English dropdown-ico

Manual Canon MultiPASSTM C50

296 pages 2.97 mb
Download

Go to site of 296

Summary
  • Canon MultiPASSTM C50 - page 1

    Canon MultiP ASS C50 User ’ s Guide ENGLISH i Preface MultiP ASS TM C50 User ’ s Guide ...

  • Canon MultiPASSTM C50 - page 2

    Canon MultiP ASS C50 Hardware Manual ENGLISH ii Preface Although this equipment can use either loop disconnect or DTMF signalling, only the performance of the DTMF signalling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use DTMF signalling for access to public or priv ...

  • Canon MultiPASSTM C50 - page 3

    Canon MultiP ASS C50 Hardware Manual ENGLISH iii Preface Trademarks Adobe Photoshop H and Adobe PageMaker H are registered trademarks of Adobe Corporation. Canon H and BJ H are registered trademarks and MultiP ASS TM , UHQ TM , and Bubble J et TM are trademarks of Canon Inc. Centronics H is a registered trademark of Centronics Data Computer Corpora ...

  • Canon MultiPASSTM C50 - page 4

    Canon MultiP ASS C50 Hardware Manual ENGLISH iv Preface This CE Marking shows compliance of this equipment with Directive 73/23/EEC and Directive 89/336/EEC (as amended by Directive 92/31/EEC), both as amended by Directive 93/68/EEC. L ’estampille CE indique que ce matériel est conforme aux dispositions de la Directive 73/23/CEE et de la Directi ...

  • Canon MultiPASSTM C50 - page 5

    Canon MultiP ASS C50 Hardware Manual ENGLISH v Contents Contents Chapter 1 Introducing the MultiP ASS C50 ............................................................................... 1-1 W elcome ....................................................................................................................... 1-2 The Main Features of the Mu ...

  • Canon MultiPASSTM C50 - page 6

    Canon MultiP ASS C50 Hardware Manual ENGLISH vi Contents Selecting and Installing a BJ Cartridge .................................................................. 2-27 Guidelines for Using and Maintaining BJ Cartridges .............................. 2-27 Choosing the Best Cartridge .................................................................. ...

  • Canon MultiPASSTM C50 - page 7

    Canon MultiP ASS C50 Hardware Manual ENGLISH vii Contents Chapter 3 Speed Dialling ............................................................................................................. 3-1 Speed Dialling Methods ............................................................................................. 3-2 One-T ouch Speed Dialling ...... ...

  • Canon MultiPASSTM C50 - page 8

    Canon MultiP ASS C50 Hardware Manual ENGLISH viii Contents Chapter 5 Receiving F axes ........................................................................................................... 5-1 Different W ays to Receive a F ax .............................................................................. 5-2 Setting the Receive Mode .......... ...

  • Canon MultiPASSTM C50 - page 9

    Canon MultiP ASS C50 Hardware Manual ENGLISH ix Contents Chapter 8 T roubleshooting .......................................................................................................... 8-1 If Y ou Cannot Solve the Problem ............................................................................ 8-3 Problems Index .......................... ...

  • Canon MultiPASSTM C50 - page 10

    Canon MultiP ASS C50 Hardware Manual ENGLISH x Contents Appendix A Specifications .............................................................................................................. A-1 General ....................................................................................................................... A-2 Plain Paper F ax ... ...

  • Canon MultiPASSTM C50 - page 11

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-1 Chapter 1 Introducing the MultiP ASS C50 Chapter 1 Introducing the MultiP ASS C50 This chapter introduces you to your MultiP ASS C50 and describes its main features. It also explains the options and supplies available for use with your MultiP ASS C50. W elcome ........................................ ...

  • Canon MultiPASSTM C50 - page 12

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-2 Chapter 1 Introducing the MultiP ASS C50 W elcome Thank you for purchasing the new Canon MultiP ASS C50. W e are sure that your MultiP ASS C50 will help you work more effectively and help you meet your fax and phone requirements easily and conveniently , as well as your printing, copying, and scannin ...

  • Canon MultiPASSTM C50 - page 13

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-3 Chapter 1 Introducing the MultiP ASS C50 The Main Features of the MultiP ASS C50 The MultiP ASS C50 is a complete multifunction system for your home or small office . The MultiP ASS C50 combines the following essential office machines into a single , convenient desktop unit: J Plain-Paper F ax Mach ...

  • Canon MultiPASSTM C50 - page 14

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-4 Chapter 1 Introducing the MultiP ASS C50 Plain Paper Fax Features UHQ TM Image Processing System The MultiP ASS C50 uses Canon’s Ultra-High Quality Image Processing System to provide enhanced definition in faxed photos. Error Correction Mode (ECM) Using the MultiP ASS C50’s Error Correction Mode ...

  • Canon MultiPASSTM C50 - page 15

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-5 Chapter 1 Introducing the MultiP ASS C50 Colour Copier Features Colour and black and white copying The MultiP ASS C50 can make full colour copies. It can also make up to 99 black and white (including halftones) copies of a document at a time , at a rate of up to three copies per minute . 360-dpi reso ...

  • Canon MultiPASSTM C50 - page 16

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-6 Chapter 1 Introducing the MultiP ASS C50 Colour Printer Features Canon Bubble J et (BJ) printing and ink cartridges The MultiP ASS C50 uses Canon’s Bubble J et (BJ) printing and ink cartridges to provide you with first-rate , crisp print and vibrant colours, along with convenient, easy maintenance ...

  • Canon MultiPASSTM C50 - page 17

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-7 Chapter 1 Introducing the MultiP ASS C50 Colour Scanner Features Full colour and 256-lev el greyscale The MultiP ASS C50 Desktop Manager allows you to can scan images in full colour or with 256 levels of grey , rather than just in black and white, ensuring that the images are reproduced as clearly as ...

  • Canon MultiPASSTM C50 - page 18

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-8 Chapter 1 Introducing the MultiP ASS C50 Using the MultiP ASS C50 with the MultiP ASS Desktop Manager for Windows H Canon’s MultiP ASS Desktop Manager for W indows allows you to use the MultiP ASS C50’s printing, faxing, scanning, and telephone functions directly from your PC: J Use the MultiP AS ...

  • Canon MultiPASSTM C50 - page 19

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-9 Chapter 1 Introducing the MultiP ASS C50 Supplies and Options Y our MultiP ASS C50 uses Canon’s Bubble J et (BJ) cartridges and ink tanks, print media, and optional equipment, all designed to work with your MultiP ASS C50 to help you produce the finest output possible . These supplies are availabl ...

  • Canon MultiPASSTM C50 - page 20

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-10 Chapter 1 Introducing the MultiP ASS C50 Canon Photo Kit Canon’s optional Photo Kit enables the MultiP ASS C50 to use halftones to print photos beautifully . The kit includes the BC-22/22e Photo Colour BJ cartridge, the SB-21 BJ cartridge container, and 60 sheets of Canon high-resolution paper (HR ...

  • Canon MultiPASSTM C50 - page 21

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-11 Chapter 1 Introducing the MultiP ASS C50 Using Y our Documentation Y our MultiP ASS C50 includes the following documentation to help you learn how to use your unit quickly and easily: J User’ s Guide (this guide) – This guide provides detailed information on how to set up , operate , maintain, a ...

  • Canon MultiPASSTM C50 - page 22

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-12 Chapter 1 Introducing the MultiP ASS C50 J Look over Chapter 9, ”Maintaining Y our MultiP ASS C50” to become familiar with procedures for cleaning your MultiP ASS C50, replacing its Bubble J et (BJ) print cartridge and ink tanks. J Refer to Appendix A for the MultiP ASS C50’s technical speci? ...

  • Canon MultiPASSTM C50 - page 23

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-13 Chapter 1 Introducing the MultiP ASS C50 For Customer Support Y our MultiP ASS C50 is designed with the latest technology to provide trouble- free operation. If you have a problem with the unit’s operation, try to solve it by using the information in Chapter 8, ”T roubleshooting”. If you canno ...

  • Canon MultiPASSTM C50 - page 24

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-14 Chapter 1 Introducing the MultiP ASS C50 Safety Instructions Read these safety instructions thoroughly before using your MultiP ASS C50, and keep them handy in case you need to refer to them later. Except as specifically described in this manual, do not attempt to service the MultiP ASS C50 yoursel ...

  • Canon MultiPASSTM C50 - page 25

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-15 Chapter 1 Introducing the MultiP ASS C50 J Do not insert objects of any kind into the slots or openings on the MultiP ASS C50’s cabinet, as they could touch dangerous voltage points or short out parts, and result in fire or electric shock. J Do not allow small objects (such as pins, paper clips, ...

  • Canon MultiPASSTM C50 - page 26

    Canon MultiP ASS C50 Hardware Manual ENGLISH 1-16 Chapter 1 Introducing the MultiP ASS C50 Unplug the MultiP ASS C50 and contact your local authorised Canon dealer or the Canon help line in any of these situations: J If the power cord or plug is damaged or frayed. J If liquid spills into the unit, or if it is otherwise exposed to rain or liquids. J ...

  • Canon MultiPASSTM C50 - page 27

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-1 Chapter 2 Setting Up Y our MultiP ASS C50 Chapter 2 Setting Up Y our MultiP ASS C50 This chapter tells you how to unpack and assemble your MultiP ASS C50, select and install the Bubble J et (BJ) print cartridge, load the paper , and enter your user information – everything you need to know to get y ...

  • Canon MultiPASSTM C50 - page 28

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-2 Chapter 2 Setting Up Y our MultiP ASS C50 Selecting and Loading the Print Media ................................................................. 2-37 Selecting the Print Media ............................................................................. 2-37 Plain Media ............................. ...

  • Canon MultiPASSTM C50 - page 29

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-3 Chapter 2 Setting Up Y our MultiP ASS C50 Choosing a Location for Y our MultiP ASS C50 Before unpacking your MultiP ASS C50, follow these guidelines to choose the best location for it. Please review the information provided in ”Safety Instructions” on page 1-14, to make sure you are installing yo ...

  • Canon MultiPASSTM C50 - page 30

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-4 Chapter 2 Setting Up Y our MultiP ASS C50 618 mm 365 mm 400 mm 482 mm 281 mm If you need help installing your MultiP ASS C50 or have any questions about it, please contact your local authorised Canon dealer or service centre . ...

  • Canon MultiPASSTM C50 - page 31

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-5 Chapter 2 Setting Up Y our MultiP ASS C50 Unpacking Y our MultiP ASS C50 F ollow the directions below to unpack your MultiP ASS C50 properly , and to make sure you have all of its components and documentation. Do Y ou Have Everything? As you unpack the MultiP ASS C50, save the carton and packing mate ...

  • Canon MultiPASSTM C50 - page 32

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-6 Chapter 2 Setting Up Y our MultiP ASS C50 2. Make sure you have the following items: MultiP ASS C50 UNIT SENDING DOCUMENT SUPPORT DOCUMENT SUPPOR T FOR SCANNED DOCUMENTS OUTPUT TRA Y EXTENSION POWER CORD* P ARALLEL CABLE TELEPHONE LINE** FERRITE CORE BC-20 BLACK BJ CARTRIDGE BC-21/22e COLOUR BJ CARTR ...

  • Canon MultiPASSTM C50 - page 33

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-7 Chapter 2 Setting Up Y our MultiP ASS C50 J If any of the above items are damaged or missing, notify your Canon dealer immediately . ...

  • Canon MultiPASSTM C50 - page 34

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-8 Chapter 2 Setting Up Y our MultiP ASS C50 Removing Shipping Materials When unpacking your MultiP ASS C50, remove the tape and cardboard that are inserted into the unit to protect it during shipping. Do this as follows: 1. Remove all pieces of shipping tape from the outside of the MultiP ASS C50. 2. R ...

  • Canon MultiPASSTM C50 - page 35

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-9 Chapter 2 Setting Up Y our MultiP ASS C50 3. Open the operation panel by grasping it with both hands and gently pulling it toward you. 4. Remove the soft styrofoam sheet from the unit’s A utomatic Document Feeder (ADF), then gently push the operation panel shut until it clicks. ...

  • Canon MultiPASSTM C50 - page 36

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-10 Chapter 2 Setting Up Y our MultiP ASS C50 5. Peel the clear protective sheet off of the LCD display . ...

  • Canon MultiPASSTM C50 - page 37

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-11 Chapter 2 Setting Up Y our MultiP ASS C50 Assembling the MultiP ASS C50 Use the following instructions to assemble your MultiP ASS C50 main unit and components. T o see how the MultiP ASS C50 will look fully assembled, see ”Getting Acquainted with Y our MultiP ASS C50” on page 2-20. Attaching Co ...

  • Canon MultiPASSTM C50 - page 38

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-12 Chapter 2 Setting Up Y our MultiP ASS C50 Attaching the Document Support The document support catches documents as they come out of the MultiP ASS C50 after being faxed or scanned. Y ou can operate the MultiP ASS C50 with or without this support. The ends of the metal support fit into the slots on ...

