ページに移動 of 78
6218 Wireless Router User’ s Guide Document No. 6218-A2-GB20-00 F ebruar y 2005 ...
A February 2005 6218-A2-GB20-00 Copyright © 2005 Paradyne Corporation. All rights reser ved. Printed in U .S.A. Notice This publication is protected b y feder al copyright law . No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retr ie v al system, or translated into any human or comp uter language in ...
6218-A2-GB20-00 February 2005 B Important Safety Instructions 1. Read and follo w all warning notices an d instructions mar ked on the product or i ncluded in the manual. 2. Slots and openings in the cabin et are provided f or ventilatio n. T o ensure reliable operation of the product and to protect it from overheating, these slots and openings mus ...
C February 2005 6218-A2-GB20-00 This equipment has been tested and found to comply with the limits f or a Class B digital de vice, pursuant to P ar t 15 of the FCC Rules. These limi ts are designe d to provide reasonab le protection a gainst har mful interference in a residenti al installation. This equipment generates, uses, and can r adi ate radi ...
6218-A2-GB20-00 February 2005 D Supplier's Declaration of Conf ormity Place of Issue: P aradyne Cor poration 8545 126th A venue North Largo , FL 33773-1502 USA Date of Issue: TBD P aradyne Cor poration, located at the above address , hereby cer tifies that the Model Number 6218-AX-XXX (where X ma y be any numeric character) bearing labeli ng i ...
E February 2005 6218-A2-GB20-00 ...
6218-A2-GB20-00 February 2005 i Contents About This Guide Document Pur pose and Inte nded Audienc e . . . . . . . . . . . . . . . . . . . . v Document Sum mary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Product-Rela ted Docume nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v 1 Intr ...
Contents ii February 2005 6218-A2-GB20-00 New Connect ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 PPPoE Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 PPPoA Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Static Conne ction Set ...
Contents 6218-A2-GB20-00 February 2005 iii Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-44 4 Troubleshooting The Router Is N ot Function al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 You Cannot Connect to the Router . . . . . . . . . . . . . . . . . ...
Contents iv February 2005 6218-A2-GB20-00 ...
6218-A2-GB20-00 February 2005 v About This Guide Document Purpose and Intended A udience This guide contains deta iled inf or mation about the 621 8 wireless router . It is intended for all us ers of th e router . Document Summary A master glossary of terms and acrony ms used in P aradyne documents is av ailable online at www .parad yne .com . Sele ...
About This Guide vi February 2005 6218-A2-GB20-00 ...
6218-A2-GB20-00 February 2005 1-1 1 Intr oduction Def initions Bef ore yo u install or use you r new router , y ou ma y find it helpful to un derstand the f ollowing terms: A bridge is a device that forw ards any messa ge from one pa r t of a ne twork to another . A rou te r is a de vice that f orwards messages accor ding to their network a ...
1. Introduction 1-2 February 2005 6218-A2-GB20-00 Compatibility with vir tually all standard Inter net applications Address filtering and DMZ hosting Downloa dable flash sof tware upg rades Suppor t fo r up to eight P er manent Vir tual Circuits (PVCs) Suppor t f or up to eight PPP oE sessions System Requir ements In order to us ...
1. Introduction 6218-A2-GB20-00 February 2005 1-3 connection is estab lished. Flic kering: a PPP con nection is estab lished and there is acti vity on the link. LAN 1–4 LED: Each LAN LED serves tw o purposes. If the LED is co ntinuously lit, the Ether net inter f ace is succe ssfully connecte d to a device through the LAN por t. If the LED is ...
1. Introduction 1-4 February 2005 6218-A2-GB20-00 ...
6218-A2-GB20-00 February 2005 2-1 2 Hard war e Installation and PC Setup Overview This chapter provides basic instructions for connecting the rout er to a computer or a LAN and to the Inte r net using DSL. The first part provides instructions to set up the hardw are, an d the second par t describes how to pre pare yo ur PC f or use with the router ...
2. Hardware Installation and PC Setup 2-2 February 2005 6218-A2-GB20-00 — If y ou hav e a table-t op adapter , use the A C power cord t o connect the adapter to a w all outlet or po wer strip . The supplied power adapter ma y look di ff erent than the one illustrated here. Figure 2-1. Hardwar e Installation 5. Configure y our router and y our wir ...
