日本語 dropdown-ico

Cisco Systems OL-4858-07の取扱説明書

36ページ 0.32 mb
ダウンロード

ページに移動 of 36

Summary
  • Cisco Systems OL-4858-07 - page 1

    CHAPTER 6-1 Multiprocessor WAN Application Module User Guide OL-4858-07 6 Command Reference This chapter lists new and re vised commands specif ic to the MW AM conf iguration. The commands are categorized according to the console from which the y are executed. Supervisor Console Commands The following commands are a vailable at the Supervisor conso ...

  • Cisco Systems OL-4858-07 - page 2

    6-2 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Processor Control Commands Processor Control Commands The Processor Control (PC) commands are av ailable when you session into MW AM processor 1 from the Supervisor console. The PC commands provide v arious functions for MW AM processors. T o access the PC c ...

  • Cisco Systems OL-4858-07 - page 3

    6-3 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Command Details mwam module allowed-vlan T o conf igure the Ethernet connectivity from the backplane (i.e., switch fabric) to the indi vidual processors on the MW AM, use the mwam module allowed-vlan command in global conf iguration mode. T o ...

  • Cisco Systems OL-4858-07 - page 4

    6-4 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam module vlan-based T o assign MW AM traff ic to a VLAN QoS policy , use the mwam module vlan-based command in global conf iguration mode. T o remove this conf iguration, use the no form of the command. mwam module slot_number port port_nu ...

  • Cisco Systems OL-4858-07 - page 5

    6-5 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details session slot T o establish a command session to a processor on an MW AM, use the session slot command in privile ged EXEC mode. session slot slot_number processor pr ocessor_number Syntax Description Defaults There are no default beha vior or ...

  • Cisco Systems OL-4858-07 - page 6

    6-6 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Tue Oct 14 11:04:43 EDT 2003 Copyright (c) 2002-2003 by cisco Systems, Inc. All rights reserved. Kernel 2.4.10.komodo on an i686 login: root Password: SVCMWAM Image version 2.1(0.1b) Tue Oct 14 11:04:43 EDT 2003 Copyright (c) 2002-2003 by cis ...

  • Cisco Systems OL-4858-07 - page 7

    6-7 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam module T o display connectivity information about the indi vidual processors on the MW AM, use the show mwam module command in pri vileged EXEC mode. show mwam module slot_number port port_number { state | traff ic } Syntax Descript ...

  • Cisco Systems OL-4858-07 - page 8

    6-8 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Last clearing of "show interface" counters never Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 67 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute o ...

  • Cisco Systems OL-4858-07 - page 9

    6-9 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negotiation of Trunking: Off Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Trunking VLANs Enabled: 1-999 Pruning VLANs Enabled: 2-10 ...

  • Cisco Systems OL-4858-07 - page 10

    6-10 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam bootflash access Note The MW AM bootf lash access must be enabled if you want to operate in Supervisor mode. T o enable f ile transfer requests between the Supervisor bootf lash and the individual processors on the MW AM, use the mwam b ...

  • Cisco Systems OL-4858-07 - page 11

    6-11 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details logging listen mwam T o conf igure MW AM logging input to the Supervisor from an MW AM in the chassis, use the logging listen mwam command in global conf iguration mode. T o remov e this conf iguration, use the no form of the command. loggin ...

  • Cisco Systems OL-4858-07 - page 12

    6-12 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details The port numbering pattern is important if you are conf iguring other UDP ports on either the Supervisor or the MW AM processor . Examples The following e xample illustrates the logging listen mwam command: router(config)# logging listen mwa ...

  • Cisco Systems OL-4858-07 - page 13

    6-13 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details execute-on T o initiate a remote command request on an MW AM processor from the Supervisor console, use the execute-on command in pri vileged EXEC mode. execute-on { slot_number | all } { pr ocessor_number | all } command [ subcommand ] Synt ...

  • Cisco Systems OL-4858-07 - page 14

    6-14 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details T o terminate a remote command that is in progress, the user can activ ate the escape sequence def ined on the Supervisor console. For e xample, if a user initiates a log show command on a remote MW AM processor and the command ex ecution is ...

  • Cisco Systems OL-4858-07 - page 15

    6-15 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam module cpu logging T o conf igure the severity le vel of MW AM logging information to send to the Supervisor module, use the mwam module cpu logging command in global conf iguration mode. T o remov e this conf iguration, use the no form ...

  • Cisco Systems OL-4858-07 - page 16

    6-16 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details The following e xample allows the Supervisor console to display deb ugging log messages receiv ed from processor 2 on the MW AM in slot 5: Sup-7600(config)# mwam module 5 cpu 2 logging debug ...

  • Cisco Systems OL-4858-07 - page 17

    6-17 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show logging T o display the slav e log options that are enabled on the MW AM, use the show logging command in privile ged EXEC mode. show logging { slot slot_number | summary } Syntax Description Defaults There are no default beha vior or v ...

  • Cisco Systems OL-4858-07 - page 18

    6-18 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Field descriptions for the output of this command are listed below: Activ e Processor is operational and remote console/logging is acti ve. Online Processor is operational but remote console/logging is not acti ve. Note This state commonly o ...

  • Cisco Systems OL-4858-07 - page 19

    6-19 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details clear logging slot T o clear the slav e log options that are enabled on the MW AM, use the clear logging slot command in privile ged EXEC mode. clear logging slot slot_number counts Syntax Description Defaults There are no default beha vior ...

