Italiano dropdown-ico

Manuale per l’uso Brocade Communications Systems 53-1002163-02

168 pagine 1.85 mb
Scarica

Vai alla pagina of 168

Summary
  • Brocade Communications Systems 53-1002163-02 - page 1

    53-1 002 1 63-02 30 June 20 11 ® DRAFT: BROCADE CONFIDENTIAL Con v erged Enhanced Etherne t Administrat or’s Guide Suppor ting F abric OS v7 .0.0 ...

  • Brocade Communications Systems 53-1002163-02 - page 2

    DRAFT: BROCADE CONFIDENTIAL Copyright © 2009-20 11 Brocade Communication s Systems, Inc. All Rights R eser ved. Brocade, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, IronP oint, IronShield, IronView , IronWare, JetCore, NetIron, SecureIro n, Ser verIr on, StorageX, an d T urboIron are regi stered trademarks, a nd DCFM, Extraordinary Netwo ...

  • Brocade Communications Systems 53-1002163-02 - page 3

    Converged Enhanced Ethernet Administrator ’s Guide iii 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Conv erged Enhanced Ethernet Administrat or’s Guid e 53-1 001 7 61-0 1 Updated f or Fabric O S v7 .0. 0. Added chapter for IGMP . M a rc h 2010 Conv erged Enhanced Ethernet Administrat or’s Guid e 53-1 002061-0 1 Updated t o suppor t iSCSI TL V co ...

  • Brocade Communications Systems 53-1002163-02 - page 4

    iv Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 5

    Converged Enhanced Ethernet Administrator ’s Guide v 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Contents About This Document In this chapt er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii Suppor ted har dware and ...

  • Brocade Communications Systems 53-1002163-02 - page 6

    vi Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL FCoE Initialization Pr otocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 FIP discov er y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 FIP login . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 7

    Converged Enhanced Ethernet Administrator ’s Guide vii 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Managing the FCoE configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 FCoE configuration guidelines and re strictions . . . . . . . . . . . . . 25 Clearing logins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 8

    viii Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL VLAN configuration and management . . . . . . . . . . . . . . . . . . . . . . . . 48 Enabling and disabl ing an int er face por t . . . . . . . . . . . . . . . . . . 4 8 Configuring the MTU on an int er face por t . . . . . . . . . . . . . . . . . 48 ...

  • Brocade Communications Systems 53-1002163-02 - page 9

    Converged Enhanced Ethernet Administrator ’s Guide ix 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL STP , RS TP , and MSTP configuration and management . . . . . . . . . . 64 Enabling STP , RS TP , or MSTP . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Disabling STP , RS TP , or MSTP . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ...

  • Brocade Communications Systems 53-1002163-02 - page 10

    x Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL LA CP configuration and management . . . . . . . . . . . . . . . . . . . . . . . . 83 Enabling LA CP on an CEE interface . . . . . . . . . . . . . . . . . . . . . . 83 Enabling LA CP on an inter face in La yer 2 mode . . . . . . . . . . . . 84 Configuri ...

  • Brocade Communications Systems 53-1002163-02 - page 11

    Converged Enhanced Ethernet Administrator ’s Guide xi 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL QoS ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7 Re writing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Queueing . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 12

    xii Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL RMON ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1 RMON configuration and management . . . . . . . . . . . . . . . . . . . . . . 13 1 Default RMON configuration . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 13

    Converged Enhanced Ethernet Administrator ’s Guide xiii 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Figures Figure 1 Multiple switch fabric configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Figure 2 CEE CLI command mode hie rarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Figure 3 ...

  • Brocade Communications Systems 53-1002163-02 - page 14

    xiv Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 15

    Converged Enhanced Ethernet Administrator ’s Guide xv 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Tables Ta b l e 1 Command syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Ta b l e 2 FCoE terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 16

    xvi Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 17

    Converged Enhanced Ethernet Administrator ’s Guide xvii 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii • Suppor ted har dware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii ? ...

  • Brocade Communications Systems 53-1002163-02 - page 18

    xviii Converged Enhanced Ethernet Administrator ’ s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL • Chapter 12, “Configuring 80 2. 1x Por t Authentication,” describes ho w to configure the 802. 1x Port Authentication prot ocol. • Chapter 13, “Configuring IGMP ,” describes how to configure IGMP snooping on the Br ocade FCoE hardware. ...

  • Brocade Communications Systems 53-1002163-02 - page 19

    Converged Enhanced Ethernet Administrator ’s Guide xix 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Document conventions This section describes te xt formatting con venti ons and important notice formats u sed in this document. Text formatting The narrative-t ext formatting con ven tions that are used are as f ollows: bold tex t Identifies command n ...

  • Brocade Communications Systems 53-1002163-02 - page 20

    xx Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL NOTE A note pr ovides a tip, guidance, or advice, em phasizes im por tan t information, or pr ovides a ref erence to related inf ormation. ATTENTION An Att ention statement indicat es potential damage to hardware or data. CAUTION A Caution stat ement a ...

  • Brocade Communications Systems 53-1002163-02 - page 21

    Converged Enhanced Ethernet Administrator ’s Guide xxi 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Brocade resources T o get up-to-the-minute information, go to http://my .brocade.com and register at no cost f or a user ID and passwor d. White papers, online demonstrations, and data sh eets are available thr ough the Brocade websit e at: http://www ...

  • Brocade Communications Systems 53-1002163-02 - page 22

    xxii Converged Enhanced Ethernet Admin istrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL 2. Switch Serial N umber The switch serial number and corresponding bar co de are pr ovided on the serial number label, as illustrated below: The serial number label is locat ed as follo ws: • Brocade 8000 —On the switch ID pull-out tab located ...

  • Brocade Communications Systems 53-1002163-02 - page 23

    Converged Enhanced Ethernet Administrator ’s Guide 1 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 1 Introducing FCoE In this chapter • FCoE terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • FCoE ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 24

    2 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 FCoE overview 1 DRAFT: BROCADE CONFIDENTIAL FCoE pr ovides a method of encapsulati ng the Fibr e Channel (FC) traf f ic ov er a physical Ethernet link. FCoE frames use a unique EtherT ype that enables FCoE traffic and standard Ethernet traf fic to be carried on the sam e link. FC ...

  • Brocade Communications Systems 53-1002163-02 - page 25

    Converged Enhanced Ethernet Administrator ’s Guide 3 53-1002163-02 Layer 2 Ethernet overview 1 DRAFT: BROCADE CONFIDENTIAL Layer 2 Ethernet overview The Brocade FCoE har dware contain CEE por ts th at support FCoE forwarding. The CEE por ts are also backwar ds compatible and suppor t classic La yer 2 Ethernet networks (see Figure 1 ). In Layer 2 ...

  • Brocade Communications Systems 53-1002163-02 - page 26

    4 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Layer 2 Ethernet overview 1 DRAFT: BROCADE CONFIDENTIAL • If the Ethernet F rame Check Sequence (FCS) is incorrect, because the swi tch is in cut-through mode, a correctly f ormatted Ethernet fram e is sent out with an incorrect FCS. • If the Ethernet frame is t oo shor t, the ...

  • Brocade Communications Systems 53-1002163-02 - page 27

    Converged Enhanced Ethernet Administrator ’s Guide 5 53-1002163-02 Layer 2 Ethernet overview 1 DRAFT: BROCADE CONFIDENTIAL Using MS TP , y ou can create multiple loop-free acti v e topologies on a single ph ysical topology . These loop-free t opologies are mapped to a set of configurable VLANs. This enables you to better utiliz e the physical res ...

