Italiano dropdown-ico

Manuale per l’uso Brocade Communications Systems 6650

330 pagine 2.85 mb
Scarica

Vai alla pagina of 330

Summary
  • Brocade Communications Systems 6650 - page 1

    53-1 002600-0 1 28 Sept ember 20 12 ® Brocade ICX 6650 Admi nist rati on G uid e Suppor ting F astIron So ftware Release 0 7 .5.00 ...

  • Brocade Communications Systems 6650 - page 2

    Copyright © 2006-20 12 Brocade Communications Systems, Inc. All Rights R e served. Brocade, Brocade Assurance, the B-wi ng symbol, BigIron, DCX, Fabric OS, FastIron, MLX, NetIron, SAN Health, Ser verIron, T urboIron, V CS, and VDX are registered tradema rks, and AnyIO, Brocade One, CloudPlex, Effort less Networking, ICX, NET Health, OpenScript, an ...

  • Brocade Communications Systems 6650 - page 3

    Brocade ICX 6650 Administration Guide iii 53-1002600-01 Contents About This Document Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Suppor ted har dware and software . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Brocade ICX 6650 slot and port numbering . . . . . . . . . . . . . ...

  • Brocade Communications Systems 6650 - page 4

    iv Brocade ICX 6650 Administration Guide 53-1002600-01 Configuring the de vice as an SNTP ser ver . . . . . . . . . . . . . . . . . . . . 23 Displaying SNTP server inf ormation . . . . . . . . . . . . . . . . . . . . . . 25 Enabling broadcast mode for an SNTP client . . . . . . . . . . . . . . 25 Setting the syst em clock . . . . . . . . . . . . . ...

  • Brocade Communications Systems 6650 - page 5

    Brocade ICX 6650 Administration Guide v 53-1002600-01 Loading and saving configuration f iles wi th IPv6 . . . . . . . . . . . . . . . 62 Using the IPv6 cop y command . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Copying a file fr om an IPv6 TFTP server . . . . . . . . . . . . . . . . . . . 63 IPv6 ncopy command . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 6650 - page 6

    vi Brocade ICX 6650 Administration Guide 53-1002600-01 Chapter 5 IPv6 Configuration on Brocade ICX 6650 Switch F ull Lay er 3 IPv6 feature support . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 01 IPv6 addressing ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 1 IPv6 address types. . . . . . . . . . . . . . ...

  • Brocade Communications Systems 6650 - page 7

    Brocade ICX 6650 Administration Guide vii 53-1002600-01 IPv6 ICMP f eature configuration . . . . . . . . . . . . . . . . . . . . . . . . . . .128 Configuring ICMP rate limiting . . . . . . . . . . . . . . . . . . . . . . . . . 128 Enabling IPv6 ICMP redirect messages . . . . . . . . . . . . . . . . . .129 IPv6 neighbor discov er y configuration . . ...

  • Brocade Communications Systems 6650 - page 8

    viii Brocade ICX 6650 Administration Guide 53-1002600-01 User -based security model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 Configuring your NMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 Configuring SNMP version 3 on Br ocade ICX 6650 devices . . 159 Defining the engine id . . . . . . . . . . . . ...

  • Brocade Communications Systems 6650 - page 9

    Brocade ICX 6650 Administration Guide ix 53-1002600-01 General LLDP operating principles . . . . . . . . . . . . . . . . . . . . . . . . . 186 LLDP operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186 LLDP packe ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 7 TL V suppor t . . . . . ...

  • Brocade Communications Systems 6650 - page 10

    x Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying Syslog messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 Enabling real-time displa y of Syslog messages . . . . . . . . . . . .233 Enabling real-time displa y for a T elnet or SSH session . . . . . .233 Displaying real-time Syslog message s . . . . . . . . . . ...

  • Brocade Communications Systems 6650 - page 11

    Brocade ICX 6650 Administration Guide xi 53-1002600-01 Appendix A Syslog messages Appendix B NIAP-CCEVS Certification NIAP-CCEVS cer tified Bro cade equipment and Iron ware releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299 Local user passwor d changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 ...

  • Brocade Communications Systems 6650 - page 12

    xii Brocade ICX 6650 Administration Guide 53-1002600-01 ...

  • Brocade Communications Systems 6650 - page 13

    Brocade ICX 6650 Administration Guide xiii 53-1002600-01 About This Document The Brocade ICX 6650 is a T oR (T op of Rack) Ethern et switch f or campus LAN and classic Ethernet data center environments. Audience This document is designed f or system administ rators with a working kno wledge of Lay er 2 and Lay er 3 switching and routing. If you are ...

  • Brocade Communications Systems 6650 - page 14

    Brocade ICX 6650 Administration Guide 53-1002600-01 Brocade ICX 6650 slot and port numbering • Slot 2 is located on the bac k of the ICX 6650 de vice an d contains por ts 1 through 3 on the top ro w and por t 4 on the bott om row . These ports are 2x40 GbE QSFP+. R efer t o the follo wing figure. • Slot 3 is located on the back of the ICX 6650 ...

  • Brocade Communications Systems 6650 - page 15

    Brocade ICX 6650 Administration Guide xv 53-1002600-01 Brocade ICX 6650 slot and port numbering Notes, cautions, and warnings The f ollowing notices and statements are used in this manual. They are list ed below in order of increasing sev erity of potential hazar ds. NOTE A note pr ovides a tip, guidance, or advice, em phasizes im por tan t inf orm ...

  • Brocade Communications Systems 6650 - page 16

    Brocade ICX 6650 Administration Guide 53-1002600-01 Brocade ICX 6650 slot and port numbering Related publications The f ollowing Brocade documents supplement the inf ormation in this guide: • Brocade ICX 665 0 Release Not es • Brocade ICX 6650 Har dware Installation Guide Ne w • Brocade ICX 665 0 Administration Guide • Brocade ICX 665 0 Pla ...

  • Brocade Communications Systems 6650 - page 17

    Brocade ICX 6650 Administration Guide xvii 53-1002600-01 Brocade ICX 6650 slot and port numbering Other industry resources For additional resource inf ormation, visit the T echnical Co mmittee T1 1 website. This websit e pro vides interface standards f or high-per forman ce and mass st orage applica tions f or Fibre Channel, storage management , an ...

  • Brocade Communications Systems 6650 - page 18

    Brocade ICX 6650 Administration Guide 53-1002600-01 Brocade ICX 6650 slot and port numbering ...

  • Brocade Communications Systems 6650 - page 19

    Brocade ICX 6650 Administration Guide 1 53-1002600-01 1 Management Applications In this chapter • Management port overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Logging on through the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 • Using slot number , and por ...

  • Brocade Communications Systems 6650 - page 20

    2 Brocade ICX 6650 Administration Guide 53-1002600-01 Management port overview 1 • Creating a management VLAN disables the management port on the device. For switch es, any in-band port may be used f or management purposes. A router sends La yer 3 pack ets using the MAC address of the port as the source MA C address. CLI Commands for use with the ...

  • Brocade Communications Systems 6650 - page 21

    Brocade ICX 6650 Administration Guide 3 53-1002600-01 Logging on through the CLI 1 T o displa y management por t statistics, enter the show statisti cs management command. Brocade(config)#show statistics management 1 Port Link State Dupl Speed Trunk Tag Pri MAC Name mgmt1 Up None Full 1G None No 0 748e.f80c.5f40 Port mgmt1 Counters: InOctets3210941 ...

  • Brocade Communications Systems 6650 - page 22

    4 Brocade ICX 6650 Administration Guide 53-1002600-01 Logging on through the CLI 1 • CONFIG – Lets you mak e configuration changes to the device. T o save the changes across reboots, you need to sa ve them to the system-config file. The CONFIG level contains sub-lev els fo r i n di v i d ua l po r ts , fo r VL A N s, fo r r o ut i n g prot ocol ...

  • Brocade Communications Systems 6650 - page 23

    Brocade ICX 6650 Administration Guide 5 53-1002600-01 Using slot number, and port number with CLI commands 1 • Press the Ret ur n or Enter k ey to displa y the next line (one line at a time). • Press Ctrl+C or Ctrl+Q t o cancel the display . Line editing commands The CLI suppor ts the following line editing comman ds. T o enter a line-editing c ...

  • Brocade Communications Systems 6650 - page 24

    6 Brocade ICX 6650 Administration Guide 53-1002600-01 Using slot number, and port number with CLI commands 1 CLI nomenclature on Brocade ICX 6650 models When you ent er CLI commands that include the port number as part of the syntax, you must use the stack unit/slot number/por t number f ormat. The unit number is 1. For e xample, the following comm ...

  • Brocade Communications Systems 6650 - page 25

    Brocade ICX 6650 Administration Guide 7 53-1002600-01 Using slot number, and port number with CLI commands 1 Syntax: <show-command> | exclu de <regular-expression> Displaying lines starting with a specified string The following command filters the output of the show who command so it displays output star ting with the fi rst line that c ...

  • Brocade Communications Systems 6650 - page 26

    8 Brocade ICX 6650 Administration Guide 53-1002600-01 Using slot number, and port number with CLI commands 1 T o displa y lines containing only a spec ified search string (similar to the include option fo r show commands) press the plus sign ke y ( + ) at the -- More-- pr ompt and then ente r the search string. The filtered results are displayed. T ...

  • Brocade Communications Systems 6650 - page 27

    Brocade ICX 6650 Administration Guide 9 53-1002600-01 Using slot number, and port number with CLI commands 1 + The plus sign matche s on one o r more sequential instances of a pattern. For e xample, the fol lowing regular exp ression matches output that contains "de", f ollowed by a sequence of “g”s, such as “deg”, “degg” , ? ...

  • Brocade Communications Systems 6650 - page 28

    10 Brocade ICX 6650 Administration Guide 53-1002600-01 Using slot number, and port number with CLI commands 1 If you want t o filter for a special charact er instea d of using the spec ial character as describe d in the table abov e, enter “” (backslash) in fr ont of the character . For e xample, to filter on output containing an ast erisk , e ...

  • Brocade Communications Systems 6650 - page 29

    Brocade ICX 6650 Administration Guide 11 53-1002600-01 Using slot number, and port number with CLI commands 1 • If configured on the Br ocade device, authen tication, authorization, and accoun ting is per f ormed on the actual command, not on the alias f or the command. • T o sa ve an alias definition to the star tup-config file, use the write ...

  • Brocade Communications Systems 6650 - page 30

    12 Brocade ICX 6650 Administration Guide 53-1002600-01 Using slot number, and port number with CLI commands 1 ...

  • Brocade Communications Systems 6650 - page 31

    Brocade ICX 6650 Administration Guide 13 53-1002600-01 Chapter 2 Basic Software Features In this chapter • Basic syste m parameter configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4 • Specifying an SNTP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 • Configuring the de vice as ...

  • Brocade Communications Systems 6650 - page 32

    14 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic system parameter configuration 2 Basic system parameter configuration Brocade devices are configured at the factory with default paramet ers that allow you to begin using the basic f eatures of the system immediat ely. Howe ver , many of the adva nced features suc h as VLANs or routing pr ...

  • Brocade Communications Systems 6650 - page 33

    Brocade ICX 6650 Administration Guide 15 53-1002600-01 Basic system parameter configuration 2 Entering system administration information Y ou can confi gure a system name, contact, and location for a Br ocade device and sav e the information locally in the configurat ion file for future ref erence. This inform ation is not required f or system ope ...

  • Brocade Communications Systems 6650 - page 34

    16 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic system parameter configuration 2 When you add a trap receiver , the sof tware au t omatically encr ypts the commu nity string you associate with the receiv er when the string is displa yed by the CLI. If you want the software to sho w the community string in the clear , you must explicit ...

  • Brocade Communications Systems 6650 - page 35

    Brocade ICX 6650 Administration Guide 17 53-1002600-01 Basic system parameter configuration 2 Setting the SNMP trap holddown time When a Broc ade device star ts up, the software waits for La yer 2 con vergence (S TP) and Lay er 3 conv ergence (OSPF) before beginning t o send SN MP traps to ext ernal SNMP ser vers. Until conv ergence occurs, the dev ...

  • Brocade Communications Systems 6650 - page 36

    18 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic system parameter configuration 2 • Po wer supply failure • Fan f ai l ur e • Cold star t • Link up • Link down • Bridge new r o ot • Bridge t opology change • Locked address violation • BGP4 • OSPF • VRRP • VRRP-E T o st op link down occurrences fr om being repor t ...

  • Brocade Communications Systems 6650 - page 37

    Brocade ICX 6650 Administration Guide 19 53-1002600-01 Basic system parameter configuration 2 NOTE The Privileged EXEC lev e l is sometimes called the “Enable” lev el, because the command for accessing this lev el is enable . The f eature is enabled by default. Examples of Syslog messages for CLI access When a user whose access is authenticated ...

  • Brocade Communications Systems 6650 - page 38

    20 Brocade ICX 6650 Administration Guide 53-1002600-01 Specifying an SNTP server 2 Brocade(config)# no logging enable user-login Brocade(config)# write memory Brocade(config)# end Brocade# reload Syntax: [ no ] logging enable user -login Cancelling an outbound Telnet session I f y o u w a n t to c a n c e l a Tel n e t s e s s i o n f ro m t h e c ...

  • Brocade Communications Systems 6650 - page 39

    Brocade ICX 6650 Administration Guide 21 53-1002600-01 Specifying an SNTP server 2 The authentica tion-ke y option allows y ou to configure an authentication key f or communication with the SNTP server . When the authentication k ey is configured f or an SNTP client, it is used only for an SNTP unicast client. Y ou must assign a unique server < ...

  • Brocade Communications Systems 6650 - page 40

    22 Brocade ICX 6650 Administration Guide 53-1002600-01 Specifying an SNTP server 2 T o displa y detailed information ab out SNTP associat ions, ent er the show sntp associations detai ls command. Syntax: show sntp as sociations details The follo wing table describes the information displa yed by the show sntp associations details command. TA B L E ...

  • Brocade Communications Systems 6650 - page 41

    Brocade ICX 6650 Administration Guide 23 53-1002600-01 Configuring the device as an SNTP server 2 T o displa y information about SNTP status, ent er the show sntp statu s command. Syntax: show sntp status The follo wing table describes the information displa yed by the show sntp status command. Configuring the device as an SNTP server Y ou can conf ...

  • Brocade Communications Systems 6650 - page 42

    24 Brocade ICX 6650 Administration Guide 53-1002600-01 Configuring the device as an SNTP server 2 T o use the de vice as a an SNTP server , ent er a command such as the follo wing at the Privileged EXEC lev el. Brocade(config)# sntp server-mode use-local-clock authentication-key abc123 Brocade(config)# write memory The abo ve example c onfigures th ...

  • Brocade Communications Systems 6650 - page 43

    Brocade ICX 6650 Administration Guide 25 53-1002600-01 Configuring the device as an SNTP server 2 Displaying SNTP server information Use the sho w sntp ser ver -mode command to displa y the status of the SNTP server and its configuration. Syntax: show sntp server-mode Enabling broadcast mode for an SNTP client T h e B r o c a d e d e v i c e c a n ...

  • Brocade Communications Systems 6650 - page 44

    26 Brocade ICX 6650 Administration Guide 53-1002600-01 Configuring the device as an SNTP server 2 network until the last message is received from the system clock. T o update the system clock with the last message receiv ed, you can enable the SNTP client to either list en to all NTP broadcast servers on any int er face, or enable the SNTP clie nt ...

