-
JVC HR-VP434U - page 1
H R-VP434U VIDEO CASSETTE RECORDER INSTRUCTIONS PU30425-1780 For Customer Use: Enter below the Serial No. which is located on the rear of cabinet. Retain this information for future reference. Model No. HR-VP434U Serial No. POWER 2 2 REW FF PLAY VIDEO AUDIO MENU CH OK q REC 5 / 8 STOP/EJECT PAUSE 6 HMS I T R T ...
-
JVC HR-VP434U - page 2
2 Dear Customer , Thank you for purchasing the JVC VHS video cassette recorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: This video cassette recorder sh ...
-
JVC HR-VP434U - page 3
3 IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety . In order not to defeat the built-in safeguards, observe the following basic rules for its install ...
-
JVC HR-VP434U - page 4
4 SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Ref ...
-
JVC HR-VP434U - page 5
5 CONTENTS T IMER RECORDING 33 VCR Plus+ Timer Programming ............ 33 Enter Program Information .............................. 33 Instant Timer Recording (ITR) ............... 35 On-Screen Timer Programming ........... 35 Check And Cancel Programs .......................... 37 Auto T imer ...................................................... ...
-
JVC HR-VP434U - page 6
6 CH3 CH4 AUDIO VIDEO INST ALLING YOUR NEW VCR CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “SPECIFICA TIONS” ( Z pg. 52). SITUA TE VCR 2 Place the VCR on a stable, horizontal surface. CONNECT VCR TO TV 3 The connection method you use depends on the type of TV you have. RF Connection ● T o Connect T o A TV ...
-
JVC HR-VP434U - page 7
7 INITIAL SETTINGS Dual Quick Set IMPORT ANT ● Don’t press any buttons on the VCR or remote during Dual Quick Set. ● If you perform Dual Quick Set successfully , there’ s no need to perform the Clock ( Z pg. 8) and T uner ( Z pg. 12) procedures. If, however , you want to add or delete channels, refer to “Add Or Delete A Channel” on page ...
-
JVC HR-VP434U - page 8
8 INITIAL SETTINGS (cont.) Clock 2 2 q5 / 8 6 POWER OK MENU MAIN MENU PROGRAM SET FUNCTION SET TUNER SET = CUSTOM SET AUTO PICTURE PRESS ( 5 , ∞ ), THEN (OK) PRESS (MENU) TO END CH 5∞ Preparation TURN ON THE VCR 1 Press POWER . If watching channel 3 or 4, press TV/VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel. AC ...
-
JVC HR-VP434U - page 9
9 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 CH MENU OK CH OK MENU SHUTTLE PLUS Clock Setting This step must be performed before going on to Auto, Semi-Auto or Manual clock setting procedures (each starts from step 2 ). ACCESS MODE SELECT SCREEN 1 Place the arrow at the Custom Set screen next to “OVERRIDE AUT O CLOCK SET” by pressing CH 5 ∞ o ...
-
JVC HR-VP434U - page 10
10 12 45 3 6 8 0 7 9 SELECT TIME ZONE 5 Y ou can either select “AUT O”, or select the correct zone. If you selected "AUT O" in step 4 and if you live near the boundary of an adjacent time zone, or receive cable TV channels, a PBS channel from a different time zone may become your host channel. Therefore, in this case make ...
-
JVC HR-VP434U - page 11
11 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 CH MENU OK CH OK MENU NUMBER SHUTTLE PLUS Manual SELECT MODE 2 At the Override Auto Clock Set screen, place the arrow next to “MANUAL CLOCK SET” by pressing CH ▲▼ or SHUTTLE PLUS 5 ∞ , then press OK . SET DA TE, TIME AND D.S.T . 3 The Manual Clock Set screen is displayed and the first setting ...
-
JVC HR-VP434U - page 12
12 T uner Set Receivable Channels TURN ON THE VCR 1 Press POWER . If watching on channel 3 or 4, press TV/ VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel. ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCESS TUNER SET SCREEN 3 Place the arrow next to "TUNER SET" by pressing CH 5 ∞ or SH ...
