-
Harbor Freight Tools 67096 - page 1
Visit our website at: http://www .harborfreight.com Email our technical support at: productsupport@harborfreight.com REV 14j Owner ’ s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures. Write the product’ s serial numb ...
-
Harbor Freight Tools 67096 - page 2
Item 67096 For technical questions, please call 1-888-866-5797. Page 2 Safety Alert Symbol and Signal W ords In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid p ...
-
Harbor Freight Tools 67096 - page 3
Item 67096 For technical questions, please call 1-888-866-5797. Page 3 medication. A moment of inattention while operating the tool increases the risk of injury to persons. b. Dress properly . Do not wear loose clothing or jewelry . Contain long hair . Keep hair , clothing, and gloves away from moving parts. Loose clothes, jewelry , or long hair in ...
-
Harbor Freight Tools 67096 - page 4
Item 67096 For technical questions, please call 1-888-866-5797. Page 4 g. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’ s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool i ...
-
Harbor Freight Tools 67096 - page 5
Item 67096 For technical questions, please call 1-888-866-5797. Page 5 Specific Safety Instructions 1. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur . It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but ...
-
Harbor Freight Tools 67096 - page 6
Item 67096 For technical questions, please call 1-888-866-5797. Page 6 SPECIFICA TIONS Maximum Air Pressure 1 15 PSI Air Inlet 1/2″ -14 NPT Drive Size 1″ Square Drive with 6″ extension Maximum Speed* 375 BPM (Blows Per Minute) Average Air Consumption 16.5 CFM @ 90 PSI T orque Range 250-1250 ft-lb * Maximum speed at stated maximum air pressure ...
-
Harbor Freight Tools 67096 - page 7
Item 67096 For technical questions, please call 1-888-866-5797. Page 7 W ARNING! TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Do not install a female quick coupler on the tool. Such a coupler contains an air valve that will allow the air tool to retain pressure and operate accidentally after the air supply is disconnected. Note: Air flow ...
-
Harbor Freight Tools 67096 - page 8
Item 67096 For technical questions, please call 1-888-866-5797. Page 8 3. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. 4. There must not be hazardous objects (such as utility lines) nearby that will present a hazard while working. General Operating Instructions 1. W ARNING! U ...
-
Harbor Freight Tools 67096 - page 9
Item 67096 For technical questions, please call 1-888-866-5797. Page 9 USER-MAINTENANCE INSTRUCTIONS Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn off tool, detach air supply , safely discharge any residual air pressure in tool, an ...
-
Harbor Freight Tools 67096 - page 10
Item 67096 For technical questions, please call 1-888-866-5797. Page 10 T roubleshooting Problem Possible Causes Likely Solutions Decreased output. 1. Not enough air pressure and/ or air ow . 2. Obstructed trigger . 3. Incorrect lubrication or not enough lubrication. 4. Blocked air inlet screen (if equipped). 5. Air leaking from loose housing, h ...
-
Harbor Freight Tools 67096 - page 11
Item 67096 For technical questions, please call 1-888-866-5797. Page 1 1 Part Description Q’ty 1 Oil Seal 1 2 Hammer Case 1 3 Screw 4 4 Spring W asher 4 5 Front Gasket 1 6 Hammer Case Bushing 1 7 Side Plate 1 8 Retainer Ring 1 9 O-ring 1 10 Anvil 1 11 Pin Hammer 1 12 Cam 1 13 Hammer Cage 1 14 Housing 1 15 T rigger 1 16 Spring Pin 1 17 Needle Pin ...
-
Harbor Freight Tools 67096 - page 12
ASSEMBL Y DIAGRAM 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage ...
Harbor Freight Tools 67096についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもHarbor Freight Tools 67096の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHarbor Freight Tools 67096で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。