Русский dropdown-ico

Инструкция обслуживания Alvarez SA1232z

19 страниц 1.25 mb
Скачать

Перейти на страницу of 19

Summary
  • Alvarez SA1232z - page 1

    1 SA1232z REPAIR MANUAL ...

  • Alvarez SA1232z - page 2

    2 These instructions are intended to help restore any ailing SA1232z Active Loudspeaker back to factory working conditions. They show how to remove and replace the drivers and the ampli fi er assembly. Please contact Mackie Tech Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration. The ...

  • Alvarez SA1232z - page 3

    3 Led PCB replacement: 3 Carefully begin to remove the grill. Do not fully remove the grill as the cable is still fi rmly attached to the led PCB assembly. A fl at head screwdriver may aid in loosening the grill from the cabinet. 2 Keep the ten screws in a safe place. 4 Carefully remove the cable attached to the led PCB assembly. 1 Five screws ne ...

  • Alvarez SA1232z - page 4

    4 6 Carefully remove the led PCB assembly from the back side of the grill. Led PCB replacement continued: 7 The hard part is done, the rest is easy! Place the new led PCB assembly (part #0007334) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the SA1232z and the led should light up. Congratulations, you just r ...

  • Alvarez SA1232z - page 5

    5 Bottom woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the bottom woofer. 2 Eight screws and washers need to be removed from the woofer using the phillips head screwdriver. 3 Keep the eight screws and fl at washers in a safe place. Note: There are two differe ...

  • Alvarez SA1232z - page 6

    6 Bottom woofer replacement continued: 6 The picture on the right shows what the SA1232z looks like with the grill and bottom woofer removed . Place the new woofer (part #0013920) where the old one was. Follow the same steps as above, but backwards 5 to 1, making sure to keep the led PCB assembly cable in front of the woofer. Power up the SA1232z a ...

  • Alvarez SA1232z - page 7

    7 Top woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the top woofer. 2 Eight screws and washers need to be removed from the woofer using the phillips head screwdriver. 1 2 3 4 5 6 7 8 3 Keep the eight screws and fl at washers in a safe place. Note: There are t ...

  • Alvarez SA1232z - page 8

    8 Top woofer replacement continued: 6 The picture on the right shows what the SA1232z looks like with the grill and top woofer removed. Place the new woofer (part #0013920) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the SA1232z and the new woofer should now be pumping out glorious lows. Awesome, you just r ...

  • Alvarez SA1232z - page 9

    9 High Frequency Driver replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the high frequency driver. 2 Fourteen screws and washers need to be removed from the horn assembly using the phillips head screwdriver. 3 Keep the fourteen screws and fl at washers in a safe place ...

  • Alvarez SA1232z - page 10

    10 High Frequency Driver replacement continued: 5 The positive (solid blue) and negative (blue and black) cables are still attached to the high frequency driver terminals. Remove the cables from their terminals simply by pushing down on the terminal and pulling out the cable. 4 Carefully begin to remove the entire horn assembly (with the high and m ...

  • Alvarez SA1232z - page 11

    11 High Frequency Driver replacement continued: 7 This is what it looks like with the grill and horn removed. See right side for further instructions and additional pictures on how to remove and replace the high frequency driver. 8 Four screws and locking washers may be removed from the high frequency driver using the phillips head screwdriver. Not ...

  • Alvarez SA1232z - page 12

    12 9 Keep the four screws and locking washers in a safe place. High Frequency Driver replacement continued: 11 Turning the high frequency driver over reveals the cover plate which needs to be removed using the phillips head screwdriver. Keep the four screws in a safe place. Replace with the new driver (part #0013925) and follow the same steps as ab ...

  • Alvarez SA1232z - page 13

    13 3 A closeup of the high frequency driver is shown above. Four screws need to be removed from the driver using the 3mm allen wrench. 4 Keep the four screws in a safe place. 5 The diaphragm and plate adapter are easily removed from the horn assembly. They may not be broken down any further. Place the new diaphragm (part # coming soon) and plate as ...

  • Alvarez SA1232z - page 14

    14 Mid Frequency Driver replacement: 1 Follow steps 1-6 of the high frequency driver replacement instructions, as the grill and horn assembly will need to be removed in order to access the mid frequency driver. 2 Eight screws and locking washers may be removed from the mid frequency driver cover plate using the phillips head screwdriver. 3 Keep the ...

  • Alvarez SA1232z - page 15

    15 Mid Frequency Driver replacement continued: 5 Four screws and locking washers may be removed from the mid frequency driver using the phillips head screwdriver. Contrary to what the picture shows, the screws are actually about 2 3/4 ” down from the top of the horn assembly. Also note that the screws may be tighter than usual. Please DO NOT add ...

  • Alvarez SA1232z - page 16

    16 Ampli fi er Assembly replacement: 1 Eighteen screws need to be removed from the ampli fi er assembly using the phillips head screwdriver. The ampli fi er assembly is capped by two cover plates outlined above. 3 The covers may be worked loose by wedging a fl at head screwdriver in between the cabinet and the cover, as well as the ampli fi er ...

  • Alvarez SA1232z - page 17

    17 Ampli fi er assembly replacement continued: 4 Once the two cover plates are removed, two more screws need to be taken out in order to separate the ampli fi er assembly from the cabinet. Keep the two screws in a safe place. 5 The ampli fi er assembly is now ready to be separated from the cabinet. Do not completely take the ampli fi er assembl ...

  • Alvarez SA1232z - page 18

    18 Ampli fi er assembly replacement continued: 6 Closeups of the led PCB cable and connector are shown above. The black wire of the cable is closest to the ribbon cable. The cable only fi ts in one way. 7 Now for the closeups of the woofer and driver terminals. Make sure the cables are reconnected to the same terminals they were removed from (but ...

  • Alvarez SA1232z - page 19

    19 7 Place the new ampli fi er assembly (part #0013840-00) where the old one was. Follow the same steps as above, but backwards 6 to 1. Remove the serial number from the faulty ampli fi er assembly (as shown in picture above) and place on the new ampli fi er assembly. Power up the SA1232z and relish in the fact that you just replaced an ampli ? ...

Производитель Alvarez Категория Car Speaker

Документы, которые мы получаем от производителя устройства Alvarez SA1232z мы можем разделить на несколько групп. Это в частности:
- технические чертежи Alvarez
- инструкции обслуживания SA1232z
- паспорта изделия Alvarez
- информационные брошюры
- энергетические этикетки Alvarez SA1232z
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Alvarez SA1232z.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Alvarez SA1232z, инструкции обслуживания, короткие инструкции или инструкции пользователя Alvarez SA1232z. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Alvarez SA1232z.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Alvarez SA1232z, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Alvarez SA1232z пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Alvarez SA1232z.

Полная инструкция обслуживания Alvarez, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Alvarez SA1232z - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Alvarez SA1232z, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Alvarez SA1232z, которое найдем в данном документе
3. Советы по использованию основных функций устройства Alvarez SA1232z - которые должны облегчить нам первые шаги во время использования Alvarez SA1232z
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Alvarez SA1232z
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Alvarez SA1232z в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Alvarez SA1232z?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Alvarez SA1232z, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Alvarez SA1232z со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)