Manual Paradyne 6218

78 pages 1.33 mb
Download

Go to site of 78

Summary
  • Paradyne 6218 - page 1

    6218 Wireless Router User’ s Guide Document No. 6218-A2-GB20-00 F ebruar y 2005 ...

  • Paradyne 6218 - page 2

    A February 2005 6218-A2-GB20-00 Copyright © 2005 Paradyne Corporation. All rights reser ved. Printed in U .S.A. Notice This publication is protected b y feder al copyright law . No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retr ie v al system, or translated into any human or comp uter language in ...

  • Paradyne 6218 - page 3

    6218-A2-GB20-00 February 2005 B Important Safety Instructions 1. Read and follo w all warning notices an d instructions mar ked on the product or i ncluded in the manual. 2. Slots and openings in the cabin et are provided f or ventilatio n. T o ensure reliable operation of the product and to protect it from overheating, these slots and openings mus ...

  • Paradyne 6218 - page 4

    C February 2005 6218-A2-GB20-00 This equipment has been tested and found to comply with the limits f or a Class B digital de vice, pursuant to P ar t 15 of the FCC Rules. These limi ts are designe d to provide reasonab le protection a gainst har mful interference in a residenti al installation. This equipment generates, uses, and can r adi ate radi ...

  • Paradyne 6218 - page 5

    6218-A2-GB20-00 February 2005 D Supplier's Declaration of Conf ormity Place of Issue: P aradyne Cor poration 8545 126th A venue North Largo , FL 33773-1502 USA Date of Issue: TBD P aradyne Cor poration, located at the above address , hereby cer tifies that the Model Number 6218-AX-XXX (where X ma y be any numeric character) bearing labeli ng i ...

  • Paradyne 6218 - page 6

    E February 2005 6218-A2-GB20-00 ...

  • Paradyne 6218 - page 7

    6218-A2-GB20-00 February 2005 i Contents About This Guide  Document Pur pose and Inte nded Audienc e . . . . . . . . . . . . . . . . . . . . v  Document Sum mary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v  Product-Rela ted Docume nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v 1 Intr ...

  • Paradyne 6218 - page 8

    Contents ii February 2005 6218-A2-GB20-00  New Connect ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 PPPoE Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 PPPoA Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Static Conne ction Set ...

  • Paradyne 6218 - page 9

    Contents 6218-A2-GB20-00 February 2005 iii  Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-44 4 Troubleshooting  The Router Is N ot Function al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1  You Cannot Connect to the Router . . . . . . . . . . . . . . . . . ...

  • Paradyne 6218 - page 10

    Contents iv February 2005 6218-A2-GB20-00 ...

  • Paradyne 6218 - page 11

    6218-A2-GB20-00 February 2005 v About This Guide Document Purpose and Intended A udience This guide contains deta iled inf or mation about the 621 8 wireless router . It is intended for all us ers of th e router . Document Summary A master glossary of terms and acrony ms used in P aradyne documents is av ailable online at www .parad yne .com . Sele ...

  • Paradyne 6218 - page 12

    About This Guide vi February 2005 6218-A2-GB20-00 ...

  • Paradyne 6218 - page 13

    6218-A2-GB20-00 February 2005 1-1 1 Intr oduction Def initions Bef ore yo u install or use you r new router , y ou ma y find it helpful to un derstand the f ollowing terms:  A bridge is a device that forw ards any messa ge from one pa r t of a ne twork to another .  A rou te r is a de vice that f orwards messages accor ding to their network a ...

  • Paradyne 6218 - page 14

    1. Introduction 1-2 February 2005 6218-A2-GB20-00  Compatibility with vir tually all standard Inter net applications  Address filtering and DMZ hosting  Downloa dable flash sof tware upg rades  Suppor t fo r up to eight P er manent Vir tual Circuits (PVCs)  Suppor t f or up to eight PPP oE sessions System Requir ements In order to us ...