  • Brocade Communications Systems 6650 - page 45

    Brocade ICX 6650 Administration Guide 27 53-1002600-01 Configuring the device as an SNTP server 2 Syntax: sntp sync By default, Br ocade switches and rout ers do not ch ange the syst em time for da ylight saving time. T o enable d aylight saving time , enter the clock summer -time command. Brocade(config)# clock summer-time Syntax: [ no ] clock sum ...

  • Brocade Communications Systems 6650 - page 46

    28 Brocade ICX 6650 Administration Guide 53-1002600-01 Configuring the device as an SNTP server 2 The DST f eature is automatic, but t o trigger the device t o the correct time, the device must be configured to the US time zone, not the GMT offset . T o configure y our device to use the US time zone, enter the clock timezone us pacific command. Bro ...

  • Brocade Communications Systems 6650 - page 47

    Brocade ICX 6650 Administration Guide 29 53-1002600-01 Configuring the device as an SNTP server 2 NOTE The banner <delimiting-character> command is equivalent to the banner motd <delimiting-character> command. NOTE If you are using a W eb client to vie w the message of the da y , and your banners are v er y wide, with large borders, y o ...

  • Brocade Communications Systems 6650 - page 48

    30 Brocade ICX 6650 Administration Guide 53-1002600-01 Configuring the device as an SNTP server 2 Setting a privileged EX EC CLI level banner Y ou can configure the Br ocade device t o display a message when a user ent ers the Privileged EXEC CLI lev el. Example Brocade(config)# banner exec_mode # (Press Return) Enter TEXT message, End with the cha ...

  • Brocade Communications Systems 6650 - page 49

    Brocade ICX 6650 Administration Guide 31 53-1002600-01 Basic port parameter configuration 2 Y ou can co nfigure the Brocade de vice to use a differe nt MAC address f or Layer 2 management traf fic than for switched traffic. When you issue the use-local-management-mac , the Br ocade device changes a local bit in the f irst por t MAC address and uses ...

  • Brocade Communications Systems 6650 - page 50

    32 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 Port speed and duplex mode modification The Gigabit Ethernet copper por ts are designed to aut o-sense and auto-neg otiate the speed and duplex mod e of the connected de vice. If the atta ched de vice does not suppor t this operation, you can manually ente ...

  • Brocade Communications Systems 6650 - page 51

    Brocade ICX 6650 Administration Guide 33 53-1002600-01 Basic port parameter configuration 2 Downgrading the Brocade IC X 6650 front panel ports from 10 GbE to 1 GbE port speed Ports 1/1/1 through 1/1/5 6 port speed can be downgraded from 10 GbE to 1 GbE port spe ed. NOTE Ports 1/1/33 through 1/1/56 can only be do wngrad ed to 1 GbE por t speed if y ...

  • Brocade Communications Systems 6650 - page 52

    34 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 The port speed down-shif t and maximum port spee d advertisement features operat e dynamically at the physical link la yer , independent of logical trunk group configurations. Although Brocade recommends that you use the same cable type s and auto-negotiat ...

  • Brocade Communications Systems 6650 - page 53

    Brocade ICX 6650 Administration Guide 35 53-1002600-01 Basic port parameter configuration 2 Disabling or re-enabling a port A por t can be made inactive (disable) or active (enable) b y selecting t he appropriat e status option. The default value f or a por t is enabled. T o disable port 1/1/1 of a Brocad e device, ente r the following. Brocade(con ...

  • Brocade Communications Systems 6650 - page 54

    36 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 T o disable flo w control, ent er the no flow-control command. Brocade(config)# no flow-control T o turn the feature bac k on, enter the flow-control command. Brocade(config)# flow-control Syntax: [ no ] flow-con trol NOTE For optimal link operation, link ...

  • Brocade Communications Systems 6650 - page 55

    Brocade ICX 6650 Administration Guide 37 53-1002600-01 Basic port parameter configuration 2 Displaying flow-control status The show inter face <stack -unit> / <slot> / <por t> command displays c onfiguration, operation, and negotiation status where applicable. For e xample, issuing the command fo r 10/1 00/1 000M por t 1/1/36 disp ...

  • Brocade Communications Systems 6650 - page 56

    38 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 About XON and XOFF thresholds An 802.3x P A USE frame is generated when the buffer limit at the ingress por t reaches or ex ceeds the por t’s upper wat ermark threshold (XOFF limit). The P A USE frame requests that the sender stop transmitting traf fic f ...

  • Brocade Communications Systems 6650 - page 57

    Brocade ICX 6650 Administration Guide 39 53-1002600-01 Basic port parameter configuration 2 Enabling and disabling sy mmetric flow control By default, symmet ric flow control is disabled an d tail dro p mode is enabled. How ever , because flow contr ol is enabled by default on all full-duplex ports, these por ts will al wa ys honor received 802.3x ...

  • Brocade Communications Systems 6650 - page 58

    40 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 • Negotiate- full-auto – The port first tries to perform a handshak e with the other por t to ex change capability inf ormation. If the other port does not respond to the handshak e attempt, the por t uses the manually configured config uration inf orm ...

  • Brocade Communications Systems 6650 - page 59

    Brocade ICX 6650 Administration Guide 41 53-1002600-01 Basic port parameter configuration 2 Configuring port flap damp ening on an interface This f eature is configured at the inter face lev el. Brocade(config)# interface ethernet 1/1/1 Brocade(config-if-e10000-1/1/1)# link-error-disable 10 3 10 Syntax: [ no ] link-err or-disable <toggle-thresho ...

  • Brocade Communications Systems 6650 - page 60

    42 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 Ta b l e 1 0 defines the por t flap dampenin g statistics displayed b y the show link-error -disable all command. Syntax: show link-err or-disable [all ] Syslog messages for port flap dampening The f ollowing Syslog messages are generat ed for port flap da ...

  • Brocade Communications Systems 6650 - page 61

    Brocade ICX 6650 Administration Guide 43 53-1002600-01 Basic port parameter configuration 2 Port loop detection This f eature allows the Br ocade device to disable a por t that is on the receiving end of a loop by sending test pack ets. Y ou can configure the time period during which test pack ets ar e sent. Types of loop detection There are tw o t ...

  • Brocade Communications Systems 6650 - page 62

    44 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 loops because S TP cannot pre vent loops across diff erent VLANs. In these instances, the por ts are not block ed and loop detection is able t o send out pr obe packets in one VL AN and receive pack ets in another VLAN. In this wa y, lo op detection runni ...

  • Brocade Communications Systems 6650 - page 63

    Brocade ICX 6650 Administration Guide 45 53-1002600-01 Basic port parameter configuration 2 Brocade(config)# errdisable recovery cause loop-detection The abov e command will cause the Br ocade ICX 6650 device to automatically re-enable por ts that were disable d because of a loop detection. By def ault, the device will w ait 300 seconds before re-e ...

  • Brocade Communications Systems 6650 - page 64

    46 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 The f ollowing command displays the current disa bled ports, including the cause and the time. Brocade# show loop-detection disable Number of err-disabled ports: 2 You can re-enable err-disable ports one by one by "disable" then "enable" ...

  • Brocade Communications Systems 6650 - page 65

    Brocade ICX 6650 Administration Guide 47 53-1002600-01 Basic port parameter configuration 2 Displaying loop detection config uration status on an interface Use the sho w inter face command to display the status o f loop detection c onfiguration o n a par ticular interface. Brocade# show interface ethernet 1/1/1 10GigabitEthernet1/1/1 is disabled, l ...

  • Brocade Communications Systems 6650 - page 66

    48 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic port parame ter configuratio n 2 ...

  • Brocade Communications Systems 6650 - page 67

    Brocade ICX 6650 Administration Guide 49 53-1002600-01 Chapter 3 Operations, Administra tion, and Maintenance In this chapter • OAM Ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 • Sof tware v ersions installed and running on a device . . . . . . . . . . . . . . . . . . 50 • Ima ...

  • Brocade Communications Systems 6650 - page 68

    50 Brocade ICX 6650 Administration Guide 53-1002600-01 OAM Overview 3 OAM Overview For easy software image management, all Broca de ICX 6650 de vices suppor t the download and upload of soft ware images betw een the flash modules on the devices and a T rivial File T ransfer Pro tocol (TFTP) server on the network. Br ocade devices ha ve tw o flash m ...

  • Brocade Communications Systems 6650 - page 69

    Brocade ICX 6650 Administration Guide 51 53-1002600-01 Software versions installed an d running on a device 3 UNIT 1: SL 1: ICX6650-64 56-port Management Module Serial #: CEN2525H006 License: BASE_SOFT_PACKAGE (LID: egpHKHKjFFL) P-ENGINE 0: type EC02, rev 01 ========================================================================== UNIT 1: SL 2: IC ...

  • Brocade Communications Systems 6650 - page 70

    52 Brocade ICX 6650 Administration Guide 53-1002600-01 Software versions installed and running on a device 3 • The “Compressed Sec Co de size” line lists the flash code v ersion installed in the secondar y flash area. • The “Boot Monitor Image size” line lists the boot code version install ed in flash memor y. The devic e does not hav e ...

  • Brocade Communications Systems 6650 - page 71

    Brocade ICX 6650 Administration Guide 53 53-1002600-01 Image file types 3 In the pre vious example, the c odes did not match, and verification f ailed. If verification succeeds, the output will look like this. Brocade#verify md5 secondary 01c410d6d153189a4a5d36c955653861 Brocade#.........................Done Size = 2044830, MD5 01c410d6d153189a4a5d ...

  • Brocade Communications Systems 6650 - page 72

    54 Brocade ICX 6650 Administration Guide 53-1002600-01 Using SNMP to upgrade software 3 Syntax: show dir T o displa y the contents of a flash configuration file, enter a command such as the f ollowing from the User EXEC or Privileged EXEC mode of the CLI: Syntax: copy flash console < filename > For < filename >, enter the name of a file ...

  • Brocade Communications Systems 6650 - page 73

    Brocade ICX 6650 Administration Guide 55 53-1002600-01 Using SNMP to upgrade software 3 NOTE The syntax shown in this section assumes that you ha ve installed HP OpenView in the “/usr” directory . NOTE Brocade recommends that y ou make a back up copy of the star tup-config file before you upgrade the soft ware. I f you need to run an older rele ...

  • Brocade Communications Systems 6650 - page 74

    56 Brocade ICX 6650 Administration Guide 53-1002600-01 Software reboot 3 Software reboot Y ou can use boot commands to immediat ely initia te software boots from a sof tware image stored in primary or secondar y flash on a Brocade device or fr om a BootP or TFTP ser ver . Y ou can test new versions of code on a Brocade d evice or choose the preferr ...

  • Brocade Communications Systems 6650 - page 75

    Brocade ICX 6650 Administration Guide 57 53-1002600-01 Loading and saving configuration files 3 Syntax: show boot-pref erence The results of the show run command f or the configured exam ple above appear as follows. Brocade#show run Current configuration: ! ver 07.5.00B1T323 ! stack unit 1 module 1 icx6650-64-56-port-management-module module 2 icx6 ...

  • Brocade Communications Systems 6650 - page 76

    58 Brocade ICX 6650 Administration Guide 53-1002600-01 Loading and saving configuration files 3 • Running configuration file – This file contains the configur ation active in the system RAM but not ye t sav ed to flash. These changes could represent a shor t-term requirement or general configuration change. T o display this file, ent er the sho ...

  • Brocade Communications Systems 6650 - page 77

    Brocade ICX 6650 Administration Guide 59 53-1002600-01 Loading and saving configuration files 3 Copying a configuration file to or from a TFTP server T o copy the star tup-con fig or ru nning-config file to or from a TFTP ser ver , use one of the following methods. NOTE For details about the cop y and ncopy commands used with IPv6, refer t o “Usi ...

  • Brocade Communications Systems 6650 - page 78

    60 Brocade ICX 6650 Administration Guide 53-1002600-01 Loading and saving configuration files 3 • The configuration f ile is a script containing CLI configuration comma nds . The CLI reacts to each command entered fr om the file in the sa me way the CLI reacts t o the command if you enter it. F or exam ple, if the command results in an error mess ...

  • Brocade Communications Systems 6650 - page 79

    Brocade ICX 6650 Administration Guide 61 53-1002600-01 Loading and saving configuration files 3 The configuration file cont ains these commands. interface ethernet 1/1/7 ip address 10.10.10.69/24 The running-config already has a command to add an address to por t 11 , so the CLI responds like this. Brocade(config)#interface ethernet 1/1/7 Brocade(c ...

  • Brocade Communications Systems 6650 - page 80

    62 Brocade ICX 6650 Administration Guide 53-1002600-01 Loading and saving configuration files with IPv6 3 • Commands to copy the running-config to a TFTP ser ver: • copy runn ing-config tf tp <ip-addr> <filename> • ncopy running-config tf tp <ip-a ddr> <from-name> • Commands to copy the star tup-c onfig fil e to a TF ...

  • Brocade Communications Systems 6650 - page 81

    Brocade ICX 6650 Administration Guide 63 53-1002600-01 Loading and saving configuration files with IPv6 3 Brocade#copy running-config tftp 2001: DB8 :e0ff:7837::3 newrun.cfg This command copies the running configurat ion t o a TFTP ser ver with the I Pv6 address of 200 1:DB8:e0ff:783 7 ::3 and names the file on the TFTP ser ver ne wrun.cfg. Syntax: ...

  • Brocade Communications Systems 6650 - page 82

    64 Brocade ICX 6650 Administration Guide 53-1002600-01 Loading and saving configuration files with IPv6 3 NOTE T o activat e this configuratio n, yo u must reload (reset) the device. Syntax: copy tf tp running-conf ig | star tup-config <ipv6-addr ess> <source-f ile-name> [ over wr ite ] Specify the running-confi g keyw ord to c opy the ...

  • Brocade Communications Systems 6650 - page 83

    Brocade ICX 6650 Administration Guide 65 53-1002600-01 Loading and saving configuration files with IPv6 3 This command copies a device running configuratio n to a TFTP ser ver with the IPv6 address of 200 1:DB8:e0ff:783 7 ::3 and names th e destination file bakrun.cfg. Syntax: ncopy running-config | star tup-config tftp <ipv6-ad dress> <de ...

  • Brocade Communications Systems 6650 - page 84

    66 Brocade ICX 6650 Administration Guide 53-1002600-01 Loading and saving configuration files with IPv6 3 The tf tp <ipv6-address> paramet er specifies the address of the TFTP server . Y ou must specify thi s address in hexadec imal using 16-bit v alues between colons as doc umented in RFC 23 73. The <source-file-name> paramet er specif ...

  • Brocade Communications Systems 6650 - page 85

    Brocade ICX 6650 Administration Guide 67 53-1002600-01 System reload scheduling 3 20 – Upload the star tup-config file from the fl ash memory of the Brocade de vice to the TFTP ser ver . 21 – Download a star tup-config fi le from a TF TP ser ver to the flash memor y of the Br ocade devic e. 22 – Upload the running-config from the flash memory ...

  • Brocade Communications Systems 6650 - page 86

    68 Brocade ICX 6650 Administration Guide 53-1002600-01 Diagnostic error codes and remedies for TFTP transfers 3 <mm-dd-yy> is the month, da y , and year . primar y | secondar y specifies whether the reload is t o occur from the primary code flash module or the secondar y code flash module. The def ault is primar y . Reloading after a specific ...

  • Brocade Communications Systems 6650 - page 87

    Brocade ICX 6650 Administration Guide 69 53-1002600-01 Network connectivity tes ting 3 Network connectivity testing Af ter yo u install the network cables, you can test network connectivity to other devices by pinging those devices. Y ou also can ob ser ve the LEDs related to netw ork connection and perform trace rou tes . For more informatio n abo ...

