Manuale per l’uso Supermicro AOC-CTG-i2S

19 pagine Non applicabile
Scarica

Vai alla pagina of 19

Summary
  • Supermicro AOC-CTG-i2S - page 1

    User's Guide Revision 1.0 AOC-CTG-i2S ...

  • Supermicro AOC-CTG-i2S - page 2

    User's Guide Revision 1.0 Release Date: September 21, 2012 Unless you request and receive written permission from Super Micro Computer , Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of t ...

  • Supermicro AOC-CTG-i2S - page 3

    Preface About this User's Guide This user's guide is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the AOC-CTG-i2S add-on card. About this Add-on Card The AOC-CTG-i2S 10 Gigabit Ethernet Adapter is a exible and scalable Ether - net adapter designed for ...

  • Supermicro AOC-CTG-i2S - page 4

    iv AOC-CTG-i2S Add-on Card User's Guide Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and to prevent damage to the system or injury to yourself: W arning: Important information given to ensure proper system installation or to prevent damage to the components or injury to ...

  • Supermicro AOC-CTG-i2S - page 5

    v Preface Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Website: www .supermicro.com Europe Address: Super Micro Computer B.V . Het Sterren ...

  • Supermicro AOC-CTG-i2S - page 6

    T able of Contents Preface Chapter 1 Overview 1-1 Overview ......................................................................................................... 1-1 1-2 Key Features ................................................................................................... 1-1 1-3 Specications ........................................ ...

  • Supermicro AOC-CTG-i2S - page 7

    Chapter 1: Overview 1-1 Chapter 1 Overview 1-1 Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry . Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. For product support and updates, please refer to our website a ...

  • Supermicro AOC-CTG-i2S - page 8

    1-2 AOC-CTG-i2S Add-on Card User's Guide • PCI-E 2.0 x8 (5GT/s) • Load balancing on multiple CPUs • iSCSI remote boot support • Fibre Channel over Ethernet (FCoE) support • Intel ® PROSet Utility for Windows ® Device Manager I/O Features • Intel QuickData T echnology: DMA engine that enhances data acceleration a ...

  • Supermicro AOC-CTG-i2S - page 9

    Chapter 1: Overview 1-3 • Simple Network Management Protocol (SNMP) and Remote Network Monitoring (RMON) statistics counters • iSCSI remote boot OS Support • Windows ® 7, 8, Server 2003, Server 2008, Server 2008 R2, Server 2012, Vista • RedHat EL, SuSe SLES • FreeBSD • VMware Cables Support • SFP+ direct attached ...

  • Supermicro AOC-CTG-i2S - page 10

    1-4 AOC-CTG-i2S Add-on Card User's Guide (2) - 2U Bracket Note1: This add-on card (AOC-CTG-i2S) is not recommended for 12-node MicroCloud systems. Note2: This product is only available to Supermicro OEM customers and is sold as an integrated solution with Supermicro server systems. For the most current product information, visit: www .supermic ...

  • Supermicro AOC-CTG-i2S - page 11

    Chapter 2: Hardware Components 2-1 Intel 82599ES 10GbE Controller Chapter 2 Hardware Components 2-1 Add-On Card Image and Layout The AOC-CTG-i2S Layout 1 2-2 Major Components The following major components are installed on the AOC-CTG-i2S: 1. Intel 82599ES 10GbE Controller 2. Dual SFP+ Ports 3. Dual USB 2.0 Ports 1 2 3 2 3 The AOC-CTG-i2S Image ...

  • Supermicro AOC-CTG-i2S - page 12

    2-2 AOC-CTG-i2S Add-on Card User's Guide 2-3 Connectors and LEDs SFP+ Ports T wo SFP+ 10GbE adapter ports are located on the add-on card. Connect a DAC T win Axial cable or an LC Fiber- Optic SR cable to the ports to provide Gigabit Ethernet communication. Refer to the add-on card layout on Page 2-1 for the location of the SFP+ port. Note: For ...

  • Supermicro AOC-CTG-i2S - page 13

    3-1 Chapter 3: Installation Chapter 3 Installation 3-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o avoid dam - aging your add-on card, it is important to handle it very carefully . The following measures are generally sufcient to protect your equipment from ESD. Precautions • Use a grounded ...

  • Supermicro AOC-CTG-i2S - page 14

    3-2 AOC-CTG-i2S Add-on Card User's Guide Removing/Installing the IO Bracket Refer to the illustration at right for the following instructions on removing/installing the I/O bracket. T o remove the I/O bracket : Loosen and remove the I/O bracket screw , then gently pull the bracket away from the add-on card. T o install the I/O bracket : Positi ...

  • Supermicro AOC-CTG-i2S - page 15

    3-3 Chapter 3: Installation 3-3 Before Installation T o install the add-on card properly , be sure to follow the instructions below . 1. Power down the system. 2. Remove the power cord from the wall socket. 3. Use industry standard anti-static equipment (such as gloves or wrist strap) and follow the instructions listed on Page 3-1 to avoid damage c ...

  • Supermicro AOC-CTG-i2S - page 16

    3-4 AOC-CTG-i2S Add-on Card User's Guide Note : If the FOUND NEW HARDWARE WIZARD screen displays on your system, click CANCEL. 3. Click on INST ALL DRIVERS AND SOFTW ARE. 4. Follow the prompts to complete the installation. 3-6 Installing the Linux Operating System Follow the steps below to install the driver to a Linux system. Build a Binary R ...

  • Supermicro AOC-CTG-i2S - page 17

    3-5 Chapter 3: Installation 3-7 Building the Driver Manually Follow the instructions below to build the driver manually . 1. Move the base driver tar le to the directory of your choice. For example /home/username/ixgbe or /usr/local/src/ixgbe 2. Untar/unzip archive, where <x.x.x> is the version number for the driver tar le: tar zxf ixgb ...

  • Supermicro AOC-CTG-i2S - page 18

    3-6 AOC-CTG-i2S Add-on Card User's Guide For 2.6 kernels, the insmod command can be used if the full path to the driver module is specied. For example: insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ ixgbe/ixgbe.ko In addition, when using 2.6-based kernels, make sure that older ixgbe drivers are removed from the kernel before ...

  • Supermicro AOC-CTG-i2S - page 19

    (Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signicant injury or ...

Fabbricante Supermicro Categoria Network card

I documenti che otteniamo dal fabbricante del dispositivoSupermicro AOC-CTG-i2S possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Supermicro
- manuali per l’uso AOC-CTG-i2S
- schede prodotto Supermicro
- opuscoli
- o etichette energetiche Supermicro AOC-CTG-i2S
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Supermicro AOC-CTG-i2S.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Supermicro AOC-CTG-i2S, manuali di manutenzione, brevi manuali o manuali utente Supermicro AOC-CTG-i2S. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Supermicro AOC-CTG-i2S.

Manuali per l’uso simili

Manuale completo del dispositivo Supermicro AOC-CTG-i2S, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Supermicro AOC-CTG-i2S dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Supermicro AOC-CTG-i2S.

Il manuale per l’uso completo Supermicro, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Supermicro AOC-CTG-i2S - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Supermicro AOC-CTG-i2S, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Supermicro AOC-CTG-i2S che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Supermicro AOC-CTG-i2S - che ci dovrebbe aiutare nei primi passi durante l'uso Supermicro AOC-CTG-i2S
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Supermicro AOC-CTG-i2S
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Supermicro AOC-CTG-i2S in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Supermicro AOC-CTG-i2S?

Utilizza il modulo sottostante

Se non hai risolto il problema con Supermicro AOC-CTG-i2S con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Supermicro AOC-CTG-i2S è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)