  • Paradyne 6218 - page 15

    1. Introduction 6218-A2-GB20-00 February 2005 1-3 connection is estab lished. Flic kering: a PPP con nection is estab lished and there is acti vity on the link.  LAN 1–4 LED: Each LAN LED serves tw o purposes. If the LED is co ntinuously lit, the Ether net inter f ace is succe ssfully connecte d to a device through the LAN por t. If the LED is ...

  • Paradyne 6218 - page 16

    1. Introduction 1-4 February 2005 6218-A2-GB20-00 ...

  • Paradyne 6218 - page 17

    6218-A2-GB20-00 February 2005 2-1 2 Hard war e Installation and PC Setup Overview This chapter provides basic instructions for connecting the rout er to a computer or a LAN and to the Inte r net using DSL. The first part provides instructions to set up the hardw are, an d the second par t describes how to pre pare yo ur PC f or use with the router ...

  • Paradyne 6218 - page 18

    2. Hardware Installation and PC Setup 2-2 February 2005 6218-A2-GB20-00 — If y ou hav e a table-t op adapter , use the A C power cord t o connect the adapter to a w all outlet or po wer strip . The supplied power adapter ma y look di ff erent than the one illustrated here. Figure 2-1. Hardwar e Installation 5. Configure y our router and y our wir ...

  • Paradyne 6218 - page 19

    2. Hardware Installation and PC Setup 6218-A2-GB20-00 February 2005 2-3 Conf iguring Y our PC’ s IP Address Bef ore you star t to access the router using t he Ether net connection, y ou must configure y our PC to use DHCP , or change y our PC's TCP/IP address to b e 192.168.1.x, wher e x is any number bet ween 2 and 254, with a subnet mask o ...

  • Paradyne 6218 - page 20

    2. Hardware Installation and PC Setup 2-4 February 2005 6218-A2-GB20-00 4. Ensure that the chec k box to the lef t of the item labeled Internet Protocol (TCP/IP) is chec ked, and clic k on Proper ties. Figure 2-2. Network Connections i n Windo ws XP Figure 2-3. Local Ar ea Connect ion Properties in Wind ows XP ...

  • Paradyne 6218 - page 21

    2. Hardware Installation and PC Setup 6218-A2-GB20-00 February 2005 2-5 5. In the Internet Protocol (TCP/IP) Prop er ties dialog bo x, click in t he radio b utton labeled “Use the f ollowing IP address” and type 192. 168.1.x (where x is any number bet ween 2 and 254) in the IP Add ress field. T ype 255.255.255.0 in the Subnet Mas k field. Figur ...

  • Paradyne 6218 - page 22

    2. Hardware Installation and PC Setup 2-6 February 2005 6218-A2-GB20-00 4. If Internet Protocol (TCP/ IP) does not appear as a n installed component, click on I nstall. 5. In the Select Netw ork Component T ype dialog bo x, select Protocol, and then click on A dd. 6. Select Inte r net Protoco l (TCP/IP) in the Networ k Protocols lis t, and then cli ...

  • Paradyne 6218 - page 23

    2. Hardware Installation and PC Setup 6218-A2-GB20-00 February 2005 2-7 Y ou may be prompted to install f iles from your Windo ws ME installation CD or other media. F ollow the instru ctions to install the files. 8. If prompted, clic k on OK to restar t your computer with t he new settings . 9. After restarting your PC , double-clic k on the Netwo ...

  • Paradyne 6218 - page 24

    2. Hardware Installation and PC Setup 2-8 February 2005 6218-A2-GB20-00 10. In the TCP/IP Properties dialog bo x, click on th e IP Address tab . 11. Click in the radio button labeled “U se the f ollowing IP address” and type 192.168.1.x (w here x is any number be tween 2 and 254) in the I P Address field. T ype 255.255.25 5.0 in the Subnet Mask ...

  • Paradyne 6218 - page 25

    6218-A2-GB20-00 February 2005 3-1 3 Using the W eb Interface Logging Into Y our Router T o configure y our router , open y our web brow ser . Ignore any err or about lac king a connection. T ype the def ault IP a ddress (192.168.1.1) in to the Location field of yo ur browser and pr ess the Enter ke y . The follo wing screen appears . Figure 3-1. Lo ...

