-
Haier HWMP75-918 - page 1
HWMP75-918 Automatic W ashing Machine User manual This manual is for Please read this manual carefully before using. Retain for future reference. ...
-
Haier HWMP75-918 - page 2
CONTENTS 1 2-3 4 5 6 17 7 7 4 15 14 18 Product Overview Safety Precautions Installation and Adjustment Installation of drainage hose Installation of water inlet hoses Before washing Loading your laundry Detergent usage guide Operation & W ash Cycles Maintenance T rouble shooting Packing list Specifications 8-13 ...
-
Haier HWMP75-918 - page 3
Product Overview Detergent box Lint filter Inner tub Pulsater Cabinet Adjustable leg ( 2pieces ) Base frame Power cord Back cover (2 pieces) Fixed leg Bleach Inlet Control panel Hook Lid Lock Drain connector Hot water inlet valve Cold water inlet valve Balance ring Top lid Handle 1 ...
-
Haier HWMP75-918 - page 4
Safety Precautions 2 Back Front Bottom plate Soft object Do not block the ventilation holes with carpet. Ensure carpet does not obstruct the opening under the base of the cabinet. . . . The ventilation holes at the bottom ...
-
Haier HWMP75-918 - page 5
3 Safety Precautions . ...
-
Haier HWMP75-918 - page 6
Back Front Screw Bottom plate Carpet Do not install this machine on an incline greater than 2° . Installing machine on an angle or on rough ground will result in unstable running or stoppage of the machine. Please adjust it by the following method: 1.Confirm it is level ; 2.Lift up the side of the leg slightly and twist the adjustable leg. Note: ...
-
Haier HWMP75-918 - page 7
5 Installation of water inlet hoses ...
-
Haier HWMP75-918 - page 8
6 Bef or e w ashing Check if the laundry has any special washing instructions. Clear the pockets ,and take out loose items such as coins,sand, hairpins etc. T ie any long Straps or strings,fasten buttons and close zippers. The weight of the laundry shall not exceed the rated capacity of your machine Loosen the laundry before placing it evenly in th ...
-
Haier HWMP75-918 - page 9
7 Loading your laundry Detergent usage guide Close the lid It is suggested to dissolve detergent before adding to the tub, see as below: 1. Prepare warm water (<35 C) in a container . 2. Add washing powder , stirring to dissolve it completely . How to use Bleach/whitener Adding washing power During a washing program, the top lid will be activate ...
-
Haier HWMP75-918 - page 10
Lid lock function Spin Rinse Wash Soak T emp 3 Min 5 Min 7 Min 9 Min 1 Rinse 2 Rinses 3 Rinses Express Rapid Medium Long 5 Min 10 Min 20 Min 30 Min Cold/Cold W a r m/ C o ld Hot/Cold Water Level 1 2 3 4 5 6 7 8 Cycle Sy nt het ic Wool T ub dry Memory Heavy Normal Delicate Quick ST ART P AUSE Minutes Remaining Delay(Hours) Minutes Remaining Delay(Ho ...
-
Haier HWMP75-918 - page 11
C/D/E For the “Wool” programs,press the Soak botton, choose or cancel soak process, but can't change the soak time. Soak “Memory/Synthetic/Heavy/Normal” press B “Soak”button A 2,4,6 or 8. 8 The button is unavilable in the “Quick”and“T ub dry”cycles. 2 F G Operation & W ash Cycles 9 ...
-
Haier HWMP75-918 - page 12
H than This cycle setting remembers the last soak,wash, rinse and spin settings(W ater level will not be remembered as it is determined by fuzzy logic function). I J Operation & W ash Cycles 10 ...
-
Haier HWMP75-918 - page 13
11 Button Operation and Descriptions Soak 1 2 Operation & W ash Cycles ...
-
Haier HWMP75-918 - page 14
The wash will finish in about 18 hours. Operation & W ash Cycles 12 ...
-
Haier HWMP75-918 - page 15
Cycle completed When the machine has completed the selected/current wash cycle an audible alarm will sound and the machine will switch off automatically . The energy test program was performed using the "Normal" cycle default setting of: Soak : "20"Min W ash: "Long" Rinse:1 Rinse Spin:7 Min W ater level:8. Please use ...
-
Haier HWMP75-918 - page 16
D is m an tl e In s ta ll Maintenance Remove the power plug before carrying out any cleaning or maintenance. Clean the lint filter(s) and detergent box after each wash. If the cabinet is dirty , wipe it with a damp cloth. Do not wash directly with water . Wipe with a neutral detergent (please check directions on detergent bottle first). Do not wipe ...
-
Haier HWMP75-918 - page 17
Problem Possible causes What to do Is the machine level? Has the laundry been place unevenly in the machine? Are there any foreign objects inside the bowl? Redistribute the load evenly. Close the top lid. Level the machine. Remove the foreign object. T rouble shooting The machine does not drain or drains slowly. The display shows E1. Is the drain h ...
-
Haier HWMP75-918 - page 18
16 . The spinning is intermittent when it starts. Redistribute the load evenly . Close the top lid. The cloth sensor is detecting, it will add water after about 48 seconds. A period of time is needed before the spin program starts. It is the water remaining after the performance inspection by the factory . Select spin program, but it does not work. ...
-
Haier HWMP75-918 - page 19
Bottom plate Tapping screw Inside the accessory bag Inside the accessory bag Inside the accessory bag Inside the accessory bag Inside the accessory bag Components of the water inlet hose User manual Warranty card N am e Quantity Storage position One One One One One One One One Two Inside the document bag Inside the document bag Connect to the washi ...
-
Haier HWMP75-918 - page 20
Part No.0030810251 1/24L 2/34L 3/44L 4/52L 5/60L 6/68L 7/76L 8/85L Specifications HWMP75-918 400W 360W 46 54 L 610 W 620 H 995 Wash Soak Rinse Spin Water level Temp Time Normal Synthetic Delicate Quick Heavy Memory Wool Tub dry Long Rapid Express Medium / 1 Rinse 7 Min 8 106Min Medium 2 Rinses 7 Min 6 57Min 2 Rinses 5 Min 6 46Min 1 Rinse 5 Min 2 10 ...
Haier HWMP75-918についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもHaier HWMP75-918の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHaier HWMP75-918で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。