ページに移動 of 56
Author s Network Enabled S olutions Team, Kevin Locklear Contributor Kili Land Deployin g FCoE ( FIP Snoopi ng) on Dell PowerConn ect 10G Sw itches: M8024- k, 8024 and 8024 F A Dell Deploymen t Guide ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 2 This document is for informational p u rposes only and may contain typographical er r ors and technical ina c curacies. The content is provided as is, with out express or i mplied war r an t ies o f any kind. © 2011 - 2012 Dell I nc. All rights re served ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 3 Contents Introduction ........................................................................................................... 6 Basic Termin ology .................................................................................................... 6 F ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 4 Cisco Nexus 5 548UP CLI examp l e .............................................................................. 52 Appendix B - Network Switch V e r s ions ........................................................................... 56 References ........ ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 5 ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 6 Introduction The PowerConnect™ M8024 - k, 8024 and 80 24 F switches are n ow DCB/DCBx c apable with a downloadable update . Start ing w ith firmware 4.2, the latest PowerConnect™ 10 Gigabit switches can now be used as an FCoE Transit S witch (FIP S no ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 7 PFC Priority Flow Control (PFC) , or Per - Priority Pause i s defined in the IEEE 802.1Qb b standard. PFC i s flow control bas e d on priority s ettings and a d d s ad d itional in f or mation to th e standard pau se frame. The additional f ie lds added t ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 8 Configuration s cenarios The following s ections will present very bas ic e x amples of de ploying the 10G switches for FIP Snoopin g and will provide step -by- step e xp l anations of the C LI commands as a guide. The GUI does not cur r e n tly support c ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 9 Important notes pri o r to deplo y me nt No Simple Mode Each of the fol lowing scen ar i os in this docu ment assume that the PowerConnect™ 8024 mode l switch being used is in normal Switch Mode (not Simple Mo de) and is using firmwar e version 4. 2. x. ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 10 Scenario 1: Depl o yi ng th e Dell PowerCo nnect 8 024 Series F SB in a Cisco 5 000 Series Switch (NPIV ) environment T his first exa mple is a basic , single connection betw een devi ces example using the Dell PowerConnect M8024 -k . This configurat ion ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 11 The flowch ar t in Figure 8 is a g e n e r al overvie w of h ow the dep l oyment will oc c ur. This incl u des the basic plann in g that will n e e d t o take place in order for most of the steps in t h e rest of the d ocu ment to fall into place. Genera ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 12 Figure 9 is a gr ap h ical repr e se n t ation of how many of the con f iguration p ie ce s ar e considered parallel settings. M os t of the confi g u r at ion will d e p e n d h eavily on con f igurations b e ing complet ed in more than just one place. ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 13 Configuring th e Dell PowerConne ct M8024 - k,8024, and 8024F for FIP Sn ooping The Dell PowerConnect 8024 model swit ches wil l mo nit or FIP packets and will establish the proper filtering, an d prioritie s f or the FCoE t r a ffic that is pa ssed thro ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 14 Step by Step explanati on of CLI example o Configure – this brings the prompt into the configuration interface o no mode simple – puts switch into n or mal mode o vlan database - moves d o wn into the VLA N dat abase inte r f a ce vlan 20 – add ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 15 o i nterface te1/0/20 – this moves into the inter f a ce te1/0/20 c onfiguration switchport general pvid 20 – est ab l ishes the nat iv e VLAN as 20, you mu st remove V LA N 1 in order for this to functi on correctly switchport general allow ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 16 Configuration overvie w of Dell PowerConnect M8024 - k Figure 9. ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 17 Con figuring the Cisco 5000 se r ies s witch with firmware ver 5.x for a sing le connection from t he Dell PowerConnect M8024 - k or 8024()(F) The CLI comman ds below are nece ssary for an un - configured C isco 5020. The CLI will show ad d it ional line ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 18 The follow in g CLI comman ds are necess ary for an un - conf igured Cisc o Ne xus 5548UP or C i sco Nexus 5596. The full CLI will show additional lines that a re either default or can’t be changed and are not added for thi s example. T h e C LI will a ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 19 St ep by Step explanati on of the CLI example Configure – this brings y ou into the con figuration interface . o feature FCOE – enabl e s t h e feature for FC OE as long as the l icensing an d FC modules are installed . o feature NPIV – enables ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 20 o Zone name blade1 vsan 2 – this will set the name for your zone (blade1 can be any chosen name); vsan 2 will match t he vsan you have cr e ated. Member interface fc2/1 - th is adds the fc2/1 in t erface as a me mber of the zo ne. member pwwn x ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 21 M1000e Chassis Manage ment Controller - > Server Ove rview - > Properties -> Figure 13. WWN/MAC inf ormation for Blade Server 3’s “B” fabric CNA port 2 (B 2). ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 22 Basic Validat ion f or the Cisco Nex us 5000 series switch configurat ion With connect ions made vi a fiber opti c c able or direct connect cabl e (twin - ax) the basi c c onnectivity on the port between the two switches can be verif ied. These cables or ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 23 Check the spanning tree configu r ation. Blocking ports should be understood and when they show in this entry it should be the number expected. Otherwise it could be tha t an unintentional cable loop has been created that will need to be resol ved. Type ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 24 With all cables in place between the switches and the FC /FCoE SAN, use the following command s to validate you r configurati on. First check g eneral statu s of the ports, and links by u sin g: SHOW I NTERFA CE ST ATU S Show interface status r esults Fi ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 25 With the SHOW SPANNIN G - TREE BLOCKEDPORTS command t he status of po r t s t hat may be impa cted by spanning tree can be checked. This is also a good point to make sure that the spanning - tree behaviors are as expect ed, such as Prior ity, which switc ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 26 The follow in g command wi ll show a set of vit al information on the DCBX configuration. T ype: SHOW LLDP DCB X INT ERFACE ALL . The important things to note with this command are that the configuration source sele cted is “True ” and that the conf ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 27 The follow in g command wi ll show a set of v it al information on the DCBX configuration. T ype: SHOW LLDP DCB X INT ERFACE TE 1/0/2 0 DETAIL . This command will sh ow more spec if ic detail ab ou t the configuration that has been negotiated between the ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 28 Finally , after the se val idation step s , go into the di sk management in t erface of t h e se r v e r . I f the SAN is configured appropriatel y the server w ill have an av ailable LUN t o use for stor age. Basic Troubl eshooting Areas Problem Potenti ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 29 Problem Potential Problem Area Potential Fix The VFC entries may no t be present on the Cisco Nexus 5000 series switch Ensure that VFC's are created that will be applicable to the connection. This can be bound to the FCoE- FIP MAC of the CNA or to t ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 30 S cenario 2: Configuring Multiple Uplinks into LAG for Cisco N exus 5000 Series Switch ( NPIV ) Environment Multiple port l ink (LAG) configurat ion between swit ches and storage Figure 23. ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 31 Configuring the Cisc o Nexus 5000 serie s switch with f irmware ver 5.x for a multiple link LAG (link aggregation) connection at the Top - of - Ra ck. The typical s cenario in a b usiness envir onment cons i st s of more than one connection or uplink. Th ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 32 Step by Step explanati on of CLI example (only covering the differences from the single port configuration) o interface vfc1 – selects virtual fc interface vfc1 (vfc1 is an exam ple and can be a different number based on choice at configuration time) ? ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 33 Configuring the M80 24 - k,8024, and 80 24F for FIP Snooping This is an exa mple of the nece s sary CLI comm ands for 8024 mo del switche s configure d with two l in k s in a LAG or port - channel uplin k ed to the Cisco 50 20. This prov ides more bandw ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 34 Step by Step explanati on of Dell PowerConn ect M8024- k CLI example w ith mult iple port (LAG) uplink ( this only cov ers the differenc es from the single p ort configurati on). o interface te1/0/19 – this moves into the interface te1/0/19 configurati ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 35 S cenario 3: Configuring Multiple Uplinks into LAG for Cisco Nexus 5000 Series Switch ( NPV mode) Environme n t Multiple link configuration bet ween switches and storage Figure 26. ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 36 Configuring the Cisc o Nexus 5000 seri es switch with firmwa re ver 5.0(3)N2(2a) in NPV mode for a multiple lin k LAG (link aggregation ) connection from t he Dell PowerCo n nect M8024 - k or 8024 ()( F) The typical s cenario in a b usiness envir onment ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 37 Step by Step explanati on of CLI example for th e Cisco Nexus 5000 Seri es using NPV (only covering the differences from t he single port c onfiguration) o feature NPV – enables the NPV feature which turns off zoning . T he FC side of the Nexu s 5000 s ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 38 F urther notes on ETS / CoS behav ior settings Careful consideration should be taken when establishing the strict priority queues and managing bandwidth re servations. I t FCoE and iSC SI are configu red on the same sw itch and th e se se t tings are use ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 39 Updating f irmware NOTE:. Be sure to check the Releas e Notes and any special in structions t h at may have come with new firmwar e updates. It is i mportant t o follow inst ructions foun d in those do cuments if th e y deviate from this white paper. Ste ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 40 Perform an ot her show version c ommand to con fir m th at the new fir mware has been downloaded to the switch. Not ice that the firmware was copied in to the inactiv e image for e ach member. The current - active colum n now shows th e same values as th ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 41 To validate, l ogin to the s witch and per for m a show version comman d . For the exa mple given the following i s displayed. While downgr ading to a pre v i ous firmw ar e i s supporte d , all features an d f u n ctions that w ere not part of the previ ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 42 3. Enter the IP address of the TFTP serve r into the Server Address field, and enter th e name of the Firmware file into the S ource File Name f ield. 4. If not in th e r oot directory of the TFTP serve r, enter th e p at h of the firmware file. 5. Click ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 43 Also notice that the switch still has the same Current - Active image as before . 