  • Paradyne 6218 - page 26

    3. Using the Web Interface 3-2 February 2005 6218-A2-GB20-00 Home Page The first screen ( Figure 3-2 ) that appears after the lo g in screen is the Home page. F rom this screen you can configure the LAN and W AN connection s, configure th e router's security , routing, and filtering, access debugging tools, obtain the status of the router , an ...

  • Paradyne 6218 - page 27

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-3 Figure 3-3. Setup Options Wide Ar ea Network Connection The DSL (L INE) connect ion is the Wide Area Networ k (WAN) connection. It is also ref erred to as a broadband connection. The re quirements f or the W AN connection depend on your In ternet Ser vice P rovider (ISP). Mo st of the con ...

  • Paradyne 6218 - page 28

    3. Using the Web Interface 3-4 February 2005 6218-A2-GB20-00 Conf iguring the W AN Bef ore the router will pass any data between the LAN interf ace and the W AN interf ace, the W AN side of the router m ust be configured. Depe nding upon yo ur ISP , you will need some or all of the information listed below bef ore yo u can properly configure the W ...

  • Paradyne 6218 - page 29

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-5 New Connection A new conne ction is basically a vir tual connection. Y our router can supp or t up to 8 diff erent vir tual connections. If y ou hav e multiple diff erent vir tual connections, you ma y need to utilize the static and dynamic routing capabilities of the router to pass data ...

  • Paradyne 6218 - page 30

    3. Using the Web Interface 3-6 February 2005 6218-A2-GB20-00  Idle Timeout - Specifies that PPP oE connection sh ould disconn ect if the link has no activity dete cted f or the specified n umber of seconds . This field is used in conjunction with the On Demand f eature. T o disable the tim eout f eature, enter a zero in this field.  A uthenti ...

  • Paradyne 6218 - page 31

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-7 T ools (at the top of the page) and select System Commands . At the System Commands page, click on Sa ve All. PPPoA Connection Setup PPP oA is defined in the Internet standard RFC 2364. It is a method of encapsulating PPP pack ets ov er A TM cells w hich are carried over the DSL line . PP ...

  • Paradyne 6218 - page 32

    3. Using the Web Interface 3-8 February 2005 6218-A2-GB20-00  P asswor d – The pass word f o r the PPP oA access . This is provided b y you r DSL ser vice provider or y our ISP .  Idle Timeout – Specifies that PPP oA connection should disconnect if the link has no activity dete cted f or the specified n umber of seconds . This field is us ...

  • Paradyne 6218 - page 33

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-9 T o complete the connection y ou must no w click t he Apply but ton. The Apply b utton will temporarily sav e this connection. T o make the change pe rmanent, click on T ools (at the top of the page) and select System Commands . At the System Commands page, click on Sa ve All. Static Conn ...

  • Paradyne 6218 - page 34

    3. Using the Web Interface 3-10 February 2005 6218-A2-GB20-00 Figure 3-6. Static IP Connection Setup T o complete the connection y ou must no w click t he Apply but ton. The Apply b utton will temporarily sav e this connection. T o make the change pe rmanent, click on T ools (at the top of the page) and select System Commands . At the System Comman ...

  • Paradyne 6218 - page 35

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-11 7. Select the encapsula tion type (LLC or VC). If y ou are not sure which to use , just use the def ault mode. 8. Select the quality of ser vice (QOS). Leav e the def ault v alue if your I SP did not provide t his inf or mation. Depending on the QoS y ou select, you ma y also enter: — ...

  • Paradyne 6218 - page 36

    3. Using the Web Interface 3-12 February 2005 6218-A2-GB20-00 T o configure the router as a bridge: Procedur e 1. F rom the Home page, clic k on Setup and then click on Ne w Connection. The def ault PPP oE connection setup is displa yed. 2. At the T ype field select Bridge . The Bridge connection setup pa ge is displa yed (see Figure 3-8 ). 3. Giv ...

  • Paradyne 6218 - page 37

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-13 T ools (at the top of the page) and select System Commands . At the System Commands page, click on Sa ve All. Modify an Existing Connection T o modify an ex isting connection: Procedur e 1. F rom the Home screen, click on Setup . 2. Click on the connection y ou want to modify . The conne ...