  • Canon MultiPASSTM C50 - page 39

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-13 Chapter 2 Setting Up Y our MultiP ASS C50 Attaching the Output Tray Extension The output tray extension catches printed pages as they come out of the MultiP ASS C50’s output tray . The ends of the metal support fit into the slots on the output tray , as shown below . T o install it, squeeze the e ...

  • Canon MultiPASSTM C50 - page 40

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-14 Chapter 2 Setting Up Y our MultiP ASS C50 Making Connections Connecting the MultiP ASS C50 to Y our PC Y our MultiP ASS C50 has an 8-bit, bi-directional parallel interface port that allows you to connect it to your PC. Use the parallel cable and ferrite core provided with your MultiP ASS C50. If you ...

  • Canon MultiPASSTM C50 - page 41

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-15 Chapter 2 Setting Up Y our MultiP ASS C50 3. Open the ferrite core and attach it to the parallel cable near the end closest to the MultiP ASS C50 unit. 4. Connect the other end of the cable to the parallel interface port on your computer. a. Align the cable connector with the interface port so their ...

  • Canon MultiPASSTM C50 - page 42

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-16 Chapter 2 Setting Up Y our MultiP ASS C50 Connecting the T elephone Line Connect the MultiP ASS C50 to a telephone line as follows: 1. Connect one end of the supplied telephone line to the jack marked on the side of the MultiP ASS C50. 2. Connect the other end of the line to your wall telephone jack ...

  • Canon MultiPASSTM C50 - page 43

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-17 Chapter 2 Setting Up Y our MultiP ASS C50 Connecting the Optional Handset, Extension Phone or Answering Machine T o use your MultiP ASS C50 to make or receive normal telephone calls, you must connect the optional handset or an extension telephone . Y ou can also attach an answering machine (with or ...

  • Canon MultiPASSTM C50 - page 44

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-18 Chapter 2 Setting Up Y our MultiP ASS C50 Connecting the Power Cord F ollow these guidelines when connecting your MultiP ASS C50 to a power source: J The MultiP ASS C50 is intended for domestic use only and requires 200-240 V AC. Do not use it outside the country where it was purchased. J Use only t ...

  • Canon MultiPASSTM C50 - page 45

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-19 Chapter 2 Setting Up Y our MultiP ASS C50 2. Plug the other end of the power cord into the outlet. The MultiP ASS C50 has no power switch, so its power is on as long as it is plugged in. Once connected, though, the unit still needs to warm up before you can use it. Depending on the number of pages a ...

  • Canon MultiPASSTM C50 - page 46

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-20 Chapter 2 Setting Up Y our MultiP ASS C50 Getting Acquainted with Y our MultiP ASS C50 Before using your MultiP ASS C50, look over the diagrams on these pages to become familiar with the unit’s components and their functions. Front V iew Paper Rest Paper Guide Sheet Feeder Printer Cover Operation ...

  • Canon MultiPASSTM C50 - page 47

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-21 Chapter 2 Setting Up Y our MultiP ASS C50 Rear V iew Power Connector Manual Feeder Bi-Directional Parallel Port T elephone Line Jack Optional Handset/ T elephone/ Answering Machine Jack The Handset (Option) F or a description of the optional handset components, see Appendix B . ...

  • Canon MultiPASSTM C50 - page 48

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-22 Chapter 2 Setting Up Y our MultiP ASS C50 Inside the Printer Cover Paper Thickness Lever Cartridge Holder ...

  • Canon MultiPASSTM C50 - page 49

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-23 Chapter 2 Setting Up Y our MultiP ASS C50 The Operation Panel 1 2 ABC 3 DEF 4 5 JKL GHI 6 MNO 7 8 TUV PQRS 9 WXYZ 0 /PAUSE RECEIVE MODE RESOLUTION ALARM CODED DIAL 123 456 PRINTER RESET TONE/+ D.T. R CARTRIDGE FUNCTION RESUME A Document Feed Lever B Receive Mode C LCD Display D Resolution E One-T ou ...

  • Canon MultiPASSTM C50 - page 50

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-24 Chapter 2 Setting Up Y our MultiP ASS C50 E One-T ouch Speed Dial/Special Function buttons Use these buttons for one-touch speed dialling, entering user information, and to perform special operations. See pages 2-25 and 2-26 for details on the special function buttons. F Numeric buttons Use these bu ...

  • Canon MultiPASSTM C50 - page 51

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-25 Chapter 2 Setting Up Y our MultiP ASS C50 Special Function Buttons 123 456 PRINTER RESET TONE/+ D.T. R CARTRIDGE FUNCTION RESUME J FUNCTION button Use this button to access different functions, such as when entering user information, running the MultiP ASS C50’s self-cleaning process, checking the ...

  • Canon MultiPASSTM C50 - page 52

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-26 Chapter 2 Setting Up Y our MultiP ASS C50 J D .T . button 5 Press this button to confirm the dial tone when dialling a telephone/fax number. See page 4-23 for details. J R button 6 Press this button to dial the outside line number when the unit is connected through a switchboard (PBX). See page 4-2 ...

  • Canon MultiPASSTM C50 - page 53

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-27 Chapter 2 Setting Up Y our MultiP ASS C50 Selecting and Installing a BJ Cartridge Canon offers a number of Bubble J et (BJ) cartridges to meet a wide range of printing requirements. This section describes how to select the best BJ cartridge for your needs, as well as how to install and maintain the ...

  • Canon MultiPASSTM C50 - page 54

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-28 Chapter 2 Setting Up Y our MultiP ASS C50 Hold the BJ cartridge by its sides only . Do not touch the print head, the sharp edges around the print head, the silver plate on the bottom of the cartridge , or the silver metal or circuit area on its side . PRINT HEAD J Make sure the BJ cartridge holder i ...

  • Canon MultiPASSTM C50 - page 55

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-29 Chapter 2 Setting Up Y our MultiP ASS C50 Choosing the Best Cartridge Canon offers several BJ print cartridges and ink tanks for use in the MultiP ASS C50. (BJ print cartridges contain the BJ print head and ink, while BJ ink tanks contain only ink.) Use the following descriptions to decide which typ ...

  • Canon MultiPASSTM C50 - page 56

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-30 Chapter 2 Setting Up Y our MultiP ASS C50 BC-22/22e Photo Colour BJ Cartridge Includes the print head and colour ink in a single unit. Use this cartridge for printing photo-realistic colour images. BC-29F Fluorescent BJ Cartridge Includes the print head and colour ink in a single unit. Use this cart ...

  • Canon MultiPASSTM C50 - page 57

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-31 Chapter 2 Setting Up Y our MultiP ASS C50 Installing the BJ Cartridge T o install your BJ cartridge , follow these steps: 1. Make sure the MultiP ASS C50 is plugged in. 2. Press CAR TRIDGE . CARTRIDGE J The cartridge holder moves toward the centre of the unit. 3. Open the printer cover by grasping t ...

  • Canon MultiPASSTM C50 - page 58

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-32 Chapter 2 Setting Up Y our MultiP ASS C50 J Hold the BJ cartridge by its sides only . Do not touch the print head, the sharp edges around the print head, the silver plate on the bottom of the cartridge , or the silver metal or circuit area on its side . PRINT HEAD 4. Raise the green cartridge lock l ...

  • Canon MultiPASSTM C50 - page 59

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-33 Chapter 2 Setting Up Y our MultiP ASS C50 5. Peel the protective foil off the new BJ cartridge’s protective packaging, and remove the cartridge . 6. Lift the orange cap off the cartridge’s print head, then remove the orange tape . Discard the cap and tape immediately . Never attempt to re-attach ...

  • Canon MultiPASSTM C50 - page 60

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-34 Chapter 2 Setting Up Y our MultiP ASS C50 7. Hold the cartridge so the label faces outward, tilt it slightly forward and to the right, then slide it into the cartridge holder. DO NOT TOUCH THE GUIDE RAIL DO NOT TOUCH THE RIBBON CABLE DO NOT TOUCH THE ROUND SHAFT 8. Lower the green lock lever complet ...

  • Canon MultiPASSTM C50 - page 61

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-35 Chapter 2 Setting Up Y our MultiP ASS C50 9. Set the paper thickness lever. F or printing on plain paper: Cartridge Thickness Lev er P osition BC-21/21e Colour BJ Cartridge (black) centre BC-21/21e Colour BJ Cartridge (colour) centre BC-20 Black BJ Cartridge left BC-22/22e Photo Colour BJ Cartridge ...

  • Canon MultiPASSTM C50 - page 62

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-36 Chapter 2 Setting Up Y our MultiP ASS C50 Storing BJ Cartridges Once a BJ cartridge is unwrapped, its print head must be kept from drying out, or it can clog and fail to work properly . A cartridge installed in the MultiP ASS C50 is protected from drying out by automatically moving to the home posit ...

  • Canon MultiPASSTM C50 - page 63

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-37 Chapter 2 Setting Up Y our MultiP ASS C50 Selecting and Loading the Print Media The MultiP ASS C50 can provide sharp black or vibrant colour printing on a wide variety of media, including A4, letter, and legal plain paper , glossy paper, envelopes, transparencies, back print film (for display on a ...

  • Canon MultiPASSTM C50 - page 64

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-38 Chapter 2 Setting Up Y our MultiP ASS C50 Canon Media Canon provides the following media, all specifically developed to extend the printing capability of your MultiP ASS C50. F or details or purchase, contact your local authorised Canon dealer. Canon Bubble J et P aper LC-301 (water resistant) This ...

  • Canon MultiPASSTM C50 - page 65

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-39 Chapter 2 Setting Up Y our MultiP ASS C50 Canon High-Gloss Film HG-101 This is a high-grade gloss film that lets you create sharper and more vivid colour output than is possible with coated paper. This film provides the best colour print quality for the BC-21/21e Colour BJ cartridge . Use this fi ...

  • Canon MultiPASSTM C50 - page 66

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-40 Chapter 2 Setting Up Y our MultiP ASS C50 The Printable Area T o ensure the best print quality , make sure the text or graphics you create stay within the printable areas shown below . If not, you can get poor print quality or line feeding problems. (F or example, printing outside the bottom margin ...

  • Canon MultiPASSTM C50 - page 67

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-41 Chapter 2 Setting Up Y our MultiP ASS C50 Envelopes The shaded portion below shows the printable area for envelopes. e f d a bc Printable Area: European DL U .S. Commercial No. 10 a 220 mm a 9.5 ) b 6.4 mm b 0.25 ) c 10.4 mm c 1.2 ) d 110 mm d 4.1 ) e 3.0 mm e 0.12 ) f 7.0 mm f 0.27 ) ...

  • Canon MultiPASSTM C50 - page 68

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-42 Chapter 2 Setting Up Y our MultiP ASS C50 Adjusting the Paper Thickness Lever Before loading a print medium into the MultiP ASS C50, use the paper thickness lever to adjust the gap between the print head and the print paper to suit the paper’s thickness. If the gap between the print head and the p ...

  • Canon MultiPASSTM C50 - page 69

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-43 Chapter 2 Setting Up Y our MultiP ASS C50 3. Set the paper thickness lever to left, centre , or right according to the following table: Lev er position Medium Black Colour Plain paper Left Centre LC-301 water resistant paper Left Centre Envelopes Right HR-101 high-resolution paper Centre GP-101 glos ...

  • Canon MultiPASSTM C50 - page 70

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-44 Chapter 2 Setting Up Y our MultiP ASS C50 Loading the Print Media Keep the following in mind when selecting or loading media for your MultiP ASS C50: J Y ou can stack plain paper, envelopes, and other media in the MultiP ASS C50’s sheet feeder . The maximum size of the stack depends on the medium: ...

  • Canon MultiPASSTM C50 - page 71

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-45 Chapter 2 Setting Up Y our MultiP ASS C50 Loading Print Media for Automatic Feed The MultiP ASS C50’s sheet feeder can handle media of the following sizes: P aper size: A4 210 × 297 mm Letter 8.5 ) × 11 ) Legal 8.5 ) × 14 ) Env elope size: European DL envelopes 220 × 110 mm U .S . Commercial N ...

  • Canon MultiPASSTM C50 - page 72

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-46 Chapter 2 Setting Up Y our MultiP ASS C50 3. Pick up a stack of sheets and fan the edge that will feed into the MultiP ASS C50 first, then tap the stack on a flat surface to even its edges. 4. Insert the stack into the sheet feeder until its stops, so that the right edge of the stack is aligned wi ...

  • Canon MultiPASSTM C50 - page 73

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-47 Chapter 2 Setting Up Y our MultiP ASS C50 Make sure the top of the stack is below the paper limit mark . P APER LIMIT MARK 5. Slide the paper guide snugly against the sides of the stack. Y ou are now ready to print. J Many media have a ”right” side for printing. If you are using such a medium, m ...

  • Canon MultiPASSTM C50 - page 74

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-48 Chapter 2 Setting Up Y our MultiP ASS C50 Glossy paper Use the following procedure to load GP-101 glossy paper. F or best results, load only one sheet of glossy paper into the sheet feeder at a time . 1. Open the printer cover by grasping the document guides and lifting. J Make sure the paper thickn ...

