Dynalink RTA770の取扱説明書

16ページ 0.44 mb
ダウンロード

ページに移動 of 16

Summary
  • Dynalink RTA770 - page 1

    Quick Setup Guide RT A770 ADSL R outer/Modem ...

  • Dynalink RTA770 - page 2

    Impor tant This Guide is intended to get you started quickly . W e have made the factory default setting of this router suitable for Australia 1 . All you need is to follow thr ough the steps we describe here. This Guide should be read in conjunction with the R T A77x Series ADSL Router User’ s Manual 2 . It is provided as a PDF file on this CD. ...

  • Dynalink RTA770 - page 3

    Default Configuration for Austr alia This router is shipped with the following factory default settings. Router IP address 192.168.1.1 Subnet mask 255.255.255.0 VPI 8 VCI 35 Connect mode PPPoA VC-MUX NA T enabled DSL line mode auto select G.DM T / T1.413 WAN I P dynamic DHCP enabled DNS relay on UPnP IGD enabled Firewall incoming on Firewall outgoi ...

  • Dynalink RTA770 - page 4

    Choose from your connection options: 1. Eth erne t (for standalone computer or multiple computers, Operating System independent) The router comes with a built-in 4-port network switch. Up to 4 computers can be connected to the router directly . If you require more connections to more computers, purchase another network hub and connect it to the r o ...

  • Dynalink RTA770 - page 5

    Get your computer r eady for networking The description below assumes you ar e connecting the router via Ethernet. If you are connecting the router via USB, r efer to Chapter 2 - U SB Driver Installation on page 4 of the User’ s Manual on CD. Y ou have two options. F ollowing option (1) is simplest. This is the Windows default network setting. OP ...

  • Dynalink RTA770 - page 6

    Windows 98/ME: 1. From Control Panel , double click Network . Scroll down to highlight TCP/IP - > (your network card) . Click Properties . 2. Select the IP Addr ess tab. Specify 192.168.1 .x (x is a number you pick between 2 and 254 ). This is the IP address you assign to the computer . Subnet Mask is 255.255.255.0 . 3 . Select Gateway tab. Ente ...

  • Dynalink RTA770 - page 7

    STEP 2 ENTER INTERNET ACCOUNT DETAILS Enter your Internet account User Name & Password in the exact format as specified by the ISP . Make sure the page displays "Y our DSL router is r eady to connect" before clicking Connect . See Q2 in Section 10 – T roubleshooting, if after several minutes the message "Y our DSL router is not ...

  • Dynalink RTA770 - page 8

    Configuration for PPP oE ser vice Follow this pr ocedure ONL Y if your I SP specifies the service as PPPoE. Caution - do not set your router to PPPoE mode if your ADSL service is PPPoA. It will not connect. Reset to factory default will restor e router to PPPoA mode. From the Quick Start menu click on Quick Setup to configure for PPPoE. 1. Untick t ...

  • Dynalink RTA770 - page 9

    7 Some adv anced functions of your router Firewall, port forwarding, DMZ & traffic r estrictions By default a preset firewall is invoked to block all incoming requests including Ping from the Internet to your private network. In the reverse direction all requests sent from your network can freely pass through to the Internet. If you want server ...

  • Dynalink RTA770 - page 10

    ADSL R outer Quick Set-up Guide To set up IP extension, go to Advanced > Internet. Click on the "modify icon" under Edit: The next screen displays VPI and VCI as 8 and 35. Do not change these numbers. Go Next. Select PPPoA VC MUX or PPPoE LLC/SNAP . If your ISP did not specify PPPoE you can assume it is PPPoA. Go Next. On the next scre ...

  • Dynalink RTA770 - page 11

    Enter your Internet account user name and password. Go Next. The new configuration is displayed. Click Apply to confirm changes. The router will restart itself to activate the new setting. You will notice all NAT or firewall settings disappear from the Advanced menu hereafter. Now follow Step 2 of Section 5 – Getting On-line. Quality of Service ( ...

  • Dynalink RTA770 - page 12

    ADSL R outer Quick Set-up Guide Indicator lights There are 8 indicators on the fr ont panel. Every time the router is pow ered on or reset, the DIAG light will come on indicating self-test is in progr ess. 9 PWR DIAG LAN1 - LAN4 USB DSL Off Solid Off Flashing Solid Off Flashing Solid Off Flashing Solid Off Flashing Solid Power off. Power on. Power ...

  • Dynalink RTA770 - page 13

    T roubleshooting Q1. Cannot open the router control panel fr om my browser . 1. Check that the router’ s LA N (or USB) light is on. If not, check your Ethernet (or USB) cable. 2. Perform a P ING test . Go to Star t–Programs–MS DOS/Command Pr ompt (In Windows XP or 2000 you may click Star t-Run . Enter cmd then OK ). T ype ping 192.168.1.1 the ...

  • Dynalink RTA770 - page 14

    If there is no designated ADSL jackpoint, any jackpoints may be used. Connect the router directly into a jackpoint, or thr ough the por t marked MODE M on a filter . 2. If the router’ s DSL light is already on, check if router is on line. Go to the Quick Sta r t menu as described in Section 5 – Getting On-line . If the router reports "Y ou ...

  • Dynalink RTA770 - page 15

    Q6. I need to know the dynamically assigned WAN IP when the r outer goes on line Go to Status > Internet Connection, the WA N IP is displayed here. Q.7 How to get information update This Quick Guide and User’ s Manual on CD are the primary source of information about the product. Please check the Dynalink website http://www .dynalink.com.au re ...

  • Dynalink RTA770 - page 16

    AURTA770QG-02 Dynalink warrants this product against defects in materials and workmanship for a period of twelve months fr om the original date of purchase. W e will, at our discretion, repair or r eplace the faulty unit, free of charge, pro vided it is returned to us with proof of purchase fr om an authorised dealer within the warranty period. Ret ...

メーカー Dynalink カテゴリー Modem

Dynalink RTA770のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- RTA770の取扱説明書
- Dynalinkの製品カード
- パンフレット
- またはDynalink RTA770の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Dynalink RTA770の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Dynalink RTA770の取り付け説明書、サービスマニュアル、簡易説明書、またはDynalink RTA770のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Dynalink RTA770の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Dynalink RTA770デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがDynalink RTA770を使用するのを助ける技術的文書のことです。説明書は通常、全てのDynalink RTA770ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Dynalinkの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Dynalink RTA770の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははDynalink RTA770の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Dynalink RTA770に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Dynalink RTA770デバイスの基本機能を使うにあたってのヒント。 Dynalink RTA770のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Dynalink RTA770に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるDynalink RTA770のメーカー/サービスへの連絡先に関する情報。

Dynalink RTA770についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもDynalink RTA770の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがDynalink RTA770で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)