-
Auto Page RS-850lcd - page 1
JAN/07/2003 RS850 OP 1 RS - 850 lcd PROFESSIONAL REMOTE CAR STARTER WITH ALARM SYSTEM & 2 - WAY LCD COMMUNICATION OPERATION MANUAL THIS PRODUCT IS DESIGNED FOR PROFESI ONAL INSTALLATION ONLY ...
-
Auto Page RS-850lcd - page 2
JAN/07/2003 RS850 OP 2 TABLE OF CONTENTS: A. REMOTE TRANSMITTER OPERATION …………………….………. 4 B. BUTTON LOCK ……………………………………………….……...…. 5 C. LED DISPLAY .……………..……. .……………………….……………. 5 D. CHIRP INDICATOR ..………..………..………………? ...
-
Auto Page RS-850lcd - page 3
JAN/07/2003 RS850 OP 3 U. TRUNK RELEASE (CHANNEL 3) OUTPUT ………..……….………13 V. CHANNEL 4 TIMER CONTROL OUTPUT ………..…………………13 W. CHANNEL 5 TIMER CONTROL OUTPUT ………..……………….. 13 X. CHANNEL 6 TIMER CONTROL OUTPUT ………..………………... 13 Y. POWER ON MEMONRY: ………..…………...… ...
-
Auto Page RS-850lcd - page 4
JAN/07/2003 RS850 OP 4 As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing person nel that the vehicle can be started automatical ...
-
Auto Page RS-850lcd - page 5
JAN/07/2003 RS850 OP 5 LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button System Function Remark - (C) System’s Trigger Record Check Press within 3 seconds - - (C) System’s Status Check Press within 3 seconds - ( ) Button Lock Press within 3 seconds and Hold button for 2 seconds - ( ) Opti onal Driving Pager Press within 3 seconds - ( ) ...
-
Auto Page RS-850lcd - page 6
JAN/07/2003 RS850 OP 6 C. LED display: LED Function LED Function Off Disarmed Zone 1 / Warn - Away Trigger Slow Flash Armed 2 flashes... pause Zon e 2 / Trigger on Trunk/Hood Flash Passive Starter Disable 3 flashes... pause Zone 3 / Trigger on Door Switch Fast Flash Passive Arming 4 flashes... pause Zone 4 / Trigger on Shock Sensor On (Solid) Valet ...
-
Auto Page RS-850lcd - page 7
JAN/07/2003 RS850 OP 7 System Arm Door Ajar Trunk / Hood Ajar Clear The Flash Icon: Press the button 3 times within 3 seconds will clear the flash icon on the LCD screen transmitter. DEFECTIVE SENSOR R EMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (See Alarm Feature “I - 4 Programming) SILENT ARMING / ...
-
Auto Page RS-850lcd - page 8
JAN/07/2003 RS850 OP 8 I. ACTIVE DISARMING – UNLOCK & DISARM: 1. Press button on the transmitter. 2. The siren will chirp twice and parking light flash twice to indicating that the security system is now disarmed. The vehicle’s door will unlo ck and dome light turns on for 30 seconds upon disarming when interfaced with the security system. ...
-
Auto Page RS-850lcd - page 9
JAN/07/2003 RS850 OP 9 OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE: (Factory Default Setting) The Override function may be used if the remote transmitter is lost or inoperative. 1. Enter the vehicle and turn the ignition switch to 'ON’ position. 2. (Alarm will sound.) 3. Within 10 seconds push and release the valet swit ch, The alarm will ...
-
Auto Page RS-850lcd - page 10
JAN/07/2003 RS850 OP 10 system must first be disarmed either by using your remote transmitter, or by operating the Manual override sequence. Enter Valet Mode: 1. From the disarmed condition, turn the ignition to “ON” position. 2. Push and hold valet switch for 2 seconds until the LED turns on. The LED wills remain on as long as the system is in ...
-
Auto Page RS-850lcd - page 11
JAN/07/2003 RS850 OP 11 N. TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impact will trigger the warn - away signal. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cr ...
-
Auto Page RS-850lcd - page 12
JAN/07/2003 RS850 OP 12 O. ANTI CAR - JACKING Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature “OFF”. This system is default setting all car - jacking “OFF”. (See Alarm Feature I - 6 Programming.) A CTIVE ANTI CAR JACKING: 1. Press and hold the transmitter and button at the sa ...
-
Auto Page RS-850lcd - page 13
JAN/07/2003 RS850 OP 13 P. SYSTEM’S TRIGGER CHECK Press the transmitter first, within 3 seconds press (C) button. It responds with one melody sound and all trigger’s records will immediately displayed on the LCD screen. Q. SYSTEM’S STATUS CHECK When you want to check the system’s present status through the LCD scre en, Press the transmitter ...
-
Auto Page RS-850lcd - page 14
JAN/07/2003 RS850 OP 14 1. Press the transmitter button first, within 3 seconds press ( ) button to activate outdoor driver paging function , It responds with chirps of the vehicle, a melody sound and " " in dication flashes on the LCD screen to confirm the function is on. 2. When tapping the paging (knock) sensor, one chirp sound shall b ...
-
Auto Page RS-850lcd - page 15
JAN/07/2003 RS850 OP 15 Press the transmitter (4) and (4) button at the same time to active Channel 4 function. Chan nel 4 is user - programmable timer output. You may program the built - in timer to send a ground signal for any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the headlight, power w ...
-
Auto Page RS-850lcd - page 16
JAN/07/2003 RS850 OP 16 When you want to start your vehicle, 1. Pre ss button once on the transmitter. 2. The parking light will activate to indicate the remote start received the signal. 3. The engine will start approximately 5 seconds. 4. Once the engine is running, after couple seconds the pa rking light will turn on again and climate controls w ...
