English dropdown-ico

Manual RIDGID TP1300LS

24 pages 0.7 mb
Download

Go to site of 24

Summary
  • RIDGID TP1300LS - page 1

    Your new planer has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank y ...

  • RIDGID TP1300LS - page 2

    2 T ABLE OF CONTENTS  Introduction ...................................................................................................................................................................... 2  Rules for Safe Operation ....................................................................................................... .......... ...

  • RIDGID TP1300LS - page 3

    3 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYM ...

  • RIDGID TP1300LS - page 4

    4 RULES FOR SAFE OPERA TION  KEEP THE WORK AREA CLEAN. Cluttered work areas and work benches invite accidents. DO NOT leave tools or pieces of wood on the planer while it is in operation.  DO NOT USE IN DANGEROUS ENVIRONMENTS. Do not use power tools near gasoline or other flammable liquids, in damp or wet locations, or expose them to rain. Ke ...

  • RIDGID TP1300LS - page 5

    5 RULES FOR SAFE OPERA TION  NEVER PERFORM THE PLANING OPERATION with the cutter head or cutter guard removed.  NEVER MAKE A PLANING CUT deeper than 1/8 in. (3 mm).  DO NOT PLANE MATERIAL shorter than 14 in. (356 mm) or narrower than 3/4 in. (19 mm).  MAINTAIN THE PROPER RELATIONSHIP between the infeed and outfeed surfaces and the cutte ...

  • RIDGID TP1300LS - page 6

    6 ELECTRICAL EXTENSION CORDS Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool's plug. When using a power tool at a considerable distance from the power source, use an extension cord heavy enough to carry the current that the tool will draw. An undersized extension cord will cause a d ...

  • RIDGID TP1300LS - page 7

    7 SPECIFICATIONS Feed Rate ...................................................................................................................... ............................................ 26 FPM Input ......................................................................................................................... 1 20 volts, 60Hz, AC Onl ...

  • RIDGID TP1300LS - page 8

    8 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 KNIFE TOOL 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 FEA TURES Fig. 2 KNOW YOUR PORTABLE PLANER See Figure 2. Before attempting to use your planer, familiarize yourself with all operating Features and Rules for Safe Opera ...

  • RIDGID TP1300LS - page 9

    9 T OOLS NEEDED The following tools (not included) are needed for checking adjustments of your planer: 13 mm COMBINATION WRENCH (2) FRAMING SQUARE  Do not discard the packing materials until you have carefully inspected the tool, identified all loose parts, and satisfactorily operated your new tool.  Examine all parts to make sure no breakage ...

  • RIDGID TP1300LS - page 10

    10 PULL OUT TO LOCK KNIFE TOOL Fig. 4 WARNING: The use of attachments or accessories not listed might be hazardous and could cause serious personal injury. LOOSE P ARTS LIST The following items are included with your Planer:  Upper Brace, long (2)  Upper Brace, short (2)  Lower Brace, long (2)  Lower Brace, short (2)  Upper Leg (4) ? ...

  • RIDGID TP1300LS - page 11

    11 ASSEMBL Y ASSEMBLING LEG STAND See Figures 5 and 6.  Separate brace pieces from leg pieces. There are a total of 16 pieces: 8 brace pieces and 8 leg pieces.  Remove the following hardware from the hardware bag: 32 carriage bolts (M8 x 1-1/4 in.) 4 rubber feet 4 hex bolts (M8 x 1-1/4 in. x 65) 4 flat washers 36 flanged hex nuts (M8 x 1-1/4 ...

  • RIDGID TP1300LS - page 12

    12 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 ASSEMBL Y LOWER LEG LOWER BRACE, SHORT WARNING: To prevent ...

  • RIDGID TP1300LS - page 13

    13 ASSEMBL Y Fig. 9 Fig. 10 MOUNTING PLANER TO WORKBENCH If your planer is to be used in a permanent location, it is recommended you secure it to a workbench or other stable surface. When mounting the planer to a workbench, holes should be drilled through the supporting surface of the workbench.  Mark holes on workbench where planer is to be mou ...

  • RIDGID TP1300LS - page 14

    1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 Fig. 12 LE ...

