Italiano dropdown-ico

Manuale per l’uso Alvarez SA1232z

19 pagine 1.25 mb
Scarica

Vai alla pagina of 19

Summary
  • Alvarez SA1232z - page 1

    1 SA1232z REPAIR MANUAL ...

  • Alvarez SA1232z - page 2

    2 These instructions are intended to help restore any ailing SA1232z Active Loudspeaker back to factory working conditions. They show how to remove and replace the drivers and the ampli fi er assembly. Please contact Mackie Tech Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration. The ...

  • Alvarez SA1232z - page 3

    3 Led PCB replacement: 3 Carefully begin to remove the grill. Do not fully remove the grill as the cable is still fi rmly attached to the led PCB assembly. A fl at head screwdriver may aid in loosening the grill from the cabinet. 2 Keep the ten screws in a safe place. 4 Carefully remove the cable attached to the led PCB assembly. 1 Five screws ne ...

  • Alvarez SA1232z - page 4

    4 6 Carefully remove the led PCB assembly from the back side of the grill. Led PCB replacement continued: 7 The hard part is done, the rest is easy! Place the new led PCB assembly (part #0007334) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the SA1232z and the led should light up. Congratulations, you just r ...

  • Alvarez SA1232z - page 5

    5 Bottom woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the bottom woofer. 2 Eight screws and washers need to be removed from the woofer using the phillips head screwdriver. 3 Keep the eight screws and fl at washers in a safe place. Note: There are two differe ...

  • Alvarez SA1232z - page 6

    6 Bottom woofer replacement continued: 6 The picture on the right shows what the SA1232z looks like with the grill and bottom woofer removed . Place the new woofer (part #0013920) where the old one was. Follow the same steps as above, but backwards 5 to 1, making sure to keep the led PCB assembly cable in front of the woofer. Power up the SA1232z a ...

  • Alvarez SA1232z - page 7

    7 Top woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the top woofer. 2 Eight screws and washers need to be removed from the woofer using the phillips head screwdriver. 1 2 3 4 5 6 7 8 3 Keep the eight screws and fl at washers in a safe place. Note: There are t ...

  • Alvarez SA1232z - page 8

    8 Top woofer replacement continued: 6 The picture on the right shows what the SA1232z looks like with the grill and top woofer removed. Place the new woofer (part #0013920) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the SA1232z and the new woofer should now be pumping out glorious lows. Awesome, you just r ...

  • Alvarez SA1232z - page 9

    9 High Frequency Driver replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the high frequency driver. 2 Fourteen screws and washers need to be removed from the horn assembly using the phillips head screwdriver. 3 Keep the fourteen screws and fl at washers in a safe place ...

  • Alvarez SA1232z - page 10

    10 High Frequency Driver replacement continued: 5 The positive (solid blue) and negative (blue and black) cables are still attached to the high frequency driver terminals. Remove the cables from their terminals simply by pushing down on the terminal and pulling out the cable. 4 Carefully begin to remove the entire horn assembly (with the high and m ...

  • Alvarez SA1232z - page 11

    11 High Frequency Driver replacement continued: 7 This is what it looks like with the grill and horn removed. See right side for further instructions and additional pictures on how to remove and replace the high frequency driver. 8 Four screws and locking washers may be removed from the high frequency driver using the phillips head screwdriver. Not ...

  • Alvarez SA1232z - page 12

    12 9 Keep the four screws and locking washers in a safe place. High Frequency Driver replacement continued: 11 Turning the high frequency driver over reveals the cover plate which needs to be removed using the phillips head screwdriver. Keep the four screws in a safe place. Replace with the new driver (part #0013925) and follow the same steps as ab ...

  • Alvarez SA1232z - page 13

    13 3 A closeup of the high frequency driver is shown above. Four screws need to be removed from the driver using the 3mm allen wrench. 4 Keep the four screws in a safe place. 5 The diaphragm and plate adapter are easily removed from the horn assembly. They may not be broken down any further. Place the new diaphragm (part # coming soon) and plate as ...

  • Alvarez SA1232z - page 14

    14 Mid Frequency Driver replacement: 1 Follow steps 1-6 of the high frequency driver replacement instructions, as the grill and horn assembly will need to be removed in order to access the mid frequency driver. 2 Eight screws and locking washers may be removed from the mid frequency driver cover plate using the phillips head screwdriver. 3 Keep the ...

  • Alvarez SA1232z - page 15

    15 Mid Frequency Driver replacement continued: 5 Four screws and locking washers may be removed from the mid frequency driver using the phillips head screwdriver. Contrary to what the picture shows, the screws are actually about 2 3/4 ” down from the top of the horn assembly. Also note that the screws may be tighter than usual. Please DO NOT add ...

  • Alvarez SA1232z - page 16

    16 Ampli fi er Assembly replacement: 1 Eighteen screws need to be removed from the ampli fi er assembly using the phillips head screwdriver. The ampli fi er assembly is capped by two cover plates outlined above. 3 The covers may be worked loose by wedging a fl at head screwdriver in between the cabinet and the cover, as well as the ampli fi er ...

  • Alvarez SA1232z - page 17

    17 Ampli fi er assembly replacement continued: 4 Once the two cover plates are removed, two more screws need to be taken out in order to separate the ampli fi er assembly from the cabinet. Keep the two screws in a safe place. 5 The ampli fi er assembly is now ready to be separated from the cabinet. Do not completely take the ampli fi er assembl ...

  • Alvarez SA1232z - page 18

    18 Ampli fi er assembly replacement continued: 6 Closeups of the led PCB cable and connector are shown above. The black wire of the cable is closest to the ribbon cable. The cable only fi ts in one way. 7 Now for the closeups of the woofer and driver terminals. Make sure the cables are reconnected to the same terminals they were removed from (but ...

  • Alvarez SA1232z - page 19

    19 7 Place the new ampli fi er assembly (part #0013840-00) where the old one was. Follow the same steps as above, but backwards 6 to 1. Remove the serial number from the faulty ampli fi er assembly (as shown in picture above) and place on the new ampli fi er assembly. Power up the SA1232z and relish in the fact that you just replaced an ampli ? ...

Fabbricante Alvarez Categoria Car Speaker

I documenti che otteniamo dal fabbricante del dispositivoAlvarez SA1232z possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Alvarez
- manuali per l’uso SA1232z
- schede prodotto Alvarez
- opuscoli
- o etichette energetiche Alvarez SA1232z
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Alvarez SA1232z.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Alvarez SA1232z, manuali di manutenzione, brevi manuali o manuali utente Alvarez SA1232z. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Alvarez SA1232z.

Manuali per l’uso simili

Manuale completo del dispositivo Alvarez SA1232z, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Alvarez SA1232z dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Alvarez SA1232z.

Il manuale per l’uso completo Alvarez, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Alvarez SA1232z - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Alvarez SA1232z, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Alvarez SA1232z che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Alvarez SA1232z - che ci dovrebbe aiutare nei primi passi durante l'uso Alvarez SA1232z
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Alvarez SA1232z
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Alvarez SA1232z in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Alvarez SA1232z?

Utilizza il modulo sottostante

Se non hai risolto il problema con Alvarez SA1232z con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Alvarez SA1232z è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)