  • Paradyne 6218 - page 38

    3. Using the Web Interface 3-14 February 2005 6218-A2-GB20-00 The Apply button will tempor arily sav e these settings. T o make the change permanent, click on T ools (at the top of th e page) and select System Commands . At the System Commands page , click on Sa ve All. Conf iguring the LAN T o configure LAN paramete rs, clic k on Setup on the Home ...

  • Paradyne 6218 - page 39

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-15 3. The DHCP server is enab led when “Ena ble DHCP Ser v er” is selected. If you enab le it: — Specify a Start IP address. The Start IP Address is where the DHCP ser ver star ts iss uing IP addr esses. This value must be greater than t he router's IP address v alue. F or exampl ...

  • Paradyne 6218 - page 40

    3. Using the Web Interface 3-16 February 2005 6218-A2-GB20-00 T o change the router's IP addre ss: Procedur e 1. F rom the Home screen, click on Setup . 2. Under LAN Setup , select LAN Configuration. The L AN Group 1 Configuration screen appears , as shown in Figure 3-10, LAN Group 1 Co nfiguration . 3. Click on “Use the f ollowing Static IP ...

  • Paradyne 6218 - page 41

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-17 Fir ewall/NA T Services T o enable or disable Firewall and NA T: Procedur e 1. F rom the Home screen, click Setup . 2. Under LAN Setup, select Fire wall/NA T Serv ices. By unselecting the Enab le Firew all and NA T Ser vices button the firew all and NA T ser vices is disabled f or all W ...

  • Paradyne 6218 - page 42

    3. Using the Web Interface 3-18 February 2005 6218-A2-GB20-00 Advanced The CPE suppor ts a host of adv anced f eatures. F or basic router functionality , you do not need to utilize these adv anced feat ures . The fe atures help with routing, security , por t configuration, and plug and play capability . UPnP UPnP NA T and Firew all T rav ersal allo ...

  • Paradyne 6218 - page 43

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-19 SNTP The SNTP screen lets y ou specify parameters related to SNTP (Simple Netw ork Time Protoc ol) ser vers. T o use SNTP: Procedur e 1. F rom the Home screen, clic k on Advanced and under Adv anced, select SNTP . The SNTP screen appears . 2. Enable SNTP and then specify one or more SNTP ...

  • Paradyne 6218 - page 44

    3. Using the Web Interface 3-20 February 2005 6218-A2-GB20-00 T o configure a ser vice, game , or other application: Procedur e 1. F rom the Home screen, click on Advanced. 2. Under Adv anced, select P or t Forw arding. 3. Select the computer hosting the ser vice and add the corre sponding fire wall rul e. 4. If yo u want to add a custo m applicati ...

  • Paradyne 6218 - page 45

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-21 IP Filters Use the IP Filters screen to b lock all or sele cted traffic. T o set up IP Filters: Procedur e 1. F rom the Home screen, click on Advanced and under Advan ced, select IP Filters. The IP Filters screen appears . 2. Select the LAN Group from the drop-down list that these change ...

  • Paradyne 6218 - page 46

    3. Using the Web Interface 3-22 February 2005 6218-A2-GB20-00 LAN Clients T o ad d a LAN clie nt, or rese r ve an IP address for a DHCP client: Procedur e 1. F rom the Home screen, click on Advanced. 2. Under Advanced, select LAN Clients . If DHCP is used, all DHCP clients are automatically assigned. If a fixed IP address server is on the LAN and y ...

  • Paradyne 6218 - page 47

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-23 The Apply button will tempor arily sav e these settings. T o make the change per manent, click on T ools and select System Commands. On the System Commands page, click on Sa ve All. Figure 3-18. VLAN Bridge Filters The bridge filtering mechanism provides a wa y for the users to define ru ...

  • Paradyne 6218 - page 48

    3. Using the Web Interface 3-24 February 2005 6218-A2-GB20-00 be used to delete the en tire filter rule. It pro vides a quick met hod of selecting all filter rules for deletion. The Enab le Bridge Filters button allows y ou to enable or disab le br idge filtering. It can be set or unse t during any add, edit, or delete operatio n. It can also be se ...

