English dropdown-ico

Manual Dynalink RTA770

16 pages 0.44 mb
Download

Go to site of 16

Summary
  • Dynalink RTA770 - page 1

    Quick Setup Guide RT A770 ADSL R outer/Modem ...

  • Dynalink RTA770 - page 2

    Impor tant This Guide is intended to get you started quickly . W e have made the factory default setting of this router suitable for Australia 1 . All you need is to follow thr ough the steps we describe here. This Guide should be read in conjunction with the R T A77x Series ADSL Router User’ s Manual 2 . It is provided as a PDF file on this CD. ...

  • Dynalink RTA770 - page 3

    Default Configuration for Austr alia This router is shipped with the following factory default settings. Router IP address 192.168.1.1 Subnet mask 255.255.255.0 VPI 8 VCI 35 Connect mode PPPoA VC-MUX NA T enabled DSL line mode auto select G.DM T / T1.413 WAN I P dynamic DHCP enabled DNS relay on UPnP IGD enabled Firewall incoming on Firewall outgoi ...

  • Dynalink RTA770 - page 4

    Choose from your connection options: 1. Eth erne t (for standalone computer or multiple computers, Operating System independent) The router comes with a built-in 4-port network switch. Up to 4 computers can be connected to the router directly . If you require more connections to more computers, purchase another network hub and connect it to the r o ...

  • Dynalink RTA770 - page 5

    Get your computer r eady for networking The description below assumes you ar e connecting the router via Ethernet. If you are connecting the router via USB, r efer to Chapter 2 - U SB Driver Installation on page 4 of the User’ s Manual on CD. Y ou have two options. F ollowing option (1) is simplest. This is the Windows default network setting. OP ...

  • Dynalink RTA770 - page 6

    Windows 98/ME: 1. From Control Panel , double click Network . Scroll down to highlight TCP/IP - > (your network card) . Click Properties . 2. Select the IP Addr ess tab. Specify 192.168.1 .x (x is a number you pick between 2 and 254 ). This is the IP address you assign to the computer . Subnet Mask is 255.255.255.0 . 3 . Select Gateway tab. Ente ...

  • Dynalink RTA770 - page 7

    STEP 2 ENTER INTERNET ACCOUNT DETAILS Enter your Internet account User Name & Password in the exact format as specified by the ISP . Make sure the page displays "Y our DSL router is r eady to connect" before clicking Connect . See Q2 in Section 10 – T roubleshooting, if after several minutes the message "Y our DSL router is not ...

  • Dynalink RTA770 - page 8

    Configuration for PPP oE ser vice Follow this pr ocedure ONL Y if your I SP specifies the service as PPPoE. Caution - do not set your router to PPPoE mode if your ADSL service is PPPoA. It will not connect. Reset to factory default will restor e router to PPPoA mode. From the Quick Start menu click on Quick Setup to configure for PPPoE. 1. Untick t ...

  • Dynalink RTA770 - page 9

    7 Some adv anced functions of your router Firewall, port forwarding, DMZ & traffic r estrictions By default a preset firewall is invoked to block all incoming requests including Ping from the Internet to your private network. In the reverse direction all requests sent from your network can freely pass through to the Internet. If you want server ...

  • Dynalink RTA770 - page 10

    ADSL R outer Quick Set-up Guide To set up IP extension, go to Advanced > Internet. Click on the "modify icon" under Edit: The next screen displays VPI and VCI as 8 and 35. Do not change these numbers. Go Next. Select PPPoA VC MUX or PPPoE LLC/SNAP . If your ISP did not specify PPPoE you can assume it is PPPoA. Go Next. On the next scre ...

  • Dynalink RTA770 - page 11

    Enter your Internet account user name and password. Go Next. The new configuration is displayed. Click Apply to confirm changes. The router will restart itself to activate the new setting. You will notice all NAT or firewall settings disappear from the Advanced menu hereafter. Now follow Step 2 of Section 5 – Getting On-line. Quality of Service ( ...

  • Dynalink RTA770 - page 12

    ADSL R outer Quick Set-up Guide Indicator lights There are 8 indicators on the fr ont panel. Every time the router is pow ered on or reset, the DIAG light will come on indicating self-test is in progr ess. 9 PWR DIAG LAN1 - LAN4 USB DSL Off Solid Off Flashing Solid Off Flashing Solid Off Flashing Solid Off Flashing Solid Power off. Power on. Power ...

  • Dynalink RTA770 - page 13

    T roubleshooting Q1. Cannot open the router control panel fr om my browser . 1. Check that the router’ s LA N (or USB) light is on. If not, check your Ethernet (or USB) cable. 2. Perform a P ING test . Go to Star t–Programs–MS DOS/Command Pr ompt (In Windows XP or 2000 you may click Star t-Run . Enter cmd then OK ). T ype ping 192.168.1.1 the ...

  • Dynalink RTA770 - page 14

    If there is no designated ADSL jackpoint, any jackpoints may be used. Connect the router directly into a jackpoint, or thr ough the por t marked MODE M on a filter . 2. If the router’ s DSL light is already on, check if router is on line. Go to the Quick Sta r t menu as described in Section 5 – Getting On-line . If the router reports "Y ou ...

  • Dynalink RTA770 - page 15

    Q6. I need to know the dynamically assigned WAN IP when the r outer goes on line Go to Status > Internet Connection, the WA N IP is displayed here. Q.7 How to get information update This Quick Guide and User’ s Manual on CD are the primary source of information about the product. Please check the Dynalink website http://www .dynalink.com.au re ...

  • Dynalink RTA770 - page 16

    AURTA770QG-02 Dynalink warrants this product against defects in materials and workmanship for a period of twelve months fr om the original date of purchase. W e will, at our discretion, repair or r eplace the faulty unit, free of charge, pro vided it is returned to us with proof of purchase fr om an authorised dealer within the warranty period. Ret ...

Manufacturer Dynalink Category Modem

Documents that we receive from a manufacturer of a Dynalink RTA770 can be divided into several groups. They are, among others:
- Dynalink technical drawings
- RTA770 manuals
- Dynalink product data sheets
- information booklets
- or energy labels Dynalink RTA770
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dynalink RTA770.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dynalink RTA770, service manual, brief instructions and user manuals Dynalink RTA770. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dynalink RTA770.

Similar manuals

A complete manual for the device Dynalink RTA770, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dynalink RTA770 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dynalink RTA770.

A complete Dynalink manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dynalink RTA770 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dynalink RTA770, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dynalink RTA770, that we can find in the current document
3. Tips how to use the basic functions of the device Dynalink RTA770 - which should help us in our first steps of using Dynalink RTA770
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dynalink RTA770
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dynalink RTA770 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dynalink RTA770?

Use the form below

If you did not solve your problem by using a manual Dynalink RTA770, ask a question using the form below. If a user had a similar problem with Dynalink RTA770 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)