-
Grundig cirflexx UMS 5400 DEC - page 1
ǵ HIFI MICRO SYSTEM Cirflexx UMS 5400 DEC DEUTSCH ENGLISH FRANÇAIS IT ALIANO PORTUGUÊS ESP AÑOL ...
-
Grundig cirflexx UMS 5400 DEC - page 2
2 CONTENTS ____________________________________________ 3 Set-up and safety Environmental note 4 Overview The hi-fi system controls The hi-fi system displays The back of the hi-fi system The remote control 13 Connection and preparation 16 Settings Setting the time Setting and storing radio channels Resetting the hi-fi system 19 General functions 21 ...
-
Grundig cirflexx UMS 5400 DEC - page 3
ENGLISH 3 Please note the following information when setting up the system: The hi-fi system is designed for the playback of audio signals. Any other use is expressly prohibited. If you want to set up the hi-fi system on wall shelves or in cupboards, please ensure that it is adequately ventilated. There must be at least 10 cm of space at the side, ...
-
Grundig cirflexx UMS 5400 DEC - page 4
4 The hi-fi system controls Controls on the fr ont General information ON/OFF Switches the hi-fi off and to standby mode. The only way to fully disconnect the hi-fi from the mains supply is to pull the plug out. O Infrared sensor for remote control signals. 0 Headphone jack for con- necting a stereo headphone set with a jack plug (3.5 mm). The loud ...
-
Grundig cirflexx UMS 5400 DEC - page 5
ENGLISH 5 CD mode CD/ ı II Starts and pauses CD play- back. s s In MP3 and CD-DA mode: press briefly to select the next file or the next track; hold down to search for a particular passage. § In MP3 and CD-DA mode: press briefly to select the previous file or the previous track; hold down to search backwards for a particular passage. ■ Interrup ...
-
Grundig cirflexx UMS 5400 DEC - page 6
6 Controls on the top General information PROG./ For setting the time RAND./ Ȅ manually . INTRO/ For setting the REPEA T/ ѕ switch-on timer . UBS Switches the Ultra Bass System on and off. T uner mode PROG./ Press and hold down to RAND./ Ȅ start the automatic station search; press briefly to stop the search; saves radio channels as presets. CD m ...
-
Grundig cirflexx UMS 5400 DEC - page 7
ENGLISH 7 Using external storage media SD/MMC Card slot for inserting a memor y card (SD or MMC) (under the panel). USB USB interface for connecting a USB removeable disc ( MP3 player or USB memor y stick) under the panel. Not suitable for connecting to a PC. Controls on the bottom RESET Resets the hi-fi system. OVER VIEW __________________________ ...
-
Grundig cirflexx UMS 5400 DEC - page 8
8 The hi-fi system displays 000:000 In standby mode: displays the time. In tuner mode: displays the preset channel. In MP3 mode: displays the total number of albums and files, and the elapsed playing time of the current file. In CD-DA mode: displays the total number of tracks, and the elapsed playing time of the current track. 000000.00 In standby ...
-
Grundig cirflexx UMS 5400 DEC - page 9
ENGLISH 9 PROG In tuner mode: a stored radio channel is selected or played. In MP3 and CD-DA mode: a track memor y is created or played back. ɳ In tuner mode: an FM stereo channel is being received. AM Displays the first half of the day in 12-hour format. PM Displays the second half of the day in 12-hour format. kHZ In tuner mode: in combination w ...
-
Grundig cirflexx UMS 5400 DEC - page 10
10 The back of the hi-fi system FM Antenna socket for the ANTENNA rooftop antenna or the wire antenna supplied. MW Antenna socket for ANTENNA connecting the MW frame antenna supplied. R AUX IN L Audio signal input for an external device. SPEAKER Connections for the loud- R +/– L +/– speakers supplied. R = right channel, L = left channel. AC ~ S ...
-
Grundig cirflexx UMS 5400 DEC - page 11
ENGLISH 11 The remote control ON/OFF Switches the hi-fi system to standby mode and from standby mode to the last input source selected. ı II In MP3 and CD-DA mode: starts and pauses CD playback. 7 In MP3 and CD-DA mode: interrupts and stops playback of a CD; deletes the track memor y of a CD. 5 as 6 In tuner mode: selects stored radio channels. In ...
-
Grundig cirflexx UMS 5400 DEC - page 12
12 DISPLA Y In tuner mode: switches the display between frequency , channel name, channel type, radio text and time/day . In CD-DA mode: switches the display between track number/elapsed playing time, remaining track playing time, total remaining running time and time/day . In MP3 mode: switches the display between file number/elapsed playing time, ...
