-
Canon 9518B002 - page 1
EF16-35mm f/4L IS USM Instructions ENG C OP Y ...
-
Canon 9518B002 - page 2
ENG-1 Thank you for purchasing a Canon product. Canon’s EF16-35mm f/4L IS USM is a high- performance ultra-wide angle zoom lens, for use with EOS cameras. The lens is installed with an Image Stabilizer. “IS” stands for Image Stabilizer. “USM” stands for Ultrasonic Motor. Features 1. Equipped with an Image Stabilizer that provides ...
-
Canon 9518B002 - page 3
ENG-2 Safety Precautions Safety Precautions Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. ...
-
Canon 9518B002 - page 4
ENG-3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modications to the equipment unless ot ...
-
Canon 9518B002 - page 5
ENG-4 Nomenclature For de tailed info rmati on, refe rence pag e number s are provi ded in pare nthes es ( → **). Focus mode switch ( → 6) Distance scale ( → 7) Zoom ring ( → 6) Rubber ring ( → 5) Hood mount ( → 10) Filter Mounting Thread ( → 11) Focusing ring ( → 6) Image stabilizer switch ( → 8) Lens mount index ( → 5) Con ...
-
Canon 9518B002 - page 6
ENG-5 1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. The lens mount has a rubber ring for enhanced dust- and water-resistance. The rubber ring may cause slight abrasions around the camera’s lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is ...
-
Canon 9518B002 - page 7
ENG-6 2. Setting the Focus Mode 3. Zooming After autofocusing in ONE SHOT AF mode, focus manually by pressing the shutter button halfway and turning the focusing ring. (Full-time manual focus) T o shoot in autofocus (AF) mode, set the focus mode switch to AF . T o shoot in manual focus (MF) mode, set the focus mode switch to MF , and focus by turni ...
-
Canon 9518B002 - page 8
ENG-7 4. Innity Compensation Mark For accurate manual focusing of subjects at innity , look through the viewnder or look at the magnied image* on the LCD screen while rotating the focusing ring. T o compensate for shifting of the innity focus point that results from changes in temperature. The innity position at normal temperature ...
-
Canon 9518B002 - page 9
ENG-8 6. Image Stabilizer Y ou can use the image stabilizer in AF or MF mode. This function provides optimal image stabilization depending on shooting conditions (such as shooting still subjects and following shots). OFF ON The image stabilizer in this lens is effective for hand-held shots under the following conditions. In semi-darkened areas ...
-
Canon 9518B002 - page 10
ENG-9 When shooting a still subject, it compensates for camera shake in all directions. It compensates for vertical camera shake during following shots in a horizontal direction, and compensates for horizontal camera shake during following shots in a vertical direction. When you use a tripod, the Image Stabilizer should be turned off to ...
-
Canon 9518B002 - page 11
ENG-10 7. Hood ●Attaching T o attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arrow until the lens’ red dot is aligned with the hood’s stop position mark. ●Removing T o remove the hood, hold down the button on the side and turn the hood in the directi ...
-
Canon 9518B002 - page 12
ENG-1 1 10. Extension T ubes (Sold separately) 8. Filters (Sold separately) Y ou can attach extension tube EF12 II or EF25 II for magnied shots. The shooting distance and magnication are shown below . MF mode is recommended for accurate focusing. Focusing Distance Range (mm) Magnication (×) Close distance Long distance Close distance Long ...
-
Canon 9518B002 - page 13
ENG-12 Specications The lens leng th is measu red from the mou nt surfa ce to the fron t end of the lens . Add 24.2 mm when inc luding the len s cap and dus t cap. The size and wei ght list ed are for the lens only , exce pt as indic ated. Exten ders cann ot be used wi th this len s. Apert ure setti ngs are spe cied on the ca ...
-
Canon 9518B002 - page 14
CT1-8597-000 0414Ni © CANON INC. 2014 C OP Y ...
Canon 9518B002についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもCanon 9518B002の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCanon 9518B002で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。