日本語 dropdown-ico

Jet J100ECAの取扱説明書

24ページ 0.33 mb
ダウンロード

ページに移動 of 24

Summary
  • Jet J100ECA - page 1

    PORT ABLE FORCED AIR HEA TERS OWNER’S MANUAL J100ECA 100,000 BTU/Hr 100 SIDE PV 002 J150ECA 150,000 BTU/Hr 150 SIDE PV 004 IMPORTANT Read and understand this manual before assembling, starting or servicing heater. Improper use of heater can cause serious injury. Keep this manual for future reference. ...

  • Jet J100ECA - page 2

    2 Safety Information ......................................................................... 3 Product Identification .................................................................... 4 Unpacking ...................................................................................... 5 Assembly .................................................. ...

  • Jet J100ECA - page 3

    3 SAFETY INFORMA TION ! W ARNINGS IMPORTANT: Read this Owner’s Manual carefully and completely before trying to assemble, operate, or service this heater. Improper use of this heater can cause serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning. • Use only kerosene or No. 1 fuel oil to avoid ris ...

  • Jet J100ECA - page 4

    4 PRODUCT IDENTIFICA TION Lower Shell Hot Air Outlet Figure 1 - 100,000 BTU/Hr Model Fuel Cap Side Cover Power Cord Fuel Tank Fan Guard Upper Shell Fuel Cap Fan Guard Figure 2 - 150,000 BTU/Hr Model Hot Air Outlet Lower Shell Power Cord Air Filter End Cover Upper Shell Fuel Tank ...

  • Jet J100ECA - page 5

    5 UNP ACKING 1. Remove all packing items applied to heater for shipment. 2. Remove all items from carton. 3. Check items for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater. ASSEMBL Y These models are furnished with wheels and handles. Wheels, handles, and the mounting hardware are found in the shipping car ...

  • Jet J100ECA - page 6

    6 THEOR Y OF OPERA TION The Fuel System: The air pump forces air through the air line. The air is then pushed through the burner head nozzle. This air causes fuel to lift from the tank. A fi ne mist of fuel is sprayed into the combustion chamber. The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamber. Th ...

  • Jet J100ECA - page 7

    7 VENTILA TION OPERA TION ! W ARNING Follow the minimum fresh, outside air ventilation require- ments. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater. Provide a fresh air opening of at least three square feet (2800 square cm) for each ...

  • Jet J100ECA - page 8

    8 ST ORAGE 1. Drain fuel tank. Note: Locate drain plug on underside of fuel tank. Remove drain plug to drain all fuel. Be sure all fuel is removed. 2. Replace drain plug. 3. Add one gallon (4 liters) of clean kerosene to fuel tank. 4. Attach fuel cap. 5. Move heater forwards and backwards to stir fuel. 6. Remove drain plug and drain fuel tank. Be s ...

  • Jet J100ECA - page 9

    9 TROUBLE- SHOOTING ! W ARNING Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur. Heater burns, but creates puffs of smoke. Heater will not burn steady. Heater burns with odor. Heater smokes continuously. OBSERVED FAULT POSSIBLE CAUSE REMEDY A) Water in fuel B) Wrong fuel Wrong pump pressure ...

  • Jet J100ECA - page 10

    10 150 SHELL REMOVAL EA/EB Euro PFA/P 054 SER VICE PROCEDURES ! W ARNING Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur. Upper Shell Removal 1. Remove screws along each side of heater using 5/16" nut-driver. These screws attach upper and lower shells together. 2. Lift upper shell off ...

  • Jet J100ECA - page 11

    11 Fuel Filter (100,000 BTU/Hr Model) 1. Remove side cover screws using 5/16" nut-driver. 2. Remove side cover. 3. Pull upper fuel line off fuel fi lter neck. 4. Carefully pry bushing, lower fuel line, and fuel fi lter out of fuel tank. 5. Wash fuel fi lter with clean fuel and replace in tank. 6. Attach upper fuel line to fuel fi lter neck ...

  • Jet J100ECA - page 12

    12 Spark Plug 1. Remove upper shell (see page 10). 2. Remove fan (see page 17). 3. Remove spark plug wire from spark plug. 4. Remove spark plug from burner head using 13/16" open-end wrench. 5. Clean and regap spark plug electrodes as follows: .055" (1.4 mm) = 100,000 BTU/Hr model .075" (1.9 mm) = 150,000 BTU/Hr model 6. Install spar ...

  • Jet J100ECA - page 13

    13 125 PRESSURE ADJUSTMENT Plu g Air Output, Air Intake, and Lint Filters 1. Remove upper shell (see page 10). 2. Remove fi lter end cover screws using 5/16" nut- driver. 3. Remove fi lter end cover. 4. Replace air output and lint fi lters. 5. Wash or replace air intake fi lter (see Preventative Maintenance Schedule, page 8). 6. Replace ? ...

  • Jet J100ECA - page 14

    14 Nozzle (100,000 BTU/Hr Model) 1. Remove upper shell (see page 10). 2. Remove fan (see page 17). 3. Remove fuel and air line hoses from burner head. 4. Remove spark plug wire from spark plug. 5. Remove spark plug from burner head using 13/16" open-end wrench. 6. Remove three screws using 5/16" nut-driver and remove burner head from comb ...

  • Jet J100ECA - page 15

    15 Nozzle (150,000 BTU/Hr Model) 1. Remove upper shell (see page 10). 2. Remove fan (see page 17). 3. Remove spark plug wire from spark plug. 4. Remove spark plug from burner head using 13/16" open-end wrench. 5. Loosen fl are nut using 3/4" open-end wrench. Push fuel tube down. 6. Remove air line hose from burner head. 7. Remove three s ...

