Zebra P310の取扱説明書

46ページ 1.32 mb
ダウンロード

ページに移動 of 46

Summary
  • Zebra P310 - page 1

    User’s Manual No. 980261-001 Rev. C  2003 ZIH Corp. User’s Guide P310 800-658-8788 www.abcoffice.com abcoffice ...

  • Zebra P310 - page 2

    800-658-8788 www.abcoffice.com abcoffice ...

  • Zebra P310 - page 3

    FOREWORD This manual contains installation and operation information for the P310 Series card printers man - ufactured by Zebra Technologies Corporation. RETURN MATERIALS AUTHORIZATION Before returning any equipment to Zebra Tec hnologies Corporation for in-warranty or out-of-warranty repair, contact Repair Administration for a Return Materials Aut ...

  • Zebra P310 - page 4

    PRODUCT WARRANTY STATEMENT All Zebra Card Printers are warranted against defects in material or workmanship for twelve (12) months from the purchase date. Proof of purchase or shipment date is required to validate the warranty period. The warranty be - comes void if the equipment is modified, improperly installed or used, damaged by accident or ne ...

  • Zebra P310 - page 5

    DECLARATIONS OF CONFORMITY European Council Directive Compliance to Standards 89/336/EEC Modified by 92/31/EEC & 93/61/EEC EMC Directive EN 55022-B, CISPR 22 RF Emissions Control EMC Directive EN 500082-1, IEC 801 Immunity to Electromagnetic Disturbances 73/23/EEC Modified by 93/68/EEC Low Voltage Directive EN60950 Product Safety Model: P310 co ...

  • Zebra P310 - page 6

    P310 PRINTER MODELS Zebra’s Product Numbers tell the story: Here is a quick review of Zebra’s Card Printer Series numbering and lettering system to help you. Zebra’s P310C Plastic Card Printer Series employ Dye Sublimation and Resin Thermal Transfer technologies. Model numbers include identifiers that specify options and items in the Ship-Awa ...

  • Zebra P310 - page 7

    ICONS Throughout this manual, different icons high - light important information, as follows: Important general information Mechanical hazard, such as one associated with moving parts, capable of resulting in equipment damage or personal injury. Electrical hazard, such as an exposed voltage point, capable of causing electrical shock and personal in ...

  • Zebra P310 - page 8

    viii 980261-001 Rev.C Table of Contents ICONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi GETTING STARTED . . . . . . . . . . . . . . . . . . . . . 1 UNPACKING YOUR CARD PRINTER . . . . . . . . . . . . . 1 INDICATORS AND CONTROLS . . . . . . . . . . . . . . . 3 PRINTER INSTALLATION. . . . . . . . . . . . . . . . . . . 4 OPERATION . ...

  • Zebra P310 - page 9

    1 GETTING STARTED UNPACKING YOUR CARD PRINTER Your P310 printer ships in a carton and protec- tive anti-static bag. Keep all packing material in case you need to move or re-ship the printer. While unpacking, inspect the carton to ensure that no damage occurred during shipping. Please ensure that you have a clean and nearly dust free environment for ...

  • Zebra P310 - page 10

    In addition to user documentation, make sure the following items are included with your P310 printer: To reorder, please refer to Appendix C of this manual. 2 980261-001 Rev.C If any items are missin g , please contact your dealer . SW ABS & SA TURA TED CLEANING CARDS CARD OUTPUT HOPPER CARD CARTRIDGE POWER CABLE INTERF ACE CABLE CD ROM (OPTION ...

  • Zebra P310 - page 11

    INDICATORS AND CONTROLS Your P310 Printer has three Status indicators and a panel button on the front and a power switch on the rear: INDICATORS (green, amber & red) signal printer activity by illuminating or flashing, as follows: 980261-001 Rev.C 3 P ANEL BUTTON INDICA T ORS POWER ON OTHER ALERTS P ANEL BUTT ON This is a push button to operate ...

  • Zebra P310 - page 12

    PRINTER INSTALLATION The following will guide you through the instal - lation of your P310 Printer. CAUTION: Limit AC power supplied to the P310 to 110 ~ 230 volts, 60 ~ 50 Hertz, for an associated 680 ~ 280 milliamps. Limit excess current draw to 16 amps or less, using an associ - ated circuit breaker or other such device. Never operate the printe ...

