English dropdown-ico

Manual Photogenic Professional Lighting 1250, 1250DR, 2500DR

20 pages 0.86 mb
Download

Go to site of 20

Summary
  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 1

    1 P OWER L IGHT Operator’s Manual PowerLight 1250 PowerLight 1250DR PowerLight 2500DR & Remote Control Accessories Unit Number Assignment, Page 14 PLDIR-2 and PLDIR-1 Remote Digital Display, Page 15 PLIRC-1 Infrared Remote Controller, Page 16 ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 2

    2 OPERATOR MANUAL FOR MONOLIGHTS PowerLight 1250 PowerLight 1250DR PowerLight 2500DR OPERATOR MANUAL FOR ACCESSORIES PLDD-1 side display for model PL1250 only. PLDC-1 side display/manual controller for “DR” models. PLDIR-2 side display & IR receiver for “DR” models. PLIRC-1 hand held remote control for “DR” models. Thank you for sel ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 3

    3 SAFETY PRECAUTIONS Despite the measures that have been taken to make electronic flash equipment safe, it must be recognized that high voltages and high temperatures do exist within the power supply / lighting unit. Certain precautions must be observed in handling the unit. Contact with internal high voltage may result in severe injury or death. 1 ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 4

    4 Unpacking and Setup: (continued) The unit is shipped with the modeling lamp and flashtube not installed. While installing the modeling lamp and flashtube (with glove or clean cloth to protect the hand) be sure they are properly inserted and tight to avoid arcing and failure of the socket contacts during operation. Do not touch the glass tubes wit ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 5

    5 CONTROL PANEL AND BASIC OPERATION: Power Input: The power required to operate the PowerLight 1250, 1250DR or 2500DR is 105 to 125 volts AC, 60 Hz, 10 Amp. The power cord has a 125V, 10 Amp. rating. Replacement cords or extension cords rated for less amperage may overheat and should not be used with PowerLights. Circuit Protection: Circuit protect ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 6

    6 Power Switch: The power switch controls the AC power to both the modeling and flash circuits. You have the option to turn-off the modeling circuit independently. PowerLight Model PL1250 Flash Power: All settings and controls of the PowerLight 1250 are extremely stable and repeatable due to the use of an internal microcomputer. The 1250 and 1250DR ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 7

    7 Modeling Light: The modeling light has three modes of operation: 1. MANUAL adjustment [press the MANUAL button, LED on] adjusts the modeling lamp intensity with the MODEL slide control knob. As with flash power, minimum setting is full left and maximum setting is full right. The MODEL intensity scale corresponds to the FLASH intensity scale, meas ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 8

    8 PowerLight Models 1250DR and 2500DR Flash Power: Use the Adjust button to turn on the Flash ws red LED. Adjust the PowerLight 1250DR or 2500DR Flash power setting using the 1/2 or 1/10 f-stops UP/DOWN arrow buttons. Ready Light: The PowerLight 2500DR is fully charged when the READY lamp is on. Lowest power (32ws) charge time is a maximum of .8 se ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 9

    9 PowerLight Models 1250, 1250DR and 2500DR Test Function: The TEST button is pressed to fire the flashtube for test purposes. Flash Indication: The PowerLight indicates the flash has fired properly. The flash indication feature will dim the modeling light to its lowest setting, then intensify slowly to full brightness or to its original state. Thi ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 10

    10 OPERATION PowerLight Model 1250 and 1250DR Flashing Rate: The unit recharges quickly, as indicated by the READY light on the control panel. A quick series of flashes can be obtained within the limits of the recharge time. Continuous rapid flashing, however, can overheat and damage the flashtube and internal parts. The maximum recommended rate of ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 11

    11 SPECIFICATIONS PL1250 & PL1250DR General: Flash Power....................................................16 to 500 watt-seconds. maximum (6 f-stops) Flash Duration................................................1/1300 second at Full 1/640 second at 1/32 Recycling time................................................0.5 to 1.5 seconds Power Co ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 12

    12 OPERATION PowerLight Model 2500DR Flashing Rate: The unit recharges quickly, as indicated by the READY light on the control panel. A quick series of flashes can be obtained within the limits of the recharge time. Continuous rapid flashing, however, can overheat and damage the flashtube and internal parts. The maximum recommended rate of flashing ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 13

    13 SPECIFICATIONS PL2500DR General: Flash Power................................................ 32 to 1000 watt-seconds maximum. (6 f-stops) Flash Duration............................................ 1/770 second at Full 1/345 second at 1/32 Recycling time................................................0.8 to 3.0 seconds Power Control.............. ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 14

