port (H) Remote Jack (J) Card Slot (G) Battery Compartment (M) Camera Lens (L) SNAP Button (K) Binocular Focus (A) LCD Displa y (D) 5-way Keypad w/ “Enter” , Left/Right, Plus/Minus (F) Diopter Adjustment (B) ON/OFF Button (C) MENU Button (E) Reticle Focus ...

  • Bushnell 118326 - page 3

    3 1) T he SyncFocus is pow ered by two AAA ba tteries (not included). Insert batt eries int o the compartment (G) , using the polarity marks inside for refer ence. A power met er in the lower left corner of the display indicates battery condition. 2) Inser t an SD card into slot (J) if greater storage is desired. The card will click into place. Y o ...

  • Bushnell 118326 - page 4

    4 T o stop recording the video, press the SNAP button again. By default, videos are recorded as a 15 second loop (“instant replay”). T o change this, press MENU -the rst item is “Resolution” . Press Enter , then select “Video Size” . Use the Plus/Minus keys to select a dierent video resolution and fr ame rat e combina tion (which ...

  • Bushnell 118326 - page 5

    5 Loading Batteries T ur n the SyncF ocus o ver , slide open the batter y cover as indicated by the arro w , r emove and set aside . Insert 2 AAA Alkaline or Lithium batteries into the compartment (G) in the direction indicated inside, then replace the cover , sliding it back into place until it clicks. Note: Rechargeable NiMh type batteries may al ...

  • Bushnell 118326 - page 6

    6 BASIC SETUP Setting the Date and Time/Date Stamp F eature Y ou may want to go into the main options menu and set the correct date and time before beginning to take photos (or turn o the date stamp featur e, as the default setting is “ on”). T o set date and time: Raise the LCD displa y and press the 1. ON/OFF (B) button. Press 2. MENU (C) ...

  • Bushnell 118326 - page 7

    7 Setting the Reticle Focus and Diopter A djustment Before you begin tak ing photos, a few simple, one -time adjustments should be made to ensure that you can get sharp photos of any subject by just using the main focus knob on the binoculars. This process will compensate for an y variations in the eyesight or vision of the individual user: Leav e ...

  • Bushnell 118326 - page 8

    8 Once set, note the number on the left and right binocular tubes that the index mark on each eyecup is lined up with. With the reticle f ocus and diopter adjustment set to these positions, you should be able to get sharp photos/videos of a subject at any distance by simply adjusting the center focus knob while you look through the binocular optics ...

  • Bushnell 118326 - page 9

    9 T AKING STILL PHOTOS After completing the basic and Syncfocus setups as described in the previous pages, you are ready to take a photo: Raise the L CD display 1. (A) and br iey press and release the ON/OFF butt on-the startup screen will appear , followed by the live image from the camera lens. The display also shows the battery condition, num ...

  • Bushnell 118326 - page 10

    10 The “r emaining photos ” 4-digit counter in the low er left corner of the display abo ve the batter y indicator 5. will drop by one number after each photo (or two, depending on your subject and settings) is taken. Once it reaches “0000” , and the display indicates “M emory Full !” when SNAP is pressed, you are out of memory (storage ...

  • Bushnell 118326 - page 11

    11 SHOOTING VIDEOS SET TING/USING VIDEO MODE T o switch from still photo to video mode, press the Right arrow key 3 times, until the red movie camera icon is display ed at the top right area of the L CD (see “LCD Preview Display Icons” , #10 ). Y ou are now in Video Mode. Press SNAP to star t recording a new video clip, and press it again ...

  • Bushnell 118326 - page 12

    12 L CD Preview Displa y Icons # Icon 1 Battery Indicator (full battery shown) 2 # of Photos Remaining (based on unused internal or card memory) 3 Internal or Card Memory 4 White Balance Setting ( A uto W hite B alance shown) 5 Exposure Meter P attern setting 6 Photo Resolution setting (Pix els) 7 Photo Quality setting (File C ompression) 8 Self T ...