  • Brocade Communications Systems 6650 - page 88

    70 Brocade ICX 6650 Administration Guide 53-1002600-01 Network connectivity testin g 3 Syntax: ping < ip addr > | < ho stname > [ source < ip addr >] [ count < num >] [ timeout < msec >] [ ttl < num >] [ siz e < by te >] [ qu iet ] [ numeric ] [ no-fragment ] [ ver i fy ] [ data < 1- to - 4 by te h ex &g ...

  • Brocade Communications Systems 6650 - page 89

    Brocade ICX 6650 Administration Guide 71 53-1002600-01 Network connectivity tes ting 3 NOTE The number of ! characters displa yed may not correspond to the number of succ essful replies by t he ping command. Simil arly , the numb er of . characters displa yed ma y not correspond to the number of ser ver timeouts that occurred while w aiting for a r ...

  • Brocade Communications Systems 6650 - page 90

    72 Brocade ICX 6650 Administration Guide 53-1002600-01 Network connectivity testin g 3 ...

  • Brocade Communications Systems 6650 - page 91

    Brocade ICX 6650 Administration Guide 73 53-1002600-01 Chapter 4 Ports on Demand Licensing In this chapter • Ports on Demand terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 • PoD licensing rule s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 • PoD licensin ...

  • Brocade Communications Systems 6650 - page 92

    74 Brocade ICX 6650 Administration Guide 53-1002600-01 Ports on Demand terminology 4 Ports on Demand terminology Ports o n Demand licensing uses the following t erms: • Entitlement cer t ificate – The pr oo f-of-purchase cer tificate (paper -pack) issued by Brocade when a license is purchase d. The cer tificate cont ains a uniq ue transaction k ...

  • Brocade Communications Systems 6650 - page 93

    Brocade ICX 6650 Administration Guide 75 53-1002600-01 PoD licensing configuration tasks 4 Obtaining a PoD license T o generat e and obtain a PoD license, com plete the f ollowing steps. 1. Order a PoD license. Refer t o Ta b l e 17 on page 84 fo r a list of a vailable licenses and associated license SKU numbers. 2. When you receiv e the paper -pac ...

  • Brocade Communications Systems 6650 - page 94

    76 Brocade ICX 6650 Administration Guide 53-1002600-01 PoD licensing configuration tasks 4 Figure 1 shows the Sof tware Portal Login window . FIGURE 1 Brocade Sof tware Por tal Login window ...

  • Brocade Communications Systems 6650 - page 95

    Brocade ICX 6650 Administration Guide 77 53-1002600-01 PoD licensing configuration tasks 4 Fro m t h e License Management menu, select Brocade IP/ADP > License Generation with T ransaction k ey . The IP/ADP License Generation window displays. FIGURE 2 License Management W elcome window ...

  • Brocade Communications Systems 6650 - page 96

    78 Brocade ICX 6650 Administration Guide 53-1002600-01 PoD licensing configuration tasks 4 Figure 3 shows the IP/ADP License Generation window for generating a license using a transaction k ey and LID. FIGURE 3 IP/ADP License Generation w indow Enter the req uired information. • For a description of the field, move the pointer o ver the field. ? ...

  • Brocade Communications Systems 6650 - page 97

    Brocade ICX 6650 Administration Guide 79 53-1002600-01 PoD licensing configuration tasks 4 NOTE Y ou can generat e more than on e license at a time. F or each license request, ente r the Unit's Unique License ID and T ransaction Key , an d click Add. When you ha ve finished ent ering the required inf ormation, read the Brocade End User License ...

  • Brocade Communications Systems 6650 - page 98

    80 Brocade ICX 6650 Administration Guide 53-1002600-01 Viewing PoD licensing information from the Brocade software portal 4 5. Upload the license f ile to the Br ocade device. 6. Use the show li cense command to verify that the license is c orrectly installed on the device. Viewing PoD licensing information from the Brocade software portal This sec ...

  • Brocade Communications Systems 6650 - page 99

    Brocade ICX 6650 Administration Guide 81 53-1002600-01 Viewing PoD licensing information from the Brocade software portal 4 NOTE The transaction search will n ot return an y results if the transactio n key has not been activ ated. Figure 6 sho ws an exam ple of the license query results. FIGURE 6 License Quer y Results window In this ex ample, the ...

  • Brocade Communications Systems 6650 - page 100

    82 Brocade ICX 6650 Administration Guide 53-1002600-01 Transferring a PoD license 4 Transferring a PoD license A license can be transf erred between B rocade devi ces if both the following conditions are true: • The device is under an ac tive suppor t contract. • The license is being transf erred between tw o similar models (for e xample, from ...

  • Brocade Communications Systems 6650 - page 101

    Brocade ICX 6650 Administration Guide 83 53-1002600-01 Ports on Demand Licensing 4 FIGURE 7 Brocade ICX 6650 front panel Rear panel Flexible Ports on Demand The rear panel has 6 QSFP+ por ts: • 2 pairs of 40 ports that are error -disabled by def ault. F or a detailed description of the por t states (up, down, or error -disabled), ref er to “Con ...

  • Brocade Communications Systems 6650 - page 102

    84 Brocade ICX 6650 Administration Guide 53-1002600-01 Ports on Demand Licensing 4 NOTE T rial licenses are not av ailable for PoD licensing . Enabling ports on the front panel By default, ports 1/1/33 to 1/1/56 are in an er ror -disabled state. Use the ICX6650-1 0G-LIC-POD license to enable these por ts. Once enabled, the ports ar e up at 1 0 GbE ...

  • Brocade Communications Systems 6650 - page 103

    Brocade ICX 6650 Administration Guide 85 53-1002600-01 Ports on Demand Licensing 4 1. Download the ICX6650-1 0G-LIC-POD license fr om the Brocade sof tware portal onto the Brocade device. 2. Place the license file on a TFTP or SCP serv er t o which the Brocade d evice has access t o. 3. Use TFTP or SCP to cop y the file to th e license database of ...

  • Brocade Communications Systems 6650 - page 104

    86 Brocade ICX 6650 Administration Guide 53-1002600-01 Ports on Demand Licensing 4 Deleting a ICX6650-10G-LIC-POD license When downgrading t o a lower por t capacity lice nse using the ICX6650-1 0G-LIC-POD license, y ou must first delete the higher por t capacity license and then re-install th e low e r por t capacity license in your syst em. A rel ...

  • Brocade Communications Systems 6650 - page 105

    Brocade ICX 6650 Administration Guide 87 53-1002600-01 Ports on Demand Licensing 4 Syntax: show pod For more inf orm ation about the license delete command, refer to “Dele ting a 10 GbE or 40 GbE license” on page 90. Enabling ports on the rear panel By default, ports on the rear panel are in an error -disabled state. Use the ICX66 50-40G-LIC-PO ...

  • Brocade Communications Systems 6650 - page 106

    88 Brocade ICX 6650 Administration Guide 53-1002600-01 Ports on Demand Licensing 4 The ipv6_address v ariable is the address of the IPv6 TFTP server . The license_filename_on_host variable is the file name of the license file. The unit unit_id variable specifies a unit for which you want t o add a sof tware license file. The unit_id variable is 1. ...

  • Brocade Communications Systems 6650 - page 107

    Brocade ICX 6650 Administration Guide 89 53-1002600-01 Ports on Demand Licensing 4 Disabling the FPoD ports on the rear panel Enter the following command to disable the por ts in group 1. Brocade(config)# no fpod-40g-enable group 1 Ports 1/2/1 and 1/2/2 in gr oup 1 are disabled. With a 2-port capacity license, yo u can choose to enable an y one gro ...

  • Brocade Communications Systems 6650 - page 108

    90 Brocade ICX 6650 Administration Guide 53-1002600-01 Ports on Demand Licensing 4 Syntax: show pod Deleting a 10 GbE or 40 GbE license A PoD license r emains in the licens e database until it is delet ed. T o dele te all PoD (1 0 GbE or 40 GbE) license file s fr om a unit, enter the following command at the privileged EXEC le vel of the CLI. Broca ...

  • Brocade Communications Systems 6650 - page 109

    Brocade ICX 6650 Administration Guide 91 53-1002600-01 Viewing information about PoD licenses 4 T o dele te a specific license file fro m a unit, en ter the f ollowing command at the privileged EXEC lev el of the CLI. Brocade# license delete unit 1 index 1 Syntax: license delete unit unit_id [ all | index license_index ] The unit_id var iab le spec ...

  • Brocade Communications Systems 6650 - page 110

    92 Brocade ICX 6650 Administration Guide 53-1002600-01 Viewing information about PoD licenses 4 Displaying general license information for PoD ports T o displa y general license information abou t the P oD license in the de vice, use the sho w license command. The sh ow license command only displays software license information f or a u nit, not ha ...

  • Brocade Communications Systems 6650 - page 111

    Brocade ICX 6650 Administration Guide 93 53-1002600-01 Viewing information about PoD licenses 4 T o displa y PoD license information for unit 1 on a Brocade ICX 6650 device, enter the show license unit unit_id command. In the f ollowing example, the 10 GbE and 40 G bE Brocade ICX 6650 P oD licenses are installed on unit 1. Syntax: show li cense [ u ...

  • Brocade Communications Systems 6650 - page 112

    94 Brocade ICX 6650 Administration Guide 53-1002600-01 Viewing information about PoD licenses 4 Ta b l e 1 9 describes the inf ormation displa yed by the show license unit unit_id [ index index_number ] command. Displaying the license co nfiguration fo r PoD ports for the Brocade ICX 6650 T o displa y the license configuration f or PoD por ts in th ...

  • Brocade Communications Systems 6650 - page 113

    Brocade ICX 6650 Administration Guide 95 53-1002600-01 Viewing information about PoD licenses 4 Syntax: show pod Ta b l e 2 0 describes the information displa yed in the output of the sho w pod com mand. Brocade(config)#show pod Unit-Id: 1 PoD 10G license capacity: 16 PoD 10G license capacity used: 16 PoD 40G license capacity: 6 PoD 40G license cap ...

  • Brocade Communications Systems 6650 - page 114

    96 Brocade ICX 6650 Administration Guide 53-1002600-01 Viewing information about PoD licenses 4 TA B L E 2 0 Output from the sho w pod command Configuration consideratio ns when configuring PoD for Brocade ICX 6650 devices Consider the follo wing when conf iguring PoD f or Brocade ICX 6650 de vices: • Y ou can add a ICX6650-2P40G-POD lic ense to ...

  • Brocade Communications Systems 6650 - page 115

    Brocade ICX 6650 Administration Guide 97 53-1002600-01 Viewing information about PoD licenses 4 A por t is in a down stat e when there is no phys ical link between two devices, and a license is installed in the de vice. The show inter face ethernet command displays the por t in the down state. The follo wing example output is fr om a Brocade ICX 66 ...

  • Brocade Communications Systems 6650 - page 116

    98 Brocade ICX 6650 Administration Guide 53-1002600-01 Viewing information about PoD licenses 4 ...

  • Brocade Communications Systems 6650 - page 117

    Brocade ICX 6650 Administration Guide 99 53-1002600-01 Chapter 5 IPv6 Configuration on Brocade ICX 6650 Switch In this chapter • F ull Lay er 3 IPv6 feature support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1 • IPv6 addressing ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 ...

  • Brocade Communications Systems 6650 - page 118

    100 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 Configuration on Brocade ICX 6650 Switch 5 1 The f ollowing IPv6 f eatures, listed in T able 21, ar e documented in other chapt ers or sections of this guide: • IPv6 access list – Brocade ICX 6650 Switch Security Configuration Guide • IPv6 copy – “Using the I Pv6 copy command” ...

  • Brocade Communications Systems 6650 - page 119

    Brocade ICX 6650 Administration Guide 101 53-1002600-01 Full Layer 3 IPv6 feature support 5 • IPV6 routing pr otocols – Various chapters Full Layer 3 IPv6 feature support T he fo ll o wi n g IP v 6 Lay er 3 fe at u r es a r e s u p po r te d : • IPv6 unicast routing (multicast r outing is not suppor ted) • OSPF V3 • RIPng • IPv6 ICMP re ...

  • Brocade Communications Systems 6650 - page 120

    102 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 addressing overview 5 • The hexadecimal letters in IPv6 addresses are not case-sensitive As shown in Figure 9 , the IPv6 network prefix is composed of the left-most bits of the address. As with an IPv4 address, y ou can specify the IPv6 prefix using the <p refix> / <p refix-len ...

  • Brocade Communications Systems 6650 - page 121

    Brocade ICX 6650 Administration Guide 103 53-1002600-01 IPv6 addressing overview 5 . A switch automatically configures a link-local unicas t address f or an inter face by using the prefix of FE80::/1 0 (11 11 1 11 0 10) and a 64-bit int er face ID. The 128-bit IPv6 address is then subject ed to duplicate address de tection to ensure that the addr e ...

  • Brocade Communications Systems 6650 - page 122

    104 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 CLI command support 5 IPv6 stateless auto-configuration Brocade routers use the IPv6 stat eless autoconfigurat ion feature to enable a host on a local link to automatically configure its inter faces with new an d globally uniq ue IPv6 addresses associated with its location. The automatic ...

  • Brocade Communications Systems 6650 - page 123

    Brocade ICX 6650 Administration Guide 105 53-1002600-01 IPv6 CLI command support 5 clear ipv6 tunnel Clears statist ics for IPv6 tunnels X copy tftp Do wnloads a copy of a Brocade software image from a TFTP se r ver into th e syst em flash using IPv6. XX debug ipv6 Displays IPv6 debug inf ormation. X X ipv6 access-class Configures access contr ol f ...

  • Brocade Communications Systems 6650 - page 124

    106 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 host addres s on a Layer 2 switch 5 IPv6 host address on a Layer 2 switch In a La yer 3 (rout er) configuration, each por t ca n be configured separately with an I Pv6 address. This is accomplished using the interface configurat ion process that is described in “IPv6 configuration on ea ...

  • Brocade Communications Systems 6650 - page 125

    Brocade ICX 6650 Administration Guide 107 53-1002600-01 IPv6 host addres s on a Layer 2 switch 5 NOTE W h en c o n f i g u r in g a n I p v6 h o s t a d d re s s o n a L aye r 2 s w it c h t h a t h as m u l t i pl e V L A N s , m ake s u r e t h e configuration includes a designat ed management VLAN that identifies the VLAN t o which the global IP ...

  • Brocade Communications Systems 6650 - page 126

    108 Brocade ICX 6650 Administration Guide 53-1002600-01 Configuring the management port for an IPv6 automatic address configuration 5 Configuring the management port for an IPv6 automatic address configuration Y ou can have the management po r t configure d to automatically obtain an IPv6 address. This process is the same for an y other por t and i ...

  • Brocade Communications Systems 6650 - page 127

    Brocade ICX 6650 Administration Guide 109 53-1002600-01 Configuring basic IPv6 connectivity on a Layer 3 switch 5 • Configuring a global or site-local address with a manually configured or automatically comput ed inter face ID f or an inter face. • Auto ma tically or manually configuring a link-local address f or an interface. • Configuring I ...

  • Brocade Communications Systems 6650 - page 128

    110 Brocade ICX 6650 Administration Guide 53-1002600-01 Configuring basic IPv6 connectivity on a Layer 3 switch 5 Type IPv6 Prefix Next Hop Router Interface Dis/Metric C 2001:DB8/122 :: ve 11 0/0 Configuring a global IPv6 address with an automatically computed EUI-64 interface ID T o configure a global IPv6 address with an au tomatically comput ed ...

