Jasco RM94903の取扱説明書

36ページ 0.31 mb
ダウンロード

ページに移動 of 36

Summary
  • Jasco RM94903 - page 1

    Universal Remot e Contr ol RM94903 INS TRUCTION MANU AL 94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 1 ...

  • Jasco RM94903 - page 2

    1 Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Setting Up Y our Universal Remote . . . . . . . . . . . . . . . .3 Programming Y our Universal Remote For: TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 VCR or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7 Cable Box ...

  • Jasco RM94903 - page 3

    2 Button Description Indicator Light Flashes to show that the remote is working. POWER Operates the same as on your original remote. MUTE Operates the same as on your original remote. Device Buttons (TV , VCR/DVD, CBL/AUX) The TV , VCR/DVD and CBL/AUX buttons are used to select the home entertainment device you want to control. VOLUME and CHANNEL O ...

  • Jasco RM94903 - page 4

    3 Setting Up Your Universal Remote Place batteries in the remote 1. Remove the battery compart- ment cover . 2. Place two AAA batteries as shown, matching the + and – end of each battery as indi- cated in the battery compart- ment. 3. Replace the cover . (Some RCA, GE and ProScan devices may alr eady be pre-pr ogrammed. ) 1. Press the button of t ...

  • Jasco RM94903 - page 5

    4 1. Manually turn on the TV . 2. Find the code for your brand in the list starting below . 3. Press and hold the TV but- ton for five (5) seconds, the Indicator Light will light up. 4. Release the TV button. The following buttons stand for each digit of the code: 5. Enter the first digit in the code with the REV button. Example: if the first num- ...

  • Jasco RM94903 - page 6

    5 3 RD CODE NUMBER X TV CODE 7. Enter the third digit in the code with the FOR button the same way as in step 5. If the number is 0, do not press FOR and pr oceed to next step. 8. Press STOP after code is entered and the Indicator Light will turn off. 9. W ith your TV on, press CHANNEL Up. If the TV responds, no further programming is r equired. 10 ...

  • Jasco RM94903 - page 7

    6 Programming VCR or DVD Player Using Code Lists (con’t.) The following buttons stand for each digit of the code: 5. Enter the first digit in the code with the REV button. Example: if the first number is 3, depress the REV button three times. If the number is 0, do not press REV and pr o- ceed to next step. Note: The Indicator Light will blink af ...

  • Jasco RM94903 - page 8

    1. Manually turn on the Cable Box. 2. Find the code for your brand in the list starting on the next page. 3. Press and hold the CBL/AUX button for five (5) seconds, the Indicator Light will light up. 4. Release the CBL/AUX button. The following buttons stand for each digit of the code: 5. Enter the first digit in the code with the REV button. Examp ...

  • Jasco RM94903 - page 9

    8 Note: The Indicator Light will blink after each number is entered. 6. Enter the second digit in the code with the PLA Y button the same way as in step 5. If the number is 0, do not press PLA Y and proceed to next step. 7. Enter the third digit in the code with the FOR button the same way as in step 5. If the number is 0, do not press FOR and pr o ...

  • Jasco RM94903 - page 10

    T urning the TV On and Off. 1. Press TV to set the r emote to control the TV (most RCA, GE and ProScan models will only turn on when pressing TV not power). 2. Press POWER to turn the TV on or off. Change Channels and V olume on the TV . Press VOLUME UP or VOLUME DOWN to change volume on the TV . Press CHANNEL UP or CHAN- NEL DOWN to change chan- n ...

  • Jasco RM94903 - page 11

    10 T urning the DVD Player On and Off. 1. Point the remote at the DVD player and press VCR/DVD . 2. Press POWER to turn the DVD player on or off. 3. Press CHANNEL UP or CHAN- NEL DOWN for DVD SKIP functions. 4. Use REV and FOR for DVD reverse and forwar d func- tions. Operating A DVD Player Operating A VCR T urning the VCR On or Off. 1. Press VCR/D ...

  • Jasco RM94903 - page 12

    11 Operating A VCR Operating A VCR (con’t) 4. Press STOP when you are finished. 5. Press REW to r ewind the tape. 6. Press P AUSE to pause the tape. 7. Press RECORD twice to begin recor ding. 1 . Manually turn on your TV , VCR or Cable Box. 2. Press the Device button (TV , VCR/DVD, or CBL/AUX) for five (5) seconds. The Indicator Light will go on. ...