  • Paradyne 6218 - page 49

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-25 W eb Filters This option enab les the IGMP prox y , which allows NA T clients to par ticipate in IGMP multicast gr oups. It should only be enabled if NA T is also enabled . T o enable Multicas ting: Procedur e 1. F rom the Home screen, click on Advanced. 2. Under Adv anced, select W eb F ...

  • Paradyne 6218 - page 50

    3. Using the Web Interface 3-26 February 2005 6218-A2-GB20-00 Multicast This option enab les the IGMP prox y , which allows NA T clients to par ticipate in IGMP multicast gr oups. It should only be enabled if NA T is also enabled . T o enable Multicas ting: Procedur e 1. F rom the Home screen, click on Advanced. 2. Under Advanced, select Muliticast ...

  • Paradyne 6218 - page 51

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-27 IGMP Snooping Use the IGMP Snooping screen to specify whether IGMP Snooping is enab led. When IGMP Snooping is en abled, the r outer analyzes In ter net Group Management Proto col (IGMP) pac kets to learn multicast group address and port associations. T o enable IGM P Snooping: 1. F rom ...

  • Paradyne 6218 - page 52

    3. Using the Web Interface 3-28 February 2005 6218-A2-GB20-00 3. Specify the New Destination IP . This is the address of the remot e LAN network or host to which y ou want to assign a static r oute. Enter t he IP address of the host f or which yo u wish to create a static route here . F or a standard Class C IP domain, the netw ork address is the f ...

  • Paradyne 6218 - page 53

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-29 3. Specify th e Protocol. The protoco l is dependent upon the e ntire networ k. Most networks suppor t RIP v1. If RIP v1 is se lected, routing data will be sent in RIP v1 f or mat. If RIP v2 is selec ted, rout ing data will be sent in RIP v2 format using subnet broadcas ting. If Rip v1 C ...

  • Paradyne 6218 - page 54

    3. Using the Web Interface 3-30 February 2005 6218-A2-GB20-00 Access Control Access contro l allows cer tain PC s to access th e router after the firewall is enabled. Access control is enab led on a W AN conn ection only if the firewall is enab led globally (see Firewa ll/NA T Ser vices on page 3-17) and ena bled on tha t W AN connection. T o enabl ...

  • Paradyne 6218 - page 55

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-31 Wi re l e s s The Wireless tab pro vides access to screens that let y ou configure paramet ers related to t he router’ s wireless LAN conn ection. Setup The Wireless Setup screen contains th e wireless LAN user settings . T o ch ange the Wirele ss Setup: Procedur e 1. F rom the Home sc ...

  • Paradyne 6218 - page 56

    3. Using the Web Interface 3-32 February 2005 6218-A2-GB20-00 The Apply button will tempor arily sav e these settings. T o make the change permanent, click on T ools (at the top of th e page) and select System Commands . At the System Commands pa ge, clic k on Sav e All. Then turn off and turn on the router to put the settings into eff ect. Channel ...

  • Paradyne 6218 - page 57

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-33 Conf iguration The Wireless Configur ation screen contains th e wireless LAN opera tional settings . Do not change an ything on the Wireless Configu ration screen unless y ou are so directed b y your ISP . T o view the Wireless Configur ation setting s: Procedur e 1. F rom the Home scree ...

  • Paradyne 6218 - page 58

    3. Using the Web Interface 3-34 February 2005 6218-A2-GB20-00 Figure 3-28. W ireless Security Scr een 3. Select a security type: — None. An yone can connect to the wire less LAN. — WEP (Wired Equiv alent Privac y). Users of the wireless LAN m ust supply an encryption ke y , as defined on this screen. If an Auth entication T ype of Shared is se ...

  • Paradyne 6218 - page 59

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-35 the address of the RADIUS server , the P or t, the shared Secret , and the Interval in seconds at which auth entication must be repeated. Figure 3-30. Wir eless Security 802.11x Screen — WP A (Wi-Fi Protected Access). For WP A you can specify a RADIUS ser ver (as with 802.1x, abov e) o ...