  • Brocade Communications Systems 6650 - page 129

    Brocade ICX 6650 Administration Guide 111 53-1002600-01 Configuring basic IPv6 connectivity on a Layer 3 switch 5 Y ou must specify th e <ipv6-address> paramet er in hexadecimal using 1 6-bit values betw een colons as docu mented in RFC 23 73. The link-local keyw ord indicat es that the rout er inter f ace should use the manually configured l ...

  • Brocade Communications Systems 6650 - page 130

    112 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 management on Brocade ICX 66 50 devices (IPv6 host support) 5 The secondar y ke yword spec ifies that the configured address is a secondary IPv4 address. T o remo ve the IPv4 address from the int er face, enter the no f orm of this command. Syntax: ipv6 address <ipv6-prefix> / <p ...

  • Brocade Communications Systems 6650 - page 131

    Brocade ICX 6650 Administration Guide 113 53-1002600-01 IPv6 management on Brocad e ICX 6650 devices (IPv6 host support) 5 Restricting SNMP access to an IPv6 node Y ou can restrict SNMP access t o the device to the IPv6 host whose IP address you sp ecify . T o do so, enter a command such as the f ollowing. Brocade(config)#snmp-client ipv6 2001:DB8: ...

  • Brocade Communications Systems 6650 - page 132

    114 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 management on Brocade ICX 66 50 devices (IPv6 host support) 5 T o open an S SH session between an IPv6 host running an S SH client program and the Br ocade devic e, open the SSH client program and specif y the IPv6 address of the de vice. For more information about configuring SSH on the ...

  • Brocade Communications Systems 6650 - page 133

    Brocade ICX 6650 Administration Guide 115 53-1002600-01 IPv6 management on Brocad e ICX 6650 devices (IPv6 host support) 5 The CLI displa ys trace rout e information f or each hop as soon as the information is receiv ed. T racerout e requests displa y all responses t o a minimum TTL of 1 second and a maxi mum TTL of 30 seconds. In additio n, if the ...

  • Brocade Communications Systems 6650 - page 134

    116 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 management on Brocade ICX 66 50 devices (IPv6 host support) 5 As an example, in a configuration where f tp6.com panyA.com is a server with an IPv6 pr otocol stack, when a user pings f tp6.compan yA .com, th e Brocade de vice attempts t o resolve the AAAA DNS record. In addition, if the DN ...

  • Brocade Communications Systems 6650 - page 135

    Brocade ICX 6650 Administration Guide 117 53-1002600-01 IPv6 management on Brocad e ICX 6650 devices (IPv6 host support) 5 • The data <1 - 4 byte hex> paramet er lets you spe cify a specific data pattern f or the payload instead of the default data pattern, "abcd", in the packet's data pa yload. The pattern repeats itself thr ...

  • Brocade Communications Systems 6650 - page 136

    118 Brocade ICX 6650 Administration Guide 53-1002600-01 Static IPv6 route configuration 5 vsrp: Enable Total Trap-Receiver Entries: 4 Trap-Receiver IP-Address Port-Number Community 1 192.147.201.100 162 ..... 2 2001:DB8::200 162 ..... 3 192.147.202.100 162 ..... 4 2001:DB8::200 162 ..... Disabling router advertisement and solicitation messages Rout ...

  • Brocade Communications Systems 6650 - page 137

    Brocade ICX 6650 Administration Guide 119 53-1002600-01 Static IPv6 route configuration 5 Before configuring a static IPv6 route, you must en able the f or war ding of IPv6 traff ic on the La yer 3 switch using the ipv6 unicas t-routing command and enable IPv6 on at least one interface by configuring a n IPv6 address or explicitly enabling IPv6 on ...

  • Brocade Communications Systems 6650 - page 138

    120 Brocade ICX 6650 Administration Guide 53-1002600-01 Static IPv6 route configuration 5 A metric is a value that the La yer 3 switch uses wh en comparing this route to other static r outes in the IPv6 static r oute table that ha ve the same des tin ation. The metric applies only to r outes that the Lay er 3 switch has already placed in the IPv6 s ...

  • Brocade Communications Systems 6650 - page 139

    Brocade ICX 6650 Administration Guide 121 53-1002600-01 IPv6 over IPv4 tunnels 5 IPv6 over IPv4 tunnels NOTE This f eature is suppor ted only with the IPv6 Layer 3 PROM and the full La yer 3 image. T o enable communication between isolated IPv6 domains using the IPv4 infrastructure, you can manually configure IPv6 over IPv4 tunnels that pr ovide st ...

  • Brocade Communications Systems 6650 - page 140

    122 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 over IPv4 tun nels 5 Brocade(config)#interface tunnel 1 Brocade(config-tnif-1)#tunnel source ethernet 1/1/1 Brocade(config-tnif-1)#tunnel destination 192.162.100.1 Brocade(config-tnif-1)#tunnel mode ipv6ip Brocade(config-tnif-1)#ipv6 enable This exam ple creates tunnel int er f ace 1 and ...

  • Brocade Communications Systems 6650 - page 141

    Brocade ICX 6650 Administration Guide 123 53-1002600-01 IPv6 over IPv4 tunnels 5 For e xample, to clear statistics for tunnel 1, enter the f ollowing command at the Privileged EXEC lev el or an y of the Config le vels of the C LI. Brocade#clear ipv6 tunnel 1 T o clear statistics for all IPv6 tunnels, enter the follo wing command. Brocade#clear ipv6 ...

  • Brocade Communications Systems 6650 - page 142

    124 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 over IPv4 tun nels 5 Syntax: show interfaces tunnel <number> The <number> paramet er indicates the tunnel int er face numb er for whic h you want to displa y information. This display sho w s the f ollowing information. Displaying interface level IPv6 settings T o displa y Int ...

  • Brocade Communications Systems 6650 - page 143

    Brocade ICX 6650 Administration Guide 125 53-1002600-01 IPv6 over IPv4 tunnels 5 The displa y command above reflec ts the following configuration. This display sho w s the f ollowing information. TA B L E 2 7 Interface leve l IPv6 tunnel information Field Descripti on Interface T unnel status The status of the tunnel int er face can be one of the f ...

  • Brocade Communications Systems 6650 - page 144

    126 Brocade ICX 6650 Administration Guide 53-1002600-01 ECMP load sharing for IPv6 5 ECMP load sharing for IPv6 The IPv6 r oute table selects the best r oute t o a given destinatio n from among the ro utes in the tables maintained by the configured routing pr otoc ols (BGP4, OSPF , static, and so on). The IPv6 rout e table can contain more than one ...

  • Brocade Communications Systems 6650 - page 145

    Brocade ICX 6650 Administration Guide 127 53-1002600-01 ECMP load sharing for IPv6 5 Disabling or re-enabling ECMP load sharing for IPv6 ECMP load sharing for IPv6 is enabled b y default . T o disable the f eature, enter the follo wing command. Brocade(config)#no ipv6 load-sharing If you want to re-enable the feature af ter disabling it, you must s ...

  • Brocade Communications Systems 6650 - page 146

    128 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 ICMP feature configuration 5 IPv6 ICMP feature configuration As with the Internet Contr ol Message Prot ocol (I CMP) f or IPv4, ICMP for IPv6 provides err or and informational messages. Im plementation of the stat eless auto configuration, neighbor discov er y , and path MTU discov er y f ...

  • Brocade Communications Systems 6650 - page 147

    Brocade ICX 6650 Administration Guide 129 53-1002600-01 IPv6 neighbor discovery configuratio n 5 Enabling IPv6 ICMP redirect messages NOTE This f eature is suppor ted only with the IPv6 Layer 3 PROM and the full La yer 3 image. Y ou can enable a La yer 3 switch t o send an IPv6 ICMP redirect message to a neighboring host to i nfo r m i t o f a b e ...

  • Brocade Communications Systems 6650 - page 148

    130 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 neighbor discovery co nfiguration 5 • Interval between r outer advertisement messages. • V alue that indi cates a r outer is advertised as a default router (f or use by all nodes on a given link). • Prefixes advertised in router adv er t isement messages. • Flags fo r host sta tef ...

  • Brocade Communications Systems 6650 - page 149

    Brocade ICX 6650 Administration Guide 131 53-1002600-01 IPv6 neighbor discovery configuratio n 5 Router advertisement and solicitation messages Rout er adver tisement an d solicitation messages enable a node on a link to disco ver the rout ers on the same link. Each configured r o uter int er face on a link sends out a router adv er tisement messag ...

  • Brocade Communications Systems 6650 - page 150

    132 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 neighbor discovery co nfiguration 5 NOTE Duplicate A ddress Detection (DAD) is not currently suppor ted with IPv6 tunnels. Ma k e s ure tunnel endpoints do not ha ve duplicat e IP addresses. Y ou can co nfigure the f ollowing neig hbor solicita tion message paramet ers that af fect duplic ...

  • Brocade Communications Systems 6650 - page 151

    Brocade ICX 6650 Administration Guide 133 53-1002600-01 IPv6 neighbor discovery configuratio n 5 When adjusting these paramet er settings, Brocade recommends that the interval between r outer advertisem ent transmission be less than or equal t o the router lif etime value if the r outer is advertised as a default router . For example, t o adju st t ...

  • Brocade Communications Systems 6650 - page 152

    134 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 neighbor discovery co nfiguration 5 Prefixes advertised in IPv6 router advertisement messages By default, r outer advertisement messages include prefixes config ured as addresses on router interfaces using the ipv6 address command. Y ou can use the ipv6 nd prefix-adver tisement command to ...

  • Brocade Communications Systems 6650 - page 153

    Brocade ICX 6650 Administration Guide 135 53-1002600-01 IPv6 neighbor discovery configuratio n 5 Setting flags in IPv6 router advertisement messages An IPv6 rout er advert isement message can include the f ollowing flags: • Managed Address Config uration —This fl ag indicates to hosts on a loc al link if they should u se the stateful autoconfig ...

  • Brocade Communications Systems 6650 - page 154

    136 Brocade ICX 6650 Administration Guide 53-1002600-01 IPv6 MTU 5 Configuring reachable time for remote IPv6 nodes Y ou can configure the duration (in seconds) that a rout er considers a remote I P v6 node reachable. By default, a router int er face uses the value of 3 0 seconds. The rout er advertisement messages sent by a r outer int er face inc ...

  • Brocade Communications Systems 6650 - page 155

    Brocade ICX 6650 Administration Guide 137 53-1002600-01 Static neighbor entries configuratio n 5 • For a virtual routing interface, the maximum value of the MTU is the maximum frame size configured for the VLAN to which it is associa ted, minus 18 (Lay er 2 MAC header + CRC). If a maximum fram e size for a VLAN is not configured, then configure t ...

  • Brocade Communications Systems 6650 - page 156

    138 Brocade ICX 6650 Administration Guide 53-1002600-01 Limiting the number of hops an IPv6 packet can traverse 5 If you att empt to add an entr y that already e xists in the neighbor discov er y cache, the sof tware changes the already existing entr y to a static entr y . T o remo ve a static IPv6 entry from the IPv6 neighbo r discovery cache, use ...

  • Brocade Communications Systems 6650 - page 157

    Brocade ICX 6650 Administration Guide 139 53-1002600-01 Clearing global IPv6 information 5 Clearing the IPv6 cache Y ou can remo ve all entries fr om the IPv6 cache or specify an entry based on the follo wing: • IPv6 prefix. • IPv6 address. • Interface type. For e xample, to remove entries f or IPv6 address 200 1:DB8::1, ent er the fo llowing ...

  • Brocade Communications Systems 6650 - page 158

    140 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying global IPv6 information 5 Clearing IPv6 routes fr om the IPv6 route table Y ou can clear all IPv6 r outes or only those rout es associated with a par ticular IPv6 prefix from the IPv6 ro ute table and reset the r outes. For e xample, to clear IPv6 route s associated with the prefix ...

  • Brocade Communications Systems 6650 - page 159

    Brocade ICX 6650 Administration Guide 141 53-1002600-01 Displaying global IPv6 information 5 Syntax: show ipv6 cache [ <index-number> | <ipv6-prefix> / <prefix-length> | <ipv6- address> | ethernet <stack-unit>/<slot>/<port> | ve <number > | t unnel <number> ] The <index-number> parameter r ...

  • Brocade Communications Systems 6650 - page 160

    142 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying global IPv6 information 5 Syntax: show ipv6 interface [ <interface> [ <stack-unit>/<slot>/<por t> | <number> ]] The <interface> paramet er displays detailed information for a specified int er face. For the inte r face, you can specify the Ethernet ...

  • Brocade Communications Systems 6650 - page 161

    Brocade ICX 6650 Administration Guide 143 53-1002600-01 Displaying global IPv6 information 5 This display sho w s the f ollowing information. TA B L E 3 0 Detailed IPv6 interface information fields Field Descripti on Interface/line pr otocol stat us The status of in ter face and line pr otocol. If y ou have di sabled the interface with the disabl e ...

  • Brocade Communications Systems 6650 - page 162

    144 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying global IPv6 information 5 Displaying IPv6 neighbor informati on Y ou c an di sp lay t he I Pv 6 n ei gh bo r t ab le , w h ic h c on ta in s a n e nt r y for ea ch IP v6 ne ig h bo r w it h w hi ch the rout er ex changes IPv6 packets. T o displa y the IPv6 neighbor table, ent er the ...

  • Brocade Communications Systems 6650 - page 163

    Brocade ICX 6650 Administration Guide 145 53-1002600-01 Displaying global IPv6 information 5 Displaying the IPv6 route table T o displa y the IPv6 ro ute table, ent er the follo wing command at any CLI le vel. Syntax: show ipv6 r oute [ <ipv6-address> | <ipv6-prefix> / <prefix-length > | bgp | connect | ospf | rip | static | summa ...

  • Brocade Communications Systems 6650 - page 164

    146 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying global IPv6 information 5 The static keyw ord restricts the displa y to entries f or static IPv6 r outes. The summar y keyw ord displays a summary of the prefixes and different r oute types. The following table lists the information displayed b y the show ipv6 r oute command. T o di ...

  • Brocade Communications Systems 6650 - page 165

    Brocade ICX 6650 Administration Guide 147 53-1002600-01 Displaying global IPv6 information 5 Syntax: show ipv6 rout er If y ou configure y our Br ocade devi ce to funct ion as an IPv6 r outer (you configure IPv6 addresses on its inter faces and enable IPv6 routing using the ipv6 unicast-routing command) and you enter the show ipv6 r outer command, ...

  • Brocade Communications Systems 6650 - page 166

    148 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying global IPv6 information 5 Syntax: show ipv6 tcp connections This display sho w s the f ollowing information. TA B L E 3 5 General IPv6 T CP connection fields Field Descripti on Local IP address:port The IPv4 or IPv6 address and port number of the local router int er face ov er which ...

  • Brocade Communications Systems 6650 - page 167

    Brocade ICX 6650 Administration Guide 149 53-1002600-01 Displaying global IPv6 information 5 T o displa y detailed information about a specifie d TCP connection, ent er a command such as the follo win g at any CLI lev el. Syntax: show ipv6 tcp status <local-ip-address> <local-port-number> <remot e-ip-address> <remote-por t-numb ...

  • Brocade Communications Systems 6650 - page 168

    150 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying global IPv6 information 5 This display sho w s the f ollowing information. TA B L E 3 6 Specific IPv6 T CP connection fields Field Descri ption TC P = <location> The location of the TCP . <local-ip-address> <loca l-por t-number> <remote-ip -address> <remot ...

