-
Yamaha CLP-810S - page 1
IMPOR T ANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selec- tor is set for the voltage in your area. The voltage ...
-
Yamaha CLP-810S - page 2
92-469 1 ENVIRONMENTAL ISSUES: Yamaha strives to pro- duce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This ...
-
Yamaha CLP-810S - page 3
3 CLP-810S • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Do not place the instrument against a wall (allow at least 3 cm/one-inch from the wall), since this can cause inadequate air circulation, and possi- bly result in the instrument overheating. ...
-
Yamaha CLP-810S - page 4
4 CLP-810S Contents The Control Panel ............................................................................................ 5 Music Stand ..................................................................................................... 6 Playing the Clavinova ............................................................................... ...
-
Yamaha CLP-810S - page 5
5 CLP-810S The Control Panel Soft pedal 1 [POWER] Switch Press the [POWER] switch once to turn the power ON, a second time to turn the power OFF . When the power is turned ON, the POWER indicator (located to the left of the keyboard) will light. 2 [V ARIA TION] selector W ith the [V ARIA TION] selector in the OFF position, the CLP-810S produces its ...
-
Yamaha CLP-810S - page 6
6 CLP-810S T o raise the music stand: Z Pull the stand up and toward yourself as far as it will go. X Flip down the two metal supports at the left and the right on the rear of the music stand. C Lower the music stand so that it rests on the metal supports. As shown in the illustration, the angle of the music stand can be set in one of three positio ...
-
Yamaha CLP-810S - page 7
7 CLP-810S Playing the Clavinova T urn Power On .................................................................................................. After making sure that the Clavinova’ s AC cord is properly plugged into the Clavinova itself and plugged into a convenient AC wall outlet, press the [POWER] switch located to the right of the keyboard ...
-
Yamaha CLP-810S - page 8
8 CLP-810S The CLP-810 S includes three demo tunes that demonstrate its sound capa- bilities. Here is how you can select and play the demo tunes: NOTE • No MIDI reception occurs in the demo song mode. • The demo song data is not transmitted via the MIDI connectors. Playing the Demonstration T unes Select and Start a Demo T une ................. ...
-
Yamaha CLP-810S - page 9
9 CLP-810S The Pedals Soft (Left) Pedal ............................................................................................... The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not af fect notes which are already playing when it is pressed. Damper (Right) Pedal ...
-
Yamaha CLP-810S - page 10
10 CLP-810S T ransposition Z Simultaneously press and hold the A-1 and C # 0 keys. X Press any key between F # 2 and F # 3 according to the desired amount of transposition.* C Release the A-1 and C # 0 keys. The A-1 and C # 0 keys plus keys F # 2 through F # 3 on the keyboard are used for transposition. The Clavinova’s TRANSPOSE function makes it ...
-
Yamaha CLP-810S - page 11
11 CLP-810S T uning T uning makes it possible to adjust the pitch of the Clavinova over a 427.0 Hz … 453.0 Hz (corresponding to the A3 note’s Hz) range in approximately 0.2 Hertz intervals. Pitch control is useful for tuning the Clavinova to match other instruments or recorded music. T uning Up .................................................. ...
-
Yamaha CLP-810S - page 12
12 CLP-810S MIDI T ransmit & Receive Channel Selection .................................................................................................. Tone Generator MIDI IN MIDI IN MIDI THRU DOU-10 MIDI OUT Clavinova (Set to receive on MIDI channel 2) (Set to receive on MIDI channel 1) MIDI Functions ● A Brief Introduction to MIDI DOU-10 ...
-
Yamaha CLP-810S - page 13
13 CLP-810S A -1 C # 0 C 1 D # 2 C 4 D # 5 13568 1 0 1 2 1 3 1 5 135 68 1 0 1 2 1 3 1 5 2 4 7 9 11 14 16 2 4 7 9 11 14 16 E 5 E 2 ● Setting the Clavinova MIDI Channels For setting the transmit channel. (C1 ~ D # 2) For setting the receive channel. (C4 ~ D # 5) For ALL mode Z Simultaneously press and hold the A-1 and C # 0 keys. X Press the key on ...
-
Yamaha CLP-810S - page 14
14 CLP-810S T roubleshooting If you encounter what appears to be a malfunction, please check the follow- ing points before assuming that your Clavinova is faulty . 1. No Sound When the Power is T urned ON Is the AC plug properly connected to the Clavinova and an AC wall outlet? Check the AC connection carefully . Is the MASTER VOLUME control turned ...
