Weider WESY85310の取扱説明書

27ページ 1.07 mb
ダウンロード

ページに移動 of 27

Summary
  • Weider WESY85310 - page 1

    USER’S MANUAL QUESTIONS? As a manufacturer , we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee you complete satisfaction through direct assis- tance from our factory . TO A VOID UNNECESSAR Y DELA YS, PLEASE CALL DIRECT TO OUR T OLL-FREE CUSTOME ...

  • Weider WESY85310 - page 2

    2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBL Y . . . . . . . . . . . ...

  • Weider WESY85310 - page 3

    IMPORT ANT PRECAUTIONS 3 W ARNING: T o reduce the risk of serious injury , read the following important precau- tions before using the weight system. 1. Read all instructions in this manual and in the accompanying literature before using the weight system. Use the weight system only as described in this manual. 2. It is the responsibility of the ow ...

  • Weider WESY85310 - page 4

    4 BEFORE YOU BEGIN ASSEMBLED DIMENSIONS: Height: 74 in. Width: 60 in. Length: 54 in. Foot Plate Low Pulley Station High Pulley Station Lat Bar Leg Lever Butterfly Arms Squat Arm Decal 1 Decal 1 Decal 2 Press Arm Weight Stacks Backrest VKR Arms Weight Pin Thank you for selecting the versatile WEIDER ® 20CT weight system. The WEIDER ® 20CT offers a ...

  • Weider WESY85310 - page 5

    5 Make sure you have the following tools: • T wo adjustable wrenches • One standard screwdriver • One phillips screwdriver • One rubber mallet • Y ou will also need grease or petroleum jelly , a small amount of soapy water , and clear tape or masking tape. Note: Assembly will be more convenient if you have a socket set, a set of open-end ...

  • Weider WESY85310 - page 6

    1. Before beginning assembly , be sure that you have read and understand the information in the box above. Press two 2” Outer Caps (51) onto the indicated locations on the Stabilizer (5). Press two 2” Inner Caps (27) into the indicated ends of the Stabilizer and the Base (4). Insert four 5/16” x 2 1/2” Carriage Bolts (1) up through the Stab ...

  • Weider WESY85310 - page 7

    4. Set two Weight Bumpers (19) on the bracket on the Base (4) as shown. Set two Weight Bumpers on the bracket on the Stabilizer (5). Stack eight Weights (25) onto each set of W eight Bumpers (19). Be sure that the pin grooves are all on the same side of each stack of Weights. Be careful not to tip either stack of Weights (25) until step 6 is comple ...

  • Weider WESY85310 - page 8

    6 8 Lubricate Holes Pin 73 65 63 64 25 6. Press a Weight Tube Bumper (64) into the end of the other Weight Tube (63). Insert the W eight T ube into the rear stack of Weights (25). Be sure that the pins on the Weight T ube are sitting in the pin grooves in the top Weight (refer to step 4). Lubricate the inside of the holes in the other T op Weight ( ...

  • Weider WESY85310 - page 9

    9. Wet the handle of one Press Arm (46) with soapy water . Slide a 5” Plastic Grip (83) onto the han- dle. Press a 1” Round Inner Cap (49) into the other end of the handle. Press a 1 3/4” Inner Cap (44) into the Press Arm. Attach the Press Arm (46) to one side of the Press Frame (17) with two 5/16” x 2 1/2” Bolts (22) and two 5/16” Nylo ...

  • Weider WESY85310 - page 10

    10 12. Press two 1” x 2” Inner Caps (87) into the indicat- ed end of the Squat Arm (84). Attach the Squat Arm (84) to the VKR Upright (74) with a 3/8” x 5 1/2” Bolt (93) and a 3/8” Nylon Locknut (21). Be sure that the indicated brack- et is pointing down as shown. Wet the ends of the Squat Arm (84) with soapy water . Slide the two Squat A ...