  • Brocade Communications Systems 6650 - page 169

    Brocade ICX 6650 Administration Guide 151 53-1002600-01 Displaying global IPv6 information 5 Displaying IPv6 traffic statistics T o displa y IPv6 traf fic statistics, ente r the f ollowing c ommand at any CLI lev el. Syntax: show ipv6 traffic This show ipv6 traffic comm and displays the following inf ormation . Field Descri ption IPv6 statistics re ...

  • Brocade Communications Systems 6650 - page 170

    152 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying global IPv6 information 5 bad vers The number of IPv6 packets dropped b y the router because the v ersion number is not 6. bad scope The number of IPv6 packets dr opped by the rout er because of a bad address scope. bad options The number of IPv6 packe ts dropped by the r outer beca ...

  • Brocade Communications Systems 6650 - page 171

    Brocade ICX 6650 Administration Guide 153 53-1002600-01 Displaying global IPv6 information 5 mem red The number of Membership R eduction messages sent or r eceived by the r outer . rout er soli The number of Rout er Solicitation messages sent or receiv ed by the ro uter . rout er adv The number of Rou ter Advertisement messages sent or receiv ed by ...

  • Brocade Communications Systems 6650 - page 172

    154 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying global IPv6 information 5 input errors Th is information is used by Brocade T echn ical Suppor t. TC P s t at i s t i c s activ e opens The number of T CP connections opened by the r outer by sending a T CP SYN t o another de vice. passive opens The number of TCP connections opened ...

  • Brocade Communications Systems 6650 - page 173

    Brocade ICX 6650 Administration Guide 155 53-1002600-01 Chapter 6 SNMP Access In this chapter • SNMP ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 • SNMP community strings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 • User -based security mode ...

  • Brocade Communications Systems 6650 - page 174

    156 Brocade ICX 6650 Administration Guide 53-1002600-01 SNMP community strings 6 • “SNMP version 3 traps” • “Displaying SNMP Info rm ation” • “SNMP v3 configur ation exam pl es” Restricting SNMP access using A CL, VLAN, or a speci fic IP address constitute the first leve l of def ense when the packe t arrives at a Br ocade device. ...

  • Brocade Communications Systems 6650 - page 175

    Brocade ICX 6650 Administration Guide 157 53-1002600-01 SNMP community strings 6 NOTE If you issue a no snmp-ser ver community public ro command and then enter a write memory command to sa ve that configuration, the “public” com munity name is remove d and will have no SNMP access. If f or some reason the de vice is brought do wn and then broug ...

  • Brocade Communications Systems 6650 - page 176

    158 Brocade ICX 6650 Administration Guide 53-1002600-01 SNMP community strings 6 The command in this example associ ates the vi ew “sysview” t o t he community s tring named “myread”. The community string ha s read-only access t o “sysview”. F or information on ho w to create vie ws, refer to “SNMP v3 configuration examples” on page ...

  • Brocade Communications Systems 6650 - page 177

    Brocade ICX 6650 Administration Guide 159 53-1002600-01 User-based security model 6 User-based security model SNMP version 3 ( RFC 25 70 through 25 75) intr oduc es a User-Based Security model (RFC 25 7 4) for authentication and privacy services. SNMP version 1 and version 2 use community strings to authenticate SNMP access t o management modules. ...

  • Brocade Communications Systems 6650 - page 178

    160 Brocade ICX 6650 Administration Guide 53-1002600-01 User-based security model 6 See the section “Displa ying the Engine ID” on page 167 f or details. The default engine I D guarantees the uniqueness of the e ng ine ID for SN MP vers ion 3. If yo u wa nt to change the de fault engine ID, enter the snmp-ser ver engineid local command. Brocade ...

  • Brocade Communications Systems 6650 - page 179

    Brocade ICX 6650 Administration Guide 161 53-1002600-01 User-based security model 6 NOTE This command is not used for SNMP version 1 and SNMP version 2. In these version s, gr oups an d group vie ws are created int ernally using community strings. (refer t o “SNMP community strings” on page 156.) When a community string is created, tw o groups ...

  • Brocade Communications Systems 6650 - page 180

    162 Brocade ICX 6650 Administration Guide 53-1002600-01 User-based security model 6 The CLI for creating SNMP v ersion 3 users has been updat ed as follows. Syntax: [ no ] snmp-ser ver user <name> <groupname> v3 [[ access <standard-ACL -id> ] [[ encr ypted ] [ auth md5 <md5-passw ord> | sha <sha-passwor d> ] [ priv [ e ...

  • Brocade Communications Systems 6650 - page 181

    Brocade ICX 6650 Administration Guide 163 53-1002600-01 Defining SNMP views 6 • If AES is the priv acy prot ocol to be used, ente r aes follo wed by the AES password k ey . Fo r a small pa sswor d ke y , enter 12 charact ers. For a big passwor d key , ent er 16 characters. If y ou include the encrypted ke yword, ent er a password string containin ...

  • Brocade Communications Systems 6650 - page 182

    164 Brocade ICX 6650 Administration Guide 53-1002600-01 SNMP version 3 traps 6 Brocade(config)#snmp-server view admin 1.3.6.1.4.1.1991 included Y ou can ex clude por tions of the MIB wi thin an inclusion scope. For e xample, if you want t o exclude the snAgentSys objects, which begin with 1.3.6. 1.4.1 .1 99 1.1 . 1.2 object identi fier from the adm ...

  • Brocade Communications Systems 6650 - page 183

    Brocade ICX 6650 Administration Guide 165 53-1002600-01 SNMP version 3 traps 6 The <vie wstring> va ri a bl e is t he n am e o f t h e v ie w to which the SNMP group members ha ve access. If no view is specified, then the group has no access t o the MIB. Defining the UDP port for SNMP v3 traps The SNMP host command enhancemen ts allow configu ...

  • Brocade Communications Systems 6650 - page 184

    166 Brocade ICX 6650 Administration Guide 53-1002600-01 SNMP version 3 traps 6 Backward compatibility with SMIv1 trap format The Bro cade device will continue t o suppor t creation of traps in SMIv1 format, as bef ore. T o allow the device to send notifications in SMIv2 format , configure the dev ice as described abov e. The default mode is still t ...

  • Brocade Communications Systems 6650 - page 185

    Brocade ICX 6650 Administration Guide 167 53-1002600-01 Displaying SNMP Information 6 Viewing IPv6 SNMP server addresses Many of the e xisting show commands display IPv6 add resses for IPv6 SNMP servers. The f ollowing exa mpl e s how s o ut pu t fo r th e show snmp ser ver command. Displaying SNMP Information This section lists the commands for vi ...

  • Brocade Communications Systems 6650 - page 186

    168 Brocade ICX 6650 Administration Guide 53-1002600-01 Displaying SNMP Information 6 Displaying SNMP groups T o displa y the definition of an SNMP grou p, ent er a command such as the follo wing. Brocade#show snmp group groupname = exceptifgrp security model = v3 security level = authNoPriv ACL id = 2 readview = exceptif writeview = <none> S ...

  • Brocade Communications Systems 6650 - page 187

    Brocade ICX 6650 Administration Guide 169 53-1002600-01 SNMP v3 configuration examples 6 SNMP v3 configuration examples The follo wing sections present examples of ho w to configure SNMP v3. Simple SNMP v3 configuration Brocade(config)#snmp-s group admingrp v3 priv read all write all notify all Brocade(config)#snmp-s user adminuser admingrp v3 auth ...

  • Brocade Communications Systems 6650 - page 188

    170 Brocade ICX 6650 Administration Guide 53-1002600-01 SNMP v3 configuration examples 6 ...

  • Brocade Communications Systems 6650 - page 189

    Brocade ICX 6650 Administration Guide 171 53-1002600-01 Chapter 7 Foundry Discovery Protocol (FDP) and Cisco Discovery Protocol (CDP) Packets In this chapter • FDP Ove r view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 7 1 • CDP pack ets . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 6650 - page 190

    172 Brocade ICX 6650 Administration Guide 53-1002600-01 FDP Overview 7 FDP configuration The follo win g sections describe how t o enable Fo undr y Discov er y Prot ocol (FDP) and how to change the FDP update and ho ld timers. Enabling FDP globally T o enable a Br ocade ICX 6650 de vice to globally send FDP pack ets, ent er the follo wing command a ...

  • Brocade Communications Systems 6650 - page 191

    Brocade ICX 6650 Administration Guide 173 53-1002600-01 FDP Overview 7 T o change the FDP updat e timer , enter a co mmand su ch as the follo wing at the global CONFIG level of the CLI. Brocade(config)# fdp timer 120 Syntax: [ no ] fdp timer <secs> The <secs> parameter specifies the number of sec onds between updates and can be from 5 ? ...

  • Brocade Communications Systems 6650 - page 192

    174 Brocade ICX 6650 Administration Guide 53-1002600-01 FDP Overview 7 Syntax: show fdp neighbor [ ethernet <stac k-unit> / <slot> / <por t> ] [ detail ] The ethernet <stack-unit> / <slot> / <por t> parameter lists the inf ormatio n for updat es received on the specified ethernet int er face. Stack-unit is 1. The ...

  • Brocade Communications Systems 6650 - page 193

    Brocade ICX 6650 Administration Guide 175 53-1002600-01 FDP Overview 7 The show fdp neighbor detail command displays the f oll owing inf ormation. Displaying FDP entries T o displa y the detailed neighbor inf orm ation for a specific de vice, enter the show fdp entry <device-id> command. Syntax: show fdp entry * | <device-id> The * | &l ...

  • Brocade Communications Systems 6650 - page 194

    176 Brocade ICX 6650 Administration Guide 53-1002600-01 FDP Overview 7 Displaying FDP information for an interface T o displa y FDP information for a n interfac e, enter a command such as the f ollowing. This example sho ws information f or Ethernet por t 1/1/1. The por t sends FDP updates e ver y 5 seconds. Neighbors that receiv e the updates can ...

  • Brocade Communications Systems 6650 - page 195

    Brocade ICX 6650 Administration Guide 177 53-1002600-01 CDP packets 7 Clearing FDP and CDP statistics T o clear FDP and CDP statistic s, enter the fo llowing command. Brocade# clear fdp counters Syntax: clear fdp counters CDP packets Cisco Disco ver y Pro tocol (CDP) pack ets are used by Cisco devices t o advert ise themselv es to other Cisco de vi ...

  • Brocade Communications Systems 6650 - page 196

    178 Brocade ICX 6650 Administration Guide 53-1002600-01 CDP packets 7 Displaying CDP infor mation Y ou can displa y the following CDP information: • Cisco neighb ors • CDP entries for a ll Cisco neighbors or a specific neighbo r • CDP pack et statistics Displaying neighbors T o displa y the Cisco neighbors the Br ocade devi ce has learne d fr ...

  • Brocade Communications Systems 6650 - page 197

    Brocade ICX 6650 Administration Guide 179 53-1002600-01 CDP packets 7 Syntax: show fdp neighbors [ detail | ethernet <s tack-unit> / <slot> / <port> ] Specify the Ethernet por t in the <stack-unit>/<slot>/<por t> format. Stack -unit is 1. Displaying CDP entries T o displa y CDP entries f or all neighbors, enter t ...

  • Brocade Communications Systems 6650 - page 198

    180 Brocade ICX 6650 Administration Guide 53-1002600-01 CDP packets 7 Displaying CDP statistics T o displa y CDP pack et statistics, enter the show fdp traf fic command. Brocade# show fdp traffic CDP counters: Total packets output: 0, Input: 3 Hdr syntax: 0, Chksum error: 0, Encaps failed: 0 No memory: 0, Invalid packet: 0, Fragmented: 0 Syntax: sh ...

  • Brocade Communications Systems 6650 - page 199

    Brocade ICX 6650 Administration Guide 181 53-1002600-01 Chapter 8 LLDP and LLDP-MED In this chapter • LLDP terms used in this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 • LLDP ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 • LLDP-MED ov er view. ...

  • Brocade Communications Systems 6650 - page 200

    182 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP terms used in this chapter 8 This chapter describes ho w to configure the f ollowing pr otocols: Link lay er discovery prot ocol (LLDP) – The Lay er 2 network discov er y prot ocol described in the IEEE 802. 1A B standard, Station and Media Access Control Connectivity Discov er y . This ...

  • Brocade Communications Systems 6650 - page 201

    Brocade ICX 6650 Administration Guide 183 53-1002600-01 LLDP overview 8 Network connectivity device – A forwar ding 802 LAN de vice, such as a rout er , switch, or wireless access point. Station – A node in a networ k. TL V (T ype-Length-V alue) – An information element in an LLDPDU that describes the type of information being sent, the lengt ...

  • Brocade Communications Systems 6650 - page 202

    184 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED overview 8 Benefits of LLDP LLDP pro vides the fo llowing benefits: • Network Management: • Simplifies the use of and enhances the ability of network management tools in multi-vend or envir onments • Enables discov er y of accurate physical netw ork topologies such as which devi ...

  • Brocade Communications Systems 6650 - page 203

    Brocade ICX 6650 Administration Guide 185 53-1002600-01 LLDP-MED overview 8 FIGURE 12 LLDP-MED connectivity Benefits of LLDP-MED LLDP-MED pro vides the following benefits: • V endor-ind ependent management capabilities, en abling different IP te lephony systems to inter operate in one network. • Aut omatically deploys netw ork policies, such as ...

  • Brocade Communications Systems 6650 - page 204

    186 Brocade ICX 6650 Administration Guide 53-1002600-01 General LLDP operating principles 8 LLDP-MED class An LLDP-MED class specifies an Endpoint type and its capabilities. An Endpoint can belong to one of three LLDP-MED class types: • Class 1 (Generic endpoint) – A Class 1 Endpoint requires ba sic LLDP discovery ser vices, but does not suppor ...

  • Brocade Communications Systems 6650 - page 205

    Brocade ICX 6650 Administration Guide 187 53-1002600-01 General LLDP operating principles 8 An LLDP agent initiates the transmission of LLDP pa ckets whene ver the transmit countdown timing counter e xpires, or whenever LLDP information has c hanged. When a transm it cycle is initiated, the LLDP manager ex tracts the MIB objects and form ats this i ...

  • Brocade Communications Systems 6650 - page 206

    188 Brocade ICX 6650 Administration Guide 53-1002600-01 General LLDP operating principles 8 TLV support This section lists the LLDP and LLDP-MED TL V suppor t. LLDP TLVs There are tw o types of LLDP TL Vs, as specified in the IEEE 802.3AB standar d: • Basic management TL Vs consist of bo th optional general sy stem inf ormation TL Vs as w ell as ...

  • Brocade Communications Systems 6650 - page 207

    Brocade ICX 6650 Administration Guide 189 53-1002600-01 General LLDP operating principles 8 LLDP-MED TLVs Brocade de vices honor an d send the follo wing LLDP-MED TL Vs, as defined in the TIA-1 05 7 standard: • LLDP-MED capab ilities • Network policy • Location identification • Extended po wer- via-MDI Mandatory TLVs When an LLDP agent tran ...

  • Brocade Communications Systems 6650 - page 208

    190 Brocade ICX 6650 Administration Guide 53-1002600-01 General LLDP operating principles 8 There are sev eral ways in which a port may be identified, as shown in Figure 43 . A por t ID subtype, included in the TL V , indicates ho w the por t is being ref erenced in the Port ID field. Brocade ICX 6650 devices use port ID subtype 3, the permanent MA ...