  • Brocade Communications Systems 53-1002163-02 - page 28

    6 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Layer 2 Ethernet overview 1 DRAFT: BROCADE CONFIDENTIAL Queuing f eatures are described as f ollows: • RED—RED increases link utilization. When multi p le inbound traf fic streams are switched to the same outbound por t, and some traf fic streams send small frames while other ...

  • Brocade Communications Systems 53-1002163-02 - page 29

    Converged Enhanced Ethernet Administrator ’s Guide 7 53-1002163-02 Layer 2 Ethernet overview 1 DRAFT: BROCADE CONFIDENTIAL When setting the scheduling policy , each priori ty gr oup that is usin g DWRR scheduling can be set to use a per centage of the total bandwi dth b y setting the PG_Per centage parameter . For detailed inf o rmation on config ...

  • Brocade Communications Systems 53-1002163-02 - page 30

    8 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 FCoE Initialization Protocol 1 DRAFT: BROCADE CONFIDENTIAL NOTE The Brocade so f tware suppor ts a maximum 2 4 LAG int er faces. Flow Control 802.3x Ethernet pause and Ethernet Priority-based Flow Contr ol (PFC) are used to pre vent dropped frames by slo wing traf fic at the sour ...

  • Brocade Communications Systems 53-1002163-02 - page 31

    Converged Enhanced Ethernet Administrator ’s Guide 9 53-1002163-02 FCoE Initialization Protocol 1 DRAFT: BROCADE CONFIDENTIAL NOTE In the fabric-pr ovided MA C address format, VN _p or t MAC addresses are based on a 2 4-bit fabric-supplied v alue. The first three bytes of th is value is refe rred to as the FCMAP . The ne xt three byt es are the F ...

  • Brocade Communications Systems 53-1002163-02 - page 32

    10 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 FCoE Initialization Protocol 1 DRAFT: BROCADE CONFIDENTIAL FCoE login The Bro cade FCoE hardware FCoE login operat es as follo ws: • ENodes can log in t o the Broc ade FCoE hardw a re using FCoE encapsul at ed, FC Extended Link Service (ELS) frames. FLOGI and FDISC are accepted ...

  • Brocade Communications Systems 53-1002163-02 - page 33

    Converged Enhanced Ethernet Administrator ’s Guide 11 53-1002163-02 FCoE Initialization Protocol 1 DRAFT: BROCADE CONFIDENTIAL • Commit and abor t—Defined logingr oup changes ca n be abor ted with no effect on existing sessions. The Brocade FCoE hardware does not a pply the configurations to new session s until the changes are committed. Once ...

  • Brocade Communications Systems 53-1002163-02 - page 34

    12 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 FCoE qu euing 1 DRAFT: BROCADE CONFIDENTIAL NOTE When transmitting an RSCN, zoni ng rules still apply f or FCoE devices as the devices are t reated as regular FC N_por ts. • VF_por t RSCN—An RSCN is generated t o all regi stered members when a VF_port goes online or offline, ...

  • Brocade Communications Systems 53-1002163-02 - page 35

    Converged Enhanced Ethernet Administrator ’s Guide 13 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 2 Using the CEE CLI In this chapter • Management T ools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • CEE Command Line Inte r f ace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 36

    14 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE Command Line Interface 2 DRAFT: BROCADE CONFIDENTIAL NOTE The CEE configuratio n is not affect ed by configUpload and configDo wnload commands entered in the Fabric OS shell. Saving your configuration changes Any configuration changes made to the switch are written into the r ...

  • Brocade Communications Systems 53-1002163-02 - page 37

    Converged Enhanced Ethernet Administrator ’s Guide 15 53-1002163-02 CEE Command Li ne Interface 2 DRAFT: BROCADE CONFIDENTIAL NOTE While this example uses the admin role t o log in to the switch, any r ole listed in the “CEE CLI RBA C permissions” section can be used. switch login: admin Password: switch:admin> cmsh switch# T o return to t ...

  • Brocade Communications Systems 53-1002163-02 - page 38

    16 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE Command Line Interface 2 DRAFT: BROCADE CONFIDENTIAL NOTE At syst em star t up, if you try to enter privileged EXEC mode before the syst em has fully booted, the follo wing message is displayed: %Info: Please wait. System configuration is being loaded. Af ter the syst em has ...

  • Brocade Communications Systems 53-1002163-02 - page 39

    Converged Enhanced Ethernet Administrator ’s Guide 17 53-1002163-02 CEE Command Li ne Interface 2 DRAFT: BROCADE CONFIDENTIAL NOTE Pressing Ctrl+Z or ent ering the end command in an y mode returns you t o privileged EXEC mode. Entering exit in any mode returns y ou to the pre vious mode. CEE CLI keyboard shortcuts Ta b l e 5 lists CEE CLI keyboar ...

  • Brocade Communications Systems 53-1002163-02 - page 40

    18 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE Command Line Interface 2 DRAFT: BROCADE CONFIDENTIAL NOTE In EXEC and privileged EXEC modes, use the sho w histor y command to list the commands most recent ly entered. The switch retains the hist or y of the last 1 000 commands entered. Using the do command as a shortcut Y o ...

  • Brocade Communications Systems 53-1002163-02 - page 41

    Converged Enhanced Ethernet Administrator ’s Guide 19 53-1002163-02 CEE Command Li ne Interface 2 DRAFT: BROCADE CONFIDENTIAL If the question mark ( ? ) is typed within an inco mplete k eywor d b ut the k eyword matches se veral ke ywords, the CLI displays help f or all the matching ke ywor ds. switch# show i? interface Interface status and confi ...

  • Brocade Communications Systems 53-1002163-02 - page 42

    20 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE Command Line Interface 2 DRAFT: BROCADE CONFIDENTIAL last Displays o nly the last f ew lines of t he command output. tee Redirects the command output to the specif ied file . Note that this modi fier also displays the com mand output. FLASH Redire cts the output to flash memo ...

  • Brocade Communications Systems 53-1002163-02 - page 43

    Converged Enhanced Ethernet Administrator ’s Guide 21 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 3 Configuration management In this chapter • Configuration management tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 • Flash file manage ment commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 44

    22 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuration management tasks 3 DRAFT: BROCADE CONFIDENTIAL Display the running configuration file T o display the running configuration, per form the f ollowing task from EXEC or privileged EXEC mode. Enter the show running-config command. switch# show running-config Saving the ...

  • Brocade Communications Systems 53-1002163-02 - page 45

    Converged Enhanced Ethernet Administrator ’s Guide 23 53-1002163-02 Flash file management commands 3 DRAFT: BROCADE CONFIDENTIAL Archiving the startup configuration file This tasks allows y ou to archive the st ar tup config uration to an ar chive f older on an FTP site. T o archiv e the star tup configuration, per f orm th e follo wing task from ...

  • Brocade Communications Systems 53-1002163-02 - page 46

    24 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Debugging and logging commands 3 DRAFT: BROCADE CONFIDENTIAL The tasks listed in Ta b l e 8 are per formed fr om privileged EXEC mode. TA B L E 8 Debugging and logging commands Task Command Display debugging informatio n for CEE components. switch# show debug Displa y logging inf ...

  • Brocade Communications Systems 53-1002163-02 - page 47

    Converged Enhanced Ethernet Administrator ’s Guide 25 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 4 FCoE Configuration Management In this chapter • Managing the FCoE configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 • Configuring the FCoE login information . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 48

    26 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring the FCoE login information 4 DRAFT: BROCADE CONFIDENTIAL Clearing logins Perform the following task to clear logins. Displaying FCoE configuration-related information Perform the f oll owing tasks to displa y FCoE-related configuration information. Configuring the FCo ...