    14 ADVANCED POWERLIGHT FEATURES. Models PL1250, PL1250DR, and PL2500DR Automatic Dump Flash This feature will automatically flash the unit when the FLASH setting is lowered; otherwise, the internally stored power is discharged through a resistor, before the unit is READY . Flash Dump is faster. This feature can be turned on or off, by the user. Tur ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 15

    15 Advanced PL2 series Accessories. PLDD-1 Digital display for Model 1250 only. The PLDD-1 is a digital display to enhance the resolution and repeatability of the Model 1250’s Flash analog slide-pot control. It displays only Flash power, over the full range of 16 to 500 watt-seconds. Resolution of the PLDD-1 is 0.1 f-stop. The PLDD-1 should be mo ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 16

    16 Advanced PL2 series Accessories. PLIRC-1 Infrared remote controller for models 1250DR and 2500DR. (must be used with PLDIR-1 receivers) Similar to TV, VCR, DTV universal remote controllers, the PLIRC-2 can control up to nine (9) PowerLights with individual settings. If several PowerLights are used with identical settings the same unit number can ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 17

    17 POWERLIGHT QUICK CHANGE ACCESSORIES REFLECTORS: PL7R 7 1/2” Standard high grain reflector. 35 degree coverage. PL14R 14” Parabolic for portraits, feathering, flood and fill lighting. 60 degree coverage. PL16R 16” Parabolic for portraits, feathering, flood and fill lighting. 60 degree coverage. PL16BD 16” 2-panel clamp-fit barndoor & ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 18

    18 POWERLIGHT QUICK CHANGE ACCESSORIES UMBRELLAS: EC32BC 32” White satin flat panel inner umbrella with black blocking outer umbrella. EC45BC 45” White satin flat panel inner umbrella with black blocking outer umbrella. EC60BC 60” White satin flat panel inner umbrella with black blocking outer umbrella. EC32S 32” Silver satin flat panel inn ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 19

    19 General Trouble Shooting COMMON PROBLEMS AND CAUSES Unit does not charge. Probable causes: a. Fuse blown. (Unplug and discharge the unit-Replace fuse.) b. No line power to unit. (Check line cord and outlet.) c. Unit is on, but will not charge. (Safety thermal detector activated by heavy use, beyond specified Flashing Rates on page 9.) d. Unit co ...

  • Photogenic Professional Lighting 1250, 1250DR, 2500DR - page 20

    20 Limited PowerLight Warranty Photogenic Professional Lighting warranties the “standard line” of new PowerLight products to be free from defects in material and workmanship of the PL2 series of PowerLights for a period of two years from date of purchase. At our choice, we will repair or replace any PL2, Solair or Voltage Smart series light tha ...

Manufacturer Photogenic Professional Lighting Category Power Supply

Documents that we receive from a manufacturer of a Photogenic Professional Lighting 1250, 1250DR, 2500DR can be divided into several groups. They are, among others:
- Photogenic Professional Lighting technical drawings
- 1250, 1250DR, 2500DR manuals
- Photogenic Professional Lighting product data sheets
- information booklets
- or energy labels Photogenic Professional Lighting 1250, 1250DR, 2500DR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Photogenic Professional Lighting 1250, 1250DR, 2500DR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Photogenic Professional Lighting 1250, 1250DR, 2500DR, service manual, brief instructions and user manuals Photogenic Professional Lighting 1250, 1250DR, 2500DR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Photogenic Professional Lighting 1250, 1250DR, 2500DR.

Similar manuals

A complete manual for the device Photogenic Professional Lighting 1250, 1250DR, 2500DR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Photogenic Professional Lighting 1250, 1250DR, 2500DR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Photogenic Professional Lighting 1250, 1250DR, 2500DR.

A complete Photogenic Professional Lighting manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Photogenic Professional Lighting 1250, 1250DR, 2500DR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Photogenic Professional Lighting 1250, 1250DR, 2500DR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Photogenic Professional Lighting 1250, 1250DR, 2500DR, that we can find in the current document
3. Tips how to use the basic functions of the device Photogenic Professional Lighting 1250, 1250DR, 2500DR - which should help us in our first steps of using Photogenic Professional Lighting 1250, 1250DR, 2500DR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Photogenic Professional Lighting 1250, 1250DR, 2500DR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Photogenic Professional Lighting 1250, 1250DR, 2500DR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Photogenic Professional Lighting 1250, 1250DR, 2500DR?

Use the form below

If you did not solve your problem by using a manual Photogenic Professional Lighting 1250, 1250DR, 2500DR, ask a question using the form below. If a user had a similar problem with Photogenic Professional Lighting 1250, 1250DR, 2500DR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)