  • Zebra P310 - page 13

    2 OPERATION P310 PRINTER FEATURES The following shows the features found on your P310 Printer: 980261-001 Rev.C 5 PLEASE NO TE: Any blue items inside the printer can be operated by the user . ST ANDARD FEA TURES 1. Print Head 2. Print Head Unlock Lever 3. Manual Holder 4. Card Output Hopper 5. Status Indicators 6. P anel Button 7. Card Cleaning Car ...

  • Zebra P310 - page 14

    LOADING RIBBONS The P310 Printer requires approved ribbons (See Appendix C). The Resin Thermal Transfer and Dye Sublimation ribbons are specifically designed for your P310 Printer. For optimum performance and printer life (Print Head), al - ways use approved ribbons. DO NOT TOUCH the print head or the elec - tronic components on the print head carr ...

  • Zebra P310 - page 15

    Please note that the ribbon automatically synchronizes whenever the print head lock down occurs. 980261-001 Rev.C 7 3. L oad ribbon onto the supply spindle (under print head carriage) and empty core (with tape attached) onto the take-up spindle. Make sure the ribbon comes off of the top of the supply spindle and feeds to the top of the take-up 4. P ...

  • Zebra P310 - page 16

    LOADING CARDS To help you load, print, and collect cards, the P310 has with the following items: DO NOT bend cards or touch print surfaces as this can reduce print quality. The surface of the cards must remain clean and dust free. Always store cards in an enclosed container. Ideally, use cards as soon as possible. If cards stick to - gether, carefu ...

  • Zebra P310 - page 17

    980261-001 Rev.C 9 E* C B A D Install Card Output Hopper onto printer by hooking over bottom edge of card exit aperture. Open Cover , and adjust lever to correct position . R epeat for different card thickness. (F actor y setting is for 30mil (0.762mm) card thickness. See diagram below : B - CARD THICKNESS CONTROL LEVER This item is operated by the ...

  • Zebra P310 - page 18

    FEEDING ONE CARD AT A TIME A Manual Feed Slot is available on the side of the Card Input Hopper for feeding single cards. Cleaning Cards are fed manually throught this slot. The Card Cartridge must be empty for manual card feeding to work properly. REMOVING CARD CARTRIDGE Remove the Card Cartridge prior to packaging the printer for shipment. 10 980 ...

  • Zebra P310 - page 19

    PRINTING A TEST CARD With ribbon and cards loaded, your P310 printer is ready to print. To check the operation of the printer you should print a test card. 980261-001 Rev.C 11 1 2 . Place the printer’s power switch in the OFF (0) position .. . While pressing the panel button , switch printer on . Green indicator will show . 3 . K eep pressing pan ...

  • Zebra P310 - page 20

    12 980261-001 Rev.C 800-658-8788 www.abcoffice.com abcoffice ...

  • Zebra P310 - page 21

    3 PRINTING A SAMPLE CARD Printing with the P310 Printer requires the Win- dows printer driver, the WindCard software, or printer command level programming through the printer interface. The P310 Card Printer can be used with any Windows 95/98 and Windows NT 4.0 software application program, using the drivers provided with the printer. This section ...

  • Zebra P310 - page 22

    TO INSTALL THE P310 PRINTER DRIVER INTO WINDOWS 95, USE THE FOL - LOWING STEPS: 1. Start your computer and then Windows. 2 . Insert either the CD ROM or Diskette containg the Windows Driver into the associated drive. 3 . Under Windows click the Start button, Select Settings , then Printers . 4 . Double-click on the Add Printer icon. The Add Printer ...

  • Zebra P310 - page 23

    3 . Come back to File menu and point Page Setup . 4 . Select Size Tab and in Paper Size choose Card . Then select the orientation: ‘Landscape.’ 5 . Go to Margins Tab , put the top, bottom, left and right margins with 0 values. 6 . Press OK to close Page Setup Window. 7 . The card appears on the screen. 8 . Design a card with both black and colo ...

  • Zebra P310 - page 24

    16 980261-001 Rev.C 800-658-8788 www.abcoffice.com abcoffice ...

  • Zebra P310 - page 25

    4 CLEANING PROTECT YOUR FACTORY WAR - RANTY! The recommended maintenance procedures must be performed to maintain your factory warranty. Other than the recommended cleaning proce- dures described in this manual, allow only Zebra authorized technicians to service the P310 Printer NEVER loosen, tighten, adjust, or bend, etc. a part or cable inside th ...