  • Brocade Communications Systems 53-1002163-02 - page 49

    Converged Enhanced Ethernet Administrator ’s Guide 27 53-1002163-02 Configuring the FCoE login informatio n 4 DRAFT: BROCADE CONFIDENTIAL Managing the current co nfiguration transaction NOTE The configuration change s created using the fcoelogingr oup command are kept in a transaction buf fer until y o u sa ve the bu f fer using the fabric-wide f ...

  • Brocade Communications Systems 53-1002163-02 - page 50

    28 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Creating an FCoE login group 4 DRAFT: BROCADE CONFIDENTIAL Saving the current FCoE configuration Perform the follo wing task to sa ve the current FCoE configuration. Creating an FCoE login group The FCoE login group enables you t o con figure login policies. Perform the f oll owi ...

  • Brocade Communications Systems 53-1002163-02 - page 51

    Converged Enhanced Ethernet Administrator ’s Guide 29 53-1002163-02 Creating an FCoE login group 4 DRAFT: BROCADE CONFIDENTIAL Modifying the FCoE login group device list Perform the follo wing task s to add or remo ve VN_por t devices from the FCoE login group. Deleting an FCoE login group Perform the f ollowing task to delete an FCoE login gr ou ...

  • Brocade Communications Systems 53-1002163-02 - page 52

    30 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Creating an FCoE login group 4 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 53

    Converged Enhanced Ethernet Administrator ’s Guide 31 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 5 Initial FCoE and CEE Configuration In this chapter • Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 • End to End FCoE using FC ISLs . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 54

    32 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 End to End FCoE using FC ISLs 5 DRAFT: BROCADE CONFIDENTIAL The follo wing diagram shows a deployment scenario where FCoE initiators are connected to FCoE and FC targ ets across multiple hops of FC ISLs . FIGURE 3 Deploying FCoE across mult iple hops of FC ISLs FCoE Logical Port ...

  • Brocade Communications Systems 53-1002163-02 - page 55

    Converged Enhanced Ethernet Administrator ’s Guide 33 53-1002163-02 High availability 5 DRAFT: BROCADE CONFIDENTIAL On an FCOE1 0-2 4 this mapping is as f ollows, a ssuming that the FCOE1 0-2 4 blade is in slot 4: • FCoE por t 4/0 maps to TE por t 4/0 • FCoE por t 4/1 maps to TE por t 4/1 • FCoE por t 4/23 maps to TE por t 4/23 High availab ...

  • Brocade Communications Systems 53-1002163-02 - page 56

    34 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 High availability 5 DRAFT: BROCADE CONFIDENTIAL Every configuration is either fully committ ed or no t, but nev er “half-complet e.” If you had star t ed ex ecuting the copy star tup running command, it will be resumed afte r failo ver before an y new CLI is allow ed to be ex ...

  • Brocade Communications Systems 53-1002163-02 - page 57

    Converged Enhanced Ethernet Administrator ’s Guide 35 53-1002163-02 Configuring the FCoE interfaces 5 DRAFT: BROCADE CONFIDENTIAL Configuring the FCoE interfaces FCoE maps are used to configure FCoE properties on interfaces. An FCoE map is a placeholder for an FCoE VLAN and a CEE map. Y ou can assign FC oE maps on to physical int er faces using t ...

  • Brocade Communications Systems 53-1002163-02 - page 58

    36 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring the FCoE VLAN 5 DRAFT: BROCADE CONFIDENTIAL VLAN 1 002 is reserved for FCoE VLAN. If VLAN 1 002 is already assigned as a LAN VLAN, it is automatically recreated as the FCoE VLA N while creating the d efault fcoe-map. The FCoE VLAN can be create d in the FCoE map confi ...

  • Brocade Communications Systems 53-1002163-02 - page 59

    Converged Enhanced Ethernet Administrator ’s Guide 37 53-1002163-02 Configuring DC BX 5 DRAFT: BROCADE CONFIDENTIAL 2. Apply the current FCoE pr ofile map to the interface using the fcoepor t command. switch(conf-if-te-0/0)# fcoeport 3. Return t o the privileged EXEC mode using the end co mmand. switch(conf-if-te-0/0)# end 4. Confirm the changes ...

  • Brocade Communications Systems 53-1002163-02 - page 60

    38 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring Spanning Tree Protocol 5 DRAFT: BROCADE CONFIDENTIAL Configuring Spanning Tree Protocol Spanning T ree Pr otocol (S TP) is a mechanism t o detec t and av oid loops in Ethernet ne tworks by establishing a fixed path betw een all the switches in a LAN. The Brocade FCoE ...

  • Brocade Communications Systems 53-1002163-02 - page 61

    Converged Enhanced Ethernet Administrator ’s Guide 39 53-1002163-02 CEE map configuration 5 DRAFT: BROCADE CONFIDENTIAL T o configure V LAN membership, per f orm the following steps in global configurat ion mode. 1. Create the VLAN int er faces on the Br ocade FCoE har dware using the CEE CLI. For details, see “Creating a VLAN interface” . Th ...

  • Brocade Communications Systems 53-1002163-02 - page 62

    40 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE map configu ration 5 DRAFT: BROCADE CONFIDENTIAL Strict Priority versus DWRR is deriv ed directly from the PGID value. All PGID s with prefix 15 receive the Strict Priority scheduling policy and all PGIDs in the range 0 thr ough 7 receive the DWRR scheduling policy . Relativ ...

  • Brocade Communications Systems 53-1002163-02 - page 63

    Converged Enhanced Ethernet Administrator ’s Guide 41 53-1002163-02 CEE map configuration 5 DRAFT: BROCADE CONFIDENTIAL 4. Defi ne the CEE map for PGID 1. switch(config-ceemap)# priority-group-table 1 weight 50 5. Enter the copy command to sa ve the running-config file to t he star tup-config file. switch(config)# do copy running-config startup-c ...

  • Brocade Communications Systems 53-1002163-02 - page 64

    42 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE audit logs 5 DRAFT: BROCADE CONFIDENTIAL CEE audit logs The CEE audit logs record all changes made by authorized users. This information is always present, irrespectiv e of the configuring entity . Because redundant configuration is no t recorded, only configuration changes t ...

  • Brocade Communications Systems 53-1002163-02 - page 65

    Converged Enhanced Ethernet Administrator ’s Guide 43 53-1002163-02 CEE audit logs 5 DRAFT: BROCADE CONFIDENTIAL 4. Revie w the D CE audit logs using the sho w accounting logs command. switch# show accounting logs 2009/06/24-02:15:54(UTC),root/root/NONE/console/CLI/EL34,config;rmon event 12 2009/06/24-02:21:13(UTC),root/root/NONE/console/CLI/EL34 ...

  • Brocade Communications Systems 53-1002163-02 - page 66

    44 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE audit logs 5 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 67

    Converged Enhanced Ethernet Administrator ’s Guide 45 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 6 Configuring VLANs In this chapter • VLAN ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 • Ingress VLAN filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 68

    46 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Ingress VLAN filtering 6 DRAFT: BROCADE CONFIDENTIAL • Admit VLAN tagged and untag ged frames—All tagged and untagged frames wo uld be processed as f ollows: - All untagged frames are clas sified into nativ e VLANs. - All frames egressing are untagged f or the nativ e VLANs. ...

  • Brocade Communications Systems 53-1002163-02 - page 69

    Converged Enhanced Ethernet Administrator ’s Guide 47 53-1002163-02 VLAN configuration guidelines a nd restrictions 6 DRAFT: BROCADE CONFIDENTIAL Additionally , there are impor tant facts you should kno w about the VLAN FDB: • The VLAN FDB co ntains inf ormation that helps det ermine the forwarding of an arriving frame based on MA C address and ...

