Italiano dropdown-ico

Manuale per l’uso HP (Hewlett-Packard) 3C590-TPO

40 pagine 0.1 mb
Scarica

Vai alla pagina of 40

Summary
  • HP (Hewlett-Packard) 3C590-TPO - page 1

    Etherlink III PCI Network Interface Card (10BT) 3C590-TPO Installation Guide ...

  • HP (Hewlett-Packard) 3C590-TPO - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incid ...

  • HP (Hewlett-Packard) 3C590-TPO - page 3

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. DOS ODI - File Name: 3C5X9.COM Size: 42KB Date: 7/21/96 • DOS and MS-Windows ...

  • HP (Hewlett-Packard) 3C590-TPO - page 4

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 6 Remove the 3com cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. 7 Execute INSTALL.EXE and set lines 1-5 as listed below; 8 C:NWCLIENT 9 YES 10 YES C:WINDOWS 11 NO 12 3COM Etherlink III Parallel Tasking Family. 13 Highlight option 6 to continue with insta ...

  • HP (Hewlett-Packard) 3C590-TPO - page 5

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. File Name: Elnk3.VXD Size: 30KB Date: 7/18/96 • Windows 95 SR2 media. • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink N ...

  • HP (Hewlett-Packard) 3C590-TPO - page 6

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert the 3C509B drivers diskette and set path to “A:” and hit enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C509BWIN95”) 11 High light the adapter labeled “3Com ...

  • HP (Hewlett-Packard) 3C590-TPO - page 7

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. DOS ODI - File Name: 3C5X9.COM Size: 42KB Date: 7/21/96 • DOS and MS-Windows ...

  • HP (Hewlett-Packard) 3C590-TPO - page 8

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 6 Remove the 3com cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. 7 Execute INSTALL.EXE and set lines 1-5 as listed below; 8 C:NWCLIENT 9 YES 10 YES C:WINDOWS 11 NO 12 3COM Etherlink III Parallel Tasking Family. 13 Highlight option 6 to continue with insta ...

  • HP (Hewlett-Packard) 3C590-TPO - page 9

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. File Name: Elnk3.VXD Size: 30KB Date: 7/18/96 • Windows 95 SR2 media. • Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink N ...

  • HP (Hewlett-Packard) 3C590-TPO - page 10

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert the 3C509B drivers diskette and set path to “A:” and hit enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C509BWIN95”) 11 High light the adapter labeled “3Com ...

  • HP (Hewlett-Packard) 3C590-TPO - page 11

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 12

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 7 After windows loads, open the “NETWORK” Program Group, and double- click on “Network Setup.” 8 Select the “Networks” button in the “Network Setup” dialog box. 9 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 10 Click on the ...

  • HP (Hewlett-Packard) 3C590-TPO - page 13

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 14

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 15

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.Vxd Size: 30.2KB Date: 7/18/96 • DOS and MS-Windows for Workgroups 3.11 media. • Microsoft Windows NT Server 3.51 machine that supports Net B ...

  • HP (Hewlett-Packard) 3C590-TPO - page 16

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box. 13 Insert the 3COM Software “Etherlink ...

  • HP (Hewlett-Packard) 3C590-TPO - page 17

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 7 K B D a t e : 7 / 1 8 / 9 6 • Mi ...

  • HP (Hewlett-Packard) 3C590-TPO - page 18

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer. 10 Insert the Windows NT Workstaion CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.” (If you have an HP preloaded HDD, set pa ...

  • HP (Hewlett-Packard) 3C590-TPO - page 19

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 24 To complete the installation, remove the floppy disk , and click on “Restart Computer” button in the “Windows NT Workstation Networking Setup” dialog box. ...

  • HP (Hewlett-Packard) 3C590-TPO - page 20

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 21

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT Workstation 4.0 and service pack media. ...

  • HP (Hewlett-Packard) 3C590-TPO - page 22

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator) 10 Open the “Network Properties” window and agree to install “Win ...

  • HP (Hewlett-Packard) 3C590-TPO - page 23

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Ye ...

  • HP (Hewlett-Packard) 3C590-TPO - page 24

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 25

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 26

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 7 After windows loads, open the “NETWORK” Program Group, and double- click on “Network Setup.” 8 Select the “Networks” button in the “Network Setup” dialog box. 9 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 10 Click on the ...

  • HP (Hewlett-Packard) 3C590-TPO - page 27

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 28

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 29

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.Vxd Size: 30.2KB Date: 7/18/96 • DOS and MS-Windows for Workgroups 3.11 media. • Microsoft Windows NT Server 4.0 machine that supports Net BEU ...

  • HP (Hewlett-Packard) 3C590-TPO - page 30

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box. 13 Insert the 3COM Software “Etherlink 3 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 31

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.Driver N a m e : E l n k 3 . S Y S S i z e : 2 7 K B D a t e : 7 / 1 8 / 9 6 • Microsoft ...

  • HP (Hewlett-Packard) 3C590-TPO - page 32

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer. 10 Insert the Windows NT Workstaion CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.” (If you have an HP preloaded HDD, set pat ...

  • HP (Hewlett-Packard) 3C590-TPO - page 33

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 24 To complete the installation, remove the floppy disk , and click on “Restart Computer” button in the “Windows NT Workstation Networking Setup” dialog box. ...

  • HP (Hewlett-Packard) 3C590-TPO - page 34

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 35

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT Workstation 4.0 and service pack media. ( ...

  • HP (Hewlett-Packard) 3C590-TPO - page 36

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator) 10 Open the “Network Properties” window and agree to install “Wind ...

  • HP (Hewlett-Packard) 3C590-TPO - page 37

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes ...

  • HP (Hewlett-Packard) 3C590-TPO - page 38

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 39

    ...

  • HP (Hewlett-Packard) 3C590-TPO - page 40

    V ersion Number Lans PCI Rev .1 ...

Fabbricante HP (Hewlett-Packard) Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoHP (Hewlett-Packard) 3C590-TPO possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici HP (Hewlett-Packard)
- manuali per l’uso 3C590-TPO
- schede prodotto HP (Hewlett-Packard)
- opuscoli
- o etichette energetiche HP (Hewlett-Packard) 3C590-TPO
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso HP (Hewlett-Packard) 3C590-TPO.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione HP (Hewlett-Packard) 3C590-TPO, manuali di manutenzione, brevi manuali o manuali utente HP (Hewlett-Packard) 3C590-TPO. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto HP (Hewlett-Packard) 3C590-TPO.

Manuali per l’uso simili

Manuale completo del dispositivo HP (Hewlett-Packard) 3C590-TPO, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare HP (Hewlett-Packard) 3C590-TPO dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti HP (Hewlett-Packard) 3C590-TPO.

Il manuale per l’uso completo HP (Hewlett-Packard), dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale HP (Hewlett-Packard) 3C590-TPO - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice HP (Hewlett-Packard) 3C590-TPO, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per HP (Hewlett-Packard) 3C590-TPO che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo HP (Hewlett-Packard) 3C590-TPO - che ci dovrebbe aiutare nei primi passi durante l'uso HP (Hewlett-Packard) 3C590-TPO
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del HP (Hewlett-Packard) 3C590-TPO
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio HP (Hewlett-Packard) 3C590-TPO in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su HP (Hewlett-Packard) 3C590-TPO?

Utilizza il modulo sottostante

Se non hai risolto il problema con HP (Hewlett-Packard) 3C590-TPO con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con HP (Hewlett-Packard) 3C590-TPO è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)