  • Jasco RM94903 - page 13

    1. Press the Device button (TV , VCR/DVD or CBL/AUX) for five (5) seconds. The Indicator Light will go on. Then release the device button. 2. Then press the Device button (TV , VCR/DVD or CBL/AUX) again. The Indicator Light will go off. Release the device button. 3. For the first digit in the code, press the REV button and count the number of blink ...

  • Jasco RM94903 - page 14

    13 Operating A TV/VCR Combo Unit GE, RCA and ProScan Brand Devices: Many of these devices (TVs and VCRs) do not need to be programmed. In the event that programming is r equired, the code sear ch method is suggested. Note: W ith these brands, the device button (TV , VCR) will usually turn the units on. The OFF/ON button will only turn these devices ...

  • Jasco RM94903 - page 15

    14 Additional Electronic Products For additional electronic pr oducts, check out our web site at www .ge-electronics.com. Lost Y our Codes? Enclosed with this remote is a sticker on which you should write the codes for each device you programmed. Apply the sticker to the back of the remote or somewher e convenient for future r eference. Also on the ...

  • Jasco RM94903 - page 16

    15 Indice Descripción del botón . . . . . . . . . . . .15-16 Arreglo su telecontr ol universal . . . .16-17 Programando su TV telecontr ol universal para: TV . . . . . . . . . . . . . . . . . . . . . . . .17-19 VCR/DVD . . . . . . . . . . . . . . . . .19-21 El rectángulo del cable/AUX . . . .21-23 Funcionamiento del TV . . . . . . . . . . . .23 ...

  • Jasco RM94903 - page 17

    VOLUME and CHANNEL Funcione igual que en su telecontrol origi- nal. Estos botones también se utilizan para introducir el código para su dispositivo. Los botones del VCR Los botones de REV (rebobinado), del PLA Y , del FOR (delantero rápido), de REC (expediente), STOP , y P AUSE controlan las mismas funciones que ésas encontradas en su telecontr ...

  • Jasco RM94903 - page 18

    2. Si el dispositivo se gira, presione otr o botón para confirmar (por ejemplo canal para arriba). 3. Si el dispositivo que usted seleccionó (TV) responde, usted no necesita programar el telecontrol. Si el disposi- tivo que usted seleccionó (TV) no responde, usted necesita programar el tele- control. 4. Relance los pasos de pro- gresión 1-3 par ...

  • Jasco RM94903 - page 19

    18 4. V ersión el botón de la TV . Los botones siguientes están parados para cada dígito del código: 5. Incorpore el primer dígito en el código con el botón de REV . Ejemplo: si el primer número es 3, pr esione el botón de REV tres veces. Si el número es 0, no pr esione REV y proceda al paso de progr esión siguiente. Nota: La luz de ind ...

  • Jasco RM94903 - page 20

    19 8. Presione ST OP después de que se introduzca el código y la luz de indicador darán vuelta apagado. 9. Con su TV encendido, presione CHANNEL para arriba. Si responde la TV , se requier e la programación no adicional. 10. Introducza su código aquí para la refer encia fácil. 1. Gire manualmente el VCR. 2. Encuentre el código para su marca ...

  • Jasco RM94903 - page 21

    20 5. Incorpore el primer dígito en el código con el botón de REV . Ejemplo: si el primer número es 3, pr esione el botón de REV tres veces. Si el número es 0, no pr esione REV y proceda al paso de progr esión siguiente. Nota: La luz de indicador centelleo después de que se incorpore cada númer o. 6. Incorpore el segundo dígito en el cód ...

  • Jasco RM94903 - page 22

    9. Con su VCR encendido, presione CHANNEL para arriba. Si responde el VCR, se requier e la programación no adicional. 10. Introducza su código aquí para la refer encia fácil. 1. Gire manualmente del rectángulo del cable. 2. Encuentre el código para su marca de fábrica en la lista que comienza abajo. 3. Presione y sostenga el botón del CBL/A ...

  • Jasco RM94903 - page 23

    de REV . Ejemplo: si el primer número es 3, pr e- sione el botón de REV tres veces. Si el número es 0, no presione REV y pr oceda al paso de progr esión sigu- iente. Nota: La luz de indicador centelleo después de que se incorpore cada númer o. 6. Incorpore el segundo dígito en el código con el botón del PLA Y la misma manera que en el paso ...