  • Brocade Communications Systems 53-1002163-02 - page 70

    48 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 VLAN configuration and management 6 DRAFT: BROCADE CONFIDENTIAL VLAN configuration and management NOTE Y ou need to ent er either the copy running-config startup-config command or the write memory command to sa ve yo ur configuration changes to Flash so that they are not lost if ...

  • Brocade Communications Systems 53-1002163-02 - page 71

    Converged Enhanced Ethernet Administrator ’s Guide 49 53-1002163-02 VLAN configuration and management 6 DRAFT: BROCADE CONFIDENTIAL T o create a VLAN int er face, perform the f ollowing st eps from privileged EXEC mode. 1. En ter t he configure t erminal command to acce ss global configuratio n mode. 2. Enter the in terfac e vlan command t o assi ...

  • Brocade Communications Systems 53-1002163-02 - page 72

    50 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 VLAN configuration and management 6 DRAFT: BROCADE CONFIDENTIAL Configuring an interface port as a Layer 2 switch port T o configure the inter face as a Lay er 2 switch por t, perform the follo w ing steps fr om privileged EXEC mode. 1. En ter t he configure te rminal command to ...

  • Brocade Communications Systems 53-1002163-02 - page 73

    Converged Enhanced Ethernet Administrator ’s Guide 51 53-1002163-02 VLAN configuration and management 6 DRAFT: BROCADE CONFIDENTIAL switch(conf-if-te-0/19)# switchport mode trunk 5. Specify whether all, one, or none of the VLAN inter faces are allo wed to transmit and receiv e through the CEE inter face. Ent er the following command that is appro ...

  • Brocade Communications Systems 53-1002163-02 - page 74

    52 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring protocol-based VLAN classifi er rules 6 DRAFT: BROCADE CONFIDENTIAL 6. Enter the switchpor t converged allo wed vlan add vlan_id command to give access to individual VLANs. switch(conf-if-te-0/1)# switchport converged allowed vlan add 200 switch(conf-if-te-0/1)# switc ...

  • Brocade Communications Systems 53-1002163-02 - page 75

    Converged Enhanced Ethernet Administrator ’s Guide 53 53-1002163-02 Configuring protocol-based VLAN classifier rules 6 DRAFT: BROCADE CONFIDENTIAL NOTE FCoE Initialization Prot ocol (FIP) and FC oE cannot be manually conf igured in VLAN classif ier rules. They are part of the fcoepor t inter face config uration and are applied automatically when ...

  • Brocade Communications Systems 53-1002163-02 - page 76

    54 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring the MAC address table 6 DRAFT: BROCADE CONFIDENTIAL Activating a VLAN classifier group with an interface port T o associate a VLAN classif ier group with an inter face por t, per form the following st eps from privileged EXEC mode. 1. En ter t he configure te rminal c ...

  • Brocade Communications Systems 53-1002163-02 - page 77

    Converged Enhanced Ethernet Administrator ’s Guide 55 53-1002163-02 Configuring the MAC address table 6 DRAFT: BROCADE CONFIDENTIAL Specifying or disabling the aging time for MAC addresses Y ou can set the length of time that a dynami c entr y remains in the MA C address table af ter the entr y is used or updat ed. Static address entries are nev ...

  • Brocade Communications Systems 53-1002163-02 - page 78

    56 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring the MAC address table 6 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 79

    Converged Enhanced Ethernet Administrator ’s Guide 57 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 7 Configuring STP, RSTP, and MSTP In this chapter • STP o verview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 7 • RSTP o verview . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 80

    58 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 STP overview 7 DRAFT: BROCADE CONFIDENTIAL • Disabled—The interface is not par ticipating in spanning tree because of a shutdo wn por t, no link on the por t, or no spanning tree instance running on the por t. A por t par ticipating in span ning tree mov es through these stat ...

  • Brocade Communications Systems 53-1002163-02 - page 81

    Converged Enhanced Ethernet Administrator ’s Guide 59 53-1002163-02 RSTP overview 7 DRAFT: BROCADE CONFIDENTIAL This does not apply t o por ts connected to workstations or PCs; these ports remain in the forwarding stat e. 5. Enter the copy command to sa ve the running-config file to the star tu p -c on f ig file. When the spanning tree topology i ...

  • Brocade Communications Systems 53-1002163-02 - page 82

    60 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 RSTP overview 7 DRAFT: BROCADE CONFIDENTIAL With RSTP , the port roles f or the new int er f ace st ates are also different. RS TP dif ferentiat es explicitly between the state of the por t and the role it pla ys in the topology . RSTP uses the root por t and designat ed por t ro ...

  • Brocade Communications Systems 53-1002163-02 - page 83

    Converged Enhanced Ethernet Administrator ’s Guide 61 53-1002163-02 MSTP overview 7 DRAFT: BROCADE CONFIDENTIAL switch(conf-rstp)# hello-time 5 1 0. Set the method f or flushing mac-addresses in FDB, either accor ding to the IEEE standar d or the propriet y standard. For details, see “Flushing MAC addresses (RS TP and MSTP)” on page 7 1. swit ...

  • Brocade Communications Systems 53-1002163-02 - page 84

    62 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 MSTP overview 7 DRAFT: BROCADE CONFIDENTIAL NOTE Brocade suppor ts 15 MSTP instances and one MSTP region. MSTP intr oduces a hierarchical way of managing switch domains using regi ons. Switches that share common MSTP configuration attributes belong t o a region. The MSTP configur ...

  • Brocade Communications Systems 53-1002163-02 - page 85

    Converged Enhanced Ethernet Administrator ’s Guide 63 53-1002163-02 STP, RSTP, and MSTP configurat ion guidelines and restrictio ns 7 DRAFT: BROCADE CONFIDENTIAL For more inf ormation on MSTP , see “STP , RSTP , and MSTP configuration and management” on page 64. STP, RSTP, and MSTP configuration guidelines and restrictions Follo w t hese conf ...

  • Brocade Communications Systems 53-1002163-02 - page 86

    64 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 STP, RSTP, and MS TP conf iguration and man agement 7 DRAFT: BROCADE CONFIDENTIAL Ta b l e 17 lists the sw itch defaults that apply only to MSTP configurations. Ta b l e 1 8 lists the switch defaults for the 1 0-Gigabit Ethernet CEE interface-specific conf iguration. STP, RSTP, a ...

  • Brocade Communications Systems 53-1002163-02 - page 87

    Converged Enhanced Ethernet Administrator ’s Guide 65 53-1002163-02 STP, RSTP, and MSTP configuration and management 7 DRAFT: BROCADE CONFIDENTIAL switch(config)# protocol spanning-tree rstp Disabling STP, RSTP, or MSTP NOTE Using the no prot ocol spanning-tree command delet es the conte xt and all the configurations defined within the context or ...

  • Brocade Communications Systems 53-1002163-02 - page 88

    66 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 STP, RSTP, and MS TP conf iguration and man agement 7 DRAFT: BROCADE CONFIDENTIAL 1. En ter t he configure te rminal command to access globa l configuration mo de. 2. Enter the protocol comm and to enabl e STP , RSTP , or MSTP . switch(config)# protocol spanning-tree rstp 3. Spec ...

  • Brocade Communications Systems 53-1002163-02 - page 89

    Converged Enhanced Ethernet Administrator ’s Guide 67 53-1002163-02 STP, RSTP, and MSTP configuration and management 7 DRAFT: BROCADE CONFIDENTIAL T o specify the bridge maximu m aging time, per form the f ollowing steps fr om privil eged EXEC mode. 1. En ter t he configure te rminal command to access globa l configuration mo de. 2. Enter the pro ...