2. Hardware Installation and PC Setup 6218-A2-GB20-00 February 2005 2-3 Conf iguring Y our PC’ s IP Address Bef ore you star t to access the router using t he Ether net connection, y ou must configure y our PC to use DHCP , or change y our PC's TCP/IP address to b e 192.168.1.x, wher e x is any number bet ween 2 and 254, with a subnet mask o ...
2. Hardware Installation and PC Setup 2-4 February 2005 6218-A2-GB20-00 4. Ensure that the chec k box to the lef t of the item labeled Internet Protocol (TCP/IP) is chec ked, and clic k on Proper ties. Figure 2-2. Network Connections i n Windo ws XP Figure 2-3. Local Ar ea Connect ion Properties in Wind ows XP ...
2. Hardware Installation and PC Setup 6218-A2-GB20-00 February 2005 2-5 5. In the Internet Protocol (TCP/IP) Prop er ties dialog bo x, click in t he radio b utton labeled “Use the f ollowing IP address” and type 192. 168.1.x (where x is any number bet ween 2 and 254) in the IP Add ress field. T ype 255.255.255.0 in the Subnet Mas k field. Figur ...
2. Hardware Installation and PC Setup 2-6 February 2005 6218-A2-GB20-00 4. If Internet Protocol (TCP/ IP) does not appear as a n installed component, click on I nstall. 5. In the Select Netw ork Component T ype dialog bo x, select Protocol, and then click on A dd. 6. Select Inte r net Protoco l (TCP/IP) in the Networ k Protocols lis t, and then cli ...
2. Hardware Installation and PC Setup 6218-A2-GB20-00 February 2005 2-7 Y ou may be prompted to install f iles from your Windo ws ME installation CD or other media. F ollow the instru ctions to install the files. 8. If prompted, clic k on OK to restar t your computer with t he new settings . 9. After restarting your PC , double-clic k on the Netwo ...
2. Hardware Installation and PC Setup 2-8 February 2005 6218-A2-GB20-00 10. In the TCP/IP Properties dialog bo x, click on th e IP Address tab . 11. Click in the radio button labeled “U se the f ollowing IP address” and type 192.168.1.x (w here x is any number be tween 2 and 254) in the I P Address field. T ype 255.255.25 5.0 in the Subnet Mask ...
6218-A2-GB20-00 February 2005 3-1 3 Using the W eb Interface Logging Into Y our Router T o configure y our router , open y our web brow ser . Ignore any err or about lac king a connection. T ype the def ault IP a ddress (192.168.1.1) in to the Location field of yo ur browser and pr ess the Enter ke y . The follo wing screen appears . Figure 3-1. Lo ...
3. Using the Web Interface 3-2 February 2005 6218-A2-GB20-00 Home Page The first screen ( Figure 3-2 ) that appears after the lo g in screen is the Home page. F rom this screen you can configure the LAN and W AN connection s, configure th e router's security , routing, and filtering, access debugging tools, obtain the status of the router , an ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-3 Figure 3-3. Setup Options Wide Ar ea Network Connection The DSL (L INE) connect ion is the Wide Area Networ k (WAN) connection. It is also ref erred to as a broadband connection. The re quirements f or the W AN connection depend on your In ternet Ser vice P rovider (ISP). Mo st of the con ...
3. Using the Web Interface 3-4 February 2005 6218-A2-GB20-00 Conf iguring the W AN Bef ore the router will pass any data between the LAN interf ace and the W AN interf ace, the W AN side of the router m ust be configured. Depe nding upon yo ur ISP , you will need some or all of the information listed below bef ore yo u can properly configure the W ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-5 New Connection A new conne ction is basically a vir tual connection. Y our router can supp or t up to 8 diff erent vir tual connections. If y ou hav e multiple diff erent vir tual connections, you ma y need to utilize the static and dynamic routing capabilities of the router to pass data ...