  • Paradyne 6218 - page 60

    3. Using the Web Interface 3-36 February 2005 6218-A2-GB20-00 Management The Wireless Management screen allows y o u to control access, displa y clients, and establish m ultiple SSIDs. T o use Wire less Mana gement: Procedur e 1. F rom the Home screen, click on the Wireless tab . 2. F rom the Wireless menu, clic k on Management. The Wire less Manag ...

  • Paradyne 6218 - page 61

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-37 — Associated Stations – T o display wire less clients curren tly connected to the router. Figure 3-33. Wir eless Management Associated Stations Screen — Multiple SSIDs – T o cause the router to adv er tise the wireless LAN using more than one Service Set IDentifier (SSID). Figure ...

  • Paradyne 6218 - page 62

    3. Using the Web Interface 3-38 February 2005 6218-A2-GB20-00 To o l s The T ools tab provides access to system com mands and functions. Figure 3-35. T ools Screen System Commands T o make changes p er manent, clic k on T ools (at the top of the page) and sele ct System Commands . The f ollowing co mmands are used to configure th e router:  Sav ...

  • Paradyne 6218 - page 63

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-39 Figure 3-36. System Commands Remote Log The remote log f eature fo rwards all logged inf or mation to a remote PC . The type of inf ormation forw arded to the remote PC depends upon the log le vel. Each log message is assigned a se verity le v el, which indicates ho w seriously the trigg ...

  • Paradyne 6218 - page 64

    3. Using the Web Interface 3-40 February 2005 6218-A2-GB20-00 T o forward logging information: Procedur e 1. Click on T ools and select Remote Log. 2. Select a Log Le vel from the d rop-down list. 3. T ype the IP address of the remot e logging destination an d click on Add. 4. Click on Apply . T o make the change per manent, click on T ools (at the ...

  • Paradyne 6218 - page 65

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-41 If you f orget your password, you can press a nd hold the reset to factory defaults button f or 10 s econds. The r outer will be reset to its f a ctor y default configur ation and all custom configurations will be lost. Figure 3-38. User Management Update Gateway Y ou can remotely upgr a ...

  • Paradyne 6218 - page 66

    3. Using the Web Interface 3-42 February 2005 6218-A2-GB20-00 Figure 3-39. Update Gateway Ping T est Once y ou hav e your rou ter configured, it is a good idea to mak e sure you can ping the network. If you ha ve y our PC connected to the router via the def ault DHCP configuratio n, you should be able to ping the network address 192. 168.1.2. If y ...

  • Paradyne 6218 - page 67

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-43 Figure 3-40. Ping T est Modem T est The Modem T est is used to ch eck whether your router is proper ly connec ted to the W AN Network by running O AM F4 and F5 end-to-e nd and segment test s. The te st ma y take a f ew seconds to complete. T o perform th e test, select your connection fr ...

  • Paradyne 6218 - page 68

    3. Using the Web Interface 3-44 February 2005 6218-A2-GB20-00 Status The Statu s section allo ws you to view th e Status/Statistics of diff erent connections and interf aces:  Network Statistics – Select to vie w the Statistics of the Ethernet and DSL interf aces, as shown in F igure 3-42 . Figure 3-42. Network Statistics  Connection Status ...

  • Paradyne 6218 - page 69

    3. Using the Web Interface 6218-A2-GB20-00 February 2005 3-45  Product Inf or mation – Select to vie w the router's drive r and run-time inf or mation, as shown in Figure 3-44 . Figure 3-44. Product Inf ormation  System Log – Select to vie w all logged inf or mation. Depending upon the se verity le vel, this logged inf or mation w il ...

  • Paradyne 6218 - page 70

    3. Using the Web Interface 3-46 February 2005 6218-A2-GB20-00 ...

  • Paradyne 6218 - page 71

    6218-A2-GB20-00 February 2005 4-1 4 T r oubleshooting The Router Is Not Functional 1. Chec k to see that the po wer LED is green and th an the network cabl es are installed correctly . Refer to Co nnecting the Hardw are in Chapter 2, Hardware Installation and PC Setup for more details. 2. Chec k to see that the LAN and ST A TUS LEDs are green. 3. C ...