  • Weider WESY85310 - page 11

    11 15. Route the Medium Cable (58) around the “V”- Pulley (50) on the Right Arm (48). Be sure that the Cable is in the groove of the Pulley and that the Long Cable T rap (31) is positioned to hold the Cable in place. T ighten the 3/8” x 2 1/2” Bolt (86) and the 3/8” Nylon Locknut (not shown). Route the Medium Cable (58) around the 3 1/2? ...

  • Weider WESY85310 - page 12

    12 19. Route the Short Cable (23) around the 3 1/2” Pulley (15) attached to the upper hole in the Press Frame (17). Be sure that the Cable T rap (66) is in the “3 o’clock” position and that the Cable is routed around the Pulley as shown. T ighten the 3/8” Nylon Locknut (21) and 3/8” x 3 1/2” Bolt (not shown). Route the Short Cable (23 ...

  • Weider WESY85310 - page 13

    13 22. Locate the Long Cable (72). Attach the Long Cable to the other Small “U”-Bracket (71) with a 1/4” Nylon Locknut (2) and a 1/4” W asher (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing. Attach the Small “U”-Bracket (71) to the i ...

  • Weider WESY85310 - page 14

    14 24. Wrap the Long Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable T rap (66) to the Squat Arm (84) with the 3/8” x 2 1/4” Bolt (94) and a 3/8” Jamnut (92). Be sure that the Jamnut is on the side shown and that the Cable T rap is positioned to hold the Cable in place. 24 15 Bracket 84 66 92 94 72 25. See inset drawin ...

  • Weider WESY85310 - page 15

    27. Press a 1 1/2” Inner Cap (32) into the Seat Frame (36). Insert a 1/4” x 2” Carriage Bolt (38) into the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4” x 3/4” Screws (18). Insert the 1/4” x 2” Carriage Bolt (38) through the indicated hole in the Seat Frame (36). T ighten a 1/4” Nylon Lockn ...

  • Weider WESY85310 - page 16

    16 31. Press two 1 1/2” Inner Caps (32) into the ends of the Left and Right VKR Arms (79, 80). Attach the Left and Right VKR Arms (79, 80) to the VKR Upright (74) with two 5/16” x 3” Bolts (75) and two 5/16” Nylon Locknuts (3). 31 VKR ASSEMBL Y 74 79 32 32 3 75 75 80 32. Wet the handle on the Right VKR Arm (80) with soapy water . Slide a 5? ...

  • Weider WESY85310 - page 17

    17 ADJUSTMENTS The instructions below describe how each part of the weight system can be adjusted. Refer to the exercise guide accompanying this manual to see how the weight system should be set up for each exercise. IMPOR- T ANT : When attaching the lat bar or nylon strap, make sure that the attachments are in the correct start- ing position for t ...

  • Weider WESY85310 - page 18

    18 A TT ACHING AND REMOVING THE SEA T T o attach the Seat (13), set the bracket on the Seat Frame (36) onto the indicated pins on the Front Upright (42). Attach the Seat Frame to the Front Upright with the 5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob (40). For some exercises, the Seat (13) must be removed. First, be sure that the chain i ...

  • Weider WESY85310 - page 19

    19 WEIGHT RESIST ANCE CHART This chart shows the approximate weight resistance at each station. “T op” refers to the 6.5 lb. top weight. The other numbers refer to the 12.5 lb. weight plates. The butterfly arm resistance listed is the resistance for each butterfly arm. WEIGHT PRESS ARM BUTTERFL Y ARM LEG LEVER HIGH PULLEY LOW PULLEY SQUA T ARM ...

  • Weider WESY85310 - page 20

    20 TROUBLE-SHOOTING AND MAINTENANCE Make sure all parts are properly tightened each time you use the weight system. Replace any worn parts immedi- ately . The weight system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the weight system, can stret ...

  • Weider WESY85310 - page 21

    21 CABLE DIAGRAM The cable diagram below shows the proper routing of the Long Cable (72), the Medium Cable (58), and the Short Cable (23). Use the diagram to be sure that the three cables and cable traps have been assembled cor- rectly . If the cables have not been correctly routed, the weight system will not function properly and damage may occur ...