  • Brocade Communications Systems 53-1002163-02 - page 90

    68 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 STP, RSTP, and MS TP conf iguration and man agement 7 DRAFT: BROCADE CONFIDENTIAL NOTE For the chosen path-cost met hod to be activated, it should eithe r be configure d prior to creation of all por t-channels or the existing por t -channels must be disabled or enabled. T o speci ...

  • Brocade Communications Systems 53-1002163-02 - page 91

    Converged Enhanced Ethernet Administrator ’s Guide 69 53-1002163-02 STP, RSTP, and MSTP configuration and management 7 DRAFT: BROCADE CONFIDENTIAL Enabling Cisco interoperability (MSTP) In MSTP mode, use this command to enable or disa ble the ability of the Brocade FCoE har dware to inter operate with certain legacy Cisco switches. If Ci sco inte ...

  • Brocade Communications Systems 53-1002163-02 - page 92

    70 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 STP, RSTP, and MS TP conf iguration and man agement 7 DRAFT: BROCADE CONFIDENTIAL Specifying the maximum number of hops for a BPDU (MSTP) In MS TP mode, use this comm and to configure the maximum number of hops f or a BPDU in an MSTP reg ion. Specifying the maximum hops f o r a B ...

  • Brocade Communications Systems 53-1002163-02 - page 93

    Converged Enhanced Ethernet Administrator ’s Guide 71 53-1002163-02 STP, RSTP, and MSTP configuration and management 7 DRAFT: BROCADE CONFIDENTIAL Flushing MAC addresses (RSTP and MSTP) For RS TP and MSTP , use this command t o flush the MAC addre sses from the VLAN filte ring database (FDB). The VLAN FDB determines the f o rwarding of an incomin ...

  • Brocade Communications Systems 53-1002163-02 - page 94

    72 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring STP, RSTP, or MS TP on CEE interface ports 7 DRAFT: BROCADE CONFIDENTIAL T o restar t the prot ocol migration process, perf orm th e following tasks fr om privileged EXEC mode. 1. Enter the appr opriate f orm of the clea r command based on what you wan t to cle ar : ? ...

  • Brocade Communications Systems 53-1002163-02 - page 95

    Converged Enhanced Ethernet Administrator ’s Guide 73 53-1002163-02 Configuring STP, RSTP, or MS TP on CEE interface ports 7 DRAFT: BROCADE CONFIDENTIAL T o configure the path cost f or spanning tree ca lculations on the CEE interface, per form the follo wing steps fro m privileged EXEC mode. 1. En ter t he configure te rminal command to access g ...

  • Brocade Communications Systems 53-1002163-02 - page 96

    74 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring STP, RSTP, or MS TP on CEE interface ports 7 DRAFT: BROCADE CONFIDENTIAL Guard r oot pro tects the roo t bridge from mali cious attacks and unintentional misconf igurations where a bridge de vice that is not intended t o be the root bridge becomes the root bridge. Thi ...

  • Brocade Communications Systems 53-1002163-02 - page 97

    Converged Enhanced Ethernet Administrator ’s Guide 75 53-1002163-02 Configuring STP, RSTP, or MS TP on CEE interface ports 7 DRAFT: BROCADE CONFIDENTIAL 4. Enter the spanning-tree command to specify the restrictions for an MS TP instance on a CEE interface. switch(conf-if-te-0/1)# spanning-tree instance 1 restricted-role switch(conf-if-te-0/1)# s ...

  • Brocade Communications Systems 53-1002163-02 - page 98

    76 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring STP, RSTP, or MS TP on CEE interface ports 7 DRAFT: BROCADE CONFIDENTIAL T o specify the por t priority on the CEE inter face, per form the f ollowing steps fr om privileged EXEC mode. 1. En ter t he configure te rminal command to access globa l configuration mo de. 2 ...

  • Brocade Communications Systems 53-1002163-02 - page 99

    Converged Enhanced Ethernet Administrator ’s Guide 77 53-1002163-02 Configuring STP, RSTP, or MS TP on CEE interface ports 7 DRAFT: BROCADE CONFIDENTIAL T o enable spanning tree on the CEE int er face, per form the following st eps from privilege d EXEC mode. 1. En ter t he configure te rminal command to access globa l configuration mo de. 2. Ent ...

  • Brocade Communications Systems 53-1002163-02 - page 100

    78 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring STP, RSTP, or MS TP on CEE interface ports 7 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 101

    Converged Enhanced Ethernet Administrator ’s Guide 79 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 8 Configuring Link Aggregation In this chapter • Link aggregation o ver view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 • LACP configuration guidelines and restrictions . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 102

    80 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Link aggregation overview 8 DRAFT: BROCADE CONFIDENTIAL On each por t, link aggregation control: • Maintains configuration information to control port aggregation. • Exchanges configuration information with other devices to f o rm LAGs. • Attaches ports to and detaches port ...

  • Brocade Communications Systems 53-1002163-02 - page 103

    Converged Enhanced Ethernet Administrator ’s Guide 81 53-1002163-02 Link aggregatio n overview 8 DRAFT: BROCADE CONFIDENTIAL The Brocade 80 00 switch interoperat es with all of the major La yer 2/Lay er 3 a ggregation rout ers including Foundr y Networks, Cisco Systems, and Force1 0 Networks. FIGURE 5 Configuring LAGs for a top-of-the-rack CEE sw ...

  • Brocade Communications Systems 53-1002163-02 - page 104

    82 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Link aggregation overview 8 DRAFT: BROCADE CONFIDENTIAL Link Aggregation Control Protocol Link Aggregation Contr ol Prot ocol (LA CP) is an IE EE 802.3ad standards-based pr otocol that allows two par tner systems to dyna mically negotiate attrib ut es of physical links betw een t ...

  • Brocade Communications Systems 53-1002163-02 - page 105

    Converged Enhanced Ethernet Administrator ’s Guide 83 53-1002163-02 LACP configuration guidelines a nd restrictions 8 DRAFT: BROCADE CONFIDENTIAL LAG distribution pr ocess The LA G aggregator is associat ed with the collec tio n and distribution of Ethernet frames. The collection and distribution pr ocess is required t o guarantee the follo wing: ...

  • Brocade Communications Systems 53-1002163-02 - page 106

    84 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 LACP configuration and manageme nt 8 DRAFT: BROCADE CONFIDENTIAL T o enable LACP on a CE E interface, per form the f ollowing st eps from privileg ed EXEC mode. 1. En ter t he configure te rminal command to access globa l configuration mo de. 2. Enter the inter face command to sp ...

  • Brocade Communications Systems 53-1002163-02 - page 107

    Converged Enhanced Ethernet Administrator ’s Guide 85 53-1002163-02 LACP troubleshooting tips 8 DRAFT: BROCADE CONFIDENTIAL T o configure the LACP timeout period on a CE E interface, per form the f ollowing st eps from privileged EXEC mode. 1. En ter t he configure te rminal command to access globa l configuration mo de. 2. Enter the inter face c ...

  • Brocade Communications Systems 53-1002163-02 - page 108

    86 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 LACP troubleshooting tips 8 DRAFT: BROCADE CONFIDENTIAL • Make sure that LA CPDUs are bein g received and transm itted on both ends o f the link an d that there are no err or PDUs. This can be ve rified by ent ering the show lacp counters por t-channe l-num command and looking ...