  • Jet J100ECA - page 16

    16 Pump Rotor (Procedure if rotor is binding) 1. Remove upper shell (see page 10). 2. Remove fi lter end cover screws using 5/16" nut- driver. 3. Remove fi lter end cover and air fi lters. 4. Remove pump plate screws using 5/16" nut- driver. 5. Remove pump plate. 6. Remove rotor, insert, and blades. 7. Check for debris in pump. If debr ...

  • Jet J100ECA - page 17

    17 Fan IMPORTANT: Remove fan from motor shaft before removing motor from heater. The weight of the motor resting on the fan could damage the fan pitch. 1. Remove upper shell (see page 10). 2. Use 1/8" Allen wrench to loosen setscrew which holds fan to motor shaft. 3. Slip fan off motor shaft. 4. Clean fan using a soft cloth moistened with kero ...

  • Jet J100ECA - page 18

    18 WIRING DIAGRAM ACCESSOR Y Output Rating (BTU/Hr) 100,000 150,000 Fuel Use Only Kerosene or No. 1 Fuel Oil Fuel Tank Capacity (U.S. Gal./Liters) 9/34 13.5/51 Fuel Consumption (Gal. Per Hr./Liters Per Hr.) .74/2.8 1.10/4.16 Electric Requirements 120 volt/60 hertz 120 volt/60 hertz Amperage (Normal Run) 4.5 4.5 Hot Air Output (CFM/CMM) 480/13.6 648 ...

  • Jet J100ECA - page 19

    19 ASSEMBLY, EURO PFA/PV 018A 1 2 3 4 5 6 7 WHEELS AND HANDLES FOR 100,000 AND 150,000 BTU/Hr MODELS KEY PART PART 100,000 150,000 NO. NUMBER DESCRIPTION QTY. QTY. 1 HA2203 Handles 2 — HA2205 Handles — 2 2 M12345-33 Screw, #10-24 x 1 3/4" 8 8 3 M12342-3 Wheel Support Frame 1 — M12831-3 Wheel Support Frame — 1 4 NTC-3C Nut Torque, #10-2 ...

  • Jet J100ECA - page 20

    20 PFA/P 010 MOTOR & PUMP 100 EAI/EBI ILLUSTRA TED P ARTS BREAKDOWN 100,000 BTU/Hr Model 13-1 13-2 13-3 13-4 13-5 13-6 13-7 13-8 13-9 13-10 13-11 13-12 13-13 13-15 13-16 13-17 13-18 13-14 Motor and Pump Assembly BURNER HEAD 100 EAI/EBI PFA/P 022 8-2 8-6 8-5 8-4 8-3 8-1 Burner Head Assembly 8-7 1 2 3 8 9 10 11 12 13 14 15 16 17 19 20 25 28 27 29 ...

  • Jet J100ECA - page 21

    21 P ARTS LIST 100,000 BTU/Hr Model This list contains replaceable parts used in your heater. When ordering parts, be sure to provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part. KEY PART PART NO. NUMBER DESCRIPTION QTY. 1 098511-30 Upper Shell 1 2 M15823-27 Screw, #10-16 x 1 ...

  • Jet J100ECA - page 22

    22 BURNER HEAD 150 EAI/EBI PFA/P 028 ILLUSTRA TED P ARTS BREAKDOWN 150,000 BTU/Hr Model 22-1 22-2 22-3 22-4 22-5 22-6 22-7 22-8 22-9 22-10 22-11 22-12 22-13 22-14 22-15 22-16 22-17 22-18 8-7 8-6 8-5 8-4 8-3 8-2 8-1 Burner Head Assembly PFA/P 013 MOTOR & PUMP 150 EAI/EBI Motor and Pump Assembly 8-8 1 2 3 8 9 4 5 7 10 14 15 18 19 20 22 16 17 23 2 ...

  • Jet J100ECA - page 23

    23 This list contains replaceable parts used in your heater. When ordering parts, be sure to provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part. P ARTS LIST 150,000 BTU/Hr Model KEY PART PART NO. NUMBER DESCRIPTION QTY. KEY PART PART NO. NUMBER DESCRIPTION QTY. 1 098511-50 U ...

  • Jet J100ECA - page 24

    24 Printed in U.S.A. 099661-01 Rev. B 8/91 W ARRANTY AND REP AIR SERVICE Contact the Spares and Service Division of: Ludlow Road, Knighton, Powys LD7 1LP Telephone: Knighton (0547) 528534 Telex: 35323 ...

メーカー Jet カテゴリー Electric Heater

Jet J100ECAのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- J100ECAの取扱説明書
- Jetの製品カード
- パンフレット
- またはJet J100ECAの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Jet J100ECAの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Jet J100ECAの取り付け説明書、サービスマニュアル、簡易説明書、またはJet J100ECAのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Jet J100ECAの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Jet J100ECAデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJet J100ECAを使用するのを助ける技術的文書のことです。説明書は通常、全てのJet J100ECAユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Jetの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Jet J100ECAの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJet J100ECAの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Jet J100ECAに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Jet J100ECAデバイスの基本機能を使うにあたってのヒント。 Jet J100ECAのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Jet J100ECAに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJet J100ECAのメーカー/サービスへの連絡先に関する情報。

Jet J100ECAについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもJet J100ECAの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJet J100ECAで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)