English dropdown-ico

Manual Anaheim BLD72-1

12 pages 1.03 mb
Download

Go to site of 12

Summary
  • Anaheim BLD72-1 - page 1

    1 BLD72, BLD72-1 Bilevel Step Motor Driver User’s Guide #L010011 910 East Orangefair Lane, Anaheim, CA 92801 e-mail: info@anaheimautomation.com (714) 992-6990 fax: (714) 992-0471 website: www.anaheimautomation.com ANAHEIM AUTOMATION ...

  • Anaheim BLD72-1 - page 2

    2 General Description The BLD72 is a step motor driver that can drive motors rated from 1 to 7 amps/phase (unipolar rating). It can handle 6 lead and 8 lead motors. This driver features a unipolar bilevel (or dual voltage) drive tech- nique with short and open circuit protection (with a Fault LED). A transformer is required to power up the driver. ...

  • Anaheim BLD72-1 - page 3

    3 Clock Modes The BLD72 has two clock options: Clock and Direction, or Dual Clock operation. Jumper JP2 is used to select the clock option. Basically JP2 selects Terminal 5 as either the Direction input or the CCW input. With the Clock and Direction option (most common option), clock pulses applied to the Clock input (Ter- minal 6) cause the motor ...

  • Anaheim BLD72-1 - page 4

    4 Fault Protection There are 3 types of fault detection. When a fault is detected, the driver turns off the motor current and the red Fault LED indicates which type of fault occurred. See the Troubleshooting section for more information. If the driver goes into a fault condition, the fault may be reset by turning the power OFF for at least 15 secon ...

  • Anaheim BLD72-1 - page 5

    5 Wiring Diagram The wiring diagram in Figure 5 shows the BLD72 with the AA2791 Transformer. For wiring with the AA2793 Transformer, refer to Figure 9. Motor Connections Figure 5 is a hookup diagram for typical BLD72 driver applications. Wiring connected to inputs must be separated from motor connections and all other possible sources of interferen ...

  • Anaheim BLD72-1 - page 6

    6 3. 750 MA X 4. 500 3. 100 2. 500 1. 450 MA X 1. 500 .8 00 M A X 2. 350 3. 570 3. 000 Transformer Drawings Note: The AA2793 transformer is the same physical size as the AA2791, but it has two sets of second- ary windings (to power two drivers) and a dual primary winding for 115/230V operation. Figure 6: Transformer Dimensions Figure 8: AA2793 Tran ...

  • Anaheim BLD72-1 - page 7

    7 Figure 9: Wiring for different line voltages for the AA2793 transformer. ...

  • Anaheim BLD72-1 - page 8

    8 Note: The BLD72 and BLD72-1 are the same except for the base plate. The BLD72 is a replacement driver for use in Driver Packs. The BLD72-1 is a modular driver which has a larger base plate. Dimensions Drawings Figure 11: BLD72-1 Dimensions Figure 10: BLD72 Dimensions ...

  • Anaheim BLD72-1 - page 9

    9 13 Pin Terminal Description Motor Compatibility Add suffix “ S ” for single-ended shaft, or suffix “ D ” for double-ended shaft. Notes: Other motors not listed above may be compatible with this driver. Anaheim Automation carries a full-line of standard and high torque step motors. Contact the factory regarding compatibility. See back cove ...

  • Anaheim BLD72-1 - page 10

    10 Specifications Control Inputs (All) : (Terminals 5, 6, 8, 9) TTL-compatible Logic “ 0 ” - 0 to 0.8 V Logic “ 1 ” - 3.5 to 5.0 V Fault Reset: (Terminal 4) Pulled up to +5VDC through a 10k Ohm resistor Logic “ 1 ” (open) - Driver enabled and Fault detection enabled Logic “ 0 ” - Resets a Fault condition (driver is disabled when thi ...

  • Anaheim BLD72-1 - page 11

    11 Troubleshooting If a Fault occurs, reset the Fault by applying a logic “ 0 ” to the Reset Fault Input (terminal 4) for at least 100ms (or by cycling power OFF for at least 15 seconds). After resetting, try to run the motor again. If the driver faults again then check the conditions listed below. Is the LED blinking slowly? (Once a second) Th ...

  • Anaheim BLD72-1 - page 12

    12 Torque Speed Curves ANAHEIM AUTOMATION ...

Manufacturer Anaheim Category Power Supply

Documents that we receive from a manufacturer of a Anaheim BLD72-1 can be divided into several groups. They are, among others:
- Anaheim technical drawings
- BLD72-1 manuals
- Anaheim product data sheets
- information booklets
- or energy labels Anaheim BLD72-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Anaheim BLD72-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Anaheim BLD72-1, service manual, brief instructions and user manuals Anaheim BLD72-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Anaheim BLD72-1.

Similar manuals

A complete manual for the device Anaheim BLD72-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Anaheim BLD72-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Anaheim BLD72-1.

A complete Anaheim manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Anaheim BLD72-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Anaheim BLD72-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Anaheim BLD72-1, that we can find in the current document
3. Tips how to use the basic functions of the device Anaheim BLD72-1 - which should help us in our first steps of using Anaheim BLD72-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Anaheim BLD72-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Anaheim BLD72-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Anaheim BLD72-1?

Use the form below

If you did not solve your problem by using a manual Anaheim BLD72-1, ask a question using the form below. If a user had a similar problem with Anaheim BLD72-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)