-
Auto Page RS-850lcd - page 17
JAN/07/2003 RS850 OP 17 1.Before turning off the engine, pre ss the button twice on the transmitter and the LED indicator will flash 3 times to confirm enter. 2.Turn the ignition key to OFF position. (The engine will stay running.) 3.The engine will run until the pre - programmed time elaps ed or shutdown input is received. D. TIMER / TEMPERATURE S ...
-
Auto Page RS-850lcd - page 18
JAN/07/2003 RS850 OP 18 parking light will flash (6) times. The siren chirps (6) times. The veh icle is now programmed to start at the real time of the next day. Your set time for the next day engine start flashes for approx. 3 seconds on the LCD screen. After 3 seconds the icon stays displayed on the LCD screen. 4. Press the brake pedal to stop th ...
-
Auto Page RS-850lcd - page 19
JAN/07/2003 RS850 OP 19 1. The hood is opened. 2. The brake pedal is pressed. 3. Engine is over - revved. {“Tachometer checking type” only} 4. The pre - programmed run ti me (5 /10 / 20 / 30 minutes) has elapsed. 5. Press button once on the remote transmitter under remote start mode . 6. Move the optional remote start enable toggle switch to OF ...
-
Auto Page RS-850lcd - page 20
JAN/07/2003 RS850 OP 20 Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such Obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low out put powered frequency. A. BATTERY REPLACEMENT: A 1.5V type AA A Alkaline battery powers the Remote Tra ...
-
Auto Page RS-850lcd - page 21
JAN/07/2003 RS850 OP 21 B. THE REMORE LCD ICONS WITH FUNCTION: Door Lock Your vehicle doors are locked Door Unlock Yo ur vehicle doors are unlocked and the system is Disarmed Armed Mode Your vehicle is in armed mode Valet Mode All the function shall be temporarily on hold. Remote Transmission You are transmitting the signal to control un it In – ...
-
Auto Page RS-850lcd - page 22
JAN/07/2003 RS850 OP 22 Vibration Mode Remote Control vibra tes when the system is triggered Button Lock Disable the transmission function temporarily Driver paging Someone is paging you in front of your vehicle Low Battery You have to replace the battery of remote control. C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER: Transmitter Button Descriptio ...
-
Auto Page RS-850lcd - page 23
JAN/07/2003 RS850 OP 23 1. Screen Lamp ON: Press and hold the button one second, with one melody sound and the LCD screen lamp will turns on for 5 seconds 2. Power Save Mode: While the power save mode, the LCD remote transmitter uses “0” current to save the battery power. Entry: 1. Press & hold the button for 5 seconds, with one melody soun ...
-
Auto Page RS-850lcd - page 24
JAN/07/2003 RS850 OP 24 It is useful when you are in a noisy place and difficult to hear b eep sound from the remote control as the remote control in this mode, vibrates itself if your security system is triggered. Press the button first, within 3 seconds press and hold the ( ) button for 2 seconds to select the mode of vibration or melody, the ico ...
-
Auto Page RS-850lcd - page 25
JAN/07/2003 RS850 OP 25 1 Press & Hold the button for 3 seconds Timer Setting (Hour) *Flash digit for adjusting for – and for + Press the button once Time setting (Minute) *Flash digit for adjusting for – and for + 2 Press the button once. Alert Alarm Time Setting (Hour) *Flash digit for adjusting for – and for + Press the button once Ale ...
-
Auto Page RS-850lcd - page 26
JAN/07/2003 RS850 OP 26 1. Press & hold the button for 3 seconds, with two - melody sound and the “Hours” digit flashes for adjusting. 2. Press the button twice, the LCD screen will shows icon a nd “Hours” digit is flashes for adjusting. 3. Press the or button to decrease or increase the “Hour” digit until PM 6:xx 4. Press the butto ...
-
Auto Page RS-850lcd - page 27
JAN/07/2003 RS850 OP 27 Press the button to stop the count down timer, and the “OFF” icon will show on the LCD screen. 8. Press the button for 2 seconds with one - melody sound to confirm exit the timer program mode. Note: Maximum is 19 hours. 4. Time Set - Up For “Daily Timer Start”: Example to AM 6:30 1. Press & hold the button for 3 ...
-
Auto Page RS-850lcd - page 28
JAN/07/2003 RS850 OP 28 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. and Continental U.S. Only) 1. AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your AutoPage equipment is guaranteed for “life” to the original purchaser/user of the equipment under the follow ing conditions: ...
-
Auto Page RS-850lcd - page 29
JAN/07/2003 RS850 OP 29 4. Any equipment or parts which are claimed to be defec tive under this WARRANTY must be sent to the AutoPage Service center with “proof of purchase” at the purchaser’s expense prior to such return, a Return Authorization Number should be obtained. AutoPage will return the equipment, charges prepaid. Warranty Service c ...
-
Auto Page RS-850lcd - page 30
JAN/07/2003 RS850 OP 30 Serial # __________ _____ CUSTOMER TO COMPLETE DEALER TO COMPLETE Mr./Mrs./Ms. ___________________________ ________________________________ Your Name (Please Print) Company Name ___________________________ ________________________________ Address Dealer’s Address ___________________________ ________________________________ ...
-
Auto Page RS-850lcd - page 31
JAN/07/2003 RS850 OP 31 1815 West 205 th Street Suite 101 Torrance, California 90501 - 1525 Main Office: 310 - 618 - 2002 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.com ...
Auto Page RS-850lcdについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAuto Page RS-850lcdの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAuto Page RS-850lcdで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。