English dropdown-ico

Manual Axis Communications Q6044-E

24 pages 1.89 mb
Download

Go to site of 24

Summary
  • Axis Communications Q6044-E - page 1

    AXIS Q60 Series AXIS Q6042-E PTZ Dome Network Camera AXIS Q6044-E PTZ Dome Network Camera AXIS Q6045-E PTZ Dome Network Camera E N G L I SH Installation Guide ...

  • Axis Communications Q6044-E - page 2

    Legal Considerations Video surveillance can be regulated by laws that vary from country to country . Check the laws in your local region before using this product for surveillance purposes. This product includes one (1) H.264 decoder license. T o purchase further licenses, contact your reseller . Liability Every care has been taken in the preparati ...

  • Axis Communications Q6044-E - page 3

    Australia/New Zealand This digital equipment fullls the requirements for RF emission according to the Class A limit of AS/NZS CISPR 22. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product. In a domestic environment this product may cause RF interference, in which case t ...

  • Axis Communications Q6044-E - page 4

    ...

  • Axis Communications Q6044-E - page 5

    AXIS Q60 Series Safety Infor mation Read through this Installation Guide carefully before installing the product. K eep the Installation Guide for future reference. Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could ...

  • Axis Communications Q6044-E - page 6

    AXIS Q60 Series Safety Instructions WARNING • The Axis product shall be installed by a trained professional. NO NO NO TICE TICE TICE • The Axis product shall be used in compliance with local laws and regulations. • Store the Axis product in a dry and ventilated environment. • Avoid exposing the Axis product to shocks or heavy pressure. • ...

  • Axis Communications Q6044-E - page 7

    AXIS Q60 Series WARNING • Risk of explosion if the battery is incorrectly replaced. • Replace only with an identical battery or a battery which is recommended by Axis. • Dispose of used batteries according to local regulations or the battery manufacturer's instructions. Dome Cover NO NO NO TICE TICE TICE • Be careful not to scratch, da ...

  • Axis Communications Q6044-E - page 8

    8 ...

  • Axis Communications Q6044-E - page 9

    AXIS Q60 Series Installation Guide This Installation Guide provides instructions for installing AXIS Q6042-E/Q6044-E/Q6045-E PTZ Dome Network Camera on your network. For other aspects of using the product, see the User Manual available at www .axis.com Installation Steps 1. Make sure the package contents, tools and other materials necessary for the ...

  • Axis Communications Q6044-E - page 10

    AXIS Q60 Series Optional Accessories • AXIS T91A Mounting Accessories • Smoked dome cover • RJ45 IP66-rated Cable with Premounted Connector (CAT6) 5 m • AXIS T83 10 Video Surveillance Control Board • AXIS T90A Illuminators • Installation Display • Midspan For information about available accessories, see www .axis.com Hardware Overview ...

  • Axis Communications Q6044-E - page 11

    AXIS Q60 Series 5 P art number (P/N) & Serial number (S/N) 6 P ower button 7 Heater 8 Control button 9 Status LED indicator 1 0 SD card slot (SDHC) Dome Cover 1 2 3 4 5 6 1 Dome bracket screw PH2 (4x) 2 Dome bracket 3 Rubber gasket 4 Dome ring 5 Dome ring screw T30 (4x) 6 Dome cover 1 1 E N G L I SH ...

  • Axis Communications Q6044-E - page 12

    AXIS Q60 Series Sunshield 2 1 1 Screw holes 2 Holes for unit holders LED Indicators LED Color Indication Unlit Connection and normal operation Amber Steady during startup. Flashes during rmware upgrade. Amber/red Flashes amber/red if network connection is unavailable or lost. Red Flashes red for rmware upgrade failure. Status Green Shows stea ...

  • Axis Communications Q6044-E - page 13

    AXIS Q60 Series Green, ashing Fast ash when input voltage is out of range or other internal error . AC Green Steady when AC power input connected. Connectors and Buttons For specications and operating conditions, see page 13 . Specications Operating Conditions The Axis product is intended for outdoor use. Product Classication Tempera ...

