English dropdown-ico

Manual HP (Hewlett-Packard) 3C590-TPO

40 pages 0.1 mb
Download

Go to site of 40

Summary
  • HP (Hewlett-Packard) 3C590-TPO - page 1

    Etherlink III PCI Network Interface Card (10BT) 3C590-TPO Installation Guide ...

  • HP (Hewlett-Packard) 3C590-TPO - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incid ...

  • HP (Hewlett-Packard) 3C590-TPO - page 3

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. DOS ODI - File Name: 3C5X9.COM Size: 42KB Date: 7/21/96 • DOS and MS-Windows ...

  • HP (Hewlett-Packard) 3C590-TPO - page 4

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 6 Remove the 3com cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. 7 Execute INSTALL.EXE and set lines 1-5 as listed below; 8 C:NWCLIENT 9 YES 10 YES C:WINDOWS 11 NO 12 3COM Etherlink III Parallel Tasking Family. 13 Highlight option 6 to continue with insta ...

  • HP (Hewlett-Packard) 3C590-TPO - page 5

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. File Name: Elnk3.VXD Size: 30KB Date: 7/18/96 • Windows 95 SR2 media. • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink N ...

  • HP (Hewlett-Packard) 3C590-TPO - page 6

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert the 3C509B drivers diskette and set path to “A:” and hit enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C509BWIN95”) 11 High light the adapter labeled “3Com ...

  • HP (Hewlett-Packard) 3C590-TPO - page 7

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. DOS ODI - File Name: 3C5X9.COM Size: 42KB Date: 7/21/96 • DOS and MS-Windows ...

  • HP (Hewlett-Packard) 3C590-TPO - page 8

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 6 Remove the 3com cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. 7 Execute INSTALL.EXE and set lines 1-5 as listed below; 8 C:NWCLIENT 9 YES 10 YES C:WINDOWS 11 NO 12 3COM Etherlink III Parallel Tasking Family. 13 Highlight option 6 to continue with insta ...

  • HP (Hewlett-Packard) 3C590-TPO - page 9

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. File Name: Elnk3.VXD Size: 30KB Date: 7/18/96 • Windows 95 SR2 media. • Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink N ...

  • HP (Hewlett-Packard) 3C590-TPO - page 10

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert the 3C509B drivers diskette and set path to “A:” and hit enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C509BWIN95”) 11 High light the adapter labeled “3Com ...

  • HP (Hewlett-Packard) 3C590-TPO - page 11

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 12

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 7 After windows loads, open the “NETWORK” Program Group, and double- click on “Network Setup.” 8 Select the “Networks” button in the “Network Setup” dialog box. 9 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 10 Click on the ...

  • HP (Hewlett-Packard) 3C590-TPO - page 13

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 14

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 15

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.Vxd Size: 30.2KB Date: 7/18/96 • DOS and MS-Windows for Workgroups 3.11 media. • Microsoft Windows NT Server 3.51 machine that supports Net B ...

  • HP (Hewlett-Packard) 3C590-TPO - page 16

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box. 13 Insert the 3COM Software “Etherlink ...

  • HP (Hewlett-Packard) 3C590-TPO - page 17

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 7 K B D a t e : 7 / 1 8 / 9 6 • Mi ...

  • HP (Hewlett-Packard) 3C590-TPO - page 18

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer. 10 Insert the Windows NT Workstaion CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.” (If you have an HP preloaded HDD, set pa ...

  • HP (Hewlett-Packard) 3C590-TPO - page 19

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 24 To complete the installation, remove the floppy disk , and click on “Restart Computer” button in the “Windows NT Workstation Networking Setup” dialog box. ...

  • HP (Hewlett-Packard) 3C590-TPO - page 20

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 21

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT Workstation 4.0 and service pack media. ...

  • HP (Hewlett-Packard) 3C590-TPO - page 22

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator) 10 Open the “Network Properties” window and agree to install “Win ...

  • HP (Hewlett-Packard) 3C590-TPO - page 23

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Ye ...

  • HP (Hewlett-Packard) 3C590-TPO - page 24

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 25

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 26

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 7 After windows loads, open the “NETWORK” Program Group, and double- click on “Network Setup.” 8 Select the “Networks” button in the “Network Setup” dialog box. 9 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 10 Click on the ...

  • HP (Hewlett-Packard) 3C590-TPO - page 27

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 28

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 29

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.Vxd Size: 30.2KB Date: 7/18/96 • DOS and MS-Windows for Workgroups 3.11 media. • Microsoft Windows NT Server 4.0 machine that supports Net BEU ...

  • HP (Hewlett-Packard) 3C590-TPO - page 30

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box. 13 Insert the 3COM Software “Etherlink 3 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 31

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.Driver N a m e : E l n k 3 . S Y S S i z e : 2 7 K B D a t e : 7 / 1 8 / 9 6 • Microsoft ...

  • HP (Hewlett-Packard) 3C590-TPO - page 32

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer. 10 Insert the Windows NT Workstaion CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.” (If you have an HP preloaded HDD, set pat ...

  • HP (Hewlett-Packard) 3C590-TPO - page 33

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 24 To complete the installation, remove the floppy disk , and click on “Restart Computer” button in the “Windows NT Workstation Networking Setup” dialog box. ...

  • HP (Hewlett-Packard) 3C590-TPO - page 34

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 35

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT Workstation 4.0 and service pack media. ( ...

  • HP (Hewlett-Packard) 3C590-TPO - page 36

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator) 10 Open the “Network Properties” window and agree to install “Wind ...

  • HP (Hewlett-Packard) 3C590-TPO - page 37

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes ...

  • HP (Hewlett-Packard) 3C590-TPO - page 38

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 ...

  • HP (Hewlett-Packard) 3C590-TPO - page 39

    ...

  • HP (Hewlett-Packard) 3C590-TPO - page 40

    V ersion Number Lans PCI Rev .1 ...

Manufacturer HP (Hewlett-Packard) Category Network Card

Documents that we receive from a manufacturer of a HP (Hewlett-Packard) 3C590-TPO can be divided into several groups. They are, among others:
- HP (Hewlett-Packard) technical drawings
- 3C590-TPO manuals
- HP (Hewlett-Packard) product data sheets
- information booklets
- or energy labels HP (Hewlett-Packard) 3C590-TPO
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP (Hewlett-Packard) 3C590-TPO.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP (Hewlett-Packard) 3C590-TPO, service manual, brief instructions and user manuals HP (Hewlett-Packard) 3C590-TPO. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP (Hewlett-Packard) 3C590-TPO.

Similar manuals

A complete manual for the device HP (Hewlett-Packard) 3C590-TPO, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP (Hewlett-Packard) 3C590-TPO by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP (Hewlett-Packard) 3C590-TPO.

A complete HP (Hewlett-Packard) manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP (Hewlett-Packard) 3C590-TPO - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP (Hewlett-Packard) 3C590-TPO, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP (Hewlett-Packard) 3C590-TPO, that we can find in the current document
3. Tips how to use the basic functions of the device HP (Hewlett-Packard) 3C590-TPO - which should help us in our first steps of using HP (Hewlett-Packard) 3C590-TPO
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP (Hewlett-Packard) 3C590-TPO
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP (Hewlett-Packard) 3C590-TPO in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP (Hewlett-Packard) 3C590-TPO?

Use the form below

If you did not solve your problem by using a manual HP (Hewlett-Packard) 3C590-TPO, ask a question using the form below. If a user had a similar problem with HP (Hewlett-Packard) 3C590-TPO it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)