  • Paradyne 6218 - page 72

    4. Troubleshooting 4-2 February 2005 6218-A2-GB20-00 PC , type ipconfig /all (or winipcfg /a ll on Windows 95, 98, or ME) at a command prompt to determine the IP address of y our network adapter . Mak e sure that it is within the sa me 192.168.1.x subnet. Y our PC's subnet mask must match th e router's subnet mask. The route r has a def a ...

  • Paradyne 6218 - page 73

    6218-A2-GB20-00 February 2005 A-1 A T erminology What is a Fir ewall? A fire wall is protection betw een the Internet and your local netw ork. It acts as the fire wall in y our car does , protecting the int erior of the car from the engine . Y our car's firew all has very small opening that allow desired connections f rom the engine into the c ...

  • Paradyne 6218 - page 74

    A. Terminology A-2 February 2005 6218-A2-GB20-00 Y our machine isn't really directly connected to the Int er net, and it really has an internal local network address . When you pro vide the server 's network address to others , you actu ally provide the add ress of the router . The rout er fa kes the connection to your machine. Y ou shoul ...

  • Paradyne 6218 - page 75

    6218-A2-GB20-00 February 2005 IN-1 Index A About This Guide, v Access Control, 3-30 ADSL, 1-1 ADSL2+, 1-1 Advanced, 3-18 Advanced F eatures, 3 -18 Assigning IP Address using DHCP, 2-3 B Back Panel, 1-2 Bridge, 1-1 Connection, 3-11 Filters, 3-23 Bridge Filters, 3-23 Bridged Connection, 3-11 C Cables Installing, 2-1 CE Marking, B Changing IP address, ...

  • Paradyne 6218 - page 76

    Index IN-2 February 2005 6218-A2-GB20-00 L LAN Clients, 3-22 Configuring, 3-14 Connection, 3-3 LED, 1-3 ports, connecting, 2-1 LED Blinking in a Sequential Pattern, 4-2 Description, 1-2 Link, 1-2 Status L ED continues to blink, 4-2 Link LED, 1 -2 Local Area Network Connecti on, 3-3 Logging In, 3 -1 Logging Out, 3-30 M Modem Setup, 3-13 Test, 3-43 M ...

  • Paradyne 6218 - page 77

    Index 6218-A2-GB20-00 February 2005 IN-3 User Management, 3-40 Username, 3-1 V VLAN, 3-22 W WAN Configuring, 3-4 Connection, 3-3 Warranty, Sales, Service, and Training Information , A Web filters, 3-25 Web Interface, using, 3 -1 Wide Area Network Connection, 3-3 Windows 2000, 2-5 95, 98, 2-7 ME, 2 -6 NT 4.0, 2-8 XP, 2-3 ...

  • Paradyne 6218 - page 78

    Index IN-4 February 2005 6218-A2-GB20-00 ...

Manufacturer Paradyne Category Network Router

Documents that we receive from a manufacturer of a Paradyne 6218 can be divided into several groups. They are, among others:
- Paradyne technical drawings
- 6218 manuals
- Paradyne product data sheets
- information booklets
- or energy labels Paradyne 6218
All of them are important, but the most important information from the point of view of use of the device are in the user manual Paradyne 6218.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Paradyne 6218, service manual, brief instructions and user manuals Paradyne 6218. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Paradyne 6218.

Similar manuals

A complete manual for the device Paradyne 6218, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Paradyne 6218 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Paradyne 6218.

A complete Paradyne manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Paradyne 6218 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Paradyne 6218, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Paradyne 6218, that we can find in the current document
3. Tips how to use the basic functions of the device Paradyne 6218 - which should help us in our first steps of using Paradyne 6218
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Paradyne 6218
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Paradyne 6218 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Paradyne 6218?

Use the form below

If you did not solve your problem by using a manual Paradyne 6218, ask a question using the form below. If a user had a similar problem with Paradyne 6218 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)