3. Using the Web Interface 3-6 February 2005 6218-A2-GB20-00 Idle Timeout - Specifies that PPP oE connection sh ould disconn ect if the link has no activity dete cted f or the specified n umber of seconds . This field is used in conjunction with the On Demand f eature. T o disable the tim eout f eature, enter a zero in this field. A uthenti ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-7 T ools (at the top of the page) and select System Commands . At the System Commands page, click on Sa ve All. PPPoA Connection Setup PPP oA is defined in the Internet standard RFC 2364. It is a method of encapsulating PPP pack ets ov er A TM cells w hich are carried over the DSL line . PP ...
3. Using the Web Interface 3-8 February 2005 6218-A2-GB20-00 P asswor d – The pass word f o r the PPP oA access . This is provided b y you r DSL ser vice provider or y our ISP . Idle Timeout – Specifies that PPP oA connection should disconnect if the link has no activity dete cted f or the specified n umber of seconds . This field is us ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-9 T o complete the connection y ou must no w click t he Apply but ton. The Apply b utton will temporarily sav e this connection. T o make the change pe rmanent, click on T ools (at the top of the page) and select System Commands . At the System Commands page, click on Sa ve All. Static Conn ...
3. Using the Web Interface 3-10 February 2005 6218-A2-GB20-00 Figure 3-6. Static IP Connection Setup T o complete the connection y ou must no w click t he Apply but ton. The Apply b utton will temporarily sav e this connection. T o make the change pe rmanent, click on T ools (at the top of the page) and select System Commands . At the System Comman ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-11 7. Select the encapsula tion type (LLC or VC). If y ou are not sure which to use , just use the def ault mode. 8. Select the quality of ser vice (QOS). Leav e the def ault v alue if your I SP did not provide t his inf or mation. Depending on the QoS y ou select, you ma y also enter: — ...
3. Using the Web Interface 3-12 February 2005 6218-A2-GB20-00 T o configure the router as a bridge: Procedur e 1. F rom the Home page, clic k on Setup and then click on Ne w Connection. The def ault PPP oE connection setup is displa yed. 2. At the T ype field select Bridge . The Bridge connection setup pa ge is displa yed (see Figure 3-8 ). 3. Giv ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-13 T ools (at the top of the page) and select System Commands . At the System Commands page, click on Sa ve All. Modify an Existing Connection T o modify an ex isting connection: Procedur e 1. F rom the Home screen, click on Setup . 2. Click on the connection y ou want to modify . The conne ...
3. Using the Web Interface 3-14 February 2005 6218-A2-GB20-00 The Apply button will tempor arily sav e these settings. T o make the change permanent, click on T ools (at the top of th e page) and select System Commands . At the System Commands page , click on Sa ve All. Conf iguring the LAN T o configure LAN paramete rs, clic k on Setup on the Home ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-15 3. The DHCP server is enab led when “Ena ble DHCP Ser v er” is selected. If you enab le it: — Specify a Start IP address. The Start IP Address is where the DHCP ser ver star ts iss uing IP addr esses. This value must be greater than t he router's IP address v alue. F or exampl ...
3. Using the Web Interface 3-16 February 2005 6218-A2-GB20-00 T o change the router's IP addre ss: Procedur e 1. F rom the Home screen, click on Setup . 2. Under LAN Setup , select LAN Configuration. The L AN Group 1 Configuration screen appears , as shown in Figure 3-10, LAN Group 1 Co nfiguration . 3. Click on “Use the f ollowing Static IP ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-17 Fir ewall/NA T Services T o enable or disable Firewall and NA T: Procedur e 1. F rom the Home screen, click Setup . 2. Under LAN Setup, select Fire wall/NA T Serv ices. By unselecting the Enab le Firew all and NA T Ser vices button the firew all and NA T ser vices is disabled f or all W ...
3. Using the Web Interface 3-18 February 2005 6218-A2-GB20-00 Advanced The CPE suppor ts a host of adv anced f eatures. F or basic router functionality , you do not need to utilize these adv anced feat ures . The fe atures help with routing, security , por t configuration, and plug and play capability . UPnP UPnP NA T and Firew all T rav ersal allo ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-19 SNTP The SNTP screen lets y ou specify parameters related to SNTP (Simple Netw ork Time Protoc ol) ser vers. T o use SNTP: Procedur e 1. F rom the Home screen, clic k on Advanced and under Adv anced, select SNTP . The SNTP screen appears . 2. Enable SNTP and then specify one or more SNTP ...