  • Axis Communications Q6044-E - page 14

    AXIS Q60 Series Install the Hardware NO NO NO TICE TICE TICE • The AXIS product shall be connected using a shielded network cable (STP). All cables connecting the product to the midspan shall be shielded (STP) and intended for their specic use. Make sure that the midspan is properly grounded. For information about regulatory requirements, see ...

  • Axis Communications Q6044-E - page 15

    AXIS Q60 Series 3. Make sure the rubber gasket is tted correctly on the dome cover . 4. Align the bulge on the dome cover with one of the logotypes on the dome ring. 5. Attach the dome bracket and the dome cover to the dome ring and tighten the screws (torque 1.2 Nm). 6. To install an SD card (not included), see Install an SD Card on page 15 . 7 ...

  • Axis Communications Q6044-E - page 16

    AXIS Q60 Series 3 4 2 1 5 1 Network connector – RJ45 Push-pull Connector (IP66) 2 Network connector and network connector shield 3 Ground screw T20 4 Washer 5 Cable shoe 5. Attach the grounding wire to the cable shoe using cable shoe pliers. 6. Put the cable shoe and washer back in their original positions and tighten the screw (torque 0.5 Nm). M ...

  • Axis Communications Q6044-E - page 17

    AXIS Q60 Series 1 2 3 4 1 Screw T30 (3x) 2 Slot for unit holder (3x) 3 Safety wire 4 Wall bracket (mounting example) 1 1. Install the supplied midspan. See page 17 . Install the Midspan The supplied midspan enables Axis network video products with high power consumption to receive data and power over the same network cable. 1. Connect the midspan ( ...

  • Axis Communications Q6044-E - page 18

    AXIS Q60 Series 1 2 3 4 1 Data and power out (connect to Axis product) 2 Data in (connect to network) 3 AC input LED indicator 4 P ort LED indicator 4. Make sure that the LEDs on the midspan indicate the correct conditions. See Midspan LED Indicators on page 12 . Access the Product Use the tools provided on the Installation and Management Software ...

  • Axis Communications Q6044-E - page 19

    AXIS Q60 Series 4. The process is now complete. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90 5. Using the installation and management software tools, assign an IP address, set the password and access the video stream. It is also possible to reset pa ...

  • Axis Communications Q6044-E - page 20

    ...

  • Axis Communications Q6044-E - page 21

    Regulatory I nformation USA This equipment has been tested using an unshielded network cable (UTP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. This equipment has also been tested using a shielded network cable (STP) and found to comply with the limits for a Class A digital device, pursuant ...

  • Axis Communications Q6044-E - page 22

    ...

  • Axis Communications Q6044-E - page 23

    ...

  • Axis Communications Q6044-E - page 24

    Installation Guide V er . M2.7 AXIS Q60 Series Date: July 20 14 © Axis Communications AB, 20 14 P art No. 58978 ...

Manufacturer Axis Communications Category Security Camera

Documents that we receive from a manufacturer of a Axis Communications Q6044-E can be divided into several groups. They are, among others:
- Axis Communications technical drawings
- Q6044-E manuals
- Axis Communications product data sheets
- information booklets
- or energy labels Axis Communications Q6044-E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Axis Communications Q6044-E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Axis Communications Q6044-E, service manual, brief instructions and user manuals Axis Communications Q6044-E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Axis Communications Q6044-E.

Similar manuals

A complete manual for the device Axis Communications Q6044-E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Axis Communications Q6044-E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Axis Communications Q6044-E.

A complete Axis Communications manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Axis Communications Q6044-E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Axis Communications Q6044-E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Axis Communications Q6044-E, that we can find in the current document
3. Tips how to use the basic functions of the device Axis Communications Q6044-E - which should help us in our first steps of using Axis Communications Q6044-E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Axis Communications Q6044-E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Axis Communications Q6044-E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Axis Communications Q6044-E?

Use the form below

If you did not solve your problem by using a manual Axis Communications Q6044-E, ask a question using the form below. If a user had a similar problem with Axis Communications Q6044-E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)