Invacare OCMK78の取扱説明書

16ページ 0.54 mb
ダウンロード

ページに移動 of 16

Summary
  • Invacare OCMK78 - page 1

    On Chair Mounting Kit Assembly , Installation and Operating Instructions Model Nos. OCMK01 and OCMK78 SA VE THESE INSTRUCTIONS NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instruction. SAFETY SUMMARY To ensure the safe installation of the On Chair Mounting Kit for the ContourU seatin ...

  • Invacare OCMK78 - page 2

    2 INSTALLATION OF THE ON CHAIR MOUNTING KIT BACK MOUNTING HARDWARE (FIGURE 1) NOTE: Refer to GENERAL and INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet. NOTE: The wheelchair hardware consists of two (2) fixed release clamps and two (2 twist release clamps. The wheelchair hardware must be mounted facing forward (in front of th ...

  • Invacare OCMK78 - page 3

    3 Twist Release Clamps. DETAIL "B" Mark FRONT OF WHEELCHAIR Fixed Release Clamp Internal Threaded Mounting Screw Washer Mounting Screw DETAIL "A" Upper J Brackets (Top Edge) Lower J Brackets (Bottom Edge) L Brackets Back Canes ContourU Back Mark Mark Mark Internal Threaded Mounting Screw Mounting Screw Washer Back Ccane Lock Was ...

  • Invacare OCMK78 - page 4

    4 INSTALLING THE BACK L BRACKETS (FIGURE 2) NOTE: When mounting the L brackets to the wood backed ContourU cushion the L brackets may be reversed to allow for greater seat depth adjustments as shown in DETAIL A of FIGURE 2. 1. Position the ContourU Back between the back canes and determine the mounting posi- tions for the four (4) L brackets ...

  • Invacare OCMK78 - page 5

    5 INSTALLING THE BACK J BRACKETS (FIGURE 3) 1. Position the ContourU back between the back canes to determine the approximate mounting position of the J brackets to obtain the desired depth. 2. Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting holes on the L bracket as shown in FIGURE 3. 3. Using two (2) mo ...

  • Invacare OCMK78 - page 6

    6 INSTALLING/REMOVING THE CONTOUR U SEATING SYSTEM BACK (FIGURE 4) Installing 1. Ensure that the twist release clamps are in the OPEN position as shown in DETAIL A of FIGURE 4. 2. Position the two (2) lower J brackets securely into the two (2) fixed release clamps as shown in FIGURE 4. 3. Position the upper two (2) J brackets against the back ...

  • Invacare OCMK78 - page 7

    7 ADJUSTING THE CONTOUR U BACK DEPTH (FIGURE 5) NOTE: There are six (6) depth adjustments avail- able on the ContourU with a pan back. NOTE: There are twelve (12) depth adjustments available on the ContourU with a wood back. Six (6) mounting positions with the L brackets facing the front of the wheel chair and six (6) mounting positions with the L ...

  • Invacare OCMK78 - page 8

    8 ADJUSTING THE CONTOUR U SEATING SYSTEM BACK ANGLE (FIGURE 6) NOTE: Before performing this procedure all four (4) J brackets must be adjusted to the same depth. Refer to ADJUSTING THE CONT OUR U SEA TING SYSTEM BACK DEPTH in this instruction sheet. NOTE: The back to seat angle is adjusted by repositioning the top and/or the bottom J brackets. NOTE ...

  • Invacare OCMK78 - page 9

    9 INSTALLATION OF ON CHAIR MOUNTING KIT SEAT MOUNTING HARDWARE (FIGURE 7) NOTE: Refer to GENERAL and INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet. NOTE: The wheelchair hardware consists of two (2) fixed release clamps and two (2) twist release clamps. The wheelchair hardware must be mounted facing up (on top of the seat rai ...

  • Invacare OCMK78 - page 10

    10 Twist Release Clamps. DETAIL "B" Mark Fixed Release Clamp Internal Threaded Mounting Screw Washer Mounting Screw DETAIL "A" Front J Brackets (Front Edge) Rear J Brackets (Rear Edge) L Brackets Seat Rail ContourU Back Mark Mark Mark Internal Threaded Mounting Screw Mounting Screw Washer Seat Rail (Top) Lock Washer Lock Washer ...

  • Invacare OCMK78 - page 11

    11 INSTALLING THE SEAT L BRACKETS (FIGURE 8) NOTE: When mounting the L brackets to the wood backed ContourU seat the L brackets may be reversed to allow for a wider range of seat height adjustments and shown in DETAIL A of FIGURE 8. 1. Position the ContourU seat between the seat rails and determine the mounting positions for the four (4) L br ...

  • Invacare OCMK78 - page 12

    12 INSTALLING THE SEAT J BRACKETS (FIGURE 9) 1. Position the ContourU seat between the seat rails to determine the approximate mounting position of the J brackets to ensure the appropriate height setting. 2. Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting holes on the L bracket as shown in FIGURE 9. 3. Us ...

  • Invacare OCMK78 - page 13

    13 INSTALLING/REMOVING THE CONTOUR U SEATING SYSTEM SEAT (FIGURE 10) Installing 1. Ensure that the twist release clamps are in the OPEN position as shown in DETAIL A of FIGURE 10. 2. Position the rear J brackets securely into the fixed release clamps as shown in FIGURE 10. 3. Position the front J brackets onto the seat rail just below the twi ...

  • Invacare OCMK78 - page 14

    14 ADJUSTING THE CONTOUR U SEAT HEIGHT (FIGURE 11) NOTE: There are six (6) height adjustments avail- able on the ContourU seat with a seat pan. NOTE: There are twelve (12) height adjustments available on the ContourU seat with a wood back. Six (6) mounting positions with the L brackets fac- ing the front of the wheelchair and six (6) mounting posit ...

  • Invacare OCMK78 - page 15

    15 ADJUSTING THE CONTOUR U SEATING SYSTEM SEAT ANGLE (FIGURE 12) NOTE: Before performing this procedure all four (4) J brackets must be adjusted to the same height. Refer to ADJUSTING THE CONTOUR U SEAT HEIGHT in this instruction sheet. NOTE: The seat angle is adjusted by repositioning the front and/or the rear J brackets. NOTE: Adjustments made to ...

  • Invacare OCMK78 - page 16

    Invacare Corporation www.invacare.com USA Canada One Invacare Way 570 Matheson Blvd E Unit 8 Invacare is a registered trademark of Elyria, Ohio USA Mississauga Ontario Invacare Corporation. 44036-2125 L4Z4G4 Canada Yes, you can. is a trademark of Invacare 800-333-6900 800-668-5324 Corporation. © 2002 Invacare Corporation Part No. 1106654 Rev A (1) ...

メーカー Invacare カテゴリー Mobility Aid

Invacare OCMK78のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- OCMK78の取扱説明書
- Invacareの製品カード
- パンフレット
- またはInvacare OCMK78の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Invacare OCMK78の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Invacare OCMK78の取り付け説明書、サービスマニュアル、簡易説明書、またはInvacare OCMK78のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Invacare OCMK78の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Invacare OCMK78デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがInvacare OCMK78を使用するのを助ける技術的文書のことです。説明書は通常、全てのInvacare OCMK78ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Invacareの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Invacare OCMK78の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははInvacare OCMK78の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Invacare OCMK78に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Invacare OCMK78デバイスの基本機能を使うにあたってのヒント。 Invacare OCMK78のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Invacare OCMK78に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるInvacare OCMK78のメーカー/サービスへの連絡先に関する情報。

Invacare OCMK78についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもInvacare OCMK78の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがInvacare OCMK78で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)