  • Zebra P310 - page 26

    CLEANING SYSTEM Your P310 Printer includes a simple cleaning system using the Pre-saturated Cleaning Cards provided. The regular use of these cards will clean and maintain important parts of your printer: including the Print Head, Transport Rollers, and Magnetic Encoder Station. Although the amber and red indicators will keep flashing until the cle ...

  • Zebra P310 - page 27

    CLEANING THE PRINT HEAD A cleaning using the Cleaning Cards usually suf - fices. However, a separate Print Head cleaning using swabs can remove more stubborn deposites when print anomolies persist. To avoid deposits, only use foam-tipped swabs. Never use a sharp object to scrape deposites from the print head. Permanent damage will re - sult. 980261 ...

  • Zebra P310 - page 28

    CARD CLEANING CARTRIDGE Your P310 Printer also has a Card Cleaning Cartridge. This item cleans the cards entering the printer. To ensure print quality, the cleaning roller requires periodic replacements. 20 980261-001 Rev.C WHEN TO MAINT AIN When the amber & red indicators flash. (Ever y 1000 cards* approx) *Using 5-panel color ribbon (YMCK O) ...

  • Zebra P310 - page 29

    Although the amber and red indicators will keep flashing until maintenance has been performed, the printer will continue to operate. 980261-001 Rev.C 21 3. Remove Cleaning R oller from Cartridge and discard. 4. Install new Cleaning Roller into Car tridge*. T o avoid contamination , always hold the Cleaning Roller assembly by the ends. 6. 7. T o rep ...

  • Zebra P310 - page 30

    22 980261-001 Rev.C 800-658-8788 www.abcoffice.com abcoffice ...

  • Zebra P310 - page 31

    5 TROUBLESHOOTING The following offers causes or solutions to symptoms related to improper operation. Check this table when experiencing any loss of operation or print quality. Note that the LEDs appear white for ON, dark for OFF, and circled with radial lines for FLASHING. SYMPTOMS / DESCRIPTION REASON / SOLUTION AMBER INDICATOR ILLUMINATES Media ...

  • Zebra P310 - page 32

    RED INDICATOR ILLUMINATES Printer alert: Ribbon Print Head Bracket open Card Jam Ribbon Jam Command Error The printer stops working 1. Check Print Head Bracket is closed. 2. Check if you are using correct card type (see Technical Specifications). 3. Check Card Thickness Control Lever is properly adjusted for correct card thickness (see Chapter 2 - ...

  • Zebra P310 - page 33

    CARDS HAVE ‘SCRATCH LINES’ MISSING PRINTING. Incorrect rolled ribbon Dust Print head There are non-printed horizontal lines (white) on card surfaces. 1. Incorrect position of ribbon. Check rib - bon is properly rolled onto the ribbon core and there are no pleats. 2. There may be dust on the print head (see Chapter 4, Cleaning). 3. An element on ...

  • Zebra P310 - page 34

    26 980261-001 Rev.C 800-658-8788 www.abcoffice.com abcoffice ...

  • Zebra P310 - page 35

    6 TECHNICAL SPECIFICATIONS General • High speed printing, over 140 cards/hour edge to edge in full color (YMCKO) throughput • Small footprint • Easy to use Wind Card Classic utility tool (op- tion) • Windows Drivers for 95 and NT 4.0 (option) • One year printer warranty • One year (100k passes) print head warranty • Powerful EPCL (Zeb ...

  • Zebra P310 - page 36

    • True Type fonts available via Windows Driver and WindCard Classic utility tool (option) Cards* • Types PVC, Composite • Card width/length: ISO CR-80 - ISO 7810, 2.125” (54mm) by 3.385” (86mm) • Option: Magnetic Stripe - ISO 7811 • Option: Smart Card - ISO 7816-2 • Card thickness: 10 mil (0.25mm) to 60 mil (1.524mm) • Card Cartri ...

  • Zebra P310 - page 37

    Ribbons* • Monochrome: 1500 cards/roll • Monochrome colors: black, red, blue, green, sil - ver, gold, white, scratch-off grey • K-resin + O: 800 cards/roll • K-dye + O: 800 cards/roll • YMCKO: 350 cards/roll Overlay Varnish • Thermal transfer • 4 microns thick • Clear and holographic options: - Clear - Genuine/Secure Hologram - Pcar ...