  • Brocade Communications Systems 6650 - page 209

    Brocade ICX 6650 Administration Guide 191 53-1002600-01 MIB support 8 The TTL TL V format is shown below . FIGURE 1 5 TTL TL V pac ket format MIB support Brocade ICX 6650 devices support the followi ng standard management in formation base (MIB) modules: • LLDP-MIB • LLDP-EXT -DO T1-MIB • LLDP-EXT -DO T3-MIB • LLDP-EXT -MED-MIB Syslog messa ...

  • Brocade Communications Systems 6650 - page 210

    192 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP configuration 8 LLDP configuration This section describes how to enable and configure LLD P . Ta b l e 4 4 lists the LLDP global-level tasks and th e default beha vior/value f or each task. LLDP configuration notes and considerations • LLDP is suppor ted on Etherne t inter faces only . ...

  • Brocade Communications Systems 6650 - page 211

    Brocade ICX 6650 Administration Guide 193 53-1002600-01 LLDP configuration 8 Enabling and disabling LLDP LLDP is enabled by d efault on indi vidual por ts. How ever , t o run LL DP , you must first enable it on a global basis (on th e entire device). T o enable LLDP globally , enter the f ollowing co mmand at the global CONFIG level of th e CLI. Br ...

  • Brocade Communications Systems 6650 - page 212

    194 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP configuration 8 Brocade(config)#lldp enable ports e 1/2/1 Syntax: [ no ] lldp enab le por ts ethern et <s tack-unit> / <slot> / <por t> | all Use the [no] f orm of the command to disable the re ceip t and transmission of LLDP packets on a por t. Specify the ethernet port ...

  • Brocade Communications Systems 6650 - page 213

    Brocade ICX 6650 Administration Guide 195 53-1002600-01 LLDP configuration 8 Brocade(config)#no lldp enable receive ports e 1/1/1 e 1/1/2 e 1/1/3 The abo ve command changes the LLDP operating mo de on por ts 1/1/1 , 1/1/2, and 1/1/3 fr om transmit and receive mode to transmit only mode. An y incoming LLDP pack ets will be dr opped in soft ware. T o ...

  • Brocade Communications Systems 6650 - page 214

    196 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP configuration 8 Use the sho w lldp com mand to view t he configuratio n. Specifying the maximum numb er of LLDP neighbors per port Y ou can change the maximum number of LLDP neig hbors for which LLDP data will be retained f or each port. By default, the ma ximum number is f our and you ca ...

  • Brocade Communications Systems 6650 - page 215

    Brocade ICX 6650 Administration Guide 197 53-1002600-01 LLDP configuration 8 Specifying the mini mum time between SNMP traps and Syslog messages When SNMP notifications and Syslog messages for LLDP are enabled, the d evice will send no more than one SNMP notifi cation and corresponding Syslog message with in a five second period. If desired, you ca ...

  • Brocade Communications Systems 6650 - page 216

    198 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP configuration 8 Changing the interval between regular LLDP transmissions The LLDP transmit interval specifies the nu mber of seconds between re gular LLDP packet transmissions. When you enable LLDP , by def ault, the device will wait 30 seconds betw een regular LLDP packe t transmissions. ...

  • Brocade Communications Systems 6650 - page 217

    Brocade ICX 6650 Administration Guide 199 53-1002600-01 LLDP configuration 8 Changing the minimum time between port reinitializations The LLDP re-in itialization dela y timer specifies the m inimum number of seconds the de vice will w ait from when LLDP is disabled on a por t, until it will honor a request t o re-ena ble LLDP on that por t. When yo ...

  • Brocade Communications Systems 6650 - page 218

    200 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP configuration 8 • Management address • Por t des cr ipt ion • System capabilities • System description (not a utomatically adver tised) • System name Management Address A management address is normally an IPv4 or IPv6 address that can be used to manage the devic e. Management ad ...

  • Brocade Communications Systems 6650 - page 219

    Brocade ICX 6650 Administration Guide 201 53-1002600-01 LLDP configuration 8 The <ipv4 address> or <ipv6 address> or both variables are the add resses that may be used t o reach higher la yer entities to assist disco ver y by n etwork manageme nt. In addition to man agement addresses, the adv er tisement will include the system interfac ...

  • Brocade Communications Systems 6650 - page 220

    202 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP configuration 8 System capabilities f or Brocade de vices are based on the type of sof tware image in use (e.g., Lay er 2 switch or La yer 3 rout er). The enabled capabilities will be the same as the available capabilities, ex cept that when using a rout er image (base or fu ll Layer 3), ...

  • Brocade Communications Systems 6650 - page 221

    Brocade ICX 6650 Administration Guide 203 53-1002600-01 LLDP configuration 8 Y ou can list all of the por ts individually , use the ke yword to to spe cify ranges of por ts, or a combination of both. T o apply the configuratio n to all por ts on the device, use the k eywor d all instead of listing the por ts individu ally . Note that using the keyw ...

  • Brocade Communications Systems 6650 - page 222

    204 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP configuration 8 Syntax: [ no ] lldp adv er tise vlan-name v lan <vlan ID> por ts ethernet <stack -unit> / <slot> / <por t> | all For <vlan ID> , enter the VLAN ID to adv er tise. Specify the ethernet por t in the <stack-unit>/<slot>/<port> f ...

  • Brocade Communications Systems 6650 - page 223

    Brocade ICX 6650 Administration Guide 205 53-1002600-01 LLDP configuration 8 • Whether the link is currently aggregat ed • The primar y trunk por t Brocade de vices adver tise link ag gregation info rmation abou t standa rd link aggregation (LACP) as well as static tr unk configur ation. By default, link-aggregation inf ormation is automa tical ...

  • Brocade Communications Systems 6650 - page 224

    206 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED configuration 8 Syntax: [ no ] lldp adver tise mac-phy-conf ig-status por ts ethernet <stack -unit> / <slot> / <por t> | all Specify the ethernet por t in the <stack-unit>/<slot>/<port> format. Stack- unit is 1. Y ou can list all of the por ts indiv ...

  • Brocade Communications Systems 6650 - page 225

    Brocade ICX 6650 Administration Guide 207 53-1002600-01 LLDP-MED configu ration 8 Ta b l e 4 5 lists the global and inter face-le vel tasks and the def ault behavior/value f or each task. Enabling LLDP-MED When LLDP is enabled globally , LL DP-MED is enabled if the LLDP -MED capabilities T L V is also enabled. By default, the LLDP-MED capabilities ...

  • Brocade Communications Systems 6650 - page 226

    208 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED configuration 8 Brocade(config)#lldp enable snmp med-topo-change-notifications ports e 1/1/1 to 1/1/5 Syntax: no lldp enable snmp med-topo -change-notifications por ts ethernet <stack-unit> / <s lot> / <por t> | all Specify the ethernet por t in the <stack-unit> ...

  • Brocade Communications Systems 6650 - page 227

    Brocade ICX 6650 Administration Guide 209 53-1002600-01 LLDP-MED configu ration 8 Defining a location id The LLDP-MED Location Identification e xtension enables the Brocade ICX 6650 device t o s et the physical location that an attached Class III Endpoint will use f or location-bas ed applications. This fe a ture is importan t f or application s su ...

  • Brocade Communications Systems 6650 - page 228

    210 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED configuration 8 altitude floors <number> is the ve r tical elev ation of a building abov e the gr ound, where 0 represents the floor level associat ed with the ground lev el at the main entrance and larger values represent floor s that are above (hig her in altitude) floors with ...

  • Brocade Communications Systems 6650 - page 229

    Brocade ICX 6650 Administration Guide 211 53-1002600-01 LLDP-MED configu ration 8 Configuring civic address location When you configure a media Endpoint location us ing the address-based location, you specify the location the entry refers t o, the countr y code, and the ele ments that descri be the civic or postal address. T o configure a civic add ...

  • Brocade Communications Systems 6650 - page 230

    212 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED configuration 8 TA B L E 4 6 Elements used with civic addr ess Civic Address (CA) type Description Acceptable values / examples 0 Language The ISO 639 language code used f or presenting the address info rmation. 1 National subd ivisions (st ate, canton, regi on, province , or pref ect ...

  • Brocade Communications Systems 6650 - page 231

    Brocade ICX 6650 Administration Guide 213 53-1002600-01 LLDP-MED configu ration 8 20 House number suffix A modifier to the h ouse number . It does no t include parts of the house number . Example: A, 1/2 2 1 Landmark or vanit y address A string name f or a location. It conve ys a common local designation of a structure, a group of buil dings, or a ...

  • Brocade Communications Systems 6650 - page 232

    214 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED configuration 8 Example civic address lo cation advertisement The Civic address lo cation adver tisemen t will appear similar to the following on the remote device, and in the CLI displa y output on the Brocade de vice (show lldp local-info) . Configuring emergen cy call service The E ...

  • Brocade Communications Systems 6650 - page 233

    Brocade ICX 6650 Administration Guide 215 53-1002600-01 LLDP-MED configu ration 8 Specify the ethernet por t in the <stack-unit>/<slot>/<port> format. Stack- unit is 1. Y ou can list all of the por ts individually , use the ke yword to to spe cify ranges of por ts, or a combination of both. T o apply the configuratio n to all por ...

  • Brocade Communications Systems 6650 - page 234

    216 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED configuration 8 For tagged traffic Syntax: [ no ] lldp med network - policy application <application type> tagged vlan <vlan ID> priority <0 – 7> dscp <0 – 63> por ts ethernet <stack-unit> / <slot> / <port> | all For untagged traffic Synta ...

  • Brocade Communications Systems 6650 - page 235

    Brocade ICX 6650 Administration Guide 217 53-1002600-01 LLDP-MED attributes advertised by the Brocade devic e 8 • priority <0 –7> indicates the La yer 2 priority value t o be used for the specified application type. Enter 0 t o use the default priority . • dscp <0 – 63> specifies the La yer 3 Differentiate d Ser vice codepoint p ...

  • Brocade Communications Systems 6650 - page 236

    218 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED attributes advertised by the Brocade device 8 Brocade(config)#lldp advertise med-capabilities ports e 1/1/1 to 1/1/5 The LLDP-MED capabilities adv er tisement will appear similar to the f ollowing on the remote de vice, and in the CLI displa y output on the Brocade de vice ( show lldp ...

  • Brocade Communications Systems 6650 - page 237

    Brocade ICX 6650 Administration Guide 219 53-1002600-01 LLDP-MED attributes advertised by the Brocade devic e 8 Syntax: show lldp The follo wing table describes the information displa yed by the show lldp statistics command . Displaying LLDP statistics The show lldp statistics command displays an overview of LL DP neighbor de tection on the de vice ...

  • Brocade Communications Systems 6650 - page 238

    220 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED attributes advertised by the Brocade device 8 Syntax: show lldp statistics NOTE Y ou can reset LLDP statisti cs using the CLI command clear LLDP statistics . Ref er to “Resetting LLDP statistics” on page 223. The follo wing table describes the information displa yed by the show ll ...

  • Brocade Communications Systems 6650 - page 239

    Brocade ICX 6650 Administration Guide 221 53-1002600-01 LLDP-MED attributes advertised by the Brocade devic e 8 Displaying LLDP neighbors The show lldp neighbors command displays a list of the current LLDP neighbors per port. The follo wing shows an exam ple repor t. Syntax: show lldp neighbors The follo wing table describes the information displa ...

  • Brocade Communications Systems 6650 - page 240

    222 Brocade ICX 6650 Administration Guide 53-1002600-01 LLDP-MED attributes advertised by the Brocade device 8 Displaying LLDP neighbors detail The show lldp neighbors detail command displays the LLDP adv er tisements received fr om LLDP neighbors. The follo wing shows an exam ple show lldp neighbors detail por ts ethernet 1/1/1 report. NOTE The sh ...

  • Brocade Communications Systems 6650 - page 241

    Brocade ICX 6650 Administration Guide 223 53-1002600-01 Resetting LLDP statistics 8 NOTE The show lldp local-info output will vary based on LLDP configuration settings. The follo wing shows an exam ple repor t. Brocade#show lldp local-info ports ethernet 1/1/1 Local port: 1/1/1 + Chassis ID (MAC address): 748e.f80c.5f40 + Port ID (MAC address): 748 ...

  • Brocade Communications Systems 6650 - page 242

    224 Brocade ICX 6650 Administration Guide 53-1002600-01 Clearing cached LLDP neighbor information 8 Y ou can list all of the por ts individually , use the ke yword to to spe cify ranges of por ts, or a combination of both. T o apply the configuratio n to all por ts on the device, use the k eywor d all instead of listing the por ts individually . Cl ...

  • Brocade Communications Systems 6650 - page 243

    Brocade ICX 6650 Administration Guide 225 53-1002600-01 Chapter 9 Hardware Component Monitoring In this chapter • Digital optical monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 Ta b l e 47 lists the Brocade ICX 6650 switch and the hardware monit oring features the switch suppor ts. These f eatures are ...

  • Brocade Communications Systems 6650 - page 244

    226 Brocade ICX 6650 Administration Guide 53-1002600-01 Digital optical monitoring 9 Setting the alarm interval Y ou can option ally change the interval between which alarms and w arning messages are sent. The default int er val is three minutes. T o ch ange the int er val, use the f ollowing command. Brocade(config)#interface ethernet 1/1/1 to 1/1 ...

  • Brocade Communications Systems 6650 - page 245

    Brocade ICX 6650 Administration Guide 227 53-1002600-01 Digital optical monitoring 9 Port 1/1/30: Type : EMPTY Port 1/1/31: Type : EMPTY Port 1/1/32: Type : EMPTY Port 1/1/33: Type : EMPTY Port 1/1/34: Type : EMPTY Port 1/1/35: Type : EMPTY Port 1/1/36: Type : EMPTY Port 1/1/37: Type : EMPTY Port 1/1/38: Type : EMPTY Port 1/1/39: Type : 10GE Twinax ...

  • Brocade Communications Systems 6650 - page 246

    228 Brocade ICX 6650 Administration Guide 53-1002600-01 Digital optical monitoring 9 Vendor: BROCADE Version: A Part# : 57-0000075-01 Serial#: AAF209450000A9K Port 1/1/10: Type : 10GE LR 10km (SFP +) Vendor: BROCADE Version: A Part# : 57-0000076-01 Serial#: ADF209100000D4P Port 1/1/11: Type : 1G M-SX(SFP) Vendor : Brocade Version: Part# : AFBR-5715 ...

  • Brocade Communications Systems 6650 - page 247

    Brocade ICX 6650 Administration Guide 229 53-1002600-01 Digital optical monitoring 9 NOTE The show optic function tak es advantage of inf ormation st ored and supplied b y the manufacturer of the SFP , SFP+, and QSFP+ transceiv er . This informat ion is an optional feat ure of t he Multi-Source Agreement standard defining the optical int er face. N ...

  • Brocade Communications Systems 6650 - page 248

    230 Brocade ICX 6650 Administration Guide 53-1002600-01 Digital optical monitoring 9 Syntax: show optic threshold <stack-unit> / <slot> / <port> Specify the ethernet por t in the <stack-unit>/<slot>/<port> format. Stack- unit is 1. For T emperature, Supply V oltage, TX Bias, TX Pow er , and RX Pow er , values are ...

  • Brocade Communications Systems 6650 - page 249

    Brocade ICX 6650 Administration Guide 231 53-1002600-01 Chapter 10 Syslog In this chapter • About Syslog messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 • Displaying Syslog messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 • Syslog service configuration . . . . ...