  • Weider WESY85310 - page 22

    5/16" Nylon Locknut (3) 1/4" W asher (10) 5/16" W asher (8) 1" Retainer (69) 3/8" W asher (9) 3/8" Nylon Locknut (21) 1/4" x 2" Machine Screw (81) 3/8" Jamnut (92) 1 1/4" x 2 1/2" Plastic Bushing (89) 3/8" x 8" Bolt (59) Cable Clip (53) 1" x 7/8" Plastic Bushing (90) 5/16&qu ...

  • Weider WESY85310 - page 23

    1/4" x 2 1/2" Screw (43) 5/16" x 2 3/4" Carriage Bolt (14) 5/16" x 2 1/2" Carriage Bolt (1) 1/4" x 2" Carriage Bolt (38) 3/8" x 2" Bolt (12) 3/8" x 3 1/2" Bolt (16) 5/16" x 2 1/2" Bolt (22) 3/8" x 2 1/2" Bolt (86) 5/16" x 5" Bolt (68) 3/8" x 3 3/4" B ...

  • Weider WESY85310 - page 24

    1" Round Inner Cap (49) 1" Round Cover Cap (70) 1/2" x 3/4" Spacer (61) 5/16" x 2" Eyebolt (35) 1 1/2" Inner Cap (32) 1 3/4" Inner Cap (44) 2" Inner Cap (27) 2" Outer Cap (51) 1" Inner Cap (6) 1" x 2" Inner Cap (87) 1/2" x 17/32" Spacer (91) 5/8" x 9/16" Spacer (7) ...

  • Weider WESY85310 - page 25

    P ART LIST—Model No. WESY85310 R0901A Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. Key No. Qty . Description 1 6 5/16” x 2 1/2” Carriage Bolt 2 4 1/4” Nylon Locknut 3 27 5/16” Nylon Locknut 4 1 Base 5 1 Stabilizer 6 1 1” Inner Cap 7 1 5/8” x 9/16” Spacer 8 9 5/16” W asher 9 5 ...

  • Weider WESY85310 - page 26

    68 3 20 21 15 66 12 27 83 78 80 75 75 10 81 77 32 83 78 79 3 10 43 74 11 11 3 51 1 1 27 19 51 21 5 25 64 26 12 66 15 63 65 24 2 71 72 3 67 31 50 76 21 56 54 83 83 52 53 39 21 93 92 15 94 84 3 8 8 22 49 82 83 87 85 22 8 8 3 82 83 87 60 27 21 15 55 12 11 8 15 12 44 88 15 58 21 44 21 3 61 62 24 3 58 71 2 65 63 21 15 12 2 57 23 64 25 26 19 21 9 3 3 49 ...

  • Weider WESY85310 - page 27

    ORDERING REPLACEMENT P ARTS T o order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays). T o help us assist you, please be prepared to give the following information: 1. The MODEL NUMBER of the product (WESY85310) 2. The NAME of the pr ...

メーカー Weider カテゴリー Home Gym

Weider WESY85310のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- WESY85310の取扱説明書
- Weiderの製品カード
- パンフレット
- またはWeider WESY85310の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Weider WESY85310の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Weider WESY85310の取り付け説明書、サービスマニュアル、簡易説明書、またはWeider WESY85310のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Weider WESY85310の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Weider WESY85310デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがWeider WESY85310を使用するのを助ける技術的文書のことです。説明書は通常、全てのWeider WESY85310ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Weiderの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Weider WESY85310の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははWeider WESY85310の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Weider WESY85310に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Weider WESY85310デバイスの基本機能を使うにあたってのヒント。 Weider WESY85310のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Weider WESY85310に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるWeider WESY85310のメーカー/サービスへの連絡先に関する情報。

Weider WESY85310についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもWeider WESY85310の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがWeider WESY85310で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)