-
Grundig cirflexx UMS 5400 DEC - page 13
ENGLISH 13 Connecting the antennas 1 Plug the rooftop antenna cable into the » FM ANTENNA « antenna socket on the hi-fi. Note: If no rooftop antenna is available, use the auxiliar y antenna supplied. This antenna provides reasonably good reception of local FM (VHF) channels. Do not shorten the auxiliar y antenna. 2 Plug the wire frame antenna int ...
-
Grundig cirflexx UMS 5400 DEC - page 14
14 Inserting batteries in the remote control 1 Open the batter y compartment by pushing down its lid. 2 When inserting the batteries (2 x 1.5 V , R 6/UM 3/AA), obser ve the polarity marked on the base of the batter y com- partment. Note: If your hi-fi system no longer reacts properly to remote control commands, the batteries may be flat. Always rem ...
-
Grundig cirflexx UMS 5400 DEC - page 15
ENGLISH 15 Inserting a memor y card The hi-fi player supports SD and MMC memor y cards. 1 Switch off the hi-fi system. 2 Insert the card carefully into the card slot » SD/MMC « (under the panel on top of the hi-fi), with the contacts facing to the rear until it latches in place. Caution: – Do not use excessive force when inser ting the card. Ap ...
-
Grundig cirflexx UMS 5400 DEC - page 16
16 Setting the time A demo programme starts when you connect the hi-fi system to the mains for the first time. T o end the demo programme switch the hi-fi system to standby by pressing » ON/OFF « briefly . Now the time and day displays will flash, indicating that they need to be set. The following settings may only be performed in standby mode. 1 ...
-
Grundig cirflexx UMS 5400 DEC - page 17
ENGLISH 17 Setting and storing radio channels Automatic station search (ASP) The automatic station search looks for the 40 stations with the best reception and stores them. 1 Start the automatic search in tuner mode by pressing and holding down » PROG./RAND./ Ȅ «. – Display: » FM «, the frequency in rapid run-through and » PROG «. – The ...
-
Grundig cirflexx UMS 5400 DEC - page 18
18 Storing stations as presets 1 Press » TUNER/BAND « to select the frequency band (FM or MW). 2 Press » c TUNING/ALBUM x « to select the station you want to store. 3 Press » PROG./RAND./ Ȅ « to activate the memor y function. – Display: the preset displays » 00 « and » PROG « flash. 4 Select the preset position with » 5 a « or » s 6 ...
-
Grundig cirflexx UMS 5400 DEC - page 19
ENGLISH 19 Switching on and off 1 Switch the hi-fi system on from standby mode by pressing » ON/OFF «. – The last input source used is automatically selected. 2 Press » ON/OFF « to switch the hi-fi system to standby . – Display: » GOOD BYE « briefly , then the current time and day of the week. Note: The only way to disconnect the hi-fi sy ...
-
Grundig cirflexx UMS 5400 DEC - page 20
20 Selecting sound effects Y ou can select from the sound effects USER, CLASSIC, POP , JAZZ and ROCK. The basic setting is USER. 1 Y ou can select sound effects using » DSC «. – Display: » USER «, » CLASSIC X «, » POP C «, » JAZZ V « or » ROCK Y «. Setting the equaliser The USER sound setting allows you to make your own personal equal ...
-
Grundig cirflexx UMS 5400 DEC - page 21
ENGLISH 21 Selecting the TUNER input source 1 Press » FUNCTION « to select the input source. – The most recently selected channel is activated (Last Station Memor y). – Display: e.g. » FM 100.60 « or » ENERGY «. Selecting a preset channel 1 Press » BAND « to select the frequency band (FM or MW). 2 Select the channel position with » 5 a ...
-
Grundig cirflexx UMS 5400 DEC - page 22
22 RDS station service RDS (Radio Data System) is an information system which is transmit- ted additionally by most FM stations. When the hi-fi system is receiving an RDS channel, the channel name, for example » FANTASY «, and » f « appear in the dis- play . Note: It may take some time before all the RDS information is avail- able. Searching fo ...
-
Grundig cirflexx UMS 5400 DEC - page 23
ENGLISH 23 Programme types (PTY) 1 To view the current programme type, press » PTY « on the remote control. – Display: the current programme type, e.g. » NEWS «, » PTY « flashes. – If no programme type code is transmitted, » NO PTY « appears in the display . 2 Press » PTY « repeatedly on the remote control to select another programme ...
-
Grundig cirflexx UMS 5400 DEC - page 24
24 The hi-fi system is suitable for music CDs bearing the logo shown here (CD-DA), and for CD-Rs and CD-RWs with audio data or MP3 formats. In MP3 mode, the terms “album” and “file” are ver y important. “Album” corresponds to a folder on a PC, “file” to a file on a PC or a CD-DA track. The hi-fi system sorts the albums, or the files ...