  • Jasco RM94903 - page 24

    23 mación no adicional. 10. Introducza su código aquí para la refer encia fácil. Dando vuelta a la TV por intervalos. 1. Presione la TV para fijar el telecontrol para contr olar la TV (la mayoría de los modelos de RCA, de la GE y de ProScan se girarán solamente cuando presiona el botón TV no POWER. 2. Presione POWER para dar vuelta a la TV e ...

  • Jasco RM94903 - page 25

    Dando vuelta a el rectángu- lo del cable por intervalos. 1. Señale el telecontrol en el rectángulo del cable y pr e- sione CBL/AUX. 2. Presione POWER para darle vuelta encendido o apagado. Cambia canales en el rec- tángulo del cable Presione CHANNEL UP o CHANNEL DOWN para cambiar canales en el rec- tángulo del cable Dando vuelta a el VCR por i ...

  • Jasco RM94903 - page 26

    25 Usar una cinta en su VCR. 1. Gire el VCR. 2. Inserte una cinta en el VCR. 3. Presione PLA Y para encender la cinta. 4. Presione ST OP cuando le acaban. 5. Presione REV para rebobinar la cinta. 6. Presione P AUSE para detenerse brevemente la cinta. 7. Presione RECORD dos veces para comenzar a reg- istrar . Si su TV , VCR/DVD o CBL/AUX no responde ...

  • Jasco RM94903 - page 27

    26 1. Gire manualmente su TV , VCR/DVD o rectángulo del CBL/AUX. 2. Presione el botón del dis- positivo (TV , VCR/DVD o CBL/AUX) por cinco (5) segundos. La luz de indi- cador continuará. Entonces versión el botón del dispos- itivo. 3. Presione y versión POWER hasta que el dis- positivo da vuelta apagado (usted puede tener que relanzar hasta 2 ...

  • Jasco RM94903 - page 28

    Si usted necesita encontrar el código de tres cifras después de que usted haya instalado su telecontrol, utilice este procedimiento. 1. Presione el botón del dis- positivo (TV , VCR/DVD o CBL/AUX) por cinco (5) segundos. La luz de indi- cador continuará. Entonces versión el botón del dispos- itivo. 2. Entonces presione el botón del dispositi ...

  • Jasco RM94903 - page 29

    28 5. Para el tercer dígito en el código, presione el botón del FOR y cuente el número de parpadeos. Nota: si no hay parpadeos, el número es cer o. 6. Introduzca sus códigos aquí para la refer encia. Funcionando una unidad combo de TV/VCR Algúnes unidades del la TV/VCR combi- nación pueden ser controladas usando una combinación de los có ...

  • Jasco RM94903 - page 30

    29 Alerta Baja De la Batería: Cuando sus baterías son débiles, la luz de indicador centelleo indicándola es hora de cambiar las baterías. Garantía Limitada De 90 Días La compañía de Jasco Products autoriza este producto para estar libr e de los defec- tos de producción por un período de noventa días a partir de la fecha original de la c ...

  • Jasco RM94903 - page 31

    30 Los productos electrónicos adicionales Para los productos electrónicos adicionales, controle fuera de nuestr o W eb site en www .ge-electronics.com. ¿Pierda Su Código? Incluida con este telecontrol es una etiqueta engomada en la cual usted debe escribir los códigos para cada dispositivo que usted programó. Aplique la etiqueta engomada a la ...

  • Jasco RM94903 - page 32

    31 CODE LIST 94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 32 ...

  • Jasco RM94903 - page 33

    32 CODE LIST 94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 33 ...

  • Jasco RM94903 - page 34

    33 CODE LIST 94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 34 ...

  • Jasco RM94903 - page 35

    34 CODE LIST 94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 35 ...

  • Jasco RM94903 - page 36

    35 CODE LIST 94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 36 ...

メーカー Jasco カテゴリー Universal Remote

Jasco RM94903のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- RM94903の取扱説明書
- Jascoの製品カード
- パンフレット
- またはJasco RM94903の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Jasco RM94903の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Jasco RM94903の取り付け説明書、サービスマニュアル、簡易説明書、またはJasco RM94903のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Jasco RM94903の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Jasco RM94903デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJasco RM94903を使用するのを助ける技術的文書のことです。説明書は通常、全てのJasco RM94903ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Jascoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Jasco RM94903の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJasco RM94903の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Jasco RM94903に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Jasco RM94903デバイスの基本機能を使うにあたってのヒント。 Jasco RM94903のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Jasco RM94903に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJasco RM94903のメーカー/サービスへの連絡先に関する情報。

Jasco RM94903についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJasco RM94903の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJasco RM94903で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)