Italiano dropdown-ico

Manuale per l’uso RIDGID TP1300LS

24 pagine 0.7 mb
Scarica

Vai alla pagina of 24

Summary
  • RIDGID TP1300LS - page 1

    Your new planer has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank y ...

  • RIDGID TP1300LS - page 2

    2 T ABLE OF CONTENTS  Introduction ...................................................................................................................................................................... 2  Rules for Safe Operation ....................................................................................................... .......... ...

  • RIDGID TP1300LS - page 3

    3 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYM ...

  • RIDGID TP1300LS - page 4

    4 RULES FOR SAFE OPERA TION  KEEP THE WORK AREA CLEAN. Cluttered work areas and work benches invite accidents. DO NOT leave tools or pieces of wood on the planer while it is in operation.  DO NOT USE IN DANGEROUS ENVIRONMENTS. Do not use power tools near gasoline or other flammable liquids, in damp or wet locations, or expose them to rain. Ke ...

  • RIDGID TP1300LS - page 5

    5 RULES FOR SAFE OPERA TION  NEVER PERFORM THE PLANING OPERATION with the cutter head or cutter guard removed.  NEVER MAKE A PLANING CUT deeper than 1/8 in. (3 mm).  DO NOT PLANE MATERIAL shorter than 14 in. (356 mm) or narrower than 3/4 in. (19 mm).  MAINTAIN THE PROPER RELATIONSHIP between the infeed and outfeed surfaces and the cutte ...

  • RIDGID TP1300LS - page 6

    6 ELECTRICAL EXTENSION CORDS Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool's plug. When using a power tool at a considerable distance from the power source, use an extension cord heavy enough to carry the current that the tool will draw. An undersized extension cord will cause a d ...

  • RIDGID TP1300LS - page 7

    7 SPECIFICATIONS Feed Rate ...................................................................................................................... ............................................ 26 FPM Input ......................................................................................................................... 1 20 volts, 60Hz, AC Onl ...

  • RIDGID TP1300LS - page 8

    8 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 KNIFE TOOL 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 FEA TURES Fig. 2 KNOW YOUR PORTABLE PLANER See Figure 2. Before attempting to use your planer, familiarize yourself with all operating Features and Rules for Safe Opera ...

  • RIDGID TP1300LS - page 9

    9 T OOLS NEEDED The following tools (not included) are needed for checking adjustments of your planer: 13 mm COMBINATION WRENCH (2) FRAMING SQUARE  Do not discard the packing materials until you have carefully inspected the tool, identified all loose parts, and satisfactorily operated your new tool.  Examine all parts to make sure no breakage ...

  • RIDGID TP1300LS - page 10

    10 PULL OUT TO LOCK KNIFE TOOL Fig. 4 WARNING: The use of attachments or accessories not listed might be hazardous and could cause serious personal injury. LOOSE P ARTS LIST The following items are included with your Planer:  Upper Brace, long (2)  Upper Brace, short (2)  Lower Brace, long (2)  Lower Brace, short (2)  Upper Leg (4) ? ...

  • RIDGID TP1300LS - page 11

    11 ASSEMBL Y ASSEMBLING LEG STAND See Figures 5 and 6.  Separate brace pieces from leg pieces. There are a total of 16 pieces: 8 brace pieces and 8 leg pieces.  Remove the following hardware from the hardware bag: 32 carriage bolts (M8 x 1-1/4 in.) 4 rubber feet 4 hex bolts (M8 x 1-1/4 in. x 65) 4 flat washers 36 flanged hex nuts (M8 x 1-1/4 ...

  • RIDGID TP1300LS - page 12

    12 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 ASSEMBL Y LOWER LEG LOWER BRACE, SHORT WARNING: To prevent ...

  • RIDGID TP1300LS - page 13

    13 ASSEMBL Y Fig. 9 Fig. 10 MOUNTING PLANER TO WORKBENCH If your planer is to be used in a permanent location, it is recommended you secure it to a workbench or other stable surface. When mounting the planer to a workbench, holes should be drilled through the supporting surface of the workbench.  Mark holes on workbench where planer is to be mou ...

