English dropdown-ico

Manual Invacare OCMK78

16 pages 0.54 mb
Download

Go to site of 16

Summary
  • Invacare OCMK78 - page 1

    On Chair Mounting Kit Assembly , Installation and Operating Instructions Model Nos. OCMK01 and OCMK78 SA VE THESE INSTRUCTIONS NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instruction. SAFETY SUMMARY To ensure the safe installation of the On Chair Mounting Kit for the ContourU seatin ...

  • Invacare OCMK78 - page 2

    2 INSTALLATION OF THE ON CHAIR MOUNTING KIT BACK MOUNTING HARDWARE (FIGURE 1) NOTE: Refer to GENERAL and INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet. NOTE: The wheelchair hardware consists of two (2) fixed release clamps and two (2 twist release clamps. The wheelchair hardware must be mounted facing forward (in front of th ...

  • Invacare OCMK78 - page 3

    3 Twist Release Clamps. DETAIL "B" Mark FRONT OF WHEELCHAIR Fixed Release Clamp Internal Threaded Mounting Screw Washer Mounting Screw DETAIL "A" Upper J Brackets (Top Edge) Lower J Brackets (Bottom Edge) L Brackets Back Canes ContourU Back Mark Mark Mark Internal Threaded Mounting Screw Mounting Screw Washer Back Ccane Lock Was ...

  • Invacare OCMK78 - page 4

    4 INSTALLING THE BACK L BRACKETS (FIGURE 2) NOTE: When mounting the L brackets to the wood backed ContourU cushion the L brackets may be reversed to allow for greater seat depth adjustments as shown in DETAIL A of FIGURE 2. 1. Position the ContourU Back between the back canes and determine the mounting posi- tions for the four (4) L brackets ...

  • Invacare OCMK78 - page 5

    5 INSTALLING THE BACK J BRACKETS (FIGURE 3) 1. Position the ContourU back between the back canes to determine the approximate mounting position of the J brackets to obtain the desired depth. 2. Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting holes on the L bracket as shown in FIGURE 3. 3. Using two (2) mo ...

  • Invacare OCMK78 - page 6

    6 INSTALLING/REMOVING THE CONTOUR U SEATING SYSTEM BACK (FIGURE 4) Installing 1. Ensure that the twist release clamps are in the OPEN position as shown in DETAIL A of FIGURE 4. 2. Position the two (2) lower J brackets securely into the two (2) fixed release clamps as shown in FIGURE 4. 3. Position the upper two (2) J brackets against the back ...

  • Invacare OCMK78 - page 7

    7 ADJUSTING THE CONTOUR U BACK DEPTH (FIGURE 5) NOTE: There are six (6) depth adjustments avail- able on the ContourU with a pan back. NOTE: There are twelve (12) depth adjustments available on the ContourU with a wood back. Six (6) mounting positions with the L brackets facing the front of the wheel chair and six (6) mounting positions with the L ...

  • Invacare OCMK78 - page 8

    8 ADJUSTING THE CONTOUR U SEATING SYSTEM BACK ANGLE (FIGURE 6) NOTE: Before performing this procedure all four (4) J brackets must be adjusted to the same depth. Refer to ADJUSTING THE CONT OUR U SEA TING SYSTEM BACK DEPTH in this instruction sheet. NOTE: The back to seat angle is adjusted by repositioning the top and/or the bottom J brackets. NOTE ...

  • Invacare OCMK78 - page 9

    9 INSTALLATION OF ON CHAIR MOUNTING KIT SEAT MOUNTING HARDWARE (FIGURE 7) NOTE: Refer to GENERAL and INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet. NOTE: The wheelchair hardware consists of two (2) fixed release clamps and two (2) twist release clamps. The wheelchair hardware must be mounted facing up (on top of the seat rai ...