-
JVC HR-VP434U - page 13
13 PERFORM AUTO CHANNEL SET 6 Place the arrow next to "AUT O CHANNEL SET" by pressing CH 5 ∞ or SHUTTLE PLUS 5 ∞ , then press OK . Receivable channels in your area are automatically assigned to the CH 5 ∞ buttons, and non-receivable channels are skipped. NOTES: ● At the end of Auto Channel Set, “SCAN COM- PLETED” appears on sc ...
-
JVC HR-VP434U - page 14
14 Add Or Delete A Channel ACCESS TUNER SET SCREEN 1 Access by performing steps 2 and 3 of the T uner procedure on page 12. ● T o add a channel, go to step 2 . ● T o delete a channel, skip to step 4 . ACCESS AFC SCREEN 2 Place the arrow next to "AFC" by pressing CH 5 ∞ or SHUTTLE PLUS 5 ∞ , then press OK . MAKE SELECTION 3 Place t ...
-
JVC HR-VP434U - page 15
15 This procedure is required if you receive your TV channels through a cable box (descrambler). The Cable Box Controller allows the VCR to automatically switch cable box channels, allowing you to timer -record programs from various cable stations. The Cable Box Controller is effective for recording shows that have been programmed using VCR Plus+ ( ...
-
JVC HR-VP434U - page 16
16 Set Cable Box Output Channel 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 CH MENU OK CH MENU SHUTTLE PLUS POWER POWER OK TV/VIDEO TURN ON THE VCR 1 Press POWER . If watching channel 3 or 4, press TV/ VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel. ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCE ...
-
JVC HR-VP434U - page 17
17 SELECT CABLE BOX OUTPUT CHANNEL 6 Y our selection depends on how your cable box is connected to your VCR. If your cable box is connected to your VCR using an RF connection . . . . . . press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to the channel number representing the cable box’ s output (2–6). If your cable box is connected t ...
-
JVC HR-VP434U - page 18
18 RETURN TO NORMAL SCREEN 4 Press MENU as many times as necessary . Y ou can now set up the VCR Plus+ feature ( Z pg. 19). CABLE BOX BRAND LIST BRAND CODE ARCHER 52, 53, 54, 85, 86 CABLEVIEW 85, 86 CITIZEN 85, 86 CURTIS 13, 14, 15, 16 DIAMOND 52, 53, 54 EAGLE 30, 31, 32, 33, 34, 35, 36, 37 EASTERN 51 GC BRAND 85, 86 GEMINI 55, 56 GENERAL ELECTRIC ...
-
JVC HR-VP434U - page 19
19 The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record (found in most TV listings) and the VCR’ s timer is automatically programmed. Depending on the TV or cable stations that you ...
-
JVC HR-VP434U - page 20
20 ACCESS CUSTOM SET SCREEN 3 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to “CUST OM SET”, then press OK . ACCESS VCR PLUS+ SET -UP SCREEN 4 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place the arrow next to “VCR PLUS+ SET -UP”, then press OK . ACCESS GUIDE CHANNEL SET SCREEN 5 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to place th ...
-
JVC HR-VP434U - page 21
21 INPUT RECEIVING CHAN- NEL NUMBER 7 Press CH 5 ∞ , SHUTTLE PLUS 5 ∞ or the appropriate NUMBER keys to input the number of the channel on which the Guide Channel’ s broadcasts are received. Then press OK . ● If there is more than one mismatch, repeat steps 6 and 7 for each instance. RETURN TO VCR PLUS+ SET -UP SCREEN 8 Press MENU . CHECK I ...
-
JVC HR-VP434U - page 22
22 12 45 3 6 8 0 7 9 SIMPLE PLA YBACK AND RECORDING LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’t apply too much pressure when inserting. ● The VCR’ s power comes on automatically . ● If watching channel 3 or 4, p ...