  • Canon MultiPASSTM C50 - page 75

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-49 Chapter 2 Setting Up Y our MultiP ASS C50 Loading Print Media for Manual Feed F ollow the steps below to manually feed heavier -weight media (90-105 g/m 2 ) into the MultiP ASS C50. Y ou will need to select manual feed from the print dialog box of your Windows application before printing. (See the M ...

  • Canon MultiPASSTM C50 - page 76

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-50 Chapter 2 Setting Up Y our MultiP ASS C50 Using Canon’ s Specialty Papers Canon provides several different specialty papers you can use with your MultiP ASS C50. Printing on High Resolution Paper HR-101 Use the following procedure to load High Resolution Paper HR-101: 1. Open the printer cover by ...

  • Canon MultiPASSTM C50 - page 77

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-51 Chapter 2 Setting Up Y our MultiP ASS C50 2. W ith the sticky side up and near the bottom of the cleaning sheet, align the sheet with the right edge of the sheet feeder and slide it in until it stops. 3. Adjust the paper guide to the edge of the cleaning sheet. 4. Press FUNCTION , then use or to sel ...

  • Canon MultiPASSTM C50 - page 78

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-52 Chapter 2 Setting Up Y our MultiP ASS C50 Printing on FS-101 Fabric Sheets F ollow these steps to load and print on Canon’s FS-101 fabric sheets. J Read and follow the precautions and handling instructions included with the FS-101 fabric sheets. J Do not use the fixing agent that is supplied with ...

  • Canon MultiPASSTM C50 - page 79

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-53 Chapter 2 Setting Up Y our MultiP ASS C50 Using the Paper Output Guides with the BC-22/22e and BC-29F Cartridges When printing with the BC-22/22e Photo Colour or BC-29F BJ Fluorescent cartridge on HR-101 high-resolution paper, you should use the guides on the MultiP ASS C50’s paper output tray to ...

  • Canon MultiPASSTM C50 - page 80

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-54 Chapter 2 Setting Up Y our MultiP ASS C50 Entering User Information in the MultiP ASS C50 When sending documents, you can have your fax number, your name , and the current date and time printed out by the receiving fax. This information is called your T ransmit T erminal Identification, or TTI, and ...

  • Canon MultiPASSTM C50 - page 81

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-55 Chapter 2 Setting Up Y our MultiP ASS C50 Guidelines for Entering Information The following section explains how to enter user information into the MultiP ASS C50. J If you pause while entering information and do not make an entry for more than 60 seconds, the MultiP ASS C50 returns to standby mode ...

  • Canon MultiPASSTM C50 - page 82

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-56 Chapter 2 Setting Up Y our MultiP ASS C50 Entering Numbers, Letters, and Symbols Each numeric button has a number and a group of uppercase and lowercase letters assigned to it. Use the chart below to determine which number button to press for each character. Button Uppercase Low ercase 1 2 ABCÅÄÁ ...

  • Canon MultiPASSTM C50 - page 83

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-57 Chapter 2 Setting Up Y our MultiP ASS C50 Entering a single letter F or example, you would enter a lowercase letter ”b” like this: 1. Press * until an ”a” appears on the right of the display . :a 2. Press 2 twice to display ”b” on the left of the display . 2 ABC 2 ABC b: a Entering two l ...

  • Canon MultiPASSTM C50 - page 84

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-58 Chapter 2 Setting Up Y our MultiP ASS C50 Entering Y our Identification Information The following pages show you how to enter your name or company name , your fax number, and the date and time , and how to select the type of telephone line connected to your MultiP ASS C50. 1. Press FUNCTION . FUNCT ...

  • Canon MultiPASSTM C50 - page 85

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-59 Chapter 2 Setting Up Y our MultiP ASS C50 7. Press ST ART/COPY to save the fax/telephone number . UNIT NAME 8. Press ST AR T/COPY again, then use the numeric buttons to enter your name or your business name . 1 2 ABC 3 DEF 4 5 JKL GHI 6 MNO 7 8 TUV PQRS 9 WXYZ 0 CANO N: A J F or more details on ente ...

  • Canon MultiPASSTM C50 - page 86

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-60 Chapter 2 Setting Up Y our MultiP ASS C50 Editing Y our Identification Information If you ever need to change the user name , fax number, or phone line type , or to reset the date or time , you can use the procedures above to display the settings you need to change , then edit them using the numeri ...

  • Canon MultiPASSTM C50 - page 87

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-61 Chapter 2 Setting Up Y our MultiP ASS C50 The MultiP ASS C50 Settings T o customise the MultiP ASS C50 to your particular needs, you can adjust general operation, sending, receiving, and speed dialling settings. There are two methods of customising these settings: Method 1: Using the MultiP ASS Desk ...

  • Canon MultiPASSTM C50 - page 88

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-62 Chapter 2 Setting Up Y our MultiP ASS C50 General Settings Setting Description Desktop Manager Setting Name Operation P anel Setting Name Setting the date and time * D A TE & TIME See page 2-58 Setting the date format Date F ormat – Setting the language used on the MultiP ASS C50 LCD display D ...

  • Canon MultiPASSTM C50 - page 89

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-63 Chapter 2 Setting Up Y our MultiP ASS C50 Sending Settings Setting Description Desktop Manager Setting Name Operation P anel Setting Name Setting the name that appears in the header of the faxes you send – Heading – Company UNIT N AME See page 2-58 Setting the fax/telephone number that appears i ...

  • Canon MultiPASSTM C50 - page 90

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-64 Chapter 2 Setting Up Y our MultiP ASS C50 Setting Description Desktop Manager Setting Name Operation P anel Setting Name Setting the contrast of the faxes you send Image Contrast SCAN CONTRAST See page 4-4 Setting the position of the fax heading information (TTI) F ax Heading P osition – Setting w ...

  • Canon MultiPASSTM C50 - page 91

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-65 Chapter 2 Setting Up Y our MultiP ASS C50 Receive Settings Setting Description Desktop Manager Setting Name Operation P anel Setting Name Setting the size of the paper used for printing a fax Paper Size – Setting whether an incoming fax is reduced to fit on the paper Reduction – Setting the rec ...

  • Canon MultiPASSTM C50 - page 92

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-66 Chapter 2 Setting Up Y our MultiP ASS C50 Setting Description Desktop Manager Setting Name Operation P anel Setting Name Setting whether you want to print documents in the Desktop Manager using a reduced amount of ink Ink Saver Mode – Setting fax/telephone switching options – Listen T ime before ...

  • Canon MultiPASSTM C50 - page 93

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-67 Chapter 2 Setting Up Y our MultiP ASS C50 Speed Dialling Settings Setting Description Desktop Manager Setting Name Operation P anel Setting Name Setting one-touch speed dialling numbers See the Speed Dial tab 1-TOUCH SPD DIAL See page 3-3 Setting coded speed dialling numbers See the Speed Dial tab C ...

  • Canon MultiPASSTM C50 - page 94

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-68 Chapter 2 Setting Up Y our MultiP ASS C50 The MultiP ASS C50 Unit Settings Details on the settings that can be adjusted from the MultiP ASS C50 operation panel are listed in the table below . F or detailed instructions on accessing these settings, refer to the page numbers indicated in the table . T ...

  • Canon MultiPASSTM C50 - page 95

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-69 Chapter 2 Setting Up Y our MultiP ASS C50 Setting Description Settings P age ALARM V OLUME Sets the volume of the error alarm sound. V OL MID /VOL MAX/ OFF/V OL MIN 2-71 LINE MONITOR V OL Sets the volume of the line monitor (sound during dialling). V OL MID /VOL MAX/ OFF/V OL MIN 2-71 RX CALL LEVEL ...

  • Canon MultiPASSTM C50 - page 96

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-70 Chapter 2 Setting Up Y our MultiP ASS C50 Setting Description Settings P age DISPLA Y LANGU AGE Sets the language for the message displayed in the LCD during operation of the unit. ENGLISH /FRENCH/ SP ANISH/GERMAN/ IT ALIAN/DUTCH/ FINNISH/ POR TUGUESE/ NOR WEGIAN/ SWEDISH/D ANISH/ SLO VENE/CZECH/ HU ...

  • Canon MultiPASSTM C50 - page 97

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-71 Chapter 2 Setting Up Y our MultiP ASS C50 Accessing the MultiP ASS C50 Unit Settings The following section describes how to access some of the settings listed on pages 2-68 to 2-70. T o Access the VOLUME CONTROL Settings (CALLING VOLUME, KEYP AD VOLUME, ALARM VOLUME, LINE MONITOR VOL) 1. Press FUNCT ...

  • Canon MultiPASSTM C50 - page 98

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-72 Chapter 2 Setting Up Y our MultiP ASS C50 8. Use or to select the new setting. Ex: 12 VOL MAX 9. Press ST AR T/COPY . Ex: ALARM VOLUME J The new setting will not be effective until you press the (ST ART/ COPY) button. 10. Press ST OP to return to standby mode . 13:00 FaxOnly T o Access the RX CALL L ...

  • Canon MultiPASSTM C50 - page 99

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-73 Chapter 2 Setting Up Y our MultiP ASS C50 5. Press ST ART/COPY . Ex: STANDARD J The current setting is displayed. 6. Continue with Step 4 below . T o access the MID P A USE SET and DISPLA Y LANGU AGE settings: 2. Use or to select the setting you want to set or change . Ex: 12 MID PAUSE SET J Select ...

  • Canon MultiPASSTM C50 - page 100

    Canon MultiP ASS C50 Hardware Manual ENGLISH 2-74 Chapter 2 Setting Up Y our MultiP ASS C50 T esting the MultiP ASS C50 After you have assembled your MultiP ASS C50, installed a BJ cartridge , loaded the print media, and entered your user identification information, you can make sure the MultiP ASS C50 is printing properly by making several copies ...

  • Canon MultiPASSTM C50 - page 101

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-1 Chapter 3 Speed Dialling Chapter 3 Speed Dialling This chapter describes how to register and use the speed dialling features of the MultiP ASS C50. Speed Dialling Methods ............................................................................................. 3-2 One-T ouch Speed Dialling ...... ...

  • Canon MultiPASSTM C50 - page 102

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-2 Chapter 3 Speed Dialling Speed Dialling Methods In addition to manual dialling, the MultiP ASS C50 provides several ways to dial fax numbers automatically . J One-touch speed dialling Dial a fax number by pressing the one-touch speed dialling button that the number is assigned to. J Coded speed diall ...

  • Canon MultiPASSTM C50 - page 103

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-3 Chapter 3 Speed Dialling One-T ouch Speed Dialling Storing Numbers for One-T ouch Speed Dialling Y our MultiP ASS C50 can store up to 6 of your most frequently dialled numbers under the one-touch speed dialling buttons. Y ou can register the numbers directly from the MultiP ASS C50 operation panel or ...

  • Canon MultiPASSTM C50 - page 104

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-4 Chapter 3 Speed Dialling 6. Press ST ART/COPY again, then use the numeric buttons to enter the telephone/fax number you want to store . Ex: 1 2 ABC 3 DEF 4 5 JKL GHI 6 MNO 7 8 TUV PQRS 9 WXYZ 0 TEL=516 488 6700 J The telephone/fax number can be up to 120 digits long. J Press the button to enter space ...

  • Canon MultiPASSTM C50 - page 105

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-5 Chapter 3 Speed Dialling Changing a Number/Name Stored under a One-T ouch Speed Dialling Button F ollow these steps if you want to change a number and/or name registered under a one-touch speed dialling button, or if you want to delete all information stored in a button. 1. Press FUNCTION . FUNCTION ...

  • Canon MultiPASSTM C50 - page 106

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-6 Chapter 3 Speed Dialling T o delete a number: 6. Press until the whole number is deleted, then press ST ART/COPY . 1 NAME J When you delete a number, the name registered for that number is also deleted. 7. When you have finished deleting numbers, press ST OP to return to standby mode . 14:38 FaxOnly ...

  • Canon MultiPASSTM C50 - page 107

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-7 Chapter 3 Speed Dialling 9. Press ST ART/COPY . 05=905 795 1111 J T o change additional numbers and/or names repeat steps 4 to 9. 10. When you are finished changing numbers and/or names, press ST OP to return to standby mode . 14:38 FaxOnly ...

  • Canon MultiPASSTM C50 - page 108

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-8 Chapter 3 Speed Dialling Using One-T ouch Speed Dialling After registering your one-touch speed dialling numbers, you can use them to send documents as follows: Be sure to adjust the document feed lever before loading your document. See page 6-5 for details. 1. Prepare the document and load it, face ...

  • Canon MultiPASSTM C50 - page 109

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-9 Chapter 3 Speed Dialling J If you do not press the (ST ART/COPY) button within five seconds, the MultiP ASS C50 will begin sending automatically . J If an error occurs during sending, the MultiP ASS C50 will print an error report. If this happens, try sending the fax again. See ”F axing Problems? ...

  • Canon MultiPASSTM C50 - page 110

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-10 Chapter 3 Speed Dialling Coded Speed Dialling Storing Numbers for Coded Speed Dialling Y ou can store up to 50 telephone/fax numbers for coded speed dialling. As with one-touch speed dialling, you can register the numbers directly from the operation panel of the MultiP ASS C50 or from the Desktop Ma ...