  • RIDGID TP1300LS - page 15

    6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 THICKNESS SCALE ADJUSTMENT See Figure 13. Located on the right front of the planer, the thickness scale shows the depth of the finished workpiece. Inaccurate cuts can be prevented by routinely checking the alignment of the thickness scale.  Table extensions must be level with planer table.  ...

  • RIDGID TP1300LS - page 16

    RESET OFF O P U L L ON I P U S H RESET OFF O P U L L ON I P U S H PULL OUT TO LOCK RESET OFF O P U L L ON I P U S H PULL OUT TO LOCK PULL OUT TO LOCK OPERA TION ON GETTING STARTED Before turning on the planer, check for loose fasteners, fittings, or hardware. Be sure the dust cover is securely mounted and that the blade cutter rotates freely. Lower ...

  • RIDGID TP1300LS - page 17

    1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 1 Repeat Cut A - - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 OPERA TION F ...

  • RIDGID TP1300LS - page 18

    MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other part may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, ca ...

  • RIDGID TP1300LS - page 19

    MAINTENANCE  If you are changing to the second side of the blade, rotate the blade “end for end” keeping the same flat side down. This correctly positions the blade for reinstallation.  Lightly oil new cutter blade.  Push the installed blade in firmly. Check that the blade edge is parallel to the cutter head slot.  Securely retighte ...

  • RIDGID TP1300LS - page 20

    MAINTENANCE GENERAL MAINTENANCE WARNING: Always begin by disconnecting the power supply.  Periodically check all clamps, nuts, bolts, and screws for tightness and condition. Make sure the throat plate is in good condition and in position.  Stop the machine and recheck the cutter head gib screws and blades for tightness after about 50 hours of ...

  • RIDGID TP1300LS - page 21

    TROUBLESHOOTING 1. Replace, turn or sharpen cutter blades 2. Butt pieces end-to-end as they are fed into planer 3. Securely tighten mounting hardware 4. Lock cutter head 1. Reduce depth of cut 2. Feed other end of board first 3. Replace, turn or sharpen cutter blades 1. Dry wood before planing 2. Replace, turn or sharpen cutter blades 3. Reduce dep ...

  • RIDGID TP1300LS - page 22

    W ARRANTY 22 This product is manufactured by One World T echnologies, Inc., under a trademark license from Ridgid, Inc. All warranty communications should be directed to One World T echnologies, Inc., attn: RIDGID handheld and stationary power tool technical service at (toll free) 1-866-539-1710. 90-DA Y SA TISF ACTION GUARANTEE POLICY During the f ...

  • RIDGID TP1300LS - page 23

    NOTES 23 ...

  • RIDGID TP1300LS - page 24

    24 983000-316 4 -30-04 OPERA T OR'S MANUAL 13 in. THICKNESS PLANER TP1300LS CUSTOMER SERVICE INFORMATION For parts or service, contact your nearest Ridgid authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or vi ...

Manufacturer RIDGID Category Planer

Documents that we receive from a manufacturer of a RIDGID TP1300LS can be divided into several groups. They are, among others:
- RIDGID technical drawings
- TP1300LS manuals
- RIDGID product data sheets
- information booklets
- or energy labels RIDGID TP1300LS
All of them are important, but the most important information from the point of view of use of the device are in the user manual RIDGID TP1300LS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals RIDGID TP1300LS, service manual, brief instructions and user manuals RIDGID TP1300LS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product RIDGID TP1300LS.

Similar manuals

A complete manual for the device RIDGID TP1300LS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use RIDGID TP1300LS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of RIDGID TP1300LS.

A complete RIDGID manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual RIDGID TP1300LS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the RIDGID TP1300LS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the RIDGID TP1300LS, that we can find in the current document
3. Tips how to use the basic functions of the device RIDGID TP1300LS - which should help us in our first steps of using RIDGID TP1300LS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with RIDGID TP1300LS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of RIDGID TP1300LS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning RIDGID TP1300LS?

Use the form below

If you did not solve your problem by using a manual RIDGID TP1300LS, ask a question using the form below. If a user had a similar problem with RIDGID TP1300LS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)