  • Brocade Communications Systems 6650 - page 250

    232 Brocade ICX 6650 Administration Guide 53-1002600-01 About Syslog messages 10 About Syslog messages Brocade software can write syslog messages t o provide inf ormation at th e following se verity levels: • Emergencies • Aler ts • Critical • Errors • War n i ng s • Notifications • Informational • Debugging The device writ es the m ...

  • Brocade Communications Systems 6650 - page 251

    Brocade ICX 6650 Administration Guide 233 53-1002600-01 Displaying Syslog messages 10 Dynamic Log Buffer (50 entries): Dec 15 18:46:17:I:Interface ethernet 4, state up Dec 15 18:45:21:I:Bridge topology change, vlan 4095, interface 4, changed state to forwarding Dec 15 18:45:15:I:Warm start For inf ormation about the Sys log configuration informatio ...

  • Brocade Communications Systems 6650 - page 252

    234 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog service configurat ion 10 Displaying real-time Syslog messages Any t erminal logged on to a Br ocade switch ca n receive real-time Syslog messages when the ter m i na l m o n ito r command is issued. Syslog service configuration The procedures in this section describe how t o per form t ...

  • Brocade Communications Systems 6650 - page 253

    Brocade ICX 6650 Administration Guide 235 53-1002600-01 Syslog service configuration 10 Static and dynamic buffers T he s oft w ar e pr o v id e s t w o bu ff e rs : • Static – logs pow er supply failures, fan f a ilures, and temp erature warning or shutdown messages • Dynamic – logs all other mes sage types In the static log, ne w messages ...

  • Brocade Communications Systems 6650 - page 254

    236 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog service configurat ion 10 Notice that the static buf fer co ntains two sepa rate messages f or fan failures. Each message of each type has its own buf fer . Thus, if you replace fa n 1 but for some reason th at fan also fails, the soft ware replaces the first message about the failure o ...

  • Brocade Communications Systems 6650 - page 255

    Brocade ICX 6650 Administration Guide 237 53-1002600-01 Syslog service configuration 10 • If you ha ve not set the time and date on the onboar d system clock, the time stamp shows the amount of time that has passed since the de vice was boo ted, in the f ollowing format. <num> d <num> h <num> m <num> s where • <num> ...

  • Brocade Communications Systems 6650 - page 256

    238 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog service configurat ion 10 Disabling or re-enabling Syslog Syslog is enabled by default . T o disable it, e n t er the logging on command at the global CONFIG lev el . Brocade(config)#no logging on Syntax: [ no ] logging on [ <udp-port> ] The <udp-por t> parameter specifies t ...

  • Brocade Communications Systems 6650 - page 257

    Brocade ICX 6650 Administration Guide 239 53-1002600-01 Syslog service configuration 10 Specifying an additional Syslog server T o sp ecify an additional Syslog ser ver , ent er the logging host <ip-addr > command again. Y ou can specify up to six Syslog ser vers. Brocade(config)#logging host 10.0.0.99 Syntax: logging host <ip-addr> | & ...

  • Brocade Communications Systems 6650 - page 258

    240 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog service configurat ion 10 For La yer 2 switches, y ou can set the Syslog buf fer limit from 1 – 1 00 entries. For La yer 3 switches, you can set the Syslog buff er limit from 1 – 1 000 entries. Local buffer configuration notes • Y ou must sa ve the configuration and reload th e so ...

  • Brocade Communications Systems 6650 - page 259

    Brocade ICX 6650 Administration Guide 241 53-1002600-01 Syslog service configuration 10 • local3 – reser ved f or local use • local4 – reser ved f or local use • local5 – reser ved f or local use • local6 – reser ved f or local use • local7 – reser ved f or local use Displaying interface names in Syslog messages By default, an i ...

  • Brocade Communications Systems 6650 - page 260

    242 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog service configurat ion 10 Brocade(config)#ip show-service-number-in-log Syntax: [ no ] ip show-ser vice-number -in-log Retaining Syslog messages after a soft reboot Y ou ca n configure the de vice to sa ve the Sy stem log (Syslog) af ter a soft reboot ( reload command). Syslog reboot co ...

  • Brocade Communications Systems 6650 - page 261

    Brocade ICX 6650 Administration Guide 243 53-1002600-01 Chapter 11 Network Monitoring In this chapter • Basic syste m management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 43 • RMON suppor t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 • sFlow. . . . . . ...

  • Brocade Communications Systems 6650 - page 262

    244 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic system managemen t 11 The follo wing hardware details are list ed in the output of the show version co mmand: • Chassis type • PROM type (if applicable) • Chassis serial number • Management and int er f ace module serial numbers and ASIC types For a description of the sof tware d ...

  • Brocade Communications Systems 6650 - page 263

    Brocade ICX 6650 Administration Guide 245 53-1002600-01 Basic system management 11 Brocade#show ? Syntax: show <option> Y ou also can ent er “show” at the command prom pt, then press the T AB k ey . Viewing port statistics Port statistics are polled by def ault every 1 0 seconds. Y ou can vie w statistics f or por ts by entering the f oll ...

  • Brocade Communications Systems 6650 - page 264

    246 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic system managemen t 11 State T he S TP state. Dupl The mode (full-duple x or half-duplex). Speed The port speed (10M, 1 00M, or 1 000M). T runk The trunk group number, if the por t is a mem ber of a tru nk group. T ag Whe ther the p or t is a tag ged member o f a VLAN. Priori The QoS forw ...

  • Brocade Communications Systems 6650 - page 265

    Brocade ICX 6650 Administration Guide 247 53-1002600-01 Basic system management 11 Viewing STP statistics Y ou can view a summary of STP statistics fo r Laye r 2 Switches and La yer 3 Switches. S TP statistics are by def ault polled ev er y 10 seconds. T o vie w spanning tree sta tistics, enter the show span command. T o vie w STP statistics for a ...

  • Brocade Communications Systems 6650 - page 266

    248 Brocade ICX 6650 Administration Guide 53-1002600-01 Basic system managemen t 11 Clearing statistics Y ou can clear statistics f or many paramet ers using the clear command. T o det ermine the available clear commands for the syst em, enter the clear command at the Privileged EXEC le vel of the CLI. Brocade#clear ? Syntax: clear <option> Y ...

  • Brocade Communications Systems 6650 - page 267

    Brocade ICX 6650 Administration Guide 249 53-1002600-01 Basic system management 11 Viewing egress queue counters The show int er face command displays the number of packets on a port that were queued f or each QoS priority (traff ic class) an d dropped bec ause of congestion. NOTE These counters do no t include traf fic on management ports or for a ...

  • Brocade Communications Systems 6650 - page 268

    250 Brocade ICX 6650 Administration Guide 53-1002600-01 RMON support 11 Clearing the egress queue counters Y ou can clear egress queue statistics (reset them to zer o), using the clear statistics and clear statistics ethernet < por t > command. Syntax: clear statistics [ ethernet <s tack-unit> / <slot> / <port> ] Specify the ...

  • Brocade Communications Systems 6650 - page 269

    Brocade ICX 6650 Administration Guide 251 53-1002600-01 RMON su pport 11 Statistics (RMON group 1) Count inf ormation on multicas t and br oa dcast packets, to tal packets sent, under sized and ov er sized packets, CRC alignment errors, jabbers, collision, fragments and dropped e vents is collecte d f or each por t on a Brocad e Layer 2 Switch or L ...

  • Brocade Communications Systems 6650 - page 270

    252 Brocade ICX 6650 Administration Guide 53-1002600-01 RMON support 11 CRC alignment err ors The to tal number of packets receiv ed that were from 64 – 15 18 octets long, but ha d either a bad FCS with an integral number of octets (FCS Error) or a bad FCS with a non-int egral number of octets (Alig nment Error). The packet length d oes not inclu ...

  • Brocade Communications Systems 6650 - page 271

    Brocade ICX 6650 Administration Guide 253 53-1002600-01 RMON su pport 11 History (RMON group 2) All active por ts by default will generat e two hist ory control data entries per ac tive Brocade La yer 2 Switch por t or Lay er 3 Switch inter face. An active port is defined as one w ith a link up. If the lin k goes down the two entries are automatica ...

  • Brocade Communications Systems 6650 - page 272

    254 Brocade ICX 6650 Administration Guide 53-1002600-01 sFlow 11 The ev ent control table defines the action t o be tak en when an alarm is reported. Defined e vents can be fo und by ent ering the CLI command, show e vent. The Ev ent Log T able collects and st ores repor ted e vents f or retrieval by an RMON application. A sample entr y and syntax ...

  • Brocade Communications Systems 6650 - page 273

    Brocade ICX 6650 Administration Guide 255 53-1002600-01 sFlow 11 sFlow version 5 is backwar d-compatible with sFl ow v ersion 2. By default, the sFlow agent e xpor ts sFlow version 5 flow samples b y default, but you can configure the de vice to export the data in sFlow v ersion 2 format. Y ou can switch between sFlow v ersion 2 and sFlow version 5 ...

  • Brocade Communications Systems 6650 - page 274

    256 Brocade ICX 6650 Administration Guide 53-1002600-01 sFlow 11 IPv6 packet sampling IPv6 sampling is pe r formed b y the packet pr ocesso r . The syst em uses the sampling rate setting t o selectively mark the m onitoring bit in the header of an incom ing packet. Mark ed packets t ell the CPU that the packe t s are subject to sFlo w sampling. sFl ...

  • Brocade Communications Systems 6650 - page 275

    Brocade ICX 6650 Administration Guide 257 53-1002600-01 sFlow 11 NOTE The device uses the router I D only if the device also has an IP interface with the same address. Rout er ID is not supported on IPv6 de vices. NOTE If an IP address is not already configured when y ou enable sFlow , the feature uses the source address 0.0.0.0. T o display the ag ...

  • Brocade Communications Systems 6650 - page 276

    258 Brocade ICX 6650 Administration Guide 53-1002600-01 sFlow 11 NOTE If you change the router I D or other IP address value that sFlow use s for its agent_address, y ou need to disable and then re-enable sFlow to cause the feature t o use the new source address. Specifying the collector sFlow e xpor ts traf fic statistics to an e xternal collect o ...

  • Brocade Communications Systems 6650 - page 277

    Brocade ICX 6650 Administration Guide 259 53-1002600-01 sFlow 11 Specifying an sFlow collector on IPv6 devices T o specify an sFlow collector on an IPv6 de vice, enter a command such as the f ollowing. Brocade(config)#sflow destination ipv6 2001:DB8:0::0b:02a This command specifies a collector with IPv6 address 200 1:DB8:0::0b: 02a, listening f or ...

  • Brocade Communications Systems 6650 - page 278

    260 Brocade ICX 6650 Administration Guide 53-1002600-01 sFlow 11 Configuration cons iderations The sampling rate is a fraction in the form 1/ N, meaning that, on average, one out of e very N pack ets will be sampled. The sflow sample command at the global le vel or por t lev el specif ies N, the denominator of the fraction. Thus a high er number fo ...

  • Brocade Communications Systems 6650 - page 279

    Brocade ICX 6650 Administration Guide 261 53-1002600-01 sFlow 11 W h e n y o u e n a b l e s F lo w o n a p or t , t h e p o r t 's sa m p l in g r at e i s s e t t o t h e g l o b a l d e f a u l t sa mp l i n g r a t e . This also applies to ports on wh ich you disable and then re-enable sFlo w. The port does not retain the sampling rat e it ...

  • Brocade Communications Systems 6650 - page 280

    262 Brocade ICX 6650 Administration Guide 53-1002600-01 sFlow 11 T o change the sampling rat e on an individual po r t, enter a command such as the f ollowing at the configuration level f or the por t. Brocade(config-if-1/1)#sflow sample 8192 Syntax: [ no ] sflow sample <num> The <num> parameter specifies the a verage number of packets ...

  • Brocade Communications Systems 6650 - page 281

    Brocade ICX 6650 Administration Guide 263 53-1002600-01 sFlow 11 Changing the sFlow source port By default, sFlow sends data to the co llector usin g UDP sour ce por t 8888, but you can change the source UDP port to an y por t number in the range 1 025-65535. T o change the source UD P por t, ente r a command such as the follo wing: Brocade(config) ...

  • Brocade Communications Systems 6650 - page 282

    264 Brocade ICX 6650 Administration Guide 53-1002600-01 sFlow 11 Brocade(config)#sflow enable Brocade(config)#interface ethernet 1/1/1 to 1/1/4 Brocade(config-mif-1/1/1-1/1/4)#sflow forwarding These comma nds globally enable sFlow , then ena ble sFlow f or warding on Ethernet por t s 1/1/1 – 1/1/4. Y ou must use both the sflo w enable and sflow f ...

  • Brocade Communications Systems 6650 - page 283

    Brocade ICX 6650 Administration Guide 265 53-1002600-01 sFlow 11 Egress interface ID for sample d broadcast and multicast packets For br oadcast and multicast traf fic, the egress int er face I D for s ampled traffic is alway s 0x80000000. When broadcast and multicast pack ets are sampled, the y are usually f or warded to more than one port. Howev ...

  • Brocade Communications Systems 6650 - page 284

    266 Brocade ICX 6650 Administration Guide 53-1002600-01 sFlow 11 Syntax: [ no ] sflow v er sion 2 | 5 The default is 5. Specifying the maxim u m flo w sample size With sFlo w versio n 5, you can specify the maxi mu m size of the flow sample sent to the sFlow collector . If a packet is larger than the specif ied maximu m size, then only the contents ...

  • Brocade Communications Systems 6650 - page 285

    Brocade ICX 6650 Administration Guide 267 53-1002600-01 sFlow 11 Exporting CPU-directed data (managemen t traffic) to the sFlow collector Y ou can select which and how of ten data destine d to the CPU (f or example, T eln et sessions) is sent to the sFlo w collector . CLI commands allow you to do the f ollowing: • Enable the sFlow agent t o expor ...

  • Brocade Communications Systems 6650 - page 286

    268 Brocade ICX 6650 Administration Guide 53-1002600-01 sFlow 11 Syntax: show sflow The show sflo w command displays the follo wing information. TA B L E 5 6 sFlow inf orm ation Parameter Definition sFlow v ersion Th e version of sFlow enabled on the de vice, which can be one of the fol l ow in g : • 2 • 5 sFlow services The f eature state, whi ...

  • Brocade Communications Systems 6650 - page 287

    Brocade ICX 6650 Administration Guide 269 53-1002600-01 sFlow 11 Clearing sFlow statistics T o clear the UDP pack et and sF low sample co unters in the s how sflo w display , enter the f ollowing command. Brocade#clear statistics Syntax: clear statistics This command clears the values in the follo wing fields of the show sflow display: • UDP pack ...

  • Brocade Communications Systems 6650 - page 288

    270 Brocade ICX 6650 Administration Guide 53-1002600-01 Utilization list fo r an uplink port 11 Utilization list for an uplink port Y ou can configure uplink utilization lists that display the per centage of a gi ven uplink port bandwidth that is used b y a specific list of do wnlink por ts. The percentages are based on 30-second inte r vals of RMO ...

  • Brocade Communications Systems 6650 - page 289

    Brocade ICX 6650 Administration Guide 271 53-1002600-01 Utilization list for an uplink port 11 Displaying utilization percentages for an uplink Af ter you configure an uplink utilizat ion list, you can display the list to obser ve the percentage of the uplink bandwidth that each of the do wnlink por ts used during the most recent 30-second port sta ...