  • Canon MultiPASSTM C50 - page 111

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-11 Chapter 3 Speed Dialling 7. Use the numeric buttons to enter the telephone/fax number you want to store . Ex: 1 2 ABC 3 DEF 4 5 JKL GHI 6 MNO 7 8 TUV PQRS 9 WXYZ 0 TEL= 7390802 J The telephone/fax number can be up to 120 digits long. J Press the button to enter spaces between numbers (spaces are opt ...

  • Canon MultiPASSTM C50 - page 112

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-12 Chapter 3 Speed Dialling Changing a Number/Name Stored under a Coded Speed Dialling Code F ollow these steps if you want to change the number and/or name registered under a coded speed dialling code , or if you want to delete all information stored under a code . 1. Press FUNCTION . FUNCTION FUNCTIO ...

  • Canon MultiPASSTM C50 - page 113

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-13 Chapter 3 Speed Dialling T o delete a number: 7. Press until the whole number is deleted, then press ST ART/COPY . 1 NAME J When you delete a number, the name registered for that number is also deleted. 8. When you are finished deleting numbers, press ST OP to return to the standby mode . 14:38 Fax ...

  • Canon MultiPASSTM C50 - page 114

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-14 Chapter 3 Speed Dialling 10. Press ST ART/COPY . * 06= 49 39 25 25 J T o change additional number and/or names, repeat steps 5 to 10. 11. Press ST OP to return to the standby mode . 14:38 FaxOnly ...

  • Canon MultiPASSTM C50 - page 115

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-15 Chapter 3 Speed Dialling Using Coded Speed Dialling After registering your coded speed dialling numbers, you can use them to send documents as follows: Be sure to adjust the document feed lever before loading your document. See page 6-5 for details. 1. Prepare the document and load it, face down, in ...

  • Canon MultiPASSTM C50 - page 116

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-16 Chapter 3 Speed Dialling J If you do not press the (ST ART/COPY) button within five seconds, the MultiP ASS C50 will begin sending automatically . J If an error occurs during sending, the MultiP ASS C50 will print an error report. If this happens, try sending the fax again. See ”F axing Problems? ...

  • Canon MultiPASSTM C50 - page 117

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-17 Chapter 3 Speed Dialling Group Dialling If you frequently send faxes to the same group of people , you can create a ”group . ” Groups are stored under one-touch speed dialling buttons or coded speed dialling codes and are entered from the MultiP ASS C50 operation panel or from the MultiP ASS Des ...

  • Canon MultiPASSTM C50 - page 118

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-18 Chapter 3 Speed Dialling T o store a group under a one-touch speed dialling button: 5. Use or buttons to select an unused one-touch speed dialling button (01 to 06). 12 01= J If a group or number is already registered under the button you select, GROUP DIAL or 1-T OUCH SPD DIAL is displayed. T o sto ...

  • Canon MultiPASSTM C50 - page 119

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-19 Chapter 3 Speed Dialling 7. Enter the speed dialling numbers you want to store in the group: J T o enter a number stored under a one-touch speed dialling button, press FUNCTION , press the desired one-touch speed dialling button(s), then FUNCTION again. FUNCTION 1 6 ~ R FUNCTION J T o enter a number ...

  • Canon MultiPASSTM C50 - page 120

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-20 Chapter 3 Speed Dialling 8. Press ST ART/COPY twice , then use the numeric buttons to enter a name for the group . 1 2 ABC 3 DEF 4 5 JKL GHI 6 MNO 7 8 TUV PQRS 9 WXYZ 0 NAME CANON GROUP 1: 1 J See page 2-56 for details on entering letters. J Y ou can enter up to 16 characters for the name. 9. Press ...

  • Canon MultiPASSTM C50 - page 121

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-21 Chapter 3 Speed Dialling Using Group Dialling T o send a fax to a group , follow these instructions. Be sure to adjust the document feed lever before loading your document. See page 6-5 for details. 1. Prepare the document and load it, face down, into the A utomatic Document Feeder (ADF). J If neces ...

  • Canon MultiPASSTM C50 - page 122

    Canon MultiP ASS C50 Hardware Manual ENGLISH 3-22 Chapter 3 Speed Dialling ...

  • Canon MultiPASSTM C50 - page 123

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-1 Chapter 4 Sending F axes Chapter 4 Sending Faxes This chapter describes how to use your MultiP ASS C50 to send faxes. Preparing to Send a F ax ............................................................................................. 4-3 Setting the Resolution and Contrast ........................ ...

  • Canon MultiPASSTM C50 - page 124

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-2 Chapter 4 Sending F axes ...

  • Canon MultiPASSTM C50 - page 125

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-3 Chapter 4 Sending F axes Preparing to Send a Fax Before you can send a fax, you need to load the document into the MultiP ASS C50’s A utomatic Document Feeder (ADF). F or instructions and information about the types of documents the MultiP ASS C50 can scan, see ”T ypes of Documents Y ou Can Scan? ...

  • Canon MultiPASSTM C50 - page 126

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-4 Chapter 4 Sending F axes 2. Press RESOLUTION to display the resolution you want. RESOLUTION FINE PHOTO STANDARD (FINE resolution with halftone) 3. Continue with the operation you wish to complete . J If you do not proceed with any other operation, the LCD display returns to standby mode after about 5 ...

  • Canon MultiPASSTM C50 - page 127

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-5 Chapter 4 Sending F axes 3. Press ST ART/COPY , then use or to select SC AN CONTRAST . 12 SCAN CONTRAST 4. Press ST AR T/COPY . J The currently set contrast setting appears. STANDARD 5. Press or to select the scanning contrast you want. J Y ou can select ST AND ARD , D ARKER, or LIGHTER. J Y ou can c ...

  • Canon MultiPASSTM C50 - page 128

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-6 Chapter 4 Sending F axes Sending Methods Manual Sending V ia the Handset Use manual sending via the handset if you want to speak with the other party before sending a fax to them. W ith manual sending via the handset, you dial, converse normally and when they are ready to receive your fax, press the ...

  • Canon MultiPASSTM C50 - page 129

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-7 Chapter 4 Sending F axes Dialling Methods There are several ways of dialling the number of the party you want to send to: J Regular dialling Use the numeric buttons to dial the recipient’s fax number . J One-touch speed dialling Press the one-touch speed dialling button (1 to 6) under which you hav ...

  • Canon MultiPASSTM C50 - page 130

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-8 Chapter 4 Sending F axes Sending Documents This section describes how to send faxes with the MultiP ASS C50. Manual Sending via the Handset If you have the optional handset or an extension phone connected to your MultiP ASS C50, you can send faxes manually . This allows you to talk to the other party ...

  • Canon MultiPASSTM C50 - page 131

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-9 Chapter 4 Sending F axes 3. If a person answers, you can converse normally . When you are ready to send the fax, ask the person to press the start button on their fax, or set their fax machine to receive . Then press ST ART/COPY on the MultiP ASS C50 and hang up . TX TX/RX NO. 0012 J The LCD displays ...

  • Canon MultiPASSTM C50 - page 132

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-10 Chapter 4 Sending F axes Memory Sending Memory sending is a quick and easy way to send a fax. When you use memory sending, the MultiP ASS C50 scans the document into its memory as it dials the fax number. If the line is free , the MultiP ASS C50 begins sending the fax as it scans the rest of the doc ...

  • Canon MultiPASSTM C50 - page 133

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-11 Chapter 4 Sending F axes 2. Use the numeric buttons to dial the other party’s fax number . Ex: 1 2 ABC 3 DEF 4 5 JKL GHI 6 MNO 7 8 TUV PQRS 9 WXYZ 0 TEL=9p1503753798 J Use one of the dialling methods described on page 4-7. J If you must first dial a digit to get an outside line (e .g. ”9”), p ...

  • Canon MultiPASSTM C50 - page 134

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-12 Chapter 4 Sending F axes Cancelling Sending If you want to stop sending before the fax is finished, do the following. 1. Press ST OP . J If you are sending manually , the transmission is cancelled immediately . J If you are sending from memory , the following appears in the display: CANCEL? * YES # ...

  • Canon MultiPASSTM C50 - page 135

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-13 Chapter 4 Sending F axes Removing the Document From the Automatic Document Feeder (ADF) Do not try to pull the document out without opening the operation panel, or you might tear or smudge the document. 1. Open the operation panel by gently pulling it toward you. 2. Remove the jammed page by pulling ...

  • Canon MultiPASSTM C50 - page 136

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-14 Chapter 4 Sending F axes 3. When you are finished, close the operation panel by pressing it down from the centre as shown. Be sure to close the operation panel until it locks into place . Otherwise the unit will not function properly . ...

  • Canon MultiPASSTM C50 - page 137

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-15 Chapter 4 Sending F axes Redialling Manual Redialling If you are sending a fax manually (using the handset), you can redial by pressing the (REDIAL)/P A USE button. This redials the last number that was dialled with the numeric buttons. (This also starts redialling regardless of whether automatic re ...

  • Canon MultiPASSTM C50 - page 138

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-16 Chapter 4 Sending F axes During sending: TX/RX NO. 0002 (T ransaction number) 503 555 1776 (F ax number you dialled) CALLING J If you used one-touch or coded speed dialling to dial the number, the name registered under that button or code will also be displayed. If the receiving fax machine does not ...

  • Canon MultiPASSTM C50 - page 139

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-17 Chapter 4 Sending F axes 3. T o cancel the redialling, press * . The MultiP ASS C50 beeps and alternates the following displays: TX/RX CANCELLED TX/RX NO. 0002 J The unit then prints an error report (if set to print one): PRINTING REPORT If the A utomatic Report setting in the Send F ax tab of the M ...

  • Canon MultiPASSTM C50 - page 140

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-18 Chapter 4 Sending F axes Sequential Broadcasting Sending a Document to More Than One Destination The MultiP ASS C50’s sequential broadcasting feature lets you send your fax to a sequence of up to 57 fax numbers, using any combination of dialling methods as follows: J One-touch speed dialling: up t ...

  • Canon MultiPASSTM C50 - page 141

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-19 Chapter 4 Sending F axes J Manual dialling : enter the number using the numeric buttons, then press ST ART/COPY to add the number to the broadcast list. (Y ou can only enter one number manually .) 1 2 ABC 3 DEF 4 5 JKL GHI 6 MNO 7 8 TUV PQRS 9 WXYZ 0 J After entering the first one-touch speed diall ...

  • Canon MultiPASSTM C50 - page 142

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-20 Chapter 4 Sending F axes Dialling Through a Switchboard A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your MultiP ASS C50 is connected through a PBX or other telephone switching system, you have to dial the outside line access number first, and then dial the number of the ...

  • Canon MultiPASSTM C50 - page 143

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-21 Chapter 4 Sending F axes 5. Press ST ART/COPY , then press or to select the access line type for the switching system. 12 PREFIX HOOKING EARTH CONNECTION 6. Press ST AR T/COPY . If you selected PREFIX in step 5 7. Enter the outside line access number using the numeric buttons. Ex: 1 2 ABC 3 DEF 4 5 ...

  • Canon MultiPASSTM C50 - page 144

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-22 Chapter 4 Sending F axes Long Distance Dialling When you register a long distance number, you may have to insert a pause either within or after the number. F or long distance dialling, the location and length of the pause may differ depending on the telephone system. How to Enter Pauses Use this pro ...

  • Canon MultiPASSTM C50 - page 145

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-23 Chapter 4 Sending F axes Confirming a Dial T one Use this feature only when you register a number. In some areas you may have to confirm the dial tone in the middle of the facsimile number before dialling the rest of the number. This is called dial tone detection. 1. Use the numeric buttons to ent ...

  • Canon MultiPASSTM C50 - page 146

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-24 Chapter 4 Sending F axes Using T one Dialling on a Pulse Line Even if you have a pulse line , the MultiP ASS C50 enables you to use tone dialling once you have connected to the number you are calling. This lets you take advantage of many services that require tones, such as selecting options from te ...

  • Canon MultiPASSTM C50 - page 147

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-25 Chapter 4 Sending F axes If a Power Cut Occurs If power to the MultiP ASS C50 is cut off , any documents stored in its fax memory will be lost. (The MultiP ASS C50 automatically prints a list of the lost documents when power is restored.) Because of this, you should be sure to print documents stored ...

  • Canon MultiPASSTM C50 - page 148

    Canon MultiP ASS C50 Hardware Manual ENGLISH 4-26 Chapter 4 Sending F axes ...

  • Canon MultiPASSTM C50 - page 149

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-1 Chapter 5 Receiving F axes Chapter 5 Receiving Faxes This chapter describes how to use your MultiP ASS C50 to receive faxes. Different W ays to Receive a F ax .............................................................................. 5-2 Setting the Receive Mode .................................. ...

  • Canon MultiPASSTM C50 - page 150

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-2 Chapter 5 Receiving F axes Dif ferent W ays to Receive a Fax The MultiP ASS C50 provides you with four different modes for receiving faxes. T o decide which mode will best suit your requirements, consider how you want to use the MultiP ASS C50: J F ax/T el Mode: Use this mode if you will occasionally ...