  • Brocade Communications Systems 53-1002163-02 - page 109

    Converged Enhanced Ethernet Administrator ’s Guide 87 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 9 Configuring LLDP In this chapter • LLDP ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 7 • Lay er 2 topology mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 110

    88 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Layer 2 topology mapping 9 DRAFT: BROCADE CONFIDENTIAL Layer 2 topology mapping The LLDP pr otocol le ts network manageme nt sy stems accurat ely discover and mode l Layer 2 network t opologies. As LLDP devices transmit and receive advertisements, the devices store information th ...

  • Brocade Communications Systems 53-1002163-02 - page 111

    Converged Enhanced Ethernet Administrator ’s Guide 89 53-1002163-02 DCBX overview 9 DRAFT: BROCADE CONFIDENTIAL • IEEE 802. 1 organizational TL V set. This set pro v ides information to det ect mis matched settings between local and remote devices. A trap or event can be repor ted once a mismat ch is detect ed. This is an optional TL V . This s ...

  • Brocade Communications Systems 53-1002163-02 - page 112

    90 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DCBX overview 9 DRAFT: BROCADE CONFIDENTIAL DC BX us es LL DP to exc ha ng e pa ra mete r s b et wee n two link peers; DCBX is built on the LLDP infrastructure for the e xchange of inf ormation. DCBX-ex changed parameters are packaged into organization ally spec ific TL Vs. Th e ...

  • Brocade Communications Systems 53-1002163-02 - page 113

    Converged Enhanced Ethernet Administrator ’s Guide 91 53-1002163-02 DCBX interaction with other vendor devices 9 DRAFT: BROCADE CONFIDENTIAL PFC is defined by a one-byte bitmap . Each bit position st ands fo r a user priori ty . If a bit is set, the flow contr ol is enabled in bo th directions (Rx and Tx). DCBX interaction with other vendor devic ...

  • Brocade Communications Systems 53-1002163-02 - page 114

    92 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL LLDP configuration and management NOTE Y ou need to ent er either the copy running-config startup-config command or the write memory command to sa ve yo ur configuration changes to Flash so that they are not lost if ...

  • Brocade Communications Systems 53-1002163-02 - page 115

    Converged Enhanced Ethernet Administrator ’s Guide 93 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL Specifying a system name fo r the Brocade FCoE hardware The global syst em name for LLDP is useful for differentiating betw een sw itches. By def ault, the “host-name” from the chassis/entity MIB is used. By spec ...

  • Brocade Communications Systems 53-1002163-02 - page 116

    94 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL Enabling and disabling the receivin g and transmitting of LLDP frames By default both transmit an d receiv e f or LLDP frames is enabled. T o enable or disable the receiving (rx) and transmitting (tx) of LLDP frames, ...

  • Brocade Communications Systems 53-1002163-02 - page 117

    Converged Enhanced Ethernet Administrator ’s Guide 95 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL T o advertise the optional LLDP TL Vs, per form the f ollowing steps fr om privileged EXEC mode. 1. En ter t he configure te rminal command to access globa l configuration mo de. 2. Enter LLDP configuration mode. swi ...

  • Brocade Communications Systems 53-1002163-02 - page 118

    96 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL 4. Advertise the TL V . switch(conf-lldp)# advertise dcbx-fcoe-app-tlv Configuring iSCSI priority bits The iSCSI priority bit setting is a bitmap setting wh ere each bit position stands f or a priority . When you set ...

  • Brocade Communications Systems 53-1002163-02 - page 119

    Converged Enhanced Ethernet Administrator ’s Guide 97 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL 9. Advertise the LLDP DCBX-relat ed TL Vs. switch(conf-lldp-profile-UK_LLDP_IT)# advertise dot1-tlv switch(conf-lldp-profile-UK_LLDP_IT)# advertise dot3-tlv switch(conf-lldp-profile-UK_LLDP_IT)# advertise advertise d ...

  • Brocade Communications Systems 53-1002163-02 - page 120

    98 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL Configuring LLDP interface-level command options Only one LLDP pr ofile can be assigned to an int er face. If you do no t use the lldp profile option at the interface level, the global configuration is used on the in ...

  • Brocade Communications Systems 53-1002163-02 - page 121

    Converged Enhanced Ethernet Administrator ’s Guide 99 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL switch# show lldp neighbors • Display LLDP neighbor-relat ed detail information. switch# show lldp neighbors detail • Display LLDP int er face-related inf ormation. switch# show lldp interface tengigabitethernet ...

  • Brocade Communications Systems 53-1002163-02 - page 122

    100 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 LLDP configuration and management 9 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 123

    Converged Enhanced Ethernet Administrator ’s Guide 101 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 10 Configuring ACLs In this chapter • A CL overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1 • Default A CL configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 124

    102 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Default ACL configurati on 10 DRAFT: BROCADE CONFIDENTIAL MA C ACLs are supported on the f ollowing interface types: • Physical int er faces • Logical inter faces (LAGs) • VLANs Default ACL configuration Ta b l e 2 2 lists the default ACL configuration. ACL configuration g ...

  • Brocade Communications Systems 53-1002163-02 - page 125

    Converged Enhanced Ethernet Administrator ’s Guide 103 53-1002163-02 ACL configuration and management 10 DRAFT: BROCADE CONFIDENTIAL 3. Enter the deny command t o create a rule in the MA C AC L to drop traffic with the source MA C address. switch(conf-macl-std)# deny 0022.3333.4444 count 4. Enter the permit command to create a rule in the MA C AC ...

  • Brocade Communications Systems 53-1002163-02 - page 126

    104 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 ACL configuration and management 10 DRAFT: BROCADE CONFIDENTIAL NOTE Using the permit and den y ke ywords, y ou can create man y dif ferent rules. Th e examples in this section pro vide the basic knowledge needed to modify MA C ACLs. NOTE This exam ple assumes that test_0 2 cont ...

  • Brocade Communications Systems 53-1002163-02 - page 127

    Converged Enhanced Ethernet Administrator ’s Guide 105 53-1002163-02 ACL configuration and management 10 DRAFT: BROCADE CONFIDENTIAL Applying a MAC ACL to a CEE interface Ensure that the ACL that yo u want to apply e xists and is configured to filte r traf fic in the manner that you need f or this CEE int er face. An ACL does no t take ef fect un ...

  • Brocade Communications Systems 53-1002163-02 - page 128

    106 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 ACL configuration and management 10 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 129

    Converged Enhanced Ethernet Administrator ’s Guide 107 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 11 Configuring QoS In this chapter • QoS ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 7 • Re writing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 130

    108 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Rewriting 11 DRAFT: BROCADE CONFIDENTIAL • Scheduling—When multiple queues are activ e and cont ending for output on a common physical port the scheduling al gorithm selects the ord er the queues are serviced. Scheduling algorithms include Strict Prio rity (SP) and Deficit W ...

  • Brocade Communications Systems 53-1002163-02 - page 131

    Converged Enhanced Ethernet Administrator ’s Guide 109 53-1002163-02 Queueing 11 DRAFT: BROCADE CONFIDENTIAL Ta b l e 2 3 presents the La yer 2 QoS untrust ed user priority generation table. NOTE Non-tagged Ethernet frames are int erpreted as incoming CoS value of 0 (zer o). Y ou can ov erride the default user -priority mapping by applying e xpli ...

  • Brocade Communications Systems 53-1002163-02 - page 132

    110 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Queueing 11 DRAFT: BROCADE CONFIDENTIAL T o configure the QoS trust mode, per form the f ollowing steps fr om privileged EXEC mode. 1. Enter global conf iguration mode. switch# configure terminal 2. Specify the 10-gigabit Ethernet int er face. switch(config)# interface tengigabi ...