  • Brocade Communications Systems 6650 - page 290

    272 Brocade ICX 6650 Administration Guide 53-1002600-01 Utilization list fo r an uplink port 11 ...

  • Brocade Communications Systems 6650 - page 291

    Brocade ICX 6650 Administration Guide 273 53-1002600-01 Appendix A Syslog messages Ta b l e 5 7 lists all of the Syslog messages. Note that some of the mess ages apply only to Lay er 3 Switches. NOTE This chapter does not list Syslog messages that can be display ed when a debug option is enabled. The messages are list ed by message le vel, in the f ...

  • Brocade Communications Systems 6650 - page 292

    274 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Alert MA C Authenticati on failed for <mac-a ddress> on <portnum> (No VLAN Info received from RADI US ser ver) RADIUS authenti cation was succ essful for the specified <mac-address> on the specified <portnum> ; howe ver , dynamic VLAN assignme nt was e ...

  • Brocade Communications Systems 6650 - page 293

    Brocade ICX 6650 Administration Guide 275 53-1002600-01 Syslog messages A Alert P ower supp ly <num>, <location> , failed A power sup ply has failed. The <num> is the pow er supply number . The <location> describes where th e failed power supply is in the ch assis. Aler t System: Modul e in slot <slot-num> encountered ...

  • Brocade Communications Systems 6650 - page 294

    276 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Alert T emperature <degrees> C degrees, w arning lev el <warn-degrees> C degrees, shutdown lev el <shutdown-degrees> C degrees In di ca tes an ove r te mp er at ur e c on di ti on on the activ e module. The <degrees> value indicat es the tem perature o ...

  • Brocade Communications Systems 6650 - page 295

    Brocade ICX 6650 Administration Guide 277 53-1002600-01 Syslog messages A Inf ormational Security: Password has been changed for user <username> from <session-id> Passwor d of the specified user has been changed during t he specified session ID or type. <session-id> can be console , telnet, ssh, web, or snmp . Informational <de ...

  • Brocade Communications Systems 6650 - page 296

    278 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Infor m ational Bridge topology change, vlan <vla n-id> , interface <portnum> , changed state t o <stp-state> A Spanni ng T ree Protocol (STP) topology change has occurred on a port. The <vlan- id> i s t he ID of th e V LA N in wh ic h the STP topology ...

  • Brocade Communications Systems 6650 - page 297

    Brocade ICX 6650 Administration Guide 279 53-1002600-01 Syslog messages A Informational D OT1X : por t <por tnum> - mac <mac address> This de vice doesn't support ACL with MA C Filtering on the same port The RADIUS server return ed a MAC address filter wh ile an IP A CL was applied t o the port, or returned an IP A CL while a MA C ...

  • Brocade Communications Systems 6650 - page 298

    280 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Inf ormational Inter face <por tnum> , state down A por t has gone down. The <portnum> is the port number . Inf ormational Inter face <por tnum> , state up A po rt has come up. The <portnum> is the port number . Informational M AC Based Vlan Disabled o ...

  • Brocade Communications Systems 6650 - page 299

    Brocade ICX 6650 Administration Guide 281 53-1002600-01 Syslog messages A Inf ormational SNMP Auth . failure, intruder IP: <ip-addr> A user has tried t o open a management session with the device using an i nvalid SNMP community string. The <ip-addr> is the IP addr ess of the host that sent the in valid community string. Inf ormational ...

  • Brocade Communications Systems 6650 - page 300

    282 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Infor m ational System: Static Mac entry with Mac Address <mac-a ddress> is added fr om the <unit> / <slot> / <port> to <unit> / <slot> / <port> on VLA Ns <vlan-id> to <vlan-i d> A MAC address is added to a range of interf ...

  • Brocade Communications Systems 6650 - page 301

    Brocade ICX 6650 Administration Guide 283 53-1002600-01 Syslog messages A Inf ormational Warm start The system software (flash co de) has been reloaded. Inf ormational vlan <vlan-id> Bridge is R ootBridge <mac-a ddress> (MgmtPriChg) 802. 1W changed the curr ent bridge to be the root bridge o f the given topol ogy due to administrative c ...

  • Brocade Communications Systems 6650 - page 302

    284 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Notification A CL system fragment pack et inspect rate <rat e> e xceeded The fragment rate allo wed on the device has been e xceeded. The <rate> indicat es the maximum rate allow ed. This message can occur if fragment thottling is en abled. Notification Authentica ...

  • Brocade Communications Systems 6650 - page 303

    Brocade ICX 6650 Administration Guide 285 53-1002600-01 Syslog messages A Notification Local T CP ex ceeds <burst-max> burst packets , stopping f or <lockup> seconds!! The number of TCP S YN packets e xceeds the <burst-max> thresh old set by the ip tcp burst command. The Product Name device may be the victim of a TCP S YN DoS atta ...

  • Brocade Communications Systems 6650 - page 304

    286 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Notification OSPF intf authe n failure, rid <router -id> , intf addr <ip-addr> , pkt src addr <src-ip-addr> , error type <error-type> , pkt type <pkt-type> Indicat es that an OSPF inter face authen tication fa ilure has occurre d. The <router ...

  • Brocade Communications Systems 6650 - page 305

    Brocade ICX 6650 Administration Guide 287 53-1002600-01 Syslog messages A Notification OSPF intf config error , rid <router -id> , intf addr <ip-addr> , pkt src addr <src-ip-addr> , error type <error-type> , pkt type <pkt-type> Indicat es that an OSPF inter face configuration error has occurred. The <router -id> ...

  • Brocade Communications Systems 6650 - page 306

    288 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Notification OSPF intf rcvd bad pkt: Bad Checksum, rid <ip-addr> , intf add r <ip-addr> , pkt size <num> , che cksum <num> , pkt src addr <ip-addr> , pkt type <type> The device receiv ed an OSPF packet that had an invalid checksum. The rid ...

  • Brocade Communications Systems 6650 - page 307

    Brocade ICX 6650 Administration Guide 289 53-1002600-01 Syslog messages A Notification OSPF intf retrans mit, rid <rout er-id> , intf addr <ip-addr> , nbr rid <nbr -router -id>, pkt type is <pkt-type> , LSA type <lsa-ty pe> , LSA id <lsa-id > , LSA rid <lsa-rout er-id> An OSPF interface on the Product Name ...

  • Brocade Communications Systems 6650 - page 308

    290 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Notification OSPF nbr state changed, ri d <router -id> , nbr addr <ip-addr> , nbr rid <nbr-r outer -Id>, state <ospf- stat e> Indicat es that the stat e of an OSPF neighbor h as changed. The <router -id> is the router ID of the Product Name de vi ...

  • Brocade Communications Systems 6650 - page 309

    Brocade ICX 6650 Administration Guide 291 53-1002600-01 Syslog messages A Notification OSPF vir tual intf authe n failure, rid <rout er-id> , intf addr <ip-addr> , pkt src addr <sr c-ip-addr>, error type <error-type> , pkt typ e <pkt-type> Indicat es that an OSPF vir tual r outing interface authenticatio n failure has ...

  • Brocade Communications Systems 6650 - page 310

    292 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Notification OSPF vir tual intf config err or , rid <rout er-id> , intf addr <ip-addr> , pkt src addr <sr c-ip-addr>, error type <error-type> , pkt typ e <pkt-type> Indicat es that an OSPF vir tual r outing interface configuration err or has occu ...

  • Brocade Communications Systems 6650 - page 311

    Brocade ICX 6650 Administration Guide 293 53-1002600-01 Syslog messages A Notification OSPF vir tual intf retrans mit, rid <router -id> , intf addr <ip-addr> , nbr rid <nbr -router -id>, pkt type is <pkt-type> , LSA type <lsa-ty pe> , LSA id <lsa-id > , LSA rid <lsa-router-id> An OSPF interface on the Produ ...

  • Brocade Communications Systems 6650 - page 312

    294 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A Notification OSPF vir tua l nbr stat e changed, rid <rout er-id> , nbr addr <ip-a d dr> , nbr rid <nbr-r outer -id>, state <ospf-s tate> Indicat es that the stat e of an OSPF virtual neighbor h as changed. The <router -id> is the router ID of the ...

  • Brocade Communications Systems 6650 - page 313

    Brocade ICX 6650 Administration Guide 295 53-1002600-01 Syslog messages A Notification VRRP intf state changed, intf <portnum> , vrid <vir tual-router-id>, state <vrrp-state> VRRP (IPv6) in tf state changed, intf <portnum> , vrid <vir tual-router-id>, state <vrrp-state> A state change has occurred in a Virtual Ro ...

  • Brocade Communications Systems 6650 - page 314

    296 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A War n in g li s t <ACL -num> denied <ip-proto> <src-ip-addr> (<src-tcp/ud p-por t>) (Ethernet <por tnum> <mac-addr> ) -> <dst-ip-addr> (<dst -tcp/udp-por t>), 1 ev ent(s) Indicates that an A ccess Control List (ACL) denied (d ...

  • Brocade Communications Systems 6650 - page 315

    Brocade ICX 6650 Administration Guide 297 53-1002600-01 Syslog messages A Warning No global IP! cann ot send IGMP msg. The device is config ured for ip multicast active but th er e i s no c on fi gu re d I P ad d res s and the device can not send out IGMP queries. War ning No of prefixes re ceived from B GP peer <ip-addr> ex ceeds warning lim ...

  • Brocade Communications Systems 6650 - page 316

    298 Brocade ICX 6650 Administration Guide 53-1002600-01 Syslog messages A ...

  • Brocade Communications Systems 6650 - page 317

    Brocade ICX 6650 Administration Guide 299 53-1002600-01 Appendix B NIAP-CCEVS Certification Some Brocade de vices hav e passed the Comm on Criteria (CC) certification te sting. This testing is sponsored by the National Inf ormation Assurance Pa r tnership (NIAP) - Common Criteri a Evaluation and V alidation Scheme (CCEVS). F or mo re information re ...

  • Brocade Communications Systems 6650 - page 318

    300 Brocade ICX 6650 Administration Guide 53-1002600-01 Local user password changes B ...

  • Brocade Communications Systems 6650 - page 319

    Brocade ICX 6650 Administration Guide 301 53-1002600-01 Index A alarm interval, setting , 226 alarm status values , 229 B banner configuration , 28 banner, setting a privileged EXEC CLI le vel , 30 boot preference, displaying , 56 broadcast, multicast, and unknown traffic limiting , 28 C CDP clearing information , 176 , 180 clearing statistics , 17 ...

  • Brocade Communications Systems 6650 - page 320

    302 Brocade ICX 6650 Administration Guide 53-1002600-01 command alias , 10 banner exec_mode , 30 banner incoming , 30 banner motd , 28 clear , 248 clear fdp coun ters , 177 , 180 clear fdp table , 176 , 180 clear ipv6 cache , 139 clear ipv6 neighbor , 139 clear ipv6 route , 140 clear ipv6 traffic , 140 clear ipv6 tunnel , 122 clear lldp neighbors , ...

  • Brocade Communications Systems 6650 - page 321

    Brocade ICX 6650 Administration Guide 303 53-1002600-01 ethernet , 196 lldp enable transmit ports , 194 lldp enable transmit ports ethernet , 195 lldp max-neighbors-per-port , 196 lldp max-total-neighbors , 195 lldp med location-id civic-address , 211 lldp med location-id coordinate-based , 209 lldp med location-id ecs- elin , 214 lldp med network- ...

  • Brocade Communications Systems 6650 - page 322

    304 Brocade ICX 6650 Administration Guide 53-1002600-01 command outpu t egress queue statistics , 250 IPv6 tunnel inte rface information , 124 sFlow information , 268 show fdp neighbor , 174 show ipv6 cache , 141 show ipv6 interface , 142 show ipv6 neighbor , 144 show ipv6 route command , 146 show ipv6 router , 147 show ipv6 tcp connections , 148 s ...

  • Brocade Communications Systems 6650 - page 323

    Brocade ICX 6650 Administration Guide 305 53-1002600-01 Maintenance (OAM) , 49 SNMP access , 155 software-based licensing , 73 Syslog , 231 flash image CLI commands , 52 determining version running on device , 50 file types , 53 verification , 51 , 52 flash memory copying a file to , 63 flow control configuration , 35 configuration notes , 35 , 38 ...

  • Brocade Communications Systems 6650 - page 324

    306 Brocade ICX 6650 Administration Guide 53-1002600-01 switch , 108 configurin g ICMP rate limiting , 128 configuring IPv6 manageme nt ACLs , 112 configuring on each router interface , 108 configuring reachable time for remote nodes , 136 configuring SNMP V 3 , 113 configuring SNTP , 113 configuring the managemen t port , 108 defining a DNS entry ...

  • Brocade Communications Systems 6650 - page 325

    Brocade ICX 6650 Administration Guide 307 53-1002600-01 messages , 196 enabling support for tagged packets , 193 general operating prinicpl es , 186 general system information , 199 global configuration tasks , 192 MIB support , 191 organizationally-s pecific TLVs , 188 overview , 183 packets , 187 receive mode , 187 resetting statistics , 223 spec ...

  • Brocade Communications Systems 6650 - page 326

    308 Brocade ICX 6650 Administration Guide 53-1002600-01 port loop detection , 43 port statistics parameters , 245 viewing , 245 R RMON alarm (group 3) , 253 event (group 9) , 253 export configuration and statistics , 251 history (group 2) , 253 maximum number of entries allowed in control ta ble , 250 statistics , 251 RMON support , 250 S search st ...

  • Brocade Communications Systems 6650 - page 327

    Brocade ICX 6650 Administration Guide 309 53-1002600-01 show command ipv6 inter tunnel , 124 show boot-preference , 56 show clock , 28 show dir , 53 show fdp entry , 175 , 179 show fdp neighbor , 173 show fdp neighbors , 178 show fdp traffic , 180 show flash , 51 show interface , 37 , 249 show interfaces tunnel , 124 show ipv6 , 127 show ipv6 cache ...

  • Brocade Communications Systems 6650 - page 328

    310 Brocade ICX 6650 Administration Guide 53-1002600-01 software licensing configuration tasks , 74 obtaining a license , 75 software reboot , 56 software upgrade , 54 special characters used in search string , 8 SSH using to install a software license , 85 , 86 , 88 start up confi guration , 58 static IPv6 route configuratio n , 118 static IPv6 ro ...

  • Brocade Communications Systems 6650 - page 329

    Brocade ICX 6650 Administration Guide 311 53-1002600-01 X XON and XOFF thresholds , 38 ...

  • Brocade Communications Systems 6650 - page 330

    312 Brocade ICX 6650 Administration Guide 53-1002600-01 ...

Fabbricante Brocade Communications Systems Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoBrocade Communications Systems 6650 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Brocade Communications Systems
- manuali per l’uso 6650
- schede prodotto Brocade Communications Systems
- opuscoli
- o etichette energetiche Brocade Communications Systems 6650
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Brocade Communications Systems 6650.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Brocade Communications Systems 6650, manuali di manutenzione, brevi manuali o manuali utente Brocade Communications Systems 6650. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Brocade Communications Systems 6650.

Manuali per l’uso simili

Manuale completo del dispositivo Brocade Communications Systems 6650, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Brocade Communications Systems 6650 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Brocade Communications Systems 6650.

Il manuale per l’uso completo Brocade Communications Systems, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Brocade Communications Systems 6650 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Brocade Communications Systems 6650, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Brocade Communications Systems 6650 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Brocade Communications Systems 6650 - che ci dovrebbe aiutare nei primi passi durante l'uso Brocade Communications Systems 6650
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Brocade Communications Systems 6650
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Brocade Communications Systems 6650 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Brocade Communications Systems 6650?

Utilizza il modulo sottostante

Se non hai risolto il problema con Brocade Communications Systems 6650 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Brocade Communications Systems 6650 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)