  • Canon MultiPASSTM C50 - page 151

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-3 Chapter 5 Receiving F axes Setting the Receive Mode Set the MultiP ASS C50’s receive mode as follows: 1. Press RECEIVE MODE. RECEIVE MODE J The LCD display shows the current receive mode setting. FAX ONLY MODE 2. If you want to change the receive mode , press RECEIVE MODE repeatedly until the mode ...

  • Canon MultiPASSTM C50 - page 152

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-4 Chapter 5 Receiving F axes Receiving Faxes and Phone Calls Automatically: Fax/T el Mode See page 5-3 to select F ax/T el Mode . In F ax/T el Mode , the MultiP ASS C50 monitors all incoming calls to see whether the call is from another fax machine or from a telephone: T ype of call T elephone Fax Send ...

  • Canon MultiPASSTM C50 - page 153

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-5 Chapter 5 Receiving F axes J If the call is from a fax machine , the MultiP ASS C50 receives the fax automatically . J If the call is a telephone call, the MultiP ASS C50 rings to alert you to pick up the handset. If you do not pick up the handset within 22 seconds, the MultiP ASS C50 stops ringing, ...

  • Canon MultiPASSTM C50 - page 154

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-6 Chapter 5 Receiving F axes Receiving Faxes Manually: MANUAL MODE See page 5-3 to select Manual Mode . T o use this feature , the optional handset or a telephone must be plugged into the telephone jack of the MultiP ASS C50. See ”Connecting the Optional Handset, a T elephone or Answering Machine” ...

  • Canon MultiPASSTM C50 - page 155

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-7 Chapter 5 Receiving F axes If you have an answering machine connected to your MultiP ASS C50 that can carry out remote-control operations (controlling your answering machine from a remote telephone), the security code for this function may be the same as the two-digit ID code described above . If so, ...

  • Canon MultiPASSTM C50 - page 156

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-8 Chapter 5 Receiving F axes Receiving Faxes Automatically: F AX ONL Y MODE When the MultiP ASS C50 is set up for a dedicated line , set F AX ONL Y MODE to automatically receive documents whenever a call comes over the fax line . 1. Make sure the MultiP ASS C50 is set up to receive over a dedicated fax ...

  • Canon MultiPASSTM C50 - page 157

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-9 Chapter 5 Receiving F axes Using an Answering Machine: ANS. MACHINE MODE Connecting an answering machine to the MultiP ASS C50 allows you to receive faxes and phone messages while you are out of the office . In ANS . MACHINE MODE, the MultiP ASS C50 allows the answering machine to answer incoming ca ...

  • Canon MultiPASSTM C50 - page 158

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-10 Chapter 5 Receiving F axes Documents Received in Memory The MultiP ASS C50 will automatically receive incoming faxes into its memory if it encounters a problem that prevents it from printing normally . The LCD will display REC’D IN MEMOR Y and a message showing the problem. See below for correctin ...

  • Canon MultiPASSTM C50 - page 159

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-11 Chapter 5 Receiving F axes LOAD PAPER Cause: The MultiP ASS C50 ran out of paper. Action: Add paper to the sheet feeder and press the (ST OP) button. See ”Loading Print Media for A utomatic Feed” on page 2-45. CLEAR PAPER JAM Cause: A paper jam occurred. Action: Clear the jam, then press the (ST ...

  • Canon MultiPASSTM C50 - page 160

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-12 Chapter 5 Receiving F axes Printing A Received Fax When Y our Computer Is Of f T o print received faxes rather than transferring them to your PC, do not turn on your PC and follow these steps: 1. Press FUNCTION . FUNCTION FUNCTION 2. Press or to select FILE PRINT . 12 FILE PRINT 3. Press ST AR T/COP ...

  • Canon MultiPASSTM C50 - page 161

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-13 Chapter 5 Receiving F axes Receiving While Registering, Copying, or Printing Since the MultiP ASS C50 is a multitasking device , it can receive faxes and phone calls while you are entering your user information or other settings, making copies, or printing a report. If your MultiP ASS C50 is set to ...

  • Canon MultiPASSTM C50 - page 162

    Canon MultiP ASS C50 Hardware Manual ENGLISH 5-14 Chapter 5 Receiving F axes Cancelling an Incoming Fax T o cancel an incoming fax, follow this procedure: 1. Press ST OP . CANCEL? * YES #NO 2. Press * to stop receiving, or # to resume receiving a fax. ...

  • Canon MultiPASSTM C50 - page 163

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-1 Chapter 6 Scanning Documents and Making Copies Chapter 6 Scanning Documents and Making Copies This chapter describes how to load documents into the MultiP ASS C50 for faxing, copying, or scanning, and tells how to make copies. Scanning Documents ....................................................... ...

  • Canon MultiPASSTM C50 - page 164

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-2 Chapter 6 Scanning Documents and Making Copies Scanning Documents The first step in scanning a document is to load the document into the MultiP ASS C50’s A utomatic Document Feeder (ADF). Y ou can then use the MultiP ASS Desktop Manager to scan documents and save the scanned images as .TIF , .BMP ...

  • Canon MultiPASSTM C50 - page 165

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-3 Chapter 6 Scanning Documents and Making Copies When the document feed lev er is set to Manual Document Feed: Size: N Maximum: 216 mm × approx. 1m N Minimum: 80 × 45 mm Quantity: N 1 page Thickness: N 0.08-0.43 mm W eight: N 90-340 g/m 2 Problem documents J T o prevent paper jams in the A utomatic D ...

  • Canon MultiPASSTM C50 - page 166

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-4 Chapter 6 Scanning Documents and Making Copies Effective Image Size The MultiP ASS C50 does not scan the areas within the maximum margins of 4.5 mm on either side of the sheet and 4.0 mm on the top and bottom. Make sure your document’s text and graphics do not extend into these margins. A4 MAX. 4.0 ...

  • Canon MultiPASSTM C50 - page 167

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-5 Chapter 6 Scanning Documents and Making Copies Selecting Automatic/Manual Document Feed The document feed lever allows you to select whether the A utomatic Document Feeder (ADF) feeds documents automatically . If set to automatic document feed, a multipage document will automatically feed page by pag ...

  • Canon MultiPASSTM C50 - page 168

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-6 Chapter 6 Scanning Documents and Making Copies Loading Documents for Automatic Feed 1. Make sure the document feed lever is set to automatic document feed. 2. If the document has multiple pages, tap it on a flat surface to even the stack’s edges. ...

  • Canon MultiPASSTM C50 - page 169

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-7 Chapter 6 Scanning Documents and Making Copies 3. Adjust the document guides to the width of the document. A4 LTR 4. Gently insert the document face-down (top of the document towards you) into the A utomatic Document Feeder (ADF) until you hear a beep . ...

  • Canon MultiPASSTM C50 - page 170

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-8 Chapter 6 Scanning Documents and Making Copies The document is now ready for scanning. The MultiP ASS C50 automatically feeds the pages one by one from the bottom of the stack. ...

  • Canon MultiPASSTM C50 - page 171

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-9 Chapter 6 Scanning Documents and Making Copies T rouble W ith Multipage Documents If you have trouble feeding a multipage document, do the following: 1. Remove the stack and tap it on a flat surface to even the edges. 2. ”Slant” the stack so that its front edge is bevelled as shown below , then ...

  • Canon MultiPASSTM C50 - page 172

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-10 Chapter 6 Scanning Documents and Making Copies Loading Documents for Manual Feed 1. Make sure the document feed lever is set to manual document feed. When using manual feed, use a carrier sheet to avoid scratching the surface of important documents (photographs, for example). 2. Adjust the document ...

  • Canon MultiPASSTM C50 - page 173

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-11 Chapter 6 Scanning Documents and Making Copies 3. Gently insert the document face-down (top of the document towards you) into the A utomatic Document Feeder (ADF) until you hear a beep . The document is now ready for scanning. ...

  • Canon MultiPASSTM C50 - page 174

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-12 Chapter 6 Scanning Documents and Making Copies Adding Pages to the Document in the Automatic Document Feeder (ADF) When the MultiP ASS C50 is set for automatic document feed, the A utomatic Document Feeder (ADF) can hold up to 20 A4-size , 20 letter -size, or 10 legal-size pages at a time (75-90 g/m ...

  • Canon MultiPASSTM C50 - page 175

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-13 Chapter 6 Scanning Documents and Making Copies Making Copies One of the MultiP ASS C50’s convenient features is its ability to make up to 99 high-quality copies of a document. T o make copies, do the following: Be sure to adjust the document feed lever before loading your document. See page 6-5 fo ...

  • Canon MultiPASSTM C50 - page 176

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-14 Chapter 6 Scanning Documents and Making Copies J When copying in black and white: I Y ou cannot make copies in ST AND ARD resolution, but must use FINE or PHOT O resolution instead. (ST AND ARD does not appear as one of the available resolutions.) I FINE resolution works well for copying most text d ...

  • Canon MultiPASSTM C50 - page 177

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-15 Chapter 6 Scanning Documents and Making Copies 6. Press ST ART/COPY to begin copying: COPY J T o stop copying, press (ST OP) . Y ou may then need to lift the operation panel to remove the document. See ”J ams in the A utomatic Document Feeder (ADF)” on page 8-6. J If an error occurs during copyi ...

  • Canon MultiPASSTM C50 - page 178

    Canon MultiP ASS C50 Hardware Manual ENGLISH 6-16 Chapter 6 Scanning Documents and Making Copies ...

  • Canon MultiPASSTM C50 - page 179

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-1 Chapter 7 Printing From Y our PC Chapter 7 Printing From Y our PC This chapter describes how to use the MultiP ASS C50 to print from your PC. It describes how to prepare the print media, and gives some advice on printing with colour. Paper Handling .................................................... ...

  • Canon MultiPASSTM C50 - page 180

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-2 Chapter 7 Printing From Y our PC Paper Handling This section describes how to prepare the print media for use in your MultiP ASS C50. Selecting Paper T ypes One of the most important things you can do to achieve the best possible print quality is to select the best medium for your particular print re ...

  • Canon MultiPASSTM C50 - page 181

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-3 Chapter 7 Printing From Y our PC F ollow these steps to stack envelopes in the sheet feeder. 1. Arrange the stack of envelopes on a firm, clean surface and press down firmly on the envelopes’ edges to make the folds crisp . J Press all the way around the envelopes to remove any curls and expel ai ...

  • Canon MultiPASSTM C50 - page 182

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-4 Chapter 7 Printing From Y our PC 3. Make sure the flaps of the envelopes are flat and not curled. FLAP 4. Open the printer cover by grasping the document guides and lifting to make sure the paper thickness lever is set properly . J F or more details, see ”Adjusting the Paper Thickness Lever” on ...

  • Canon MultiPASSTM C50 - page 183

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-5 Chapter 7 Printing From Y our PC 6. Slide the stack of envelopes into the sheet feeder until it stops. J Align the paper guide with the left edge of the stack. CANON INC. TAMAGAWA PLANT 3-16-1, SHIMONOGE, TAKATUKU, KAWASAKI-SHI, KANAGAWA 213, JAPAN PHONE:(044)811-2111 PAR AVION The MultiP ASS C50 is ...

  • Canon MultiPASSTM C50 - page 184

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-6 Chapter 7 Printing From Y our PC Some Advice for Colour Printing Y our Canon MultiP ASS C50 is a powerful colour printer. If this is the first time you have used a colour printer, read this section for some tips on printing with colour effectively . Colour lets you strengthen the visual impact of re ...

  • Canon MultiPASSTM C50 - page 185

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-7 Chapter 7 Printing From Y our PC Y our application may also offer a number of colour -control functions, such as dithering, intensity , or hue: J Dithering creates colours with patterns of alternating dots. F or example, an alternating red and white dither pattern can create pink. J Intensity (satura ...

  • Canon MultiPASSTM C50 - page 186

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-8 Chapter 7 Printing From Y our PC Improving Print Speed The MultiP ASS C50 can produce a full spectrum of up to 16.7 million colours. When printing with black ink only , the driver only has to process information for one colour. When printing in colour , however, the MultiP ASS C50 has to process sign ...

  • Canon MultiPASSTM C50 - page 187

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-9 Chapter 7 Printing From Y our PC Controlling Printing Costs Printing in colour costs more than printing in black. T o keep your colour printing costs down, follow these guidelines: J Use Draft mode with the BC-21/21e Colour BJ cartridge or the BC-22/22e Photo Colour BJ cartridge to print drafts. Or u ...

  • Canon MultiPASSTM C50 - page 188

    Canon MultiP ASS C50 Hardware Manual ENGLISH 7-10 Chapter 7 Printing From Y our PC ...

  • Canon MultiPASSTM C50 - page 189

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-1 Chapter 8 T roubleshooting Chapter 8 T roubleshooting If Y ou Cannot Solve the Problem ............................................................................ 8-3 Problems Index ........................................................................................................... 8-4 Paper ...

  • Canon MultiPASSTM C50 - page 190

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-2 Chapter 8 T roubleshooting If your MultiP ASS C50 is not operating properly , use the information and suggestions in this chapter to try to solve the problem. In addition, while some problems will have a single cause , others will have a combination of causes. In the latter cases, you may need to use ...

