Manuale per l’uso Photogenic Professional Lighting 1250, 1250DR, 2500DR

20 pagine 0.86 mb
Scarica

Vai alla pagina of 20

Summary
  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 1

    1 P OWER L IGHT Operator’s Manual PowerLight 1250 PowerLight 1250DR PowerLight 2500DR & Remote Control Accessories Unit Number Assignment, Page 14 PLDIR-2 and PLDIR-1 Remote Digital Display, Page 15 PLIRC-1 Infrared Remote Controller, Page 16 ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 2

    2 OPERATOR MANUAL FOR MONOLIGHTS PowerLight 1250 PowerLight 1250DR PowerLight 2500DR OPERATOR MANUAL FOR ACCESSORIES PLDD-1 side display for model PL1250 only. PLDC-1 side display/manual controller for “DR” models. PLDIR-2 side display & IR receiver for “DR” models. PLIRC-1 hand held remote control for “DR” models. Thank you for sel ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 3

    3 SAFETY PRECAUTIONS Despite the measures that have been taken to make electronic flash equipment safe, it must be recognized that high voltages and high temperatures do exist within the power supply / lighting unit. Certain precautions must be observed in handling the unit. Contact with internal high voltage may result in severe injury or death. 1 ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 4

    4 Unpacking and Setup: (continued) The unit is shipped with the modeling lamp and flashtube not installed. While installing the modeling lamp and flashtube (with glove or clean cloth to protect the hand) be sure they are properly inserted and tight to avoid arcing and failure of the socket contacts during operation. Do not touch the glass tubes wit ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 5

    5 CONTROL PANEL AND BASIC OPERATION: Power Input: The power required to operate the PowerLight 1250, 1250DR or 2500DR is 105 to 125 volts AC, 60 Hz, 10 Amp. The power cord has a 125V, 10 Amp. rating. Replacement cords or extension cords rated for less amperage may overheat and should not be used with PowerLights. Circuit Protection: Circuit protect ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 6

    6 Power Switch: The power switch controls the AC power to both the modeling and flash circuits. You have the option to turn-off the modeling circuit independently. PowerLight Model PL1250 Flash Power: All settings and controls of the PowerLight 1250 are extremely stable and repeatable due to the use of an internal microcomputer. The 1250 and 1250DR ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 7

    7 Modeling Light: The modeling light has three modes of operation: 1. MANUAL adjustment [press the MANUAL button, LED on] adjusts the modeling lamp intensity with the MODEL slide control knob. As with flash power, minimum setting is full left and maximum setting is full right. The MODEL intensity scale corresponds to the FLASH intensity scale, meas ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 8

    8 PowerLight Models 1250DR and 2500DR Flash Power: Use the Adjust button to turn on the Flash ws red LED. Adjust the PowerLight 1250DR or 2500DR Flash power setting using the 1/2 or 1/10 f-stops UP/DOWN arrow buttons. Ready Light: The PowerLight 2500DR is fully charged when the READY lamp is on. Lowest power (32ws) charge time is a maximum of .8 se ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 9

    9 PowerLight Models 1250, 1250DR and 2500DR Test Function: The TEST button is pressed to fire the flashtube for test purposes. Flash Indication: The PowerLight indicates the flash has fired properly. The flash indication feature will dim the modeling light to its lowest setting, then intensify slowly to full brightness or to its original state. Thi ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 10

    10 OPERATION PowerLight Model 1250 and 1250DR Flashing Rate: The unit recharges quickly, as indicated by the READY light on the control panel. A quick series of flashes can be obtained within the limits of the recharge time. Continuous rapid flashing, however, can overheat and damage the flashtube and internal parts. The maximum recommended rate of ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 11

    11 SPECIFICATIONS PL1250 & PL1250DR General: Flash Power....................................................16 to 500 watt-seconds. maximum (6 f-stops) Flash Duration................................................1/1300 second at Full 1/640 second at 1/32 Recycling time................................................0.5 to 1.5 seconds Power Co ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 12

    12 OPERATION PowerLight Model 2500DR Flashing Rate: The unit recharges quickly, as indicated by the READY light on the control panel. A quick series of flashes can be obtained within the limits of the recharge time. Continuous rapid flashing, however, can overheat and damage the flashtube and internal parts. The maximum recommended rate of flashing ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 13

    13 SPECIFICATIONS PL2500DR General: Flash Power................................................ 32 to 1000 watt-seconds maximum. (6 f-stops) Flash Duration............................................ 1/770 second at Full 1/345 second at 1/32 Recycling time................................................0.8 to 3.0 seconds Power Control.............. ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 14