-
Yamaha CLP-810S - page 15
15 CLP-810S (3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the damper pedal will continue to sound until the pedal is relea ...
-
Yamaha CLP-810S - page 16
16 CLP-810S MIDI Data Format MIDI Master Volume • Simultaneously changes the volume of all channels. • When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Messag ...
-
Yamaha CLP-810S - page 17
17 CLP-810S YAMAHA [Clavinova] Date: 1/22, 1998 Model: CLP-810S MIDI Implementation Chart Version: 1.0 Function Transmitted Recognized Remarks Basic Default 1 1 Channel Changed 1~16 1~16 Default 3 1 *1 Poly Mode only Mode Messages XX Altered ***************** X Note 9~120 0~127 Number : True voice ***************** 21~108 Velocity Note on O 9nH, v= ...
-
Yamaha CLP-810S - page 18
18 CLP-810S 1 • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Be sure to use the correct screw size, as indicated above. Use of incorrect screws can cause damage. • Be sure to ...
-
Yamaha CLP-810S - page 19
19 CLP-810S 2 3 D D C D D ● Align the cut corner of the bracket with the corresponding cutouts on the feet. 5 x 40 mm long gold screws 1 6 x 20 mm round-head screws 2 X Assemble the side panels (D) and feet (E). Secure the feet (E) to the side panels (D) with the 5 x 40 millimeter long gold-colored screws 1 (3 each), making sure that the cutouts ...
-
Yamaha CLP-810S - page 20
20 CLP-810S 4 V Attach the center panel (B) to the side pan- els (D). The center panel (B) is installed between the side panels (D) with the brackets on each end toward the rear of the stand assem- bly. Place the square holes in the center-panel brackets over the lugs extending from the side panels, then slide down. Each side of the center panel is ...
-
Yamaha CLP-810S - page 21
21 CLP-810S 10 cm 10 cm 5 A A D ● Be sure to place your hands at least 10 centimeters from either end of the main unit when posi- tioning it. 6 x 16 mm flat-head screws 3 A D B Install the main unit (A). Place the main unit (A) on the side panels (D) with the screws on its bottom panel (toward the rear of the main unit) just behind the grooves in ...
-
Yamaha CLP-810S - page 22
22 CLP-810S 6 7 240 127 110 220 Cord holder ● A voltage selector is provided in some areas. N Connect the pedal cord. Pass the pedal cord through the two cord holders on the side panel. Plug the free end of the cord into the PEDAL connector on the rear of the main unit. M Voltage Selector Before connecting the AC power cord, check the setting of ...
-
Yamaha CLP-810S - page 23
23 CLP-810S C 8 • When moving the instrument after assembly, always hold the lower surface of the main unit, NEVER the top portion. Improper handling can result in damage to the instrument or personal injury. < Set the adjuster. For stability, an adjuster is provided on the bottom of the pedal box (C). Rotate the adjuster until it comes in fir ...
-
Yamaha CLP-810S - page 24
24 CLP-810S KEYBOARD POLYPHONY VOICES REVERB CONTROL PEDAL CONTROLS OTHER CONTROL JACKS/CONNECTORS MAIN AMPLIFIERS SPEAKERS DIMENTIONS Music stand down (W x D x H) Music stand up WEIGHT CLP-810S 88 KEYS (A-1 ~ C7) 32 NOTES MAX. PIANO, PIANO Variation MIN — MAX SOFT, DAMPER MASTER VOLUME PHONES x 2, MIDI IN, OUT, PEDAL 40W (20W x 2) 14 cm x 2 1379 ...
-
Yamaha CLP-810S - page 25
25 CLP-810S WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These pre- cautions include, but are not limited to, the following: 1. Read all Safety Instructions, Installation Instructions, Special Message Section items, and any Assembly Instructions found in this manual BEFORE marking any conn ...
-
Yamaha CLP-810S - page 26
FCC INFORMA TION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions con- tained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to acces ...
-
Yamaha CLP-810S - page 27
For details of products, please contact your nearest Yamaha or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Nie- derlassung und bei Yamaha Ve ...
-
Yamaha CLP-810S - page 28
M.D.G., EMI Division © Yamaha Corporation 1998 VZ82600 802POCP3.3-01A0 Printed in Japan ...
Do you have a question concerning Yamaha CLP-810S?
Use the form below
If you did not solve your problem by using a manual Yamaha CLP-810S, ask a question using the form below. If a user had a similar problem with Yamaha CLP-810S it is likely that he will want to share the way to solve it.