  • Cisco Systems OL-4858-07 - page 20

    6-20 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show processor T o show status information about an MW AM processor, use the sho w processor command av ailable at the PC complex (processor 1 on the MW AM). show pr ocessor { pr ocessor_number | all } Syntax Description Defaults There are n ...

  • Cisco Systems OL-4858-07 - page 21

    6-21 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details 0% CPU Utilization Messages 4115/4115 VRTC Update(s) acked by PC 244528/244528 Heartbeats(s) acked from IOS 1/1 ROMMON Config Msg(s) acked from ROMMON 0/0 Supervisor Switchover Msg(s) acked from IOS 0/0 Prepare Reload Msg(s) acked from IOS r ...

  • Cisco Systems OL-4858-07 - page 22

    6-22 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show log T o show the upgrade or restart logs, use the sho w log command av ailable at the PC complex (processor 1 on the MW AM). show log { upgrade | r estart } Syntax Description Defaults There are no default beha vior or values. Command M ...

  • Cisco Systems OL-4858-07 - page 23

    6-23 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details reload T o reload processors on an MW AM, use the reload command a vailable at the PC complex (processor 1 on the MW AM). reload { pr ocessor pr ocessor_number | complex complex_number | all } Syntax Description Defaults There are no default ...

  • Cisco Systems OL-4858-07 - page 24

    6-24 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details recover-ios T o set the conf iguration register to boot with a clean conf iguration, use the reco ver-ios command av ailable at the PC complex (processor 1 on the MW AM). reco ver -ios complex_number Syntax Description Defaults There are no ...

  • Cisco Systems OL-4858-07 - page 25

    6-25 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details normal-ios T o set the conf iguration register to boot with a normal conf iguration, use the normal-ios command av ailable at the PC complex (processor 1 on the MW AM). normal-ios Syntax Description Defaults There are no default beha vior or ...

  • Cisco Systems OL-4858-07 - page 26

    6-26 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show images T o list the images stored on the MW AM, use the show images command available at the PC comple x (processor 1 on the MW AM). show images Syntax Description This command has no arguments or k eywords. Defaults There are no defaul ...

  • Cisco Systems OL-4858-07 - page 27

    6-27 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details restore T o restore the pre viously loaded IOS image and ROM-Monitor image, use the r estore command av ailable at the PC complex (processor 1 on the MW AM). restor e Syntax Description This command has no arguments or k eywords. Defaults Th ...

  • Cisco Systems OL-4858-07 - page 28

    6-28 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show tech-support T o display general information about the MW AM and its processors when it reports a problem, use the show tech-support command a vailable at the PC complex (processor 1 on the MW AM). show tech-support Syntax Description T ...

  • Cisco Systems OL-4858-07 - page 29

    6-29 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show version T o display information about the currently loaded software version along with hardw are and device information, use the show version command a vailable at the PC comple x (processor 1 on the MW AM). show version Syntax Descript ...

  • Cisco Systems OL-4858-07 - page 30

    6-30 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam config-mode T o set the MW AM conf iguration f ile storage mode, use the mwam conf ig-mode command in privileged EXEC mode from the MW AM console. mwam conf ig-mode { local | supervisor } Syntax Description Defaults Default setting depe ...

  • Cisco Systems OL-4858-07 - page 31

    6-31 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam config-mode T o sho w the MW AM conf iguration f ile storage mode, use the show mwam conf ig-mode command in privile ged EXEC mode. show mwam conf ig-mode Syntax Description Defaults There are no default beha vior or values. Comman ...

  • Cisco Systems OL-4858-07 - page 32

    6-32 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details logging main-cpu T o conf igure MW AM log redirection to the Supervisor for all ev ents up to a maximum specif ied log lev el, use the logging main-cpu command in global conf iguration mode. T o remov e this conf iguration, use the no form o ...

  • Cisco Systems OL-4858-07 - page 33

    6-33 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details When selecting the UDP port for an MW AM processor , you are def ining a base UDP port used at the Supervisor . T wo additional source ports, based on the selected port, are then automatically def ined. For e xample, on the Supervisor you ha ...

  • Cisco Systems OL-4858-07 - page 34

    6-34 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam T o show MW AM T ransation Look-aside Buf fers (TLBs) and cache errors, use the show mwam command in privile ged EXEC mode. show mwam Syntax Description Defaults There are no default beha vior or values. Command Modes Privile ged E ...

  • Cisco Systems OL-4858-07 - page 35

    6-35 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details 0x21480000:0x214FFFFF 0x001480000:0x0014FFFFF CacheMode=5, RO, Valid 0x21500000:0x2151FFFF 0x001500000:0x00151FFFF CacheMode=5, RO, Valid 0x21520000:0x21527FFF 0x001520000:0x001527FFF CacheMode=5, RO, Valid 0x21528000:0x2152FFFF 0x001528000: ...

  • Cisco Systems OL-4858-07 - page 36

    6-36 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details ...

メーカー Cisco Systems カテゴリー Computer Hardware

Cisco Systems OL-4858-07のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- OL-4858-07の取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems OL-4858-07の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems OL-4858-07の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems OL-4858-07の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems OL-4858-07のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems OL-4858-07の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems OL-4858-07デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems OL-4858-07を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems OL-4858-07ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems OL-4858-07の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems OL-4858-07の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems OL-4858-07に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems OL-4858-07デバイスの基本機能を使うにあたってのヒント。 Cisco Systems OL-4858-07のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems OL-4858-07に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems OL-4858-07のメーカー/サービスへの連絡先に関する情報。

Cisco Systems OL-4858-07についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems OL-4858-07の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems OL-4858-07で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)