-
JVC HR-VP434U - page 23
23 Simple Recording 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 NUMBER SP/EP PAUSE STOP REC PLAY PAUSE REC STOP/EJECT PLAY LOAD A CASSETTE 1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. SELECT RECORDING CHANNEL 2 Press CH 5 ∞ . Or press the appropriate NUMBER keys, then press E ...
-
JVC HR-VP434U - page 24
24 Auto Picture PLA YBACK AND RECORDING FEA TURES Y our VCR is equipped with the Auto Picture feature, which checks the condition of the tape and compensates accordingly , giving you the best-possible playback picture every time. The default setting is "ON". 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 POWER OK CH POWER TV/VIDEO MENU OK MEN ...
-
JVC HR-VP434U - page 25
25 Playback The VCR assesses the quality of the tape once you initiate playback. Before beginning, perform steps 1 and 2 on page 22. 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 PLAY ST ART PLA YBACK 1 Press PLA Y . ● The VCR adjusts the playback picture quality based on the quality of the tape in use. ● The Auto Picture screen only appears at th ...
-
JVC HR-VP434U - page 26
26 P AUSE DURING PLA YBACK 1 Press P AUSE . If there is vertical jitter , press CH 5 or ∞ on the VCR's front panel or remote to stabilize the picture. FRAME-BY -FRAME PLA YBACK 2 Advance the tape one frame by pressing P AUSE again. ● T o control the direction of Frame-by-Frame playback, press SHUTTLE PLUS ™ or £ during still picture mod ...
-
JVC HR-VP434U - page 27
27 2 2 q5 / 8 6 Manual T racking Once playback begins, the VCR’ s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually . ENGAGE MANUAL TRACKING MODE 1 During playback, press the CH 5 ∞ buttons on the VCR's front panel simultaneously to cancel the automatic tracking ...
-
JVC HR-VP434U - page 28
28 PLA YBACK AND RECORDING FEA TURES (cont.) Superimpose This function, switchable between ON and OFF , determines whether or not operational indicators will appear on screen. ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION SET" by pressing CH 5 ∞ or SHUTTL ...
-
JVC HR-VP434U - page 29
29 Skip Search Repeat Playback ST ART REPEA T 1 Press and hold PLA Y (until "PLA Y" blinks on the front display panel) during playback, then release. ● The entire tape is played back 20 times. STOP REPEA T 2 T o stop, press STOP at any time. NOTE: Pressing PLA Y , REW , FF , P AUSE or SHUTTLE PLUS ™ or £ also stops Repeat Playback. I ...
-
JVC HR-VP434U - page 30
30 PLA YBACK AND RECORDING FEA TURES (cont.) Instant ReV iew At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer -recorded program. ACTIV A TE INST ANT REVIEW 1 After ensuring that the VCR is off and the T imer mode is disengaged, press REVIEW . ● The power comes on and the VCR searches for ...
-
JVC HR-VP434U - page 31
31 COUNT 0:33:27 T ape Position Indicator The T ape position indicator appears on screen when, from the stop mode, you press FF , REW or perform an Index Search or Instant ReV iew . The position of " " in relation to "B" (Beginning) or "E" (End) shows you where you are on the tape. NOTE: "SUPERIMPOSE" must be ...
-
JVC HR-VP434U - page 32
32 PLA YBACK AND RECORDING FEA TURES (cont.) Record One Program While W atching Another ENGAGE TV MODE 1 During recording... ● If using the RF connection ( Z pg. 6), press TV/VIDEO . The VCR's VIDEO indicator goes out and the TV broadcast being recorded disappears. ● If using the A V connection ( Z pg. 6), change the TV's input mode f ...
-
JVC HR-VP434U - page 33
33 VCR Plus+ Timer Pr ogramming 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 MENU OK OK MENU NUMBER NUMBER "9" NUMBER "8" TIMER TV/VIDEO CANCEL TIMER RECORDING LOAD A CASSETTE 1 Make sure the record safety tab is present. ● The VCR’ s power comes on automatically . ● If you’re watching on channel 3 or 4, press TV/VIDEO to ...