8. Under the Next - Active col umn, select t h e n ew image (i. e . image2) for the sw itch or st ack . 9. Click Apply . The Current - Active colum n should now sh ow the o ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 44 Notice that the new firmware (i.e. 4.2.0.4 ) is now the Current - Active image for e ach member. While downgr ading to a pre v i ous firmw ar e i s supporte d , all features an d f u n ctions that w ere not part of the previous firmware will be lost, inc ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 45 Appendix A – F ull CLI ex a mpl es M8024 - k CLI example show running - config !Current Configuration: !System Description "PowerConnect M8024 - k, 4.2.1.3, VxWorks 6.6" !System Software Version 4.2.1.3 !Cut- through mode is configured as dis ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 46 ! interface Te1/0/2 cos- queue min - bandwidth 0 0 0 50 0 0 0 cos- queue strict 3 shutdown spanning - tree port - priority 0 mtu 2500 switchport mode general switchport general pvid 20 switchport general allowed vlan add 20 switchport general allowed vla ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 47 exit ! interface Te1/0/6 cos- queue min - bandwidth 0 0 0 50 0 0 0 cos- queue strict 3 shutdown spanning - tree port - priority 0 mtu 2500 switchport mode general switchport general pvid 20 switchport general allowed vlan add 20 switchport general allowe ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 48 lldp dcbx port - role auto - down exit ! interface Te1/0/10 cos- queue min - bandwidth 0 0 0 50 0 0 0 cos- queue strict 3 shutdown spanning - tree port - priority 0 mtu 2500 switchport mode general switchport general pvid 20 switchport general allowed vl ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 49 switchport general allowed vlan add 1000 tagged switchport general allowed vlan remove 1 lldp dcbx port - role auto - down exit ! interface Te1/0/14 cos- queue min - bandwidth 0 0 0 50 0 0 0 cos- queue strict 3 shutdown spanning - tree port - priority 0 ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 50 mtu 2500 switchport mode general switchport general pvid 20 switchport general allowed vlan add 20 switchport general allowed vlan add 1000 tagged switchport general allowed vlan remove 1 exit ! interface Te1/0/18 cos- queue min - bandwidth 0 0 0 50 0 0 ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 51 switchport general allowed vlan add 1000 tagged switchport general allowed vlan remove 1 mtu 2500 fip- snooping port - mode fcf exit ! interface port - channel 3 mtu 2500 exit ! interface port - channel 4 mtu 2500 exit Skipped port - channel 5 throug ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 52 Cisco Nexus 5548 UP CLI example Technet5548 - 1# show running - config !Command: show running - config !Time: Tue Feb 14 22:47:07 2012 version 5.0(3)N2(2a) feature fcoe feature telnet cfs ipv4 distribute feature lacp feature lldp username admin password ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 53 vlan 1000 fcoe vsan 2 name FCoE_VLAN vsan database vsan 2 interface port - channel2 switchport mode trunk switchport trunk native vlan 20 switchport trunk allowed vlan 1000 interface vfc3 bind mac - address 14:fe:b5:8e:5b:f2 no shutdown interface vfc4 bi ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 54 interface fc1/32 switchport trunk mode on no shutdown interface Ethernet1/1 interface Ethernet1/2 interface Ethernet1/3 interface Ethernet1/4 interface Ethernet1/5 interface Ethernet1/6 interface Ethernet1/7 interface Ethernet1/8 interface Ethernet1/9 in ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 55 interface Ethernet1/25 interface Ethernet1/26 switchport mode trunk switchport trunk native vlan 20 switchport trunk allowed vlan 1000 interface Ethernet1/27 switchport mode trunk switchport trunk native vlan 20 switchport trunk allowed vlan 1000 interfa ...
Deploying FCoE (FIP Snooping) on Dell PowerConnect 10G Switche s: M8024 - k, 8024, and 8024F 56 Appendix B - Network Switch Versions Version info rmation for the ne twork switches us ed in creating t his document are as follows: Switch Firmw are Versions Table 1. Network switch Dell PowerConnect™ M8024k Dell PowerC onnect ™ 8024/8024F C is c o ...
Dell M8024-kのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- M8024-kの取扱説明書
- Dellの製品カード
- パンフレット
- またはDell M8024-kの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Dell M8024-kの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Dell M8024-kの取り付け説明書、サービスマニュアル、簡易説明書、またはDell M8024-kのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Dell M8024-kの製品を使用するにあたって最も人気のある説明書を閲覧できます。
Dell M8024-kデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがDell M8024-kを使用するのを助ける技術的文書のことです。説明書は通常、全てのDell M8024-kユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Dellの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Dell M8024-kの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははDell M8024-kの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Dell M8024-kに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Dell M8024-kデバイスの基本機能を使うにあたってのヒント。 Dell M8024-kのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Dell M8024-kに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるDell M8024-kのメーカー/サービスへの連絡先に関する情報。
Dell M8024-kについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもDell M8024-kの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがDell M8024-kで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。