    14 ADVANCED POWERLIGHT FEATURES. Models PL1250, PL1250DR, and PL2500DR Automatic Dump Flash This feature will automatically flash the unit when the FLASH setting is lowered; otherwise, the internally stored power is discharged through a resistor, before the unit is READY . Flash Dump is faster. This feature can be turned on or off, by the user. Tur ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 15

    15 Advanced PL2 series Accessories. PLDD-1 Digital display for Model 1250 only. The PLDD-1 is a digital display to enhance the resolution and repeatability of the Model 1250’s Flash analog slide-pot control. It displays only Flash power, over the full range of 16 to 500 watt-seconds. Resolution of the PLDD-1 is 0.1 f-stop. The PLDD-1 should be mo ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 16

    16 Advanced PL2 series Accessories. PLIRC-1 Infrared remote controller for models 1250DR and 2500DR. (must be used with PLDIR-1 receivers) Similar to TV, VCR, DTV universal remote controllers, the PLIRC-2 can control up to nine (9) PowerLights with individual settings. If several PowerLights are used with identical settings the same unit number can ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 17

    17 POWERLIGHT QUICK CHANGE ACCESSORIES REFLECTORS: PL7R 7 1/2” Standard high grain reflector. 35 degree coverage. PL14R 14” Parabolic for portraits, feathering, flood and fill lighting. 60 degree coverage. PL16R 16” Parabolic for portraits, feathering, flood and fill lighting. 60 degree coverage. PL16BD 16” 2-panel clamp-fit barndoor & ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 18

    18 POWERLIGHT QUICK CHANGE ACCESSORIES UMBRELLAS: EC32BC 32” White satin flat panel inner umbrella with black blocking outer umbrella. EC45BC 45” White satin flat panel inner umbrella with black blocking outer umbrella. EC60BC 60” White satin flat panel inner umbrella with black blocking outer umbrella. EC32S 32” Silver satin flat panel inn ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 19

    19 General Trouble Shooting COMMON PROBLEMS AND CAUSES Unit does not charge. Probable causes: a. Fuse blown. (Unplug and discharge the unit-Replace fuse.) b. No line power to unit. (Check line cord and outlet.) c. Unit is on, but will not charge. (Safety thermal detector activated by heavy use, beyond specified Flashing Rates on page 9.) d. Unit co ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 20

    20 Limited PowerLight Warranty Photogenic Professional Lighting warranties the “standard line” of new PowerLight products to be free from defects in material and workmanship of the PL2 series of PowerLights for a period of two years from date of purchase. At our choice, we will repair or replace any PL2, Solair or Voltage Smart series light tha ...

Fabbricante Photogenic Professional Lighting Categoria Power Supply

I documenti che otteniamo dal fabbricante del dispositivoPhotogenic Professional Lighting 1250, 1250DR, 2500DR possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Photogenic Professional Lighting
- manuali per l’uso 1250, 1250DR, 2500DR
- schede prodotto Photogenic Professional Lighting
- opuscoli
- o etichette energetiche Photogenic Professional Lighting 1250, 1250DR, 2500DR
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Photogenic Professional Lighting 1250, 1250DR, 2500DR.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Photogenic Professional Lighting 1250, 1250DR, 2500DR, manuali di manutenzione, brevi manuali o manuali utente Photogenic Professional Lighting 1250, 1250DR, 2500DR. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Photogenic Professional Lighting 1250, 1250DR, 2500DR.

Manuale completo del dispositivo Photogenic Professional Lighting 1250, 1250DR, 2500DR, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Photogenic Professional Lighting 1250, 1250DR, 2500DR dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Photogenic Professional Lighting 1250, 1250DR, 2500DR.

Il manuale per l’uso completo Photogenic Professional Lighting, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Photogenic Professional Lighting 1250, 1250DR, 2500DR - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Photogenic Professional Lighting 1250, 1250DR, 2500DR, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Photogenic Professional Lighting 1250, 1250DR, 2500DR che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Photogenic Professional Lighting 1250, 1250DR, 2500DR - che ci dovrebbe aiutare nei primi passi durante l'uso Photogenic Professional Lighting 1250, 1250DR, 2500DR
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Photogenic Professional Lighting 1250, 1250DR, 2500DR
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Photogenic Professional Lighting 1250, 1250DR, 2500DR in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Photogenic Professional Lighting 1250, 1250DR, 2500DR?

Utilizza il modulo sottostante

Se non hai risolto il problema con Photogenic Professional Lighting 1250, 1250DR, 2500DR con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Photogenic Professional Lighting 1250, 1250DR, 2500DR è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)