3. Using the Web Interface 3-20 February 2005 6218-A2-GB20-00 T o configure a ser vice, game , or other application: Procedur e 1. F rom the Home screen, click on Advanced. 2. Under Adv anced, select P or t Forw arding. 3. Select the computer hosting the ser vice and add the corre sponding fire wall rul e. 4. If yo u want to add a custo m applicati ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-21 IP Filters Use the IP Filters screen to b lock all or sele cted traffic. T o set up IP Filters: Procedur e 1. F rom the Home screen, click on Advanced and under Advan ced, select IP Filters. The IP Filters screen appears . 2. Select the LAN Group from the drop-down list that these change ...
3. Using the Web Interface 3-22 February 2005 6218-A2-GB20-00 LAN Clients T o ad d a LAN clie nt, or rese r ve an IP address for a DHCP client: Procedur e 1. F rom the Home screen, click on Advanced. 2. Under Advanced, select LAN Clients . If DHCP is used, all DHCP clients are automatically assigned. If a fixed IP address server is on the LAN and y ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-23 The Apply button will tempor arily sav e these settings. T o make the change per manent, click on T ools and select System Commands. On the System Commands page, click on Sa ve All. Figure 3-18. VLAN Bridge Filters The bridge filtering mechanism provides a wa y for the users to define ru ...
3. Using the Web Interface 3-24 February 2005 6218-A2-GB20-00 be used to delete the en tire filter rule. It pro vides a quick met hod of selecting all filter rules for deletion. The Enab le Bridge Filters button allows y ou to enable or disab le br idge filtering. It can be set or unse t during any add, edit, or delete operatio n. It can also be se ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-25 W eb Filters This option enab les the IGMP prox y , which allows NA T clients to par ticipate in IGMP multicast gr oups. It should only be enabled if NA T is also enabled . T o enable Multicas ting: Procedur e 1. F rom the Home screen, click on Advanced. 2. Under Adv anced, select W eb F ...
3. Using the Web Interface 3-26 February 2005 6218-A2-GB20-00 Multicast This option enab les the IGMP prox y , which allows NA T clients to par ticipate in IGMP multicast gr oups. It should only be enabled if NA T is also enabled . T o enable Multicas ting: Procedur e 1. F rom the Home screen, click on Advanced. 2. Under Advanced, select Muliticast ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-27 IGMP Snooping Use the IGMP Snooping screen to specify whether IGMP Snooping is enab led. When IGMP Snooping is en abled, the r outer analyzes In ter net Group Management Proto col (IGMP) pac kets to learn multicast group address and port associations. T o enable IGM P Snooping: 1. F rom ...
3. Using the Web Interface 3-28 February 2005 6218-A2-GB20-00 3. Specify the New Destination IP . This is the address of the remot e LAN network or host to which y ou want to assign a static r oute. Enter t he IP address of the host f or which yo u wish to create a static route here . F or a standard Class C IP domain, the netw ork address is the f ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-29 3. Specify th e Protocol. The protoco l is dependent upon the e ntire networ k. Most networks suppor t RIP v1. If RIP v1 is se lected, routing data will be sent in RIP v1 f or mat. If RIP v2 is selec ted, rout ing data will be sent in RIP v2 format using subnet broadcas ting. If Rip v1 C ...
3. Using the Web Interface 3-30 February 2005 6218-A2-GB20-00 Access Control Access contro l allows cer tain PC s to access th e router after the firewall is enabled. Access control is enab led on a W AN conn ection only if the firewall is enab led globally (see Firewa ll/NA T Ser vices on page 3-17) and ena bled on tha t W AN connection. T o enabl ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-31 Wi re l e s s The Wireless tab pro vides access to screens that let y ou configure paramet ers related to t he router’ s wireless LAN conn ection. Setup The Wireless Setup screen contains th e wireless LAN user settings . T o ch ange the Wirele ss Setup: Procedur e 1. F rom the Home sc ...
