English dropdown-ico

Manual Harbor Freight Tools 67096

12 pages 0.51 mb
Download

Go to site of 12

Summary
  • Harbor Freight Tools 67096 - page 1

    Visit our website at: http://www .harborfreight.com Email our technical support at: productsupport@harborfreight.com REV 14j Owner ’ s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures. Write the product’ s serial numb ...

  • Harbor Freight Tools 67096 - page 2

    Item 67096 For technical questions, please call 1-888-866-5797. Page 2 Safety Alert Symbol and Signal W ords In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid p ...

  • Harbor Freight Tools 67096 - page 3

    Item 67096 For technical questions, please call 1-888-866-5797. Page 3 medication. A moment of inattention while operating the tool increases the risk of injury to persons. b. Dress properly . Do not wear loose clothing or jewelry . Contain long hair . Keep hair , clothing, and gloves away from moving parts. Loose clothes, jewelry , or long hair in ...

  • Harbor Freight Tools 67096 - page 4

    Item 67096 For technical questions, please call 1-888-866-5797. Page 4 g. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’ s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool i ...

  • Harbor Freight Tools 67096 - page 5

    Item 67096 For technical questions, please call 1-888-866-5797. Page 5 Specific Safety Instructions 1. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur . It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but ...

  • Harbor Freight Tools 67096 - page 6

    Item 67096 For technical questions, please call 1-888-866-5797. Page 6 SPECIFICA TIONS Maximum Air Pressure 1 15 PSI Air Inlet 1/2″ -14 NPT Drive Size 1″ Square Drive with 6″ extension Maximum Speed* 375 BPM (Blows Per Minute) Average Air Consumption 16.5 CFM @ 90 PSI T orque Range 250-1250 ft-lb * Maximum speed at stated maximum air pressure ...

  • Harbor Freight Tools 67096 - page 7

    Item 67096 For technical questions, please call 1-888-866-5797. Page 7 W ARNING! TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Do not install a female quick coupler on the tool. Such a coupler contains an air valve that will allow the air tool to retain pressure and operate accidentally after the air supply is disconnected. Note: Air flow ...

  • Harbor Freight Tools 67096 - page 8

    Item 67096 For technical questions, please call 1-888-866-5797. Page 8 3. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. 4. There must not be hazardous objects (such as utility lines) nearby that will present a hazard while working. General Operating Instructions 1. W ARNING! U ...

  • Harbor Freight Tools 67096 - page 9

    Item 67096 For technical questions, please call 1-888-866-5797. Page 9 USER-MAINTENANCE INSTRUCTIONS Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn off tool, detach air supply , safely discharge any residual air pressure in tool, an ...

  • Harbor Freight Tools 67096 - page 10

    Item 67096 For technical questions, please call 1-888-866-5797. Page 10 T roubleshooting Problem Possible Causes Likely Solutions Decreased output. 1. Not enough air pressure and/ or air ow . 2. Obstructed trigger . 3. Incorrect lubrication or not enough lubrication. 4. Blocked air inlet screen (if equipped). 5. Air leaking from loose housing, h ...

  • Harbor Freight Tools 67096 - page 11

    Item 67096 For technical questions, please call 1-888-866-5797. Page 1 1 Part Description Q’ty 1 Oil Seal 1 2 Hammer Case 1 3 Screw 4 4 Spring W asher 4 5 Front Gasket 1 6 Hammer Case Bushing 1 7 Side Plate 1 8 Retainer Ring 1 9 O-ring 1 10 Anvil 1 11 Pin Hammer 1 12 Cam 1 13 Hammer Cage 1 14 Housing 1 15 T rigger 1 16 Spring Pin 1 17 Needle Pin ...

  • Harbor Freight Tools 67096 - page 12

    ASSEMBL Y DIAGRAM 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage ...

Manufacturer Harbor Freight Tools Category Impact Driver

Documents that we receive from a manufacturer of a Harbor Freight Tools 67096 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 67096 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 67096
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 67096.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 67096, service manual, brief instructions and user manuals Harbor Freight Tools 67096. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 67096.

Similar manuals

A complete manual for the device Harbor Freight Tools 67096, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 67096 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 67096.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 67096 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 67096, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 67096, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 67096 - which should help us in our first steps of using Harbor Freight Tools 67096
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 67096
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 67096 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 67096?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 67096, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 67096 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)