Italiano dropdown-ico

Manuale per l’uso HP (Hewlett-Packard) Pro100B

27 pagine 0.71 mb
Scarica

Vai alla pagina of 27

Summary
  • HP (Hewlett-Packard) Pro100B - page 1

    Intel Ether Express Pro100B Adapter Installation Guide Pro100B.book Page 1 Friday, December 10, 19 99 4:02 PM ...

  • HP (Hewlett-Packard) Pro100B - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this m aterial, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for inci ...

  • HP (Hewlett-Packard) Pro100B - page 3

    Contents 1 Read This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before installing the net work adapter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How to Forcibly Modify Resources Allocated to the Intel EtherExpress Pro100B PC adapter . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Pro100B - page 4

    2 Connecting to a Novell NetW are 5.0 Server . . . . . . . . . . . . . . . . . . . 18 Microsoft Windows 98 2nd edition Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Pro100B - page 5

    3 Read This First 1 Read This First Before installing the network adapter: • If your OS is Windows 95 SR2.5, go into the BIOS setup and set PnP OS field to YES. • If your OS is Windows NT 4.0, go into the BIOS setup and set PnP OS field to NO. • If your OS is Windows 98 2 nd edition, go into the BIOS setup and set PnP OS field to YES. • If ...

  • HP (Hewlett-Packard) Pro100B - page 6

    4 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 95 SR2.5 2 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 SR2.5 Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Wi ...

  • HP (Hewlett-Packard) Pro100B - page 7

    5 Connecting to a Novell NetWare 5.0 Server Microsoft Window s 95 SR2.5 12 Select either “ Typical ” or “ Custom ” and click on “ Install ” . Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advance d user. When prompted for options during installation, ask your Network Administr ...

  • HP (Hewlett-Packard) Pro100B - page 8

    6 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 95 SR2.5 Problem 2 W indows 95 will lose all network connections when t he system comes out of suspend mode. This APM problem is known and acknowledged by Microsoft under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/ Q238/8/71.asp) T o prevent this problem: 1 From t ...

  • HP (Hewlett-Packard) Pro100B - page 9

    7 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Window s 95 SR2.5 3 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and ...

  • HP (Hewlett-Packard) Pro100B - page 10

    8 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Wind ows 95 SR2.5 Known Problems Problem 1 W indows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5 driver) for the “ Intel PRO/100B PCI adapter ” , from the Intel driver diskette during installation . This driver will not succes sfully install in Microsof t W indows 95 SR ...

  • HP (Hewlett-Packard) Pro100B - page 11

    9 Connecting to a Novell NetWare 4.11 Server Microsoft Window s 95 SR2.5 4 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to W ...

  • HP (Hewlett-Packard) Pro100B - page 12

    10 Connecting to a Novell NetWare 4.11 Server Microsoft Wind ows 95 SR2.5 12 Select either “ Typical ” or “ Custom ” and click on “ Install ” . Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installation, ask your Network Administ ...

  • HP (Hewlett-Packard) Pro100B - page 13

    11 Connecting to a Novell NetWare 4.11 Server Microsoft Window s 95 SR2.5 Problem 2 W indows 95 will lose all network connections when t he system comes out of suspend mode. This APM problem is known and acknowledged by Microsoft under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/ Q238/8/71.asp) T o prevent this problem: 1 From ...

  • HP (Hewlett-Packard) Pro100B - page 14

    12 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 5 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the ma ...

  • HP (Hewlett-Packard) Pro100B - page 15

    13 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrator ...

  • HP (Hewlett-Packard) Pro100B - page 16

    14 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 6 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Pow ...

  • HP (Hewlett-Packard) Pro100B - page 17

    15 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Adminis ...

  • HP (Hewlett-Packard) Pro100B - page 18

    16 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 7 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the ...

  • HP (Hewlett-Packard) Pro100B - page 19

    17 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrato ...

  • HP (Hewlett-Packard) Pro100B - page 20

    18 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 98 2nd editio n 8 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 2 nd edition Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine ...

  • HP (Hewlett-Packard) Pro100B - page 21

    19 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2nd edition 9 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2 nd edition Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on th ...

  • HP (Hewlett-Packard) Pro100B - page 22

    20 Connecting to a Novell NetWare 4.11 Server Microsoft Wind ows 98 2nd editio n 10 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 98 2 nd edition Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the mach ...

  • HP (Hewlett-Packard) Pro100B - page 23

    21 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 11 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machin ...

  • HP (Hewlett-Packard) Pro100B - page 24

    22 Connecting to a Windows NT 4.0 Server Microsoft Windows fo r Workgroups v3.11 13 Click “ OK ” at the “ Network Setup ” dialog b ox. 14 If needed, enter changes to the “ Microsoft Windows Network Names ” dialog box and click “ OK ” . 15 Windows will prompt for the location of several files. Type the path to the file locations and ...

  • HP (Hewlett-Packard) Pro100B - page 25

    23 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 12 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on ...

  • HP (Hewlett-Packard) Pro100B - page 26

    24 Connecting to a Novell NetWare 4.11 Server Microsoft Windows fo r Workgroups v3.11 13 Insert the driver disk and click on “ Have Disk …” when prompted for drivers. 14 Type in the location of the 32-bit LAN driver and click “ Add ” . 15 Click “ Next ” to continue with the installation. 16 Modify the LAN adapter settings if needed an ...

  • HP (Hewlett-Packard) Pro100B - page 27

    V ers ion Number Rev 2. December 1999 Pro100B.book Page xxvi Friday, December 10, 1999 4:02 PM ...

Fabbricante HP (Hewlett-Packard) Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoHP (Hewlett-Packard) Pro100B possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici HP (Hewlett-Packard)
- manuali per l’uso Pro100B
- schede prodotto HP (Hewlett-Packard)
- opuscoli
- o etichette energetiche HP (Hewlett-Packard) Pro100B
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso HP (Hewlett-Packard) Pro100B.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione HP (Hewlett-Packard) Pro100B, manuali di manutenzione, brevi manuali o manuali utente HP (Hewlett-Packard) Pro100B. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto HP (Hewlett-Packard) Pro100B.

Manuali per l’uso simili

Manuale completo del dispositivo HP (Hewlett-Packard) Pro100B, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare HP (Hewlett-Packard) Pro100B dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti HP (Hewlett-Packard) Pro100B.

Il manuale per l’uso completo HP (Hewlett-Packard), dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale HP (Hewlett-Packard) Pro100B - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice HP (Hewlett-Packard) Pro100B, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per HP (Hewlett-Packard) Pro100B che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo HP (Hewlett-Packard) Pro100B - che ci dovrebbe aiutare nei primi passi durante l'uso HP (Hewlett-Packard) Pro100B
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del HP (Hewlett-Packard) Pro100B
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio HP (Hewlett-Packard) Pro100B in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su HP (Hewlett-Packard) Pro100B?

Utilizza il modulo sottostante

Se non hai risolto il problema con HP (Hewlett-Packard) Pro100B con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con HP (Hewlett-Packard) Pro100B è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)