  • Canon MultiPASSTM C50 - page 191

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-3 Chapter 8 T roubleshooting If Y ou Cannot Solve the Problem If you have a problem with your MultiP ASS C50 and cannot solve it using the information in this chapter, contact your local authorised Canon dealer or the Canon help line . Attempting to repair the MultiP ASS C50 yourself may void the limit ...

  • Canon MultiPASSTM C50 - page 192

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-4 Chapter 8 T roubleshooting Problems Index Problem See page Problems Feeding Paper Into the MultiP ASS C50 Sheet Feeder Paper does not feed into the MultiP ASS C50 sheet feeder ............ 8-9 Printing is skewed ................................................................................ 8-9 Seve ...

  • Canon MultiPASSTM C50 - page 193

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-5 Chapter 8 T roubleshooting Problem See page Printing Problems The ALARM light comes on and the MultiP ASS C50 beeps while printing .................................................................................. 8-19 Nothing prints ................................................................... ...

  • Canon MultiPASSTM C50 - page 194

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-6 Chapter 8 T roubleshooting Paper Jams On occasion, the document feeding into the MultiP ASS C50’s A utomatic Document Feeder (ADF) or the paper in its sheet feeder may misfeed or jam. If this happens, you can usually fix the problem using one of the following procedures. Y ou do not need to unplug ...

  • Canon MultiPASSTM C50 - page 195

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-7 Chapter 8 T roubleshooting 3. Remove the jammed page by pulling it in either direction. If the paper does not pull out easily , do not force it. Contact your local authorised Canon dealer or the Canon help line . 4. Gently push the operation panel shut until it clicks. 5. Press ST OP to clear the err ...

  • Canon MultiPASSTM C50 - page 196

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-8 Chapter 8 T roubleshooting Jams in the Sheet Feeder Use this procedure if the recording paper jams or misfeeds in the sheet feeder. If this happens, the message CLEAR P APER J AM appears in the display . 1. Gently pull any jammed paper out of the unit as shown. 2. Remove the paper stack from the shee ...

  • Canon MultiPASSTM C50 - page 197

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-9 Chapter 8 T roubleshooting Problems Feeding Paper into the Sheet Feeder If you are having problems feeding paper or other media into the MultiP ASS C50’s sheet feeder , check the following table . Whenever you correct one of these problems, be sure to remove the paper from the sheet feeder and load ...

  • Canon MultiPASSTM C50 - page 198

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-10 Chapter 8 T roubleshooting Problem P ossible cause Solution Several sheets load into the MultiP ASS C50 at once Paper may not be loaded in the sheet feeder correctly . Make sure paper is inserted correctly in the sheet feeder. See page 2-45. Sheets of paper may be sticking together. Make sure the pa ...

  • Canon MultiPASSTM C50 - page 199

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-11 Chapter 8 T roubleshooting Problem P ossible cause Solution Envelopes will not feed The envelopes may not be loaded correctly . Make sure the envelopes are loaded properly . See page 7-2. Make sure there are no more than 10 envelopes in the sheet feeder. The correct envelope size may not be selected ...

  • Canon MultiPASSTM C50 - page 200

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-12 Chapter 8 T roubleshooting Faxing Problems Use the following tables to solve problems that can occur when sending and receiving faxes with the MultiP ASS C50. Sending Faxes Problem P ossible cause Solution Y ou cannot send a fax The MultiP ASS C50 may have over -heated and shut itself down. If you s ...

  • Canon MultiPASSTM C50 - page 201

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-13 Chapter 8 T roubleshooting Problem P ossible cause Solution Images on faxes received from the MultiP ASS C50 are spotted or dirty The receiving fax machine may not be working properly . Check the MultiP ASS C50 by making a copy . If the copy is clear, the problem may be in the receiving fax machine ...

  • Canon MultiPASSTM C50 - page 202

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-14 Chapter 8 T roubleshooting Receiving Faxes Problem P ossible cause Solution The MultiP ASS C50 cannot receive faxes automatically The MultiP ASS C50 may not be set to receive faxes automatically . F or the MultiP ASS C50 to receive faxes automatically , it must be in F axOnly , AnsMode , or F axT el ...

  • Canon MultiPASSTM C50 - page 203

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-15 Chapter 8 T roubleshooting Problem P ossible cause Solution The MultiP ASS C50 will not switch between telephone and fax calls automatically The MultiP ASS C50 may not be in F ax/T el Mode . F or the MultiP ASS C50 to switch automatically between telephone and fax calls, it must be in F ax/ T el mod ...

  • Canon MultiPASSTM C50 - page 204

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-16 Chapter 8 T roubleshooting Problem P ossible cause Solution The print quality is poor Y ou may not be using the correct paper. Make sure the paper in the sheet feeder meets the specifications given in Appendix A. The sending fax machine may not be operating properly . Make a copy with your MultiP A ...

  • Canon MultiPASSTM C50 - page 205

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-17 Chapter 8 T roubleshooting Problem P ossible cause Solution Received faxes are blotched or uneven The telephone lines may be in poor condition, or you may have a bad connection. Use ECM receiving to try eliminate such problems. However, if the telephone lines are in poor condition, you may need to h ...

  • Canon MultiPASSTM C50 - page 206

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-18 Chapter 8 T roubleshooting Copying Problems Problem P ossible cause Solution The MultiP ASS C50 will not make a copy The MultiP ASS C50 may have a BC-21/21e Colour BJ cartridge installed, and its black ink tank may be empty . Replace the empty ink tank. See page 9-17. The MultiP ASS C50 may have a B ...

  • Canon MultiPASSTM C50 - page 207

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-19 Chapter 8 T roubleshooting Printing Problems If you are having problems printing with the MultiP ASS C50, check the problems and solutions listed in the following table . Problem P ossible cause Solution The ALARM light comes on and the MultiP ASS C50 beeps while printing The MultiP ASS C50 may have ...

  • Canon MultiPASSTM C50 - page 208

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-20 Chapter 8 T roubleshooting Problem P ossible cause Solution Nothing prints The power cord may not be plugged in securely . Make sure the power cord is plugged securely into the unit and into a wall outlet. The interface cable may not be securely connected to the MultiP ASS C50 and the computer. Chec ...

  • Canon MultiPASSTM C50 - page 209

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-21 Chapter 8 T roubleshooting Problem P ossible cause Solution The BJ cartridge moves, but no print appears on the paper The BJ cartridge or an ink tank may not be installed properly . Make sure the BJ cartridge and any ink tanks are properly installed. See page 2-31. The BJ cartridge print head may ne ...

  • Canon MultiPASSTM C50 - page 210

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-22 Chapter 8 T roubleshooting Problem P ossible cause Solution The printed output is not what you expected There may be a communication problem between the MultiP ASS C50 and your PC. Make sure the PC and the application are configured correctly for communicating with the MultiP ASS C50. See the Multi ...

  • Canon MultiPASSTM C50 - page 211

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-23 Chapter 8 T roubleshooting Problem P ossible cause Solution Printout does not match paper size Paper may not be loaded and aligned correctly in the sheet feeder. Make sure the paper is loaded and aligned correctly . See page 2-45. The application’s page size and margin settings may be incorrect. M ...

  • Canon MultiPASSTM C50 - page 212

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-24 Chapter 8 T roubleshooting Print Quality Problems If your print quality is not what you expect it to be , check the problems and solutions below . Problem P ossible cause Solution Print is not clear The medium you are using may not be supported by the MultiP ASS C50. Use only print media specified ...

  • Canon MultiPASSTM C50 - page 213

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-25 Chapter 8 T roubleshooting Problem P ossible cause Solution Output is faint Y ou may be using Draft print quality or Fine mode . T ry using Standard mode . See the MultiP ASS Desktop Manager User ’ s Guide . Printing takes too much time Y ou may be using Fine mode . T ry using Standard mode. See t ...

  • Canon MultiPASSTM C50 - page 214

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-26 Chapter 8 T roubleshooting Colour Printing and Copying Problems Use the following to correct problems you may have while using the MultiP ASS C50 to print in colour. Problem P ossible cause Solution Colours are missing, and the output contains only black ink The MultiP ASS C50 Printer Driver may not ...

  • Canon MultiPASSTM C50 - page 215

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-27 Chapter 8 T roubleshooting Problem P ossible cause Solution Colours generally print incorrectly The MultiP ASS C50 Printer Driver may not be selected. Make sure you are using the MultiP ASS C50 Printer Driver. See the MultiP ASS Desktop Manager User ’ s Guide . The printer driver may not be select ...

  • Canon MultiPASSTM C50 - page 216

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-28 Chapter 8 T roubleshooting Problem P ossible cause Solution Hue changes The print head nozzles may be clogged with dust. Clean the print head. See page 9-9. An ink tank may be empty . Replace empty ink tanks as needed. See page 9-17. Printed blue looks purple Blue prints as purple because of the dif ...

  • Canon MultiPASSTM C50 - page 217

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-29 Chapter 8 T roubleshooting General Problems Problem P ossible cause Solution The MultiP ASS C50 has no power The power cord may not be securely plugged into the unit. Make sure the power cord is plugged securely into the unit and into a wall outlet. If the power cord is connected to a power strip , ...

  • Canon MultiPASSTM C50 - page 218

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-30 Chapter 8 T roubleshooting Error Codes, Messages, and Solutions This table lists the error messages that appear in the MultiP ASS C50’s LCD display and the corresponding error codes that appear in activity reports, and tells what to do for each. Message Error Code Cause Action A UTO REDIAL – The ...

  • Canon MultiPASSTM C50 - page 219

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-31 Chapter 8 T roubleshooting Message Error Code Cause Action CHANGE CAR TRIDGE #052 The BJ cartridge is empty or its ink has dried out. Make a copy or print a document. If the printout is light or blank, replace the BJ cartridge . Documents received in memory will then be printed automatically . The M ...

  • Canon MultiPASSTM C50 - page 220

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-32 Chapter 8 T roubleshooting Message Error Code Cause Action DOC TOO LONG #003 It took more than 32 minutes to send or copy a document. Divide the document and send or copy each part separately . It took more than 32 minutes to receive a document. Contact the sender, and have them divide the document ...

  • Canon MultiPASSTM C50 - page 221

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-33 Chapter 8 T roubleshooting Message Error Code Cause Action MEMOR Y FULL #037 The MultiP ASS C50’ s memory is full because it has received too many documents, or a very long or detailed document. Print out any documents that are stored in memory . Then start the operation again. See page 5-12. The ...

  • Canon MultiPASSTM C50 - page 222

    Canon MultiP ASS C50 Hardware Manual ENGLISH 8-34 Chapter 8 T roubleshooting Message Error Code Cause Action REC’D IN MEMOR Y – The paper or ink ran out, or a paper jam occurred, so the MultiP ASS C50 received the document in memory . Add paper to the sheet feeder, change the BJ cartridge , or clear the paper jam, as needed. Print the document ...

  • Canon MultiPASSTM C50 - page 223

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-1 Chapter 9 Maintaining Y our MultiP ASS C50 Chapter 9 Maintaining Y our MultiP ASS C50 Y our MultiP ASS C50 requires no maintenance other than periodic cleaning, and replacing the BJ ink cartridges or tanks as needed. Cleaning the MultiP ASS C50 ........................................................ ...

  • Canon MultiPASSTM C50 - page 224

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-2 Chapter 9 Maintaining Y our MultiP ASS C50 Cleaning the MultiP ASS C50 Clean your MultiP ASS C50 regularly to keep it in good operating condition. F ollow these precautions whenever you clean the MultiP ASS C50: J When the power cord is disconnected, the image memory is completely erased. Therefore , ...

  • Canon MultiPASSTM C50 - page 225

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-3 Chapter 9 Maintaining Y our MultiP ASS C50 J Never use volatile liquids such as thinners, benzene , acetone , or any other chemical cleaner to clean the interior of the MultiP ASS C50, as they can damage its components. J A void touching the print head or ribbon cable inside the MultiP ASS C50. DO NO ...

  • Canon MultiPASSTM C50 - page 226

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-4 Chapter 9 Maintaining Y our MultiP ASS C50 Cleaning the Scanner Components Periodically check and clean the scanning components as explained here . When you unplug the unit, any faxes stored in memory will be erased. Be sure to print out any documents received in memory before unplugging the unit. Se ...

  • Canon MultiPASSTM C50 - page 227

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-5 Chapter 9 Maintaining Y our MultiP ASS C50 3. Clean the components as described below . SEP ARA TION GUIDE SCANNING GLASS SEP ARA TION ROLLER Separation roller W ipe with a soft, dry clean cloth to clean the rollers. Separation guide W ipe with a dry , soft cloth. White sheet and scanning glass Use a ...

  • Canon MultiPASSTM C50 - page 228

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-6 Chapter 9 Maintaining Y our MultiP ASS C50 4. Clean the shaded areas of the operation panel and the unit. J Dirt and dust particles that collect on the underside of the operation panel also affect the quality of the documents you copy or send. 5. Use a soft, dry clean cloth to wipe up paper dust arou ...

