English dropdown-ico

Manual Supermicro AOC-CTG-i2S

19 pages Not applicable
Download

Go to site of 19

Summary
  • Supermicro AOC-CTG-i2S - page 1

    User's Guide Revision 1.0 AOC-CTG-i2S ...

  • Supermicro AOC-CTG-i2S - page 2

    User's Guide Revision 1.0 Release Date: September 21, 2012 Unless you request and receive written permission from Super Micro Computer , Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of t ...

  • Supermicro AOC-CTG-i2S - page 3

    Preface About this User's Guide This user's guide is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the AOC-CTG-i2S add-on card. About this Add-on Card The AOC-CTG-i2S 10 Gigabit Ethernet Adapter is a exible and scalable Ether - net adapter designed for ...

  • Supermicro AOC-CTG-i2S - page 4

    iv AOC-CTG-i2S Add-on Card User's Guide Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and to prevent damage to the system or injury to yourself: W arning: Important information given to ensure proper system installation or to prevent damage to the components or injury to ...

  • Supermicro AOC-CTG-i2S - page 5

    v Preface Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Website: www .supermicro.com Europe Address: Super Micro Computer B.V . Het Sterren ...

  • Supermicro AOC-CTG-i2S - page 6

    T able of Contents Preface Chapter 1 Overview 1-1 Overview ......................................................................................................... 1-1 1-2 Key Features ................................................................................................... 1-1 1-3 Specications ........................................ ...

  • Supermicro AOC-CTG-i2S - page 7

    Chapter 1: Overview 1-1 Chapter 1 Overview 1-1 Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry . Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. For product support and updates, please refer to our website a ...

  • Supermicro AOC-CTG-i2S - page 8

    1-2 AOC-CTG-i2S Add-on Card User's Guide • PCI-E 2.0 x8 (5GT/s) • Load balancing on multiple CPUs • iSCSI remote boot support • Fibre Channel over Ethernet (FCoE) support • Intel ® PROSet Utility for Windows ® Device Manager I/O Features • Intel QuickData T echnology: DMA engine that enhances data acceleration a ...

  • Supermicro AOC-CTG-i2S - page 9

    Chapter 1: Overview 1-3 • Simple Network Management Protocol (SNMP) and Remote Network Monitoring (RMON) statistics counters • iSCSI remote boot OS Support • Windows ® 7, 8, Server 2003, Server 2008, Server 2008 R2, Server 2012, Vista • RedHat EL, SuSe SLES • FreeBSD • VMware Cables Support • SFP+ direct attached ...

  • Supermicro AOC-CTG-i2S - page 10

    1-4 AOC-CTG-i2S Add-on Card User's Guide (2) - 2U Bracket Note1: This add-on card (AOC-CTG-i2S) is not recommended for 12-node MicroCloud systems. Note2: This product is only available to Supermicro OEM customers and is sold as an integrated solution with Supermicro server systems. For the most current product information, visit: www .supermic ...

  • Supermicro AOC-CTG-i2S - page 11

    Chapter 2: Hardware Components 2-1 Intel 82599ES 10GbE Controller Chapter 2 Hardware Components 2-1 Add-On Card Image and Layout The AOC-CTG-i2S Layout 1 2-2 Major Components The following major components are installed on the AOC-CTG-i2S: 1. Intel 82599ES 10GbE Controller 2. Dual SFP+ Ports 3. Dual USB 2.0 Ports 1 2 3 2 3 The AOC-CTG-i2S Image ...

  • Supermicro AOC-CTG-i2S - page 12

    2-2 AOC-CTG-i2S Add-on Card User's Guide 2-3 Connectors and LEDs SFP+ Ports T wo SFP+ 10GbE adapter ports are located on the add-on card. Connect a DAC T win Axial cable or an LC Fiber- Optic SR cable to the ports to provide Gigabit Ethernet communication. Refer to the add-on card layout on Page 2-1 for the location of the SFP+ port. Note: For ...

  • Supermicro AOC-CTG-i2S - page 13

    3-1 Chapter 3: Installation Chapter 3 Installation 3-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o avoid dam - aging your add-on card, it is important to handle it very carefully . The following measures are generally sufcient to protect your equipment from ESD. Precautions • Use a grounded ...

  • Supermicro AOC-CTG-i2S - page 14

    3-2 AOC-CTG-i2S Add-on Card User's Guide Removing/Installing the IO Bracket Refer to the illustration at right for the following instructions on removing/installing the I/O bracket. T o remove the I/O bracket : Loosen and remove the I/O bracket screw , then gently pull the bracket away from the add-on card. T o install the I/O bracket : Positi ...

  • Supermicro AOC-CTG-i2S - page 15

    3-3 Chapter 3: Installation 3-3 Before Installation T o install the add-on card properly , be sure to follow the instructions below . 1. Power down the system. 2. Remove the power cord from the wall socket. 3. Use industry standard anti-static equipment (such as gloves or wrist strap) and follow the instructions listed on Page 3-1 to avoid damage c ...

  • Supermicro AOC-CTG-i2S - page 16

    3-4 AOC-CTG-i2S Add-on Card User's Guide Note : If the FOUND NEW HARDWARE WIZARD screen displays on your system, click CANCEL. 3. Click on INST ALL DRIVERS AND SOFTW ARE. 4. Follow the prompts to complete the installation. 3-6 Installing the Linux Operating System Follow the steps below to install the driver to a Linux system. Build a Binary R ...

  • Supermicro AOC-CTG-i2S - page 17

    3-5 Chapter 3: Installation 3-7 Building the Driver Manually Follow the instructions below to build the driver manually . 1. Move the base driver tar le to the directory of your choice. For example /home/username/ixgbe or /usr/local/src/ixgbe 2. Untar/unzip archive, where <x.x.x> is the version number for the driver tar le: tar zxf ixgb ...

  • Supermicro AOC-CTG-i2S - page 18

    3-6 AOC-CTG-i2S Add-on Card User's Guide For 2.6 kernels, the insmod command can be used if the full path to the driver module is specied. For example: insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ ixgbe/ixgbe.ko In addition, when using 2.6-based kernels, make sure that older ixgbe drivers are removed from the kernel before ...

  • Supermicro AOC-CTG-i2S - page 19

    (Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signicant injury or ...

Manufacturer Supermicro Category Network card

Documents that we receive from a manufacturer of a Supermicro AOC-CTG-i2S can be divided into several groups. They are, among others:
- Supermicro technical drawings
- AOC-CTG-i2S manuals
- Supermicro product data sheets
- information booklets
- or energy labels Supermicro AOC-CTG-i2S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Supermicro AOC-CTG-i2S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Supermicro AOC-CTG-i2S, service manual, brief instructions and user manuals Supermicro AOC-CTG-i2S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Supermicro AOC-CTG-i2S.

Similar manuals

A complete manual for the device Supermicro AOC-CTG-i2S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Supermicro AOC-CTG-i2S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Supermicro AOC-CTG-i2S.

A complete Supermicro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Supermicro AOC-CTG-i2S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Supermicro AOC-CTG-i2S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Supermicro AOC-CTG-i2S, that we can find in the current document
3. Tips how to use the basic functions of the device Supermicro AOC-CTG-i2S - which should help us in our first steps of using Supermicro AOC-CTG-i2S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Supermicro AOC-CTG-i2S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Supermicro AOC-CTG-i2S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Supermicro AOC-CTG-i2S?

Use the form below

If you did not solve your problem by using a manual Supermicro AOC-CTG-i2S, ask a question using the form below. If a user had a similar problem with Supermicro AOC-CTG-i2S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)