3. Using the Web Interface 3-32 February 2005 6218-A2-GB20-00 The Apply button will tempor arily sav e these settings. T o make the change permanent, click on T ools (at the top of th e page) and select System Commands . At the System Commands pa ge, clic k on Sav e All. Then turn off and turn on the router to put the settings into eff ect. Channel ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-33 Conf iguration The Wireless Configur ation screen contains th e wireless LAN opera tional settings . Do not change an ything on the Wireless Configu ration screen unless y ou are so directed b y your ISP . T o view the Wireless Configur ation setting s: Procedur e 1. F rom the Home scree ...
3. Using the Web Interface 3-34 February 2005 6218-A2-GB20-00 Figure 3-28. W ireless Security Scr een 3. Select a security type: — None. An yone can connect to the wire less LAN. — WEP (Wired Equiv alent Privac y). Users of the wireless LAN m ust supply an encryption ke y , as defined on this screen. If an Auth entication T ype of Shared is se ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-35 the address of the RADIUS server , the P or t, the shared Secret , and the Interval in seconds at which auth entication must be repeated. Figure 3-30. Wir eless Security 802.11x Screen — WP A (Wi-Fi Protected Access). For WP A you can specify a RADIUS ser ver (as with 802.1x, abov e) o ...
3. Using the Web Interface 3-36 February 2005 6218-A2-GB20-00 Management The Wireless Management screen allows y o u to control access, displa y clients, and establish m ultiple SSIDs. T o use Wire less Mana gement: Procedur e 1. F rom the Home screen, click on the Wireless tab . 2. F rom the Wireless menu, clic k on Management. The Wire less Manag ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-37 — Associated Stations – T o display wire less clients curren tly connected to the router. Figure 3-33. Wir eless Management Associated Stations Screen — Multiple SSIDs – T o cause the router to adv er tise the wireless LAN using more than one Service Set IDentifier (SSID). Figure ...
3. Using the Web Interface 3-38 February 2005 6218-A2-GB20-00 To o l s The T ools tab provides access to system com mands and functions. Figure 3-35. T ools Screen System Commands T o make changes p er manent, clic k on T ools (at the top of the page) and sele ct System Commands . The f ollowing co mmands are used to configure th e router: Sav ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-39 Figure 3-36. System Commands Remote Log The remote log f eature fo rwards all logged inf or mation to a remote PC . The type of inf ormation forw arded to the remote PC depends upon the log le vel. Each log message is assigned a se verity le v el, which indicates ho w seriously the trigg ...
3. Using the Web Interface 3-40 February 2005 6218-A2-GB20-00 T o forward logging information: Procedur e 1. Click on T ools and select Remote Log. 2. Select a Log Le vel from the d rop-down list. 3. T ype the IP address of the remot e logging destination an d click on Add. 4. Click on Apply . T o make the change per manent, click on T ools (at the ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-41 If you f orget your password, you can press a nd hold the reset to factory defaults button f or 10 s econds. The r outer will be reset to its f a ctor y default configur ation and all custom configurations will be lost. Figure 3-38. User Management Update Gateway Y ou can remotely upgr a ...
3. Using the Web Interface 3-42 February 2005 6218-A2-GB20-00 Figure 3-39. Update Gateway Ping T est Once y ou hav e your rou ter configured, it is a good idea to mak e sure you can ping the network. If you ha ve y our PC connected to the router via the def ault DHCP configuratio n, you should be able to ping the network address 192. 168.1.2. If y ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-43 Figure 3-40. Ping T est Modem T est The Modem T est is used to ch eck whether your router is proper ly connec ted to the W AN Network by running O AM F4 and F5 end-to-e nd and segment test s. The te st ma y take a f ew seconds to complete. T o perform th e test, select your connection fr ...
3. Using the Web Interface 3-44 February 2005 6218-A2-GB20-00 Status The Statu s section allo ws you to view th e Status/Statistics of diff erent connections and interf aces: Network Statistics – Select to vie w the Statistics of the Ethernet and DSL interf aces, as shown in F igure 3-42 . Figure 3-42. Network Statistics Connection Status ...