  • Zebra P310 - page 38

    Options • RS-232C serial port • Smart Card Contact Station (30 mil cards only) • Magnetic Encoder (30 mil cards only) • Extended Warranty program • Hot Swap Warranty program • Cleaning supplies • Service Manual • WindCard design software Use only Zebra-approved card and ribbon media. Using non-approved card or ribbon me - dia can vo ...

  • Zebra P310 - page 39

    APPENDIX A - MAGNETIC CARD STRIPE ENCODER Operation and maintenance requirements for the P310 Printer with the optional mag - netic card stripe encoder. (See Chapter 2 for location). The magnetic encoder can be set for either high and low coercivity . ONLY USE cards that comply with ISO 7810 & 7811 standards for magnetic stripe cards. The magne ...

  • Zebra P310 - page 40

    The read/write head requires periodic cleaning to maintain error-free encoding Although the amber and red indicators will keep flashing until the cleaning process has been per- formed, the printer will continue to operate. ISO STANDARD ENCODING Track # Field Separator Track Density Valid Characters # of Characters 1 ^ 210BPI* Alphanumeric (ASCII 20 ...

  • Zebra P310 - page 41

    APPENDIX B - SMART CARD CONTACT STATION This section contains information on the addi - tional operations of the P310 Printers with Smart Card Contact Stations. (See Chapter 2 for location.) INTRODUCTION Smart Cards can have a built-in microcomputer and a battery. Card Memory can store finger - prints, voice recognition patterns, medical re- cords ...

  • Zebra P310 - page 42

    DO NOT position printing over the Smart Card Chip DB-9 PINS SMART CARD CONTACT POINTS DB-9 PINS SMART CARD CONTACT POINTS 1 C1 (Vcc) 6 C6 (Vpp) 2 C2 (Reset) 7 C7 (I/O) 3 C3 (Clock) 8 C8 (RFU) 4 C4 (RFU) 9 (GND when chip is at station) 5 C5 (GND) Refer to the Card Printer Programmer’s Manual for complete programming informa - tion. 34 980261-001 R ...

  • Zebra P310 - page 43

    APPENDIX C - ACCESSORIES & SUPPLIES Please contact your Zebra-authorized dealer to place an order accessories and supplies RIBBONS The following ribbons are optimized for use in the P310 Printers: Monochrome Resin Ribbons (Sold by the Roll) Part Number Description 800015-301 Black - 1500 images 800015-302 Red - 1500 images 800015-303 Green - 15 ...

  • Zebra P310 - page 44

    CARDS The following cards are optimized for use in the P310 Printers: Standard Grade PVC * Part Number Description 104523-101 Card, 10mil (200 pack) 104523-110 Card, 10mil adhesive back (200 pack) 104523-104 Card, 30mil (100 pack) 104523-105 Card, 30mil Low Coercivity Mag. Stripe (100 pack) 104523-106 Card, 30mil High Coercivity Mag. Stripe (100 pa ...

  • Zebra P310 - page 45

    ACCESSORIES Accessories available for P310 Printers appear below. Always refer to the part number when placing an order. Part Number Description 300055-001 Card Printer Parallel/Serial Inter - face Cable, ft. (DB-25 male to DB-25 female) 105536-001 Software CD ROM: WindCard Software, Windows Drivers, Documentation 980261-001 P310 User’s Manual (E ...

  • Zebra P310 - page 46

    World Wide Offices: Zebra Technologies Corporation Card Imaging Division 1001 Flynn Road Camarillo, CA 93012-8706 USA Phone: +1 (805) 579 1800 FAX: +1 (805) 579 1808 e-mail: sales@zebracard.com Zebra Technologies Corporation Card Imaging Division (Europe,Middle East, Africa) The Valley Centre, Gordon Road, High Wycombe Buckinghamshire HP 13 6EQ UK ...

メーカー Zebra カテゴリー Printer

Zebra P310のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- P310の取扱説明書
- Zebraの製品カード
- パンフレット
- またはZebra P310の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Zebra P310の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Zebra P310の取り付け説明書、サービスマニュアル、簡易説明書、またはZebra P310のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Zebra P310の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Zebra P310デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがZebra P310を使用するのを助ける技術的文書のことです。説明書は通常、全てのZebra P310ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Zebraの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Zebra P310の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははZebra P310の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Zebra P310に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Zebra P310デバイスの基本機能を使うにあたってのヒント。 Zebra P310のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Zebra P310に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるZebra P310のメーカー/サービスへの連絡先に関する情報。

Zebra P310についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもZebra P310の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがZebra P310で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)