English dropdown-ico

Manual HP (Hewlett-Packard) Pro100B

27 pages 0.71 mb
Download

Go to site of 27

Summary
  • HP (Hewlett-Packard) Pro100B - page 1

    Intel Ether Express Pro100B Adapter Installation Guide Pro100B.book Page 1 Friday, December 10, 19 99 4:02 PM ...

  • HP (Hewlett-Packard) Pro100B - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this m aterial, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for inci ...

  • HP (Hewlett-Packard) Pro100B - page 3

    Contents 1 Read This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before installing the net work adapter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How to Forcibly Modify Resources Allocated to the Intel EtherExpress Pro100B PC adapter . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Pro100B - page 4

    2 Connecting to a Novell NetW are 5.0 Server . . . . . . . . . . . . . . . . . . . 18 Microsoft Windows 98 2nd edition Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Pro100B - page 5

    3 Read This First 1 Read This First Before installing the network adapter: • If your OS is Windows 95 SR2.5, go into the BIOS setup and set PnP OS field to YES. • If your OS is Windows NT 4.0, go into the BIOS setup and set PnP OS field to NO. • If your OS is Windows 98 2 nd edition, go into the BIOS setup and set PnP OS field to YES. • If ...

  • HP (Hewlett-Packard) Pro100B - page 6

    4 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 95 SR2.5 2 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 SR2.5 Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Wi ...

  • HP (Hewlett-Packard) Pro100B - page 7

    5 Connecting to a Novell NetWare 5.0 Server Microsoft Window s 95 SR2.5 12 Select either “ Typical ” or “ Custom ” and click on “ Install ” . Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advance d user. When prompted for options during installation, ask your Network Administr ...

  • HP (Hewlett-Packard) Pro100B - page 8

    6 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 95 SR2.5 Problem 2 W indows 95 will lose all network connections when t he system comes out of suspend mode. This APM problem is known and acknowledged by Microsoft under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/ Q238/8/71.asp) T o prevent this problem: 1 From t ...

  • HP (Hewlett-Packard) Pro100B - page 9

    7 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Window s 95 SR2.5 3 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and ...

  • HP (Hewlett-Packard) Pro100B - page 10

    8 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Wind ows 95 SR2.5 Known Problems Problem 1 W indows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5 driver) for the “ Intel PRO/100B PCI adapter ” , from the Intel driver diskette during installation . This driver will not succes sfully install in Microsof t W indows 95 SR ...

  • HP (Hewlett-Packard) Pro100B - page 11

    9 Connecting to a Novell NetWare 4.11 Server Microsoft Window s 95 SR2.5 4 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 SR2.5 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to W ...

  • HP (Hewlett-Packard) Pro100B - page 12

    10 Connecting to a Novell NetWare 4.11 Server Microsoft Wind ows 95 SR2.5 12 Select either “ Typical ” or “ Custom ” and click on “ Install ” . Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installation, ask your Network Administ ...

  • HP (Hewlett-Packard) Pro100B - page 13

    11 Connecting to a Novell NetWare 4.11 Server Microsoft Window s 95 SR2.5 Problem 2 W indows 95 will lose all network connections when t he system comes out of suspend mode. This APM problem is known and acknowledged by Microsoft under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/ Q238/8/71.asp) T o prevent this problem: 1 From ...

  • HP (Hewlett-Packard) Pro100B - page 14

    12 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 5 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the ma ...

  • HP (Hewlett-Packard) Pro100B - page 15

    13 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrator ...

  • HP (Hewlett-Packard) Pro100B - page 16

    14 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 6 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Pow ...

  • HP (Hewlett-Packard) Pro100B - page 17

    15 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Adminis ...

  • HP (Hewlett-Packard) Pro100B - page 18

    16 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 7 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the ...

  • HP (Hewlett-Packard) Pro100B - page 19

    17 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 14 Complete the network card installation by clicking on “ Next ” . 15 Type in the path to your Windows NT files and click “ Continue ” . 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrato ...

  • HP (Hewlett-Packard) Pro100B - page 20

    18 Connecting to a Novell NetWare 5.0 Server Microsoft Wind ows 98 2nd editio n 8 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 2 nd edition Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine ...

  • HP (Hewlett-Packard) Pro100B - page 21

    19 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2nd edition 9 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2 nd edition Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on th ...

  • HP (Hewlett-Packard) Pro100B - page 22

    20 Connecting to a Novell NetWare 4.11 Server Microsoft Wind ows 98 2nd editio n 10 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 98 2 nd edition Requirement s Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the mach ...

  • HP (Hewlett-Packard) Pro100B - page 23

    21 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 11 Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machin ...

  • HP (Hewlett-Packard) Pro100B - page 24

    22 Connecting to a Windows NT 4.0 Server Microsoft Windows fo r Workgroups v3.11 13 Click “ OK ” at the “ Network Setup ” dialog b ox. 14 If needed, enter changes to the “ Microsoft Windows Network Names ” dialog box and click “ OK ” . 15 Windows will prompt for the location of several files. Type the path to the file locations and ...

  • HP (Hewlett-Packard) Pro100B - page 25

    23 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 12 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 Requirements Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on ...

  • HP (Hewlett-Packard) Pro100B - page 26

    24 Connecting to a Novell NetWare 4.11 Server Microsoft Windows fo r Workgroups v3.11 13 Insert the driver disk and click on “ Have Disk …” when prompted for drivers. 14 Type in the location of the 32-bit LAN driver and click “ Add ” . 15 Click “ Next ” to continue with the installation. 16 Modify the LAN adapter settings if needed an ...

  • HP (Hewlett-Packard) Pro100B - page 27

    V ers ion Number Rev 2. December 1999 Pro100B.book Page xxvi Friday, December 10, 1999 4:02 PM ...

Manufacturer HP (Hewlett-Packard) Category Network Card

Documents that we receive from a manufacturer of a HP (Hewlett-Packard) Pro100B can be divided into several groups. They are, among others:
- HP (Hewlett-Packard) technical drawings
- Pro100B manuals
- HP (Hewlett-Packard) product data sheets
- information booklets
- or energy labels HP (Hewlett-Packard) Pro100B
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP (Hewlett-Packard) Pro100B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP (Hewlett-Packard) Pro100B, service manual, brief instructions and user manuals HP (Hewlett-Packard) Pro100B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP (Hewlett-Packard) Pro100B.

Similar manuals

A complete manual for the device HP (Hewlett-Packard) Pro100B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP (Hewlett-Packard) Pro100B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP (Hewlett-Packard) Pro100B.

A complete HP (Hewlett-Packard) manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP (Hewlett-Packard) Pro100B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP (Hewlett-Packard) Pro100B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP (Hewlett-Packard) Pro100B, that we can find in the current document
3. Tips how to use the basic functions of the device HP (Hewlett-Packard) Pro100B - which should help us in our first steps of using HP (Hewlett-Packard) Pro100B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP (Hewlett-Packard) Pro100B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP (Hewlett-Packard) Pro100B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP (Hewlett-Packard) Pro100B?

Use the form below

If you did not solve your problem by using a manual HP (Hewlett-Packard) Pro100B, ask a question using the form below. If a user had a similar problem with HP (Hewlett-Packard) Pro100B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)