  • Canon MultiPASSTM C50 - page 229

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-7 Chapter 9 Maintaining Y our MultiP ASS C50 6. When you are finished, close the operation panel by pressing it down from the centre as shown. Be sure to close the operation panel until it locks into place , or the unit will not function properly . 7. Plug the unit back in. ...

  • Canon MultiPASSTM C50 - page 230

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-8 Chapter 9 Maintaining Y our MultiP ASS C50 Maintaining BJ Cartridges One of the most important elements in maintaining your MultiP ASS C50’s excellent print quality is to clean the BJ cartridge’s print head regularly , and to replace the BJ ink cartridges and tanks promptly when needed. Printing ...

  • Canon MultiPASSTM C50 - page 231

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-9 Chapter 9 Maintaining Y our MultiP ASS C50 Cleaning and T esting the BJ Cartridge Print Head The print head in the BJ print cartridge contains nozzles through which ink is propelled onto the paper. T o maintain the best possible print quality , these nozzles need to be cleaned from time to time . Y o ...

  • Canon MultiPASSTM C50 - page 232

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-10 Chapter 9 Maintaining Y our MultiP ASS C50 When to Replace the BJ Cartridge How frequently you need to replace your MultiP ASS C50’s BJ cartridge or one of its ink tanks depends on how you use your MultiP ASS C50. If you print a good deal of graphics, halftones, or greyscales, you will need to rep ...

  • Canon MultiPASSTM C50 - page 233

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-11 Chapter 9 Maintaining Y our MultiP ASS C50 3. If the document is light, blank, or shows gaps, clean the printing area. If this doesn’t work, replace the cartridge . Although Canon makes numerous BJ cartridges, the BC-21/21e Colour BJ cartridge , the BC-20 Black BJ cartridge , the BC-22/22e Colour ...

  • Canon MultiPASSTM C50 - page 234

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-12 Chapter 9 Maintaining Y our MultiP ASS C50 Replacing the BJ Cartridge When replacing BJ cartridges, always follow the precautions and cartridge selection guidelines given in ”Guidelines for Using and Maintaining BJ Cartridges” on page 2-27. Replace the BJ print cartridge as follows. 1. Make sure ...

  • Canon MultiPASSTM C50 - page 235

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-13 Chapter 9 Maintaining Y our MultiP ASS C50 Hold the BJ cartridge by its sides only . Do not touch the print head, the sharp edges around the print head, the silver plate on the bottom of the cartridge , or the silver metal or circuit area on its side . PRINT HEAD 4. Raise the green cartridge lock le ...

  • Canon MultiPASSTM C50 - page 236

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-14 Chapter 9 Maintaining Y our MultiP ASS C50 6. Peel the foil off of the new BJ cartridge’s protective packaging, and remove the cartridge . 7. Pull the orange cap off of the cartridge’s print head, then remove the orange tape . Discard the cap and tape immediately . Never attempt to re-attach the ...

  • Canon MultiPASSTM C50 - page 237

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-15 Chapter 9 Maintaining Y our MultiP ASS C50 8. Hold the cartridge so that its label faces outward, tilt it slightly forward and to the right. Slide it into the cartridge holder. Ink Cartridge BCl-21 Color Made in Japan Ink Cartridge BCl-21 Black Made in Japan DO NOT TOUCH THE GUIDE RAIL DO NOT TOUCH ...

  • Canon MultiPASSTM C50 - page 238

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-16 Chapter 9 Maintaining Y our MultiP ASS C50 Do not unplug the MultiP ASS C50 unless the cartridge holder is in its home position on the right. If you unplug the unit while it is printing, or move the ink cartridge from the home position, the cartridge will not be capped and can dry out. ...

  • Canon MultiPASSTM C50 - page 239

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-17 Chapter 9 Maintaining Y our MultiP ASS C50 Replacing an Ink T ank in the BC-21/21e Colour BJ Cartridge If you are using the BC-21/21e Colour BJ cartridge and perform a print operation correctly but the output is blank, one of the BC-21/21e’s ink tanks may be out of ink. If this happens, clean the ...

  • Canon MultiPASSTM C50 - page 240

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-18 Chapter 9 Maintaining Y our MultiP ASS C50 The colour ink tank is on the left, and the black ink tank is on the right. Ink Cartridge BCl-21 Color Made in Japan Ink Cartridge BCl-21 Black Made in Japan Color BJ Cartridge BC-21 Made in Japan Color Slot Black Slot BCI-21 COLOUR INK T ANK BCI-21 BLACK I ...

  • Canon MultiPASSTM C50 - page 241

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-19 Chapter 9 Maintaining Y our MultiP ASS C50 6. T ake the new ink tank out of its bag and remove its orange cap . Be careful not to touch the bottom of the ink tank, as you may get ink on your hands. DO NOT TOUCH ...

  • Canon MultiPASSTM C50 - page 242

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-20 Chapter 9 Maintaining Y our MultiP ASS C50 7. Slide the new ink tank into the empty slot. Ink Cartridge BCl-21 Black Made in Japan Ink Cartridge BCl-21 Color Made in Japan Ink Cartridge BCl-21 Color Made in Japan Ink Cartridge BCl-21 Black Made in Japan DO NOT TOUCH THE GUIDE RAIL DO NOT TOUCH THE R ...

  • Canon MultiPASSTM C50 - page 243

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-21 Chapter 9 Maintaining Y our MultiP ASS C50 T ransporting the MultiP ASS C50 Whenever you plan to transport the MultiP ASS C50, you need to prepare it so it will not be damaged during the move . 1. Do NOT remove the BJ cartridge from the unit. 2. Make sure the cartridge holder is in its home position ...

  • Canon MultiPASSTM C50 - page 244

    Canon MultiP ASS C50 Hardware Manual ENGLISH 9-22 Chapter 9 Maintaining Y our MultiP ASS C50 ...

  • Canon MultiPASSTM C50 - page 245

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-1 Appendix A Specifications Appendix A Specifications The specifications of the MultiP ASS C50 are listed in this section. General ....................................................................................................................... A-2 Plain Paper F ax ............................ ...

  • Canon MultiPASSTM C50 - page 246

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-2 Appendix A Specifications General Applicable line: Public Switched T elephone Network Compatibility: G3 Data compression system: MH, MR, MMR (ECM-MMR) Modem type: F AX modem Modem speed: 14400, 9600, 7200, 4800, 2400 bps (automatic fallback) T ransmission speed: Approximately 6 seconds/page* (transm ...

  • Canon MultiPASSTM C50 - page 247

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-3 Appendix A Specifications Environmental r equirements: N T emperature: 10 ! -32.5 ! C N Humidity: 10%-90% RH Applicable standards: N Electrical safety: GS , FIMK O N Radiation: CISPR Pub22 ClassB N PTT N Energy Star compliant Interface: IEEE 1284 compatible parallel interface Plain Paper Fax T ransm ...

  • Canon MultiPASSTM C50 - page 248

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-4 Appendix A Specifications Dialling: N A utomatic dialling: – One-touch speed dialling (6 locations) – Coded speed dialling (50 locations) – Group dialling (55 locations) N Regular dialling (with numeric buttons) N A utomatic redialling (including error redialling) N Manual redialling N Pause b ...

  • Canon MultiPASSTM C50 - page 249

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-5 Appendix A Specifications Reduction sizes: 70%, 80%, 90% Copy speed: Black and white copy: N Initial copy: 45 seconds N Subsequent copies: 20 seconds Colour copy: N COLOR FINE mode , A4 size: 9 minutes, 44 seconds N COLOR DRAFT mode , A4 size: 6 minutes, 3 seconds N COLOR SN APSHOT mode , 102 × 152 ...

  • Canon MultiPASSTM C50 - page 250

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-6 Appendix A Specifications Printer Printing method: Bubble J et ink on-demand Printing resolution: 720 × 360 dpi P aper handling: A utomatic feed/Manual feed Sheet feeder capacity: N 100 sheets of A4/letter/legal (75 g/m 2 ) N 50 sheets of transparencies N 10 sheets of back print film N 10 envelope ...

  • Canon MultiPASSTM C50 - page 251

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-7 Appendix A Specifications Printable Area: Papers The shaded area in the following figure shows the printable area for papers. a b d c e b Printable area: A4 size Letter size Legal size a 210 mm a 8.5 ) a 8.5 ) b 3.4 mm b 0.25 ) b 0.25 ) c 297 mm c 11.0 ) c 14.0 ) d 3.0 mm d 0.12 ) d 0.12 ) e 7.0 mm ...

  • Canon MultiPASSTM C50 - page 252

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-8 Appendix A Specifications Printable Area: Envelopes The shaded portion in the following figure shows the printable area for envelopes. e f d a bc Printable area: European DL U .S. Commercial No. 10 a 220 mm a 9.5 ) b 6.4 mm b 0.25 ) c 10.4 mm c 1.2 ) d 110 mm d 4.1 ) e 3.0 mm e 0.12 ) f 7.0 mm f 0. ...

  • Canon MultiPASSTM C50 - page 253

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-9 Appendix A Specifications BC-20 Black BJ cartridge N Print head: 128 nozzles N Ink colour: Black N Contents: Isopropyl alcohol 67-63-0, glycerine 56-81-5, ethylene glycol 107-21-1 N Cartridge life/cartridge yield: Approx. 900 pages at 5% coverage BC-21/21e Colour BJ cartridge N Print head: N 64 nozz ...

  • Canon MultiPASSTM C50 - page 254

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-10 Appendix A Specifications Scanner Scanning method: Solid-state electronic scanning by contact colour image sensor Scanning image processing: N Ultra-High-Quality Image Processing System (UHQ TM ) N Halftones: 256 levels of grey N Colour: 16.7 million colours Scanning resolution: N Standard 300 dpi ...

  • Canon MultiPASSTM C50 - page 255

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-11 Appendix A Specifications Document Sizes The following illustrations show the largest and smallest documents you can feed into the MultiP ASS C50. When the document feed lev er is set to A utomatic document feed Maximum Document Size Minimum Document Size 216 mm 210 mm 148 mm UP TO A MAXIMUM OF 32 ...

  • Canon MultiPASSTM C50 - page 256

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-12 Appendix A Specifications The figure below shows how much of an A4-size document the MultiP ASS C50 scans when faxing or scanning. A4 Max. 4.0 mm Max. 4.0 mm Max. 4.5 mm Max. 4.5 mm A margin of up to 4.5 mm on either side of the sheet and up to 4.0 mm on the top and bottom are outside the MultiP A ...

  • Canon MultiPASSTM C50 - page 257

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-13 Appendix A Specifications PC Interface T ype: Bi-directional parallel Mode: Compatible , Nibble , ECP MultiP ASS Desktop Manager for Windows H System requirements: N IBM compatible PC, 486 or faster processor (i486 DX or faster recommended) N 8 MB of RAM (16 MB recommended) N 25 MB of free hard dis ...

  • Canon MultiPASSTM C50 - page 258

    Canon MultiP ASS C50 Hardware Manual ENGLISH A-14 Appendix A Specifications ...

  • Canon MultiPASSTM C50 - page 259

    Canon MultiP ASS C50 Hardware Manual ENGLISH B-1 Appendix B Options Appendix B Options This section describes the optional equipment available for use with the MultiP ASS C50. Optional Handset ....................................................................................................... B-2 Package Contents ................................ ...

  • Canon MultiPASSTM C50 - page 260

    Canon MultiP ASS C50 Hardware Manual ENGLISH B-2 Appendix B Options Optional Handset The optional handset available for connection to your MultiP ASS C50. Contact your Canon dealer for more information. Package Contents Make sure you have the following items. If anything is damaged or missing, notify your Canon dealer immediately . HANDSET SCREWS W ...

  • Canon MultiPASSTM C50 - page 261

    Canon MultiP ASS C50 Hardware Manual ENGLISH B-3 Appendix B Options Attaching the Handset to Y our Unit T o attach the handset to your unit, follow these steps: 1. Use a screwdriver to remove the two covers on the left side of the unit. 2. Remove the screws from the plugs and insert the plugs in the holes on the handset cradle . ...

  • Canon MultiPASSTM C50 - page 262

    Canon MultiP ASS C50 Hardware Manual ENGLISH B-4 Appendix B Options 3. Insert the plugs with the handset cradle in the holes on the unit. If you have difficulty inserting the plugs, turn the unit so that the left side is facing you and the right side is placed against a wall. This will allow you to insert the plugs without the unit moving. 4. Inse ...

  • Canon MultiPASSTM C50 - page 263

    Canon MultiP ASS C50 Hardware Manual ENGLISH B-5 Appendix B Options 5. Connect the handset cord to the input jack marked on the left side of the unit. When carrying the unit, do not lift it by the handset cradle as it may break. If you need to remove the handset cradle after it is installed, use a small phillips screwdriver to remove the two screws ...

  • Canon MultiPASSTM C50 - page 264

    Canon MultiP ASS C50 Hardware Manual ENGLISH B-6 Appendix B Options Control Panel and Functions This section describes the parts of your handset and its functions. HOOK BUTTON A R BUTTON B RINGER SWITCH C TONE/PULSE SWITCH RECEIVER D NUMERIC BUTTONS TRANSMITTER TELEPHONE LINE CABLE F or details on the functions see the following pages. ...