  • RIDGID TP1300LS - page 14

    1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 Fig. 12 LE ...

  • RIDGID TP1300LS - page 15

    6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 THICKNESS SCALE ADJUSTMENT See Figure 13. Located on the right front of the planer, the thickness scale shows the depth of the finished workpiece. Inaccurate cuts can be prevented by routinely checking the alignment of the thickness scale.  Table extensions must be level with planer table.  ...

  • RIDGID TP1300LS - page 16

    RESET OFF O P U L L ON I P U S H RESET OFF O P U L L ON I P U S H PULL OUT TO LOCK RESET OFF O P U L L ON I P U S H PULL OUT TO LOCK PULL OUT TO LOCK OPERA TION ON GETTING STARTED Before turning on the planer, check for loose fasteners, fittings, or hardware. Be sure the dust cover is securely mounted and that the blade cutter rotates freely. Lower ...

  • RIDGID TP1300LS - page 17

    1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 OPERA TION F ...

  • RIDGID TP1300LS - page 18

    MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other part may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, ca ...

  • RIDGID TP1300LS - page 19

    MAINTENANCE  If you are changing to the second side of the blade, rotate the blade “end for end” keeping the same flat side down. This correctly positions the blade for reinstallation.  Lightly oil new cutter blade.  Push the installed blade in firmly. Check that the blade edge is parallel to the cutter head slot.  Securely retighte ...

  • RIDGID TP1300LS - page 20

    MAINTENANCE GENERAL MAINTENANCE WARNING: Always begin by disconnecting the power supply.  Periodically check all clamps, nuts, bolts, and screws for tightness and condition. Make sure the throat plate is in good condition and in position.  Stop the machine and recheck the cutter head gib screws and blades for tightness after about 50 hours of ...

  • RIDGID TP1300LS - page 21

    TROUBLESHOOTING 1. Replace, turn or sharpen cutter blades 2. Butt pieces end-to-end as they are fed into planer 3. Securely tighten mounting hardware 4. Lock cutter head 1. Reduce depth of cut 2. Feed other end of board first 3. Replace, turn or sharpen cutter blades 1. Dry wood before planing 2. Replace, turn or sharpen cutter blades 3. Reduce dep ...

  • RIDGID TP1300LS - page 22

    W ARRANTY 22 This product is manufactured by One World T echnologies, Inc., under a trademark license from Ridgid, Inc. All warranty communications should be directed to One World T echnologies, Inc., attn: RIDGID handheld and stationary power tool technical service at (toll free) 1-866-539-1710. 90-DA Y SA TISF ACTION GUARANTEE POLICY During the f ...

  • RIDGID TP1300LS - page 23

    NOTES 23 ...

  • RIDGID TP1300LS - page 24

    24 983000-316 4 -30-04 OPERA T OR'S MANUAL 13 in. THICKNESS PLANER TP1300LS CUSTOMER SERVICE INFORMATION For parts or service, contact your nearest Ridgid authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or vi ...

Fabbricante RIDGID Categoria Planer

I documenti che otteniamo dal fabbricante del dispositivoRIDGID TP1300LS possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici RIDGID
- manuali per l’uso TP1300LS
- schede prodotto RIDGID
- opuscoli
- o etichette energetiche RIDGID TP1300LS
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso RIDGID TP1300LS.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione RIDGID TP1300LS, manuali di manutenzione, brevi manuali o manuali utente RIDGID TP1300LS. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto RIDGID TP1300LS.

Manuali per l’uso simili

Manuale completo del dispositivo RIDGID TP1300LS, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare RIDGID TP1300LS dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti RIDGID TP1300LS.

Il manuale per l’uso completo RIDGID, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale RIDGID TP1300LS - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice RIDGID TP1300LS, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per RIDGID TP1300LS che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo RIDGID TP1300LS - che ci dovrebbe aiutare nei primi passi durante l'uso RIDGID TP1300LS
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del RIDGID TP1300LS
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio RIDGID TP1300LS in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su RIDGID TP1300LS?

Utilizza il modulo sottostante

Se non hai risolto il problema con RIDGID TP1300LS con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con RIDGID TP1300LS è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)