  • Invacare OCMK78 - page 10

    10 Twist Release Clamps. DETAIL "B" Mark Fixed Release Clamp Internal Threaded Mounting Screw Washer Mounting Screw DETAIL "A" Front J Brackets (Front Edge) Rear J Brackets (Rear Edge) L Brackets Seat Rail ContourU Back Mark Mark Mark Internal Threaded Mounting Screw Mounting Screw Washer Seat Rail (Top) Lock Washer Lock Washer ...

  • Invacare OCMK78 - page 11

    11 INSTALLING THE SEAT L BRACKETS (FIGURE 8) NOTE: When mounting the L brackets to the wood backed ContourU seat the L brackets may be reversed to allow for a wider range of seat height adjustments and shown in DETAIL A of FIGURE 8. 1. Position the ContourU seat between the seat rails and determine the mounting positions for the four (4) L br ...

  • Invacare OCMK78 - page 12

    12 INSTALLING THE SEAT J BRACKETS (FIGURE 9) 1. Position the ContourU seat between the seat rails to determine the approximate mounting position of the J brackets to ensure the appropriate height setting. 2. Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting holes on the L bracket as shown in FIGURE 9. 3. Us ...

  • Invacare OCMK78 - page 13

    13 INSTALLING/REMOVING THE CONTOUR U SEATING SYSTEM SEAT (FIGURE 10) Installing 1. Ensure that the twist release clamps are in the OPEN position as shown in DETAIL A of FIGURE 10. 2. Position the rear J brackets securely into the fixed release clamps as shown in FIGURE 10. 3. Position the front J brackets onto the seat rail just below the twi ...

  • Invacare OCMK78 - page 14

    14 ADJUSTING THE CONTOUR U SEAT HEIGHT (FIGURE 11) NOTE: There are six (6) height adjustments avail- able on the ContourU seat with a seat pan. NOTE: There are twelve (12) height adjustments available on the ContourU seat with a wood back. Six (6) mounting positions with the L brackets fac- ing the front of the wheelchair and six (6) mounting posit ...

  • Invacare OCMK78 - page 15

    15 ADJUSTING THE CONTOUR U SEATING SYSTEM SEAT ANGLE (FIGURE 12) NOTE: Before performing this procedure all four (4) J brackets must be adjusted to the same height. Refer to ADJUSTING THE CONTOUR U SEAT HEIGHT in this instruction sheet. NOTE: The seat angle is adjusted by repositioning the front and/or the rear J brackets. NOTE: Adjustments made to ...

  • Invacare OCMK78 - page 16

    Invacare Corporation www.invacare.com USA Canada One Invacare Way 570 Matheson Blvd E Unit 8 Invacare is a registered trademark of Elyria, Ohio USA Mississauga Ontario Invacare Corporation. 44036-2125 L4Z4G4 Canada Yes, you can. is a trademark of Invacare 800-333-6900 800-668-5324 Corporation. © 2002 Invacare Corporation Part No. 1106654 Rev A (1) ...

Manufacturer Invacare Category Mobility Aid

Documents that we receive from a manufacturer of a Invacare OCMK78 can be divided into several groups. They are, among others:
- Invacare technical drawings
- OCMK78 manuals
- Invacare product data sheets
- information booklets
- or energy labels Invacare OCMK78
All of them are important, but the most important information from the point of view of use of the device are in the user manual Invacare OCMK78.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Invacare OCMK78, service manual, brief instructions and user manuals Invacare OCMK78. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Invacare OCMK78.

Similar manuals

A complete manual for the device Invacare OCMK78, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Invacare OCMK78 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Invacare OCMK78.

A complete Invacare manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Invacare OCMK78 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Invacare OCMK78, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Invacare OCMK78, that we can find in the current document
3. Tips how to use the basic functions of the device Invacare OCMK78 - which should help us in our first steps of using Invacare OCMK78
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Invacare OCMK78
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Invacare OCMK78 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Invacare OCMK78?

Use the form below

If you did not solve your problem by using a manual Invacare OCMK78, ask a question using the form below. If a user had a similar problem with Invacare OCMK78 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)