-
JVC HR-VP434U - page 34
34 TIMER RECORDING (cont.) 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 CH OK OK MENU TIMER SHUTTLE PLUS SET T APE SPEED 5 Press SP/EP . CHECK/CORRECT INPUT DA T A 6 If the data is correct as it is, go to step 7 . If not, press OK or SHUTTLE PLUS ™£ until the item you want to change begins to blink. Then press the appropriate NUMBER keys, CH 5 ∞ ...
-
JVC HR-VP434U - page 35
35 Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished. ST ART RECORDING 1 Press REC . ENGAGE ITR MODE 2 Press REC again. ITR blinks and 0:30 appears on the front display panel. SET RECORDING DURA TION 3 If you want to rec ...
-
JVC HR-VP434U - page 36
36 12 45 3 6 8 0 7 9 2 2 q5 / 8 6 CH MENU OK CH OK MENU NUMBER NUMBER "9" NUMBER "8" TIMER SHUTTLE PLUS SELECT PROGRAM NUMBER 3 Press the appropriate NUMBER keys or CH 5 ∞ or SHUTTLE PLUS 5 ∞ to select a vacant program number , then press OK . The first time you do this, all numbers will be vacant, so just press ...
-
JVC HR-VP434U - page 37
37 DISENGAGE TIMER 1 Press TIMER , then press POWER . ACCESS PROGRAM SET SCREEN 2 Press MENU , then press OK . CHECK PROGRAM INFOR- MA TION 3 Press CH 5 ∞ or SHUTTLE PLUS 5 ∞ to check the programs in succession. Check And Cancel Pr ograms CANCEL A PROGRAM 4 Press CANCEL . ● Repeat steps 3 and 4 as many times as necessary . RETURN TO NORMAL SC ...
-
JVC HR-VP434U - page 38
38 Auto Timer When activated, this function automatically engages the timer when the VCR's power is turned off, and disengages it when the power is turned on. ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION SET" by pressing CH 5 ∞ or SHUTTLE PLUS 5 ∞ ...
-
JVC HR-VP434U - page 39
39 Edit T o Or Fr om Another VCR Y ou can use your VCR as the player or the recorder . MAKE CONNECTIONS 1 Connect an A V cable (not supplied) between the player ’ s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors. ● When connecting to a Hi-Fi VCR, connect your VCR's AUDIO IN/OUT connector to the AUD ...
-
JVC HR-VP434U - page 40
40 2 2 q5 / 8 6 Edit Fr om A Camcorder Y ou can use a camcorder as the player and your VCR as the recorder . AUDIO IN VIDEO IN Camcorder Player 12 45 3 6 8 0 7 9 NUMBER "0" Recorder Y our VCR EDITING (cont.) AUDIO OUT VIDEO OUT MAKE CONNECTIONS 1 Connect an A V cable (not supplied) between the camcorder ’ s VIDEO OUT and AUD ...
-
JVC HR-VP434U - page 41
41 Assemble Editing Assemble Editing adds one recorded scene to another in succession. T o use your VCR as the recorder ... LOAD CASSETTES 1 Insert the original cassette in the player , and the recording cassette in the recorder . SET T APE SPEED 2 Set to "SP" or "EP" by pressing the SP/EP button on the remote control. ENGAGE RE ...
-
JVC HR-VP434U - page 42
42 SPECIAL FEA TURES 12 45 3 6 8 0 7 9 POWER NUMBER ENTER CH VOL. +/- TV/VIDEO STOP TV/CABLE/VCR TV Multi-Brand Remote Contr ol The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below . TURN ON THE TV 1 T urn the power on using the TV's remote contro ...
-
JVC HR-VP434U - page 43
43 12 45 3 6 8 0 7 9 POWER NUMBER ENTER CH STOP TV/CABLE/VCR Cable Box Multi-Brand Remote Contr ol The VCR's remote control can control functions on the brands of cable boxes listed below . Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes. CABLE BOX BRAND NAME ...