  • Bushnell 118326 - page 13

    13 Using the Main Menu- Options and Settings As mentioned ear lier in this manual, your SyncFocus is already set for high resolution and quality right out of the box. Exposure , white balance, and other variables are set automatically. This means that you will get good results for most subjec ts and lighting without the need to go into the menu to ...

  • Bushnell 118326 - page 14

    14 OPTION SETTINGS DESCRIPTION Resolution ( Video Size) 640x480 30F Loop , 640x480 30F Norm, 640x480 15F Loop , 640x480 15F Norm, 320x240 30F Loop , 320x240 30F Norm, 320x240 15F Loop , 320x240 15F Norm “640x480” or “320x240”=resolution in pix els per video frame . Higher resolution=more detail. “30F” or “15F”=frame rate in frames p ...

  • Bushnell 118326 - page 15

    15 OPTION SETTINGS DESCRIPTION White Balance Auto , Dayligh t, Cloudy , Fluoresc ent, Tungsten Sets the referenc e for neutral white, so that colors are reproduced correctly . I f “ Auto” does not provide good results, try the setting that matches the light source . Meter W eight , Center , Average Sets what area of the image frame is used to d ...

  • Bushnell 118326 - page 16

    16 OPTION SETTINGS DESCRIPTION Date Stamp MM/DD/YY , YY/MM/DD, OFF Use the rst two settings if you want the dat e and time imprinted in the lower right corner of all y our photos-you have the option of month rst or y ear rst formats. The time will also be included-only 24 hr format is available. T o prevent imprinting the dat e and time, h ...

  • Bushnell 118326 - page 17

    17 OPTION SETTINGS DESCRIPTION Delete One OK , Cancel Highlight “OK” and press Enter to delete the currently displayed photo or video . If pressed accidently , highlight “CANCEL ” and press Enter . Format OK, Canc el Same as above except deletes entir e contents of internal or card memory. When an SD card is inserted that has been used prev ...

  • Bushnell 118326 - page 18

    18 1. T urn on the SyncF ocus (press ON/OFF ). Connect the supplied cable to the USB por t (I) below the SD car d slot on the SyncF ocus ( pull down the rubb er cover ap-please refer to the “Camera and Binocular Par ts Guide” page ), then connect the other end directly to a main USB port on your computer-do not use front panel/keyboard USB p ...

  • Bushnell 118326 - page 19

    19 5. After the photos are transferred to your computer , you can disconnect the SyncF ocus. Windows 2000 may produce a screen warning that you have disconnected a USB device without stopping or ejecting the “ disk ” rst (your photo les will not be harmed). If so, check the bo x that adds an icon t o your system tra y or taskbar . Then ne ...

  • Bushnell 118326 - page 20

    Specications and designs are subject to change without any notice or obligation on the part of the manufacturer . FCC Compliance Statement: is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to par t 15 of the FCC Rules. ese limits are designed to provide reasonable protection against ha ...

  • Bushnell 118326 - page 21

    ©2009 Bushnell Outdoor Products For further qu estions or additional information please contact: Bushnell Outdoor Products 9200 Cody , Overland Park, Kansas 66214 (800) 423-3537 • www .bushnell.com INNOV A TION THA T THRIVES OUTSIDE ...

メーカー Bushnell カテゴリー Binoculars

Bushnell 118326のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 118326の取扱説明書
- Bushnellの製品カード
- パンフレット
- またはBushnell 118326の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Bushnell 118326の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Bushnell 118326の取り付け説明書、サービスマニュアル、簡易説明書、またはBushnell 118326のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Bushnell 118326の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Bushnell 118326デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBushnell 118326を使用するのを助ける技術的文書のことです。説明書は通常、全てのBushnell 118326ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Bushnellの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Bushnell 118326の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBushnell 118326の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Bushnell 118326に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Bushnell 118326デバイスの基本機能を使うにあたってのヒント。 Bushnell 118326のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Bushnell 118326に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBushnell 118326のメーカー/サービスへの連絡先に関する情報。

Bushnell 118326についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもBushnell 118326の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBushnell 118326で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)