-
Kraun KR.XL - page 1
www .kraun.it Wireless Router ADSL2/2+ User’s Manual Cod. KR.XL ...
-
Kraun KR.XL - page 2
www .kraun.it 2 User’s Manual Contents Package contents 3 1. Introduction 3 1.1 Product Overview 3 1.2 Main Features 3 1.3 Conventions 3 2. Hardware Installation 3 2.1 The Front Panel 3 2.2 The Back Panel 4 2.3 Installation Environment 4 2.4 Connecting the Router 4 3. Quick Installation Guide 5 3.1 Configure PC 5 3.2 Login 6 4. Software Configura ...
-
Kraun KR.XL - page 3
www .kraun.it 3 User’s Manual Package contents The following contents should be found in your box: - KR.XL 54M Wireless Router ADSL2/2+ - DC power Adapter for KR.XL ADSL2+ Router - Quick Installation Guide - RJ45 cable - 2 RJ11 cables - ADSL splitter - Resource CD , including: • This User Guide • Other Helpful Information Note: If any of the ...
-
Kraun KR.XL - page 4
www .kraun.it 4 User’s Manual WLAN Off The Wireless function is disabled Slow flash The Wireless function is enabled Quick flash Sending or receiving data over wire- less network LAN(1-4) Off There is no device linked to the cor- responding port On Connected to a device through the corresponding port Flashing Sending or receiving data over cor- r ...
-
Kraun KR.XL - page 5
www .kraun.it 5 User’s Manual 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the KR.XL or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Follow the steps below to configure it. Step 1: Click the Start menu on your desktop, right click My Net ...
-
Kraun KR.XL - page 6
www .kraun.it 6 User’s Manual Now, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd or command in the field and press Enter. Type ping 192.168.1.1 on the next screen, and then press Enter. If the result displayed is similar to the screen belo ...
-
Kraun KR.XL - page 7
www .kraun.it 7 User’s Manual -> Note: If the PVC uses the same VPI/VCI as the default PVCs in factory con- figuration, you will have an Error Message “ERROR: FAIL TO UPDATE DUE TO... Duplicate to a VPI/VCI ! ”. In this condition, please configure the PVC manually. To get detailed information, please refer to 4.3.1. Step 6: Click NEXT to f ...
-
Kraun KR.XL - page 8
www .kraun.it 8 User’s Manual - ATM VC: ATM settings are used to connect to your ISP. Your ISP pro- vides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) set- tings to you. In this Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You need to activate the VC t ...
-
Kraun KR.XL - page 9
www .kraun.it 9 User’s Manual Figure 4-7 - Servicename: Enter a name to mark current connection, or you can leave it blank. - Username: Enter your username for your PPPoE/PPPoA connec- tion. - Password: Enter your password for your PPPoE/PPPoA connec- tion. - Encapsulation: For both PPPoE/PPPoA connection, you need to specify the type of Multiple ...
-
Kraun KR.XL - page 10
www .kraun.it 10 User’s Manual • IGMP Snoop: Enable the IGMP Snoop function if you need. - DHCP Server: Select Enabled, then you will see the screen below (shown in Figure 4 10). The Router will work as a DHCP Server, it be- comes the default gateway for DHCP client connected to it. DHCP stands for Dynamic Host Control Protocol. The DHCP Server ...
-
Kraun KR.XL - page 11
www .kraun.it 11 User’s Manual • 802.11 b/g : In the drop-down list you can select “802.11g (54Mbps)” or “802.11b (11Mbps)”. “802.11 b+g (54Mbps & 11Mbps)”, which al- lows both 802.11g and 802.11b wireless stations to connect to the Router. - Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses ...
-
Kraun KR.XL - page 12
www .kraun.it 12 User’s Manual 4.4 Advanced Setup Choose “Advanced Setup”, you can see the next submenus: Figure 4 17 Click any of them, and you will be able to configure the corresponding function. 4.4.1 Firewall Choose “Advanced Setup->Firewall” menu, and you will see the next screen (shown in Figure 4 18). Figure 4 18 - Firewall: Se ...