-
JVC HR-VP434U - page 44
44 SPECIAL FEA TURES (cont.) Contr ol T wo JVC VCRs The supplied remote control is capable of controlling two JVC VCRs independently using the A/B CODE switch. Y ou can set this VCR so it responds to remote commands only when the switch is set to B , and another VCR so it responds to commands when the switch is set to A . The switch is preset to A ...
-
JVC HR-VP434U - page 45
45 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POWER POSSIBLE CAUSE ● The power cord is disconnected. ● The TIMER mode is engaged with Auto T imer set to &q ...
-
JVC HR-VP434U - page 46
46 TROUBLESHOOTING (cont.) SYMPTOM 1. T imer recording won’t work. 2. On-screen timer programming won’t work. 3. TIMER and ] on the front display panel won’t stop blinking. 4. The cassette is automatically ejected, and TIMER and ] on the front display panel won’t stop blinking. 5. TIMER blinks for 10 seconds and the timer mode is disengaged ...
-
JVC HR-VP434U - page 47
47 OTHER PROBLEMS CORRECTIVE ACTION If you need the skipped channels, restore them ( Z pg. 14). Press P AUSE to pause the recording, change channels, then press PLA Y to resume recording. Set the switch to TV . Set the switch to CABLE. Select a different Host Channel during the Semi-Auto setting procedure ( Z pg. 9), or perform the Manual setting p ...
-
JVC HR-VP434U - page 48
48 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the VCR indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads. Q. During search, slow , still and frame-by-frame playback, I ...
-
JVC HR-VP434U - page 49
49 INDEX List Of T erms This guide serves as a quick way to locate frequently used terms and on-screen display names. The first page on which the term appears is listed. Most terms appear more than once in the instruction manual. A A/B Code .................................................................... 44 Add Channel ......................... ...
-
JVC HR-VP434U - page 50
50 INDEX (cont.) FRONT VIEW 1 Power ON/OFF Button ( Z pg. 8) 2 Cassette Loading Slot 3 Rewind Button ( Z pg. 22) Reverse Search Button ( Z pg. 26) 4 Play Button ( Z pg. 22) 5 Fast-Forward Button ( Z pg. 22) Forward Search Button ( Z pg. 26) 6 V ideo Input Connector ( Z pg. 40) 7 Audio Input Connector ( Z pg. 40) 8 Menu Button ( Z pg. 8) 9 Front Dis ...
-
JVC HR-VP434U - page 51
51 FRONT DISPLA Y P ANEL 1 V ideo Mode Indicator ( Z pg. 8) 2 Instant T imer Recording Indicator ( Z pg. 35) 3 T imer Mode Indicator ( Z pg. 34) 4 Clock Display ( Z pg. 7) 5 Counter Display ( Z pg. 30) 6 Recording Mode Indicator ( Z pg. 23) 7 Play Mode Indicator ( Z pg. 22) 8 “Cassette Loaded” Mark 9 Counter Memory Mark ( Z pg. 30) 0 T ape Spee ...
-
JVC HR-VP434U - page 52
52 GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption : 19 W T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 360 x 94 x 276 mm (14-3/16" x 3-3/4" x 10-7 /8") W eight : 3.4 kg (7.5 lbs) Format : VHS NTSC ...
-
JVC HR-VP434U - page 53
53 HOW TO LOCA TE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-252-5722 JVC SERVICE & ENGINEERING COMP ANY OF AMERICA DIVISION OF US JVC CORP . F ACTOR Y SER VICE CENTER LOCA TIONS If you ship the product... ACCESSORIES 107 Little Falls Road 1500 Lakes Parkway 705 Enterprise Street Fairfield, NJ 07004-2105 Lawrenceville, GA 30243-5357 Aurora, IL 60 ...
-
JVC HR-VP434U - page 54
54 LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below . ("The Warranty Period") THIS LIMIT ...
-
JVC HR-VP434U - page 55
55 ...
-
JVC HR-VP434U - page 56
HR-VP434U COPYRIGHT © 1996 VICTOR COMPANY OF JAPAN, LTD. ...
Do you have a question concerning JVC HