-
NETGEAR XAVB5602-100NAS - page 1
Powerline 500 Nano PassThru (2-pack) XAVB5602 Installation Guide ...
-
NETGEAR XAVB5602-100NAS - page 2
© 2012 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. DO NOT stack equipment, or place equipment in tight spaces or in drawers. Be sure your equipment ...
-
NETGEAR XAVB5602-100NAS - page 3
3 Package Contents Products sold in some locations include a Resource CD . Ethernet cables (2) Powerline adapters (2) France Germany/Europe Switzerland Your Powerline adapter may look like one of these: ...
-
NETGEAR XAVB5602-100NAS - page 4
4 Hardware Features Filtered AC socket Power LED Powerline LED Ethernet LED Security button Factory Reset button Compatible Powerline and HomePlug AV certified devices include the NETGEAR XAV101, XAV1501, XAV1004, XAV2001, XAV2501, XAV2602 XAVN2001, XAV5001, XAV5004, and XAV5501. For a complete list of HomePlug AV certified devices, go to www.homep ...
-
NETGEAR XAVB5602-100NAS - page 5
5 LEDs The LEDS indicate the status of your Powerline adapters. • When you plug in the adapter, the Power LED lights up and turns green. • The adapter is not active when no Ethernet link has occurred for more than 10 minutes. The adapter enters power saving mode, and the Power LED turns amber. • The Ethernet LED lights up when you connect a p ...
-
NETGEAR XAVB5602-100NAS - page 6
6 Install Your Powerline Adapters ...
-
NETGEAR XAVB5602-100NAS - page 7
You can plug a power strip into the filtered outlet, but do not plug your Powerline adapter into a power strip. The filtered AC socket removes some electrical noise. Plugging a nearby device into the filtered AC socket improves performance. 7 ...
-
NETGEAR XAVB5602-100NAS - page 8
8 Secure Your Powerline Network A Powerline network forms when at least two compatible Powerline devices communicate. After the Powerline network is up and running, you can use the Security buttons on the adapters to add encryption to your Powerline network. CAUTION: Do not press the Security button until each adapter has powered up and its Power L ...
-
NETGEAR XAVB5602-100NAS - page 9
9 Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at http://www.netgear.com/register. Registration is required before you can use the telephone support service. Registration through the NETGEAR website is strongly reco ...
-
NETGEAR XAVB5602-100NAS - page 10
10 Safety Information • For national approvals (approval schemes other than CB), relevant national standards for plug, socket-outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such products according to national standards. • AC input rating (NA): 100–125V, 0.2A (Max); 50–60Hz excluding so ...
-
NETGEAR XAVB5602-100NAS - page 11
11 cord needs to be a maximum of 1 m long and a minimum of 0.75 mm square of cross-sectional area. • Do not plug devices into the XAV5602 filtered AC outlet that exceed the product ratings. The output voltage of the filtered AC outlet is the same as the power outlet that the XAV5602 is plugged into. To help avoid damaging your system, be sure tha ...
-
NETGEAR XAVB5602-100NAS - page 12
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA May 2012 ...
NETGEAR XAVB5602-100NASについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもNETGEAR XAVB5602-100NASの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNETGEAR XAVB5602-100NASで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。