3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-45 Product Inf or mation – Select to vie w the router's drive r and run-time inf or mation, as shown in Figure 3-44 . Figure 3-44. Product Inf ormation System Log – Select to vie w all logged inf or mation. Depending upon the se verity le vel, this logged inf or mation w il ...
3. Using the Web Interface 3-46 February 2005 6218-A2-GB20-00 ...
6218-A2-GB20-00 February 2005 4-1 4 T r oubleshooting The Router Is Not Functional 1. Chec k to see that the po wer LED is green and th an the network cabl es are installed correctly . Refer to Co nnecting the Hardw are in Chapter 2, Hardware Installation and PC Setup for more details. 2. Chec k to see that the LAN and ST A TUS LEDs are green. 3. C ...
4. Troubleshooting 4-2 February 2005 6218-A2-GB20-00 PC , type ipconfig /all (or winipcfg /a ll on Windows 95, 98, or ME) at a command prompt to determine the IP address of y our network adapter . Mak e sure that it is within the sa me 192.168.1.x subnet. Y our PC's subnet mask must match th e router's subnet mask. The route r has a def a ...
6218-A2-GB20-00 February 2005 A-1 A T erminology What is a Fir ewall? A fire wall is protection betw een the Internet and your local netw ork. It acts as the fire wall in y our car does , protecting the int erior of the car from the engine . Y our car's firew all has very small opening that allow desired connections f rom the engine into the c ...
A. Terminology A-2 February 2005 6218-A2-GB20-00 Y our machine isn't really directly connected to the Int er net, and it really has an internal local network address . When you pro vide the server 's network address to others , you actu ally provide the add ress of the router . The rout er fa kes the connection to your machine. Y ou shoul ...
6218-A2-GB20-00 February 2005 IN-1 Index A About This Guide, v Access Control, 3-30 ADSL, 1-1 ADSL2+, 1-1 Advanced, 3-18 Advanced F eatures, 3 -18 Assigning IP Address using DHCP, 2-3 B Back Panel, 1-2 Bridge, 1-1 Connection, 3-11 Filters, 3-23 Bridge Filters, 3-23 Bridged Connection, 3-11 C Cables Installing, 2-1 CE Marking, B Changing IP address, ...
Index IN-2 February 2005 6218-A2-GB20-00 L LAN Clients, 3-22 Configuring, 3-14 Connection, 3-3 LED, 1-3 ports, connecting, 2-1 LED Blinking in a Sequential Pattern, 4-2 Description, 1-2 Link, 1-2 Status L ED continues to blink, 4-2 Link LED, 1 -2 Local Area Network Connecti on, 3-3 Logging In, 3 -1 Logging Out, 3-30 M Modem Setup, 3-13 Test, 3-43 M ...
Index 6218-A2-GB20-00 February 2005 IN-3 User Management, 3-40 Username, 3-1 V VLAN, 3-22 W WAN Configuring, 3-4 Connection, 3-3 Warranty, Sales, Service, and Training Information , A Web filters, 3-25 Web Interface, using, 3 -1 Wide Area Network Connection, 3-3 Windows 2000, 2-5 95, 98, 2-7 ME, 2 -6 NT 4.0, 2-8 XP, 2-3 ...
Index IN-4 February 2005 6218-A2-GB20-00 ...
Paradyne 6218のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 6218の取扱説明書
- Paradyneの製品カード
- パンフレット
- またはParadyne 6218の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Paradyne 6218の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Paradyne 6218の取り付け説明書、サービスマニュアル、簡易説明書、またはParadyne 6218のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Paradyne 6218の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Paradyne 6218デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがParadyne 6218を使用するのを助ける技術的文書のことです。説明書は通常、全てのParadyne 6218ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Paradyneの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Paradyne 6218の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははParadyne 6218の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Paradyne 6218に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Paradyne 6218デバイスの基本機能を使うにあたってのヒント。 Paradyne 6218のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Paradyne 6218に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるParadyne 6218のメーカー/サービスへの連絡先に関する情報。
Paradyne 6218についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもParadyne 6218の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがParadyne 6218で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。