  • Canon MultiPASSTM C50 - page 265

    Canon MultiP ASS C50 Hardware Manual ENGLISH B-7 Appendix B Options A R Button This button can be used when the handset is connected to a P ABX or a System ’X’ exchange . The R button is used to obtain a second line to the P ABX while holding the original line (for example , when transferring a call from one extension to another or when using s ...

  • Canon MultiPASSTM C50 - page 266

    Canon MultiP ASS C50 Hardware Manual ENGLISH B-8 Appendix B Options Maintaining Y our Handset F ollow these guidelines to maintain your handset in top working condition. J Do not leave your handset exposed to direct sunlight. J Do not install your handset in hot or humid conditions. J Do not spray aerosol polishes on your handset as they may enter ...

  • Canon MultiPASSTM C50 - page 267

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-1 Glossary Glossary A AC Alternating current. The type of electrical current available from a wall outlet. Activity report A journal of the MultiP ASS C50’s fax transactions, both sent and received. Address Book The MultiP ASS Desktop Manager for W indows provides you with an electronic Address Book ...

  • Canon MultiPASSTM C50 - page 268

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-2 Glossary A utomatic Document Feeder (ADF) The device included in the MultiP ASS C50 that automatically feeds the document being faxed, copied, or scanned into the MultiP ASS C50. A utomatic image reduction The MultiP ASS C50 can print the date , time , company name , and a fax number at the top of th ...

  • Canon MultiPASSTM C50 - page 269

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-3 Glossary Bubble J et (BJ) printing An ink-jet type printer that heats the ink to a boiling point in a nozzle to form a bubble . When the bubble expands, there is no room left in the nozzle for the ink and the ink is projected onto paper. C Centronics An interface standard for parallel data transmissi ...

  • Canon MultiPASSTM C50 - page 270

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-4 Glossary Composite black The black colour formed by mixing cyan, magenta, and yellow ink so that they appear almost black on a printout. Control code Special data that invokes nonprinting functions of the printer, such as line feed or carriage return. In the ASCII chart, control codes are represented ...

  • Canon MultiPASSTM C50 - page 271

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-5 Glossary Dithering A method by which colour dots are combined on a page to produce a wide spectrum of colours. Document The sheet of paper containing the data that you send to, or receive from a unit. dpi Dots per inch. A unit of measurement for indicating a printer’ s resolution. Y our MultiP ASS ...

  • Canon MultiPASSTM C50 - page 272

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-6 Glossary F AX/TEL switching This option allows you to set the MultiP ASS C50 to automatically detect whether a call is from a fax or telephone . If the call is from another fax, the transmission is automatically received. If the call is from a telephone , the MultiP ASS C50 rings to let you know , so ...

  • Canon MultiPASSTM C50 - page 273

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-7 Glossary H Halftone Using this method, the MultiP ASS C50 produces shades of grey or of colours by mapping dots to be printed. F or colour printing, different coloured dots of ink are placed closely together to create illusions of other colours. Hue A colour in the colour spectrum. Examples are red, ...

  • Canon MultiPASSTM C50 - page 274

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-8 Glossary Interface cable The cable used to create the interface between a printer and a computer. Interface port The MultiP ASS C50 comes with one Centronics, 8-bit, bi-directional parallel interface port, located on the back of the unit. Y ou attach the cable that connects your computer and MultiP A ...

  • Canon MultiPASSTM C50 - page 275

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-9 Glossary Memory broadcast Allows you to send a scanned fax to as many as 57 locations at once , using a combination of one-touch speed dialling, coded speed dialling, or manual dialling. Memory sending Scans a document into memory before the MultiP ASS C50 dials the numbers and sends it. This method ...

  • Canon MultiPASSTM C50 - page 276

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-10 Glossary O Off-line The printer’s communication status in which you cannot transfer data from your computer to the printer. On-line The printer’s communication status in which it is being controlled by your computer and is ready to receive data. One-touch speed dialling An automatic dialling met ...

  • Canon MultiPASSTM C50 - page 277

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-11 Glossary Photo The document setting you use for sending or copying documents with intermediate tones, such as photographs. Platen The printer component that holds the paper in position during ink transfer. P oint size Character height is defined in points; one point is 1/72 inch. F or instance, thi ...

  • Canon MultiPASSTM C50 - page 278

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-12 Glossary Q Quick-on-line sending Quick-on-line sending is the easiest and quickest way to send a document. After a document is set in the A utomatic Document Feeder (ADF), the MultiP ASS C50 begins to scan the entire document into the memory . As the first page of a multiple page document is being ...

  • Canon MultiPASSTM C50 - page 279

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-13 Glossary Redialling-automatic When the fax you dial does not answer or a sending error occurs, the MultiP ASS C50 waits for a specified interval and then redials the same fax number. Y ou can adjust the number of redials and the length of time between redialling. Redialling-manual When you use the ...

  • Canon MultiPASSTM C50 - page 280

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-14 Glossary Resolution The density of dots for any given output device . Expressed in terms of dots per inch (dpi). Low resolution causes font characters and graphics to have a jagged appearance . Higher resolution means smoother curves and angles as well as a better match to traditional typeface desig ...

  • Canon MultiPASSTM C50 - page 281

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-15 Glossary Sender ID Information printed at the top of a fax (also called TTI or T ransmit T erminal ID): J Date and time the fax was sent J Sender’s fax/phone number J Sender’s name J Y our name or company name J Page number Sending A fax document that has been scanned by a facsimile machine and ...

  • Canon MultiPASSTM C50 - page 282

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-16 Glossary T T imed sending See Delayed sending . T ONE A button that allows you to temporarily switch to touch-tone from pulse dialling. In some countries, on-line data services may require that you use tone dialling. T one/pulse setting The ability to set the MultiP ASS C50 to match the telephone di ...

  • Canon MultiPASSTM C50 - page 283

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-17 Glossary TX See Sending . T ypeface The printed design of characters. F or instance, Courier , Script, and Roman typefaces all print characters of different designs. T ypestyle Refers to how the typeface appears: slanted (italic) or upright. U UHQ TM (Ultra High Quality) An exclusive Canon digital i ...

  • Canon MultiPASSTM C50 - page 284

    Canon MultiP ASS C50 Hardware Manual ENGLISH G-18 Glossary ...

  • Canon MultiPASSTM C50 - page 285

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-1 Index Index 1-TOUCH SPEED DIAL setting 2-67, 2-68, 3-3 A Access type registering 4-20, 4-21 Accessing unit settings 2-71 to 2-73 Adding pages to document 6-12 ADF See A utomatic Document Feeder Adjusting paper thickness lever 2-35, 2-42, 2-43 ALARM lamp 2-24 Alarm setting 2-62 ALARM V OLUME setting 2 ...

  • Canon MultiPASSTM C50 - page 286

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-2 Index B Back Print Film BF-102 2-38 BC-20 Black BJ cartridge 2-6, 2-29 BC-21/21e Colour BJ cartridge 2-6, 2-29 BC-22/22e Photo Colour BJ cartridge 2-30 BC-29F Fluorescent BJ cartridge 2-30 BCI-21 Black ink tank 2-29 BCI-21 Colour ink tank 2-29 BF-102 See Bac k Print Film BF-102 Bi-directional paralle ...

  • Canon MultiPASSTM C50 - page 287

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-3 Index CAR TRIDGE button 2-25 CAR TRIDGE J AMMED message 8-30 CF-102 See T ransparencies CF-102 CHANGE CAR TRIDGE message 5-10, 8-31, 9-10 CHECK DOCUMENT message 8-31 CHECK P APER SIZE message 8-31 CHECK PRINTER message 8-31 Cleaning exterior 9-2 interior 9-2, 9-3 print head 9-9 scanner components 9-4 ...

  • Canon MultiPASSTM C50 - page 288

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-4 Index D D .T . button 2-26 using 4-23 D A TE & TIME setting 2-58, 2-62, 2-68 Date F ormat setting 2-62 Default Action if No Answer to T elephone setting 2-66 Desktop Manager See MultiP ASS Desktop Manager Dial tone confirming 4-23 Dialling automatic 3-2, 4-7 coded speed 3-2, 3-10 to 3-16, 4-7 gr ...

  • Canon MultiPASSTM C50 - page 289

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-5 Index F F abric Sheets FS-101 2-39 printing 2-52 Fa x cancelling 4-12 cancelling incoming 5-14 features 1-4 printing 5-12 problems 8-12 to 8-17 sending 4-8 to 4-11 F ax Heading P osition setting 2-64 F ax Number setting 2-63 F AX ONL Y MODE description 5-2 setting 5-3 using 5-8 F ax/T el Mode descrip ...

  • Canon MultiPASSTM C50 - page 290

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-6 Index I Image Contrast setting 2-64 Include F ax Image setting 2-63 Incoming Ring setting 2-62 Ink Saver Mode setting 2-66 Ink tank 1-9, 2-29 BCI 21 Black 2-29 BCI-21 Colour 2-29 replacing 9-17 to 9-20 INST ALL BC-21 message 8-32 INST ALL BC-21/20 message 8-32 Installing BJ cartridges 2-31 to 2-35 In ...

  • Canon MultiPASSTM C50 - page 291

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-7 Index M Maintaining BJ cartridge 9-8 to 9-20 cleaning 9-2 to 9-7 Manual document feed 6-3, 6-5, 6-10, 6-11 feeder 2-21 feeding 2-49 receiving 5-2, 5-3, 5-6, 5-7 sending 4-6 Manual display See MANU AL MODE Manual document feed 6-3, 6-5, 6-10, 6-11 MANU AL MODE description 5-2 setting 5-3 using 5-6, 5- ...

  • Canon MultiPASSTM C50 - page 292

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-8 Index O Off Hook Alarm setting 2-63 On Error Resend setting 2-64 One-touch speed dial buttons 2-24 One-touch speed dialling changing names 3-5 to 3-7 changing numbers 3-5 to 3-7 deleting numbers 3-5, 3-6 description 3-2, 4-7 storing 3-3, 3-4 using 3-8, 3-9 with sequential broadcasting 4-18 Operation ...

  • Canon MultiPASSTM C50 - page 293

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-9 Index Print media 1-9 Back Print Film BF-102 2-38 Bubble J et Paper LC-301 2-38 Canon 2-38, 2-39 envelopes 2-37 F abric Sheets FS-101 2-39 High-Gloss Film HG-101 2-39 High Resolution Paper HR-101 2-38, 2-50 loading 2-44 to 2-52 plain 2-37 selecting 2-37 T -Shirt T ransfers TR-101 2-39 T ransparencies ...

  • Canon MultiPASSTM C50 - page 294

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-10 Index Regular dialling 4-7 Remote Identification Number setting 2-66 Remote Receive setting 2-66 Remote reception 5-6, 5-7 Removing document from ADF 4-13, 4-14 shipping materials 2-8 to 2-10 Replacing BJ cartridge 9-12 to 9-16 ink tanks 9-17 to 9-20 Report Memory Clear 4-25 Report Print setting 2- ...

  • Canon MultiPASSTM C50 - page 295

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-11 Index Serial number 8-3 Settings 2-61 to 2-73 accessing 2-71 to 2-73 general 2-62 list 2-61 to 2-70 other 2-67 receive settings 2-65 sending 2-63 speed dialling settings 2-67 unit 2-68 to 2-70 Sheet feeder 2-20 jams 8-8 problems feeding 8-9 to 8-11 Shipping materials removing 2-8 to 2-10 Silent Rece ...

  • Canon MultiPASSTM C50 - page 296

    Canon MultiP ASS C50 Hardware Manual ENGLISH I-12 Index U UHQ TM See Ultra High Quality Ultra High Quality 1-4, 4-3 UNIT N AME setting 2-58, 2-59, 2-63, 2-68 UNIT TELEPHONE # setting 2-58, 2-63, 2-68 Unpacking unit 2-5 to 2-10 User information entering 2-54, 2-58 to 2-60 USER SETTINGS 2-68 User’s guide 1-11, 2-6 MultiP ASS Desktop Manager for W i ...

Manufacturer Canon Category All in One Printer

Documents that we receive from a manufacturer of a Canon MultiPASSTM C50 can be divided into several groups. They are, among others:
- Canon technical drawings
- MultiPASSTM C50 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon MultiPASSTM C50
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon MultiPASSTM C50.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon MultiPASSTM C50, service manual, brief instructions and user manuals Canon MultiPASSTM C50. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon MultiPASSTM C50.

Similar manuals

A complete manual for the device Canon MultiPASSTM C50, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon MultiPASSTM C50 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon MultiPASSTM C50.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon MultiPASSTM C50 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon MultiPASSTM C50, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon MultiPASSTM C50, that we can find in the current document
3. Tips how to use the basic functions of the device Canon MultiPASSTM C50 - which should help us in our first steps of using Canon MultiPASSTM C50
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon MultiPASSTM C50
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon MultiPASSTM C50 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon MultiPASSTM C50?

Use the form below

If you did not solve your problem by using a manual Canon MultiPASSTM C50, ask a question using the form below. If a user had a similar problem with Canon MultiPASSTM C50 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)