-
Kraun KR.XL - page 13
www .kraun.it 13 User’s Manual - DMZ Host IP Address: Enter the specified IP Address for DMZ host on the LAN side. 4.4.3.2 Virtual Server Choose “Advanced Setup->NAT->Virtual Server” in Figure 4 21, you can configure the Virtual Server in the next screen. The Virtual Server is the server or server(s) behind NAT (on the LAN), for example ...
-
Kraun KR.XL - page 14
www .kraun.it 14 User’s Manual Figure 4 25 - QoS: Select this option to Activate/Deactivate the IP QoS on different types (IP ToS and DiffServ). - Summary: Click the button to view the configurations of QoS. - Rule: Configure the rules for QoS. If the traffic complies with the rule, then the Router will take the corresponding action to deal with ...
-
Kraun KR.XL - page 15
www .kraun.it 15 User’s Manual Figure 4 27 - PVID: Each physical port has a default VID called PVID (Port VID). PVID is assigned to untagged frames or priority tagged frames (frames with null (0) VID) received on this port. 2) Define VLAN Group Click Define VLAN Group in Figure 4 26, you can define VLAN groups in the next screen (shown in Figure ...
-
Kraun KR.XL - page 16
www .kraun.it 16 User’s Manual - ACL Rule Index: Select the ACL rule index for the entry. - Active: Enable the ACL rule. - Secure IP Address: Select the IP addresses which are permitted to access to the Router remotely. With the default IP 0.0.0.0, any client would be allowed to remotely access the ADSL Router. - Application: Select the applicati ...
-
Kraun KR.XL - page 17
www .kraun.it 17 User’s Manual Step 1: Select the “IP/MAC Filter” as the Filer Type Selection (show in Figure 4 32). Select the “IP” as the Rule Type on the Filter screen, then you can config- ure the specific rule for the example. Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then select the Interf ...
-
Kraun KR.XL - page 18
www .kraun.it 18 User’s Manual Step 4: Finally, click the SAVE to save the entry. Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address 00-0A-EB-00-07-5F to access the Internet. -> Note: After you complete the MAC filter rules for the example, the Filter list will show as follows. You can enter the IP / MAC Filter Set ...
-
Kraun KR.XL - page 19
www .kraun.it 19 User’s Manual Figure 4 36 - Get Community: Set the password for the incoming Get and Get next requests from the management station. - Set Community: Set the password for incoming Set requests from the management station. 4.5.4 UPnP Choose “Access Management->UPnP”, you can configure the UPnP in the screen (shown in Figure ...
-
Kraun KR.XL - page 20
www .kraun.it 20 User’s Manual 4.6 Maintenance Choose “Maintenance”, you can see the next submenus: Figure 4 40 Click any of them, and you will be able to configure the corresponding function. 4.6.1 Administration Choose “Maintenance->Administration”, you can set new password for admin in the screen (shown in Figure 4 41). Figure 4 41 ...
-
Kraun KR.XL - page 21
www .kraun.it 21 User’s Manual -> Note: 1) New firmware versions are posted at www.Kraun.it and can be downloaded for free. If the router is not experiencing difficulties, there is no need to download a more recent firmware version, unless the version has a new feature that you want to use. 2) When you upgrade the router’s firmware, you may ...
-
Kraun KR.XL - page 22
www .kraun.it 22 User’s Manual Appendix A: Specification General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5 IEEE 802.11b, IEEE 802.11g ,IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, NAT Safety & Emission FCC, CE Ports 4 10/100M Auto-Negotiation RJ45 port, Auto MDI/MDIX) 1 ...
-
Kraun KR.XL - page 23
www .kraun.it 23 User’s Manual ...
Kraun KR.XLについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもKraun KR.XLの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKraun KR.XLで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。