  • Brocade Communications Systems 53-1002163-02 - page 133

    Converged Enhanced Ethernet Administrator ’s Guide 111 53-1002163-02 Queueing 11 DRAFT: BROCADE CONFIDENTIAL 3. Activat e or apply changes made to the CoS-to-CoS mutation QoS map name. In th is example ‘test’ is used. switch(conf-if-te-0/2)# qos map cos-mutation test 4. Specify the trust mode for incoming traff ic. Use this command to spec if ...

  • Brocade Communications Systems 53-1002163-02 - page 134

    112 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Queueing 11 DRAFT: BROCADE CONFIDENTIAL Multicast traffic Fabric OS v7 .0.0suppor ts f our multicast traf fic cl asses for isolation and t o control servici ng f or different priorities of applicatio n data. T raf fic classes are numbered from 0 through 3, with higher values des ...

  • Brocade Communications Systems 53-1002163-02 - page 135

    Converged Enhanced Ethernet Administrator ’s Guide 113 53-1002163-02 Congestion control 11 DRAFT: BROCADE CONFIDENTIAL 4. En te r th e c opy co m man d to save th e r un ni ng -c on f ig fi le to t he st ar tu p-c on f ig fi le . switch(config)# do copy running-config startup-config Verifying a mapping CoS-to-Traffic-Class T o verify a CoS-t o- T ...

  • Brocade Communications Systems 53-1002163-02 - page 136

    114 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Congestion control 11 DRAFT: BROCADE CONFIDENTIAL consume the full buffer memory . Thresholds ca n also be used t o bound the maximum queueing dela y for each traffic class. Additionally if the sum of the thresholds f or a por t is set below 1 00 percent of the buffer memory , t ...

  • Brocade Communications Systems 53-1002163-02 - page 137

    Converged Enhanced Ethernet Administrator ’s Guide 115 53-1002163-02 Congestion control 11 DRAFT: BROCADE CONFIDENTIAL time, once it completes transmission of any frame in progress. Y ou can use this f eature to reduce Ethernet frame losses by using a standardized mechanism. Howe ver the Pause me chanism does not hav e the abilit y to selectively ...

  • Brocade Communications Systems 53-1002163-02 - page 138

    116 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Multicast rate limiting 11 DRAFT: BROCADE CONFIDENTIAL • Both ends of a link must be configured identically f or Ethernet Pause or Ethernet Priority Flow Control because they are incompatible. Enabling an Ethernet PFC T o enable Ethernet PFC, per f orm the follo wing steps fro ...

  • Brocade Communications Systems 53-1002163-02 - page 139

    Converged Enhanced Ethernet Administrator ’s Guide 117 53-1002163-02 Scheduling 11 DRAFT: BROCADE CONFIDENTIAL 3. En te r th e c opy co m man d to save th e r un ni ng -c on f ig fi le to t he st ar tu p-c on f ig fi le . switch(config)# do copy running-config startup-config Scheduling Scheduling arbitrates among multiple queues wa iting t o tran ...

  • Brocade Communications Systems 53-1002163-02 - page 140

    118 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Scheduling 11 DRAFT: BROCADE CONFIDENTIAL Deficit Weight ed Round Robin (DWRR) is an im prov ed version of WRR. DWRR remembers the ex cess used when a queue goes ov er its bandwidt h allocation and reduces the queue's bandwidth allocation in the subsequent roun ds. This way ...

  • Brocade Communications Systems 53-1002163-02 - page 141

    Converged Enhanced Ethernet Administrator ’s Guide 119 53-1002163-02 CEE map configuration 11 DRAFT: BROCADE CONFIDENTIAL 2. Specify the schedule to use and the traf fic class to bandwidth mapping. switch(config)# qos queue scheduler strict-priority 4 dwrr 10 20 30 40 3. En te r th e c opy co m man d to save th e r un ni ng -c on f ig fi le to t ...

  • Brocade Communications Systems 53-1002163-02 - page 142

    120 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE map configu ration 11 DRAFT: BROCADE CONFIDENTIAL CEE Priority Gr oup T able defines each Priority Gr oup ID (PGID) and its scheduling policy (Strict Priority versus DWRR, DWRR weight, relativ e priori ty), and par tially defines the congestion control (PFC) configuration. T ...

  • Brocade Communications Systems 53-1002163-02 - page 143

    Converged Enhanced Ethernet Administrator ’s Guide 121 53-1002163-02 CEE map configuration 11 DRAFT: BROCADE CONFIDENTIAL CEE Priority T able defin es each CoS mapping to Priority Group, and completes PFC configuration. There are eight r ows in the CEE Priority T able. Ta b l e 3 0 details the default CEE Priority T able configuration. Defining a ...

  • Brocade Communications Systems 53-1002163-02 - page 144

    122 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 CEE map configu ration 11 DRAFT: BROCADE CONFIDENTIAL Applying a CEE provisioni ng map to an interface T o apply a CEE pro visioning map, per form th e f ollowing steps from privileged EXEC mode. 1. Enter global conf iguration mode. switch# configure terminal 2. Specify the 10-g ...

  • Brocade Communications Systems 53-1002163-02 - page 145

    Converged Enhanced Ethernet Administrator ’s Guide 123 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 12 Configuring 802.1x Por t Authentication In this chapter • 802. 1x pro tocol ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 • 802. 1x configuration guidelines and restrictions . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 146

    124 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 802.1x authentication configuration tasks 12 DRAFT: BROCADE CONFIDENTIAL 802.1x authentication configuration tasks The tasks in this section describe the common 802. 1x operations that you will need to perform. For a complete description of all the available 802. 1x CLI commands ...

  • Brocade Communications Systems 53-1002163-02 - page 147

    Converged Enhanced Ethernet Administrator ’s Guide 125 53-1002163-02 Interface-specific administrative tasks for 802.1x 12 DRAFT: BROCADE CONFIDENTIAL 2. Use the interface command t o select the interface por t to modify . switch(config)# interface tengigabitethernet 1/12 3. Use the dot1x authentication comman d to enable 802.1x authentication. s ...

  • Brocade Communications Systems 53-1002163-02 - page 148

    126 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Interface-specific admini strative tasks for 802.1x 12 DRAFT: BROCADE CONFIDENTIAL switch(config)# interface tengigabitethernet 1/12 3. Use the no dot1x port-control command t o disable 8 02. 1x Authentication. switch(conf-if-te-1/12)# no dot1x authentication 4. Enter the copy c ...

  • Brocade Communications Systems 53-1002163-02 - page 149

    Converged Enhanced Ethernet Administrator ’s Guide 127 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 13 Configuring IGMP In this chapter • About IGMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7 • Configuring IGMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 150

    128 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Configuring IGMP 13 DRAFT: BROCADE CONFIDENTIAL Multicast routing Multicast rout ers use IGMP to learn which gro ups ha ve members on each of their attached physic al networks. A multicast router k eeps a list of multic ast group memberships f or each attached networ k, and a ti ...

  • Brocade Communications Systems 53-1002163-02 - page 151

    Converged Enhanced Ethernet Administrator ’s Guide 129 53-1002163-02 Configuring IGMP snooping querier 13 DRAFT: BROCADE CONFIDENTIAL 9. Optional: Ac tivate th e IGMP querier function ality with additional features. Configuring IGMP snooping querier If your multicast traffic is not rout ed because Prot ocol-Independent Multicast (PIM) and IGMP ar ...

  • Brocade Communications Systems 53-1002163-02 - page 152

    130 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Monitoring IGMP 13 DRAFT: BROCADE CONFIDENTIAL NOTE Use the no ip igmp snooping mr outer command t o return to the def ault setting. 3. Return to global configuration mode. switch(conf-if-vl-25)# exit 4. Configure the mrouter timeout value. switch(config)# ip igmp snooping mrout ...