-
Grundig cirflexx UMS 5400 DEC - page 25
ENGLISH 25 Inserting a CD 1 Press » OPEN/CLOSE « on the top of the hi-fi system to open the CD compartment. – Display: » OPEN «. 2 Place the CD in the compartment with the printed side facing outwards. 3 Press » OPEN/CLOSE « on the top of the hi-fi system to close the CD compartment. – Display: » CD READ « flashes. – In MP3 mode: the ...
-
Grundig cirflexx UMS 5400 DEC - page 26
26 Selecting a different file or track 1 During playback, keep pressing » 5 a « or » s 6 « until the number of the file or track you want appears in the display . – Playback of the selected file or track starts automatically . Note: Y ou can also select files/tracks in stop mode. Searching for a passage or track within a file 1 During playbac ...
-
Grundig cirflexx UMS 5400 DEC - page 27
ENGLISH 27 Repeating a file or a track (Repeat One) 1 Press » ı II « to star t playback. 2 Press » 5 a « or » s 6 « to select the file or track. 3 Select the repeat function by pressing » INTRO/REP ./ ѕ « until » M 1 « appears in the display . – The file or track is played back repeatedly . 4 To quit the function, press » INTRO/REP . ...
-
Grundig cirflexx UMS 5400 DEC - page 28
28 Playing back files or tracks in random order (Random) 1 Press » ı II « to star t playback. 2 Press » PROG./RAND./ Ȅ « to select the function. – Display: » RANDOM «. – The files or tracks on the CD are played back in random order . 3 To quit this function, press » PROG./RAND./ Ȅ «. – Display: » RANDOM « disappears. – The trac ...
-
Grundig cirflexx UMS 5400 DEC - page 29
ENGLISH 29 Creating a track memory Y ou can create a track memor y of up to 60 files on different albums (MP3) or up to 60 tracks (CD-DA) for the current CD in any order you choose and then play them back in that sequence. A file or track may be stored more than once. Programming is only possible in stop mode. Selecting and storing files (MP3 only) ...
-
Grundig cirflexx UMS 5400 DEC - page 30
30 Checking the track memory 1 Press » PROG./RAND./ Ȅ « repeatedly when in stop mode. – The sequence of the stored files or tracks is displayed. Adding files or tracks 1 In the stop position, select the file or track with » 5 a « or » s 6 « and press » PROG./RAND./ Ȅ « to store. Deleting the track memory 1 Open the CD compartment on the ...
-
Grundig cirflexx UMS 5400 DEC - page 31
ENGLISH 31 Playing the contents of a memory card 1 Insert the memor y card carefully into the card slot » SD/MMC « (under the panel on top of the hi-fi), with the contacts facing to the rear . 2 Switch on the hi-fi and use » FUNCTION « to select » SD CARD « as the input source. – Display: » SD READ « flashes, then MP3 mode with the total ...
-
Grundig cirflexx UMS 5400 DEC - page 32
32 Y our hi-fi system has three timer modes: – The switch-on timer , which switches the hi-fi system on at the set time and wakes you with an alarm or music. – The reminder timer , reminding you by sounding the signal tone at a preset time. – The sleep timer , which switches the hi-fi system of f at a preset time. Switch-on timer Setting the ...
-
Grundig cirflexx UMS 5400 DEC - page 33
ENGLISH 33 9 Press » INTRO/REP ./ ѕ « to finish the settings. – Display: » e « or » ɷ «, the day and time. – The hi-fi system switches on at the set time with the selected signal source (maximum alarm duration 90 minutes). Note: The volume of the alarm increases continually from zero onwards until an individually set maximum volume is r ...
-
Grundig cirflexx UMS 5400 DEC - page 34
34 Reminder timer 1 Press » NAP « to select the function. – Display: » NAP 10 « (minimum time setting), » NAP « flashes. 2 Enter the reminder time (in 10 minute inter vals from 10 to 120 minutes) with » NAP «. – Display: » NAP «. – After the set time has expired, a signal tone sounds (for max. 90 minutes). – The display shows the ...
-
Grundig cirflexx UMS 5400 DEC - page 35
ENGLISH 35 Cleaning the CD unit If the device is unable to scan CDs perfectly , use a standard, com- mercially available cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics. To clean CDs use a lint-free cloth and wipe them in a straight line from the centre of the disc outwards. Do not use cleaning fluid for vi ...
-
Grundig cirflexx UMS 5400 DEC - page 36
36 General information on laser devices Y our system is a CLASS 1 LASER PRODUCT . This means that the laser is designed in such a way as to ensure that the maximum permissible emission value cannot be exceeded under any circumstances. Caution: If operating devices or methods other than those specified here are employed, it may lead to danger- ous e ...
-
Grundig cirflexx UMS 5400 DEC - page 37
Grundig Multimedia B.V . Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www .grundig.com ...
Grundig cirflexx UMS 5400 DECについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもGrundig cirflexx UMS 5400 DECの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGrundig cirflexx UMS 5400 DECで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。