  • Brocade Communications Systems 53-1002163-02 - page 153

    Converged Enhanced Ethernet Administrator ’s Guide 131 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Chapter 14 Configuring RMON In this chapter • RMON ov er view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1 • RMON configuration and management . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems 53-1002163-02 - page 154

    132 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 RMON configuration and management 14 DRAFT: BROCADE CONFIDENTIAL • Broadcast packets • Multicast pack ets • CRC errors T o collect RMON gr oup statistics on an interf ace and enable co llection histor y , per f orm t he follo wing steps fro m privileged EXEC mode. 1. En te ...

  • Brocade Communications Systems 53-1002163-02 - page 155

    Converged Enhanced Ethernet Administrator ’s Guide 133 53-1002163-02 RMON configuration and management 14 DRAFT: BROCADE CONFIDENTIAL 2. Configure the RMON ev ent. switch(config)# rmon event 27 description Rising_Threshold log owner john_smith trap syslog 3. Enter the copy command to sa ve the running-config file to the startup-confi g file. swit ...

  • Brocade Communications Systems 53-1002163-02 - page 156

    134 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 RMON configuration and management 14 DRAFT: BROCADE CONFIDENTIAL ...

  • Brocade Communications Systems 53-1002163-02 - page 157

    Converged Enhanced Ethernet Administrator ’s Guide 135 53-1002163-02 Appendix A Brocade 8000 Replacement It is important that the new Br ocade 8000 has th e identical se tup to the original Br ocade 8000. This process updat es the firm ware and configurat ion files on the new Br ocade 8000 to match the original Br ocade 8000, then yo u move the d ...

  • Brocade Communications Systems 53-1002163-02 - page 158

    136 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Brocade 8000 Replacement A IPv6 Gateways: new_switch:admin> ipaddrset Ethernet IP Address [10.77.77.77]: 10.24.51.25 Ethernet Subnetmask [255.255.255.0]: 255.255.252.0 Gateway IP Address [10.77.77.1]: 10.24.48.1 DHCP [Off]: 4. Use the chassisname comm and to learn the chassis ...

  • Brocade Communications Systems 53-1002163-02 - page 159

    Converged Enhanced Ethernet Administrator ’s Guide 137 53-1002163-02 Brocade 8000 Replaceme nt A 9. Use the configupload command to sa ve the SAN configuration settings o f the original switch. original_switch:admin> configupload Protocol (scp, ftp, local) [ftp]: Server Name or IP Address [host]: 10.243.80.42 User Name [user]: anonymous Path/F ...

  • Brocade Communications Systems 53-1002163-02 - page 160

    138 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Brocade 8000 Replacement A Effective Configuration: cfg: host1_fcoe zone: w2k3_cna1: 21:01:00:00:c8:98:ab:78 ……output truncated …. new_switch:admin> cfgactvshow Effective Configuration: cfg: host1_fcoe zone: w2k3_cna1: 21:01:00:00:c8:98:ab:78 ……output truncated …. ...

  • Brocade Communications Systems 53-1002163-02 - page 161

    Converged Enhanced Ethernet Administrator ’s Guide 139 53-1002163-02 Brocade 8000 Replaceme nt A ! Protocol spanning-tree rstp ! vlan classifier rule 1 proto fcoe encap ethv2 vlan classifier rule 2 proto fip encap ethv2 vlan classifier group 1 add rule 1 vlan classifier group 1 add rule 2 ! ………….output truncated …… new_switch# exit 17 ...

  • Brocade Communications Systems 53-1002163-02 - page 162

    140 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 Brocade 8000 Replacement A ...

  • Brocade Communications Systems 53-1002163-02 - page 163

    Converged Enhanced Ethernet Administrator ’s Guide 141 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Index Symbols Numerics 802.1x LAG , 123 overview , 123 timeouts , 125 A Access Control Lists See ACL access interface, configuring , 50 access mode , 45 , 50 ACL configuration guidel ines and restrictions , 102 configuration procedur es applying a MAC ...

  • Brocade Communications Systems 53-1002163-02 - page 164

    142 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL CEE switch congestion control and queuing , 5 flow control , 8 Layer 2 Ethernet , 3 Layer 2 forwarding , 3 loop-free , 4 tagging , 4 trunking , 7 Cisco interoperability , disabling for MSTP , 69 Cisco interoperability, enabling for MSTP , 69 classifie ...

  • Brocade Communications Systems 53-1002163-02 - page 165

    Converged Enhanced Ethernet Administrator ’s Guide 143 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL configuration , 26 Layer 2 Ethernet overview , 3 login , 10 logout , 10 overview , 1 queuing , 12 speed negotiation , 25 terminology CEE , 1 ENode , 1 FCoE Forwarder (FCF) , 1 VF_port , 1 VN_port , 1 unsupported features , 25 VLAN forwarding , 4 FCoE ...

  • Brocade Communications Systems 53-1002163-02 - page 166

    144 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Layer 2 ACL Ethernet overview , 3 Layer 2 forwarding , 3 link aggregation Brocade-proprietary , 82 dynamic , 82 LACP , 82 LAG distribution process , 83 LAGs , 79 overview , 79 static , 82 Link Aggregation Control Protocol See LACP link aggregation gro ...

  • Brocade Communications Systems 53-1002163-02 - page 167

    Converged Enhanced Ethernet Administrator ’s Guide 145 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL Q QoS CEE QoS overview , 39 , 119 configuration procedur es applying a CEE provisioning map , 41 , 122 mapping a priority group table , 40 , 121 mapping a priority-table , 41 , 121 overview , 39 , 119 verifying CEE maps , 41 , 122 congestion c ontrol ...

  • Brocade Communications Systems 53-1002163-02 - page 168

    146 Converged Enhanced Ethernet Administrator ’s Guide 53-1002163-02 DRAFT: BROCADE CONFIDENTIAL transmit hold count, configuring for RSTP, MSTP , 68 troubleshooting tips, LACP , 85 trunk interface, configuring , 50 trunk mode , 45 , 50 trunking , 7 U unsupported features , 25 user-priority mapping, QoS , 108 V Virtual LANs See VLAN VLAN applying ...

Fabbricante Brocade Communications Systems Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoBrocade Communications Systems 53-1002163-02 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Brocade Communications Systems
- manuali per l’uso 53-1002163-02
- schede prodotto Brocade Communications Systems
- opuscoli
- o etichette energetiche Brocade Communications Systems 53-1002163-02
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Brocade Communications Systems 53-1002163-02.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Brocade Communications Systems 53-1002163-02, manuali di manutenzione, brevi manuali o manuali utente Brocade Communications Systems 53-1002163-02. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Brocade Communications Systems 53-1002163-02.

Manuali per l’uso simili

Manuale completo del dispositivo Brocade Communications Systems 53-1002163-02, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Brocade Communications Systems 53-1002163-02 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Brocade Communications Systems 53-1002163-02.

Il manuale per l’uso completo Brocade Communications Systems, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Brocade Communications Systems 53-1002163-02 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Brocade Communications Systems 53-1002163-02, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Brocade Communications Systems 53-1002163-02 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Brocade Communications Systems 53-1002163-02 - che ci dovrebbe aiutare nei primi passi durante l'uso Brocade Communications Systems 53-1002163-02
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Brocade Communications Systems 53-1002163-02
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Brocade Communications Systems 53-1002163-02 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Brocade Communications Systems 53-1002163-02?

Utilizza il modulo sottostante

Se non hai risolto il problema con Brocade Communications Systems 53-1002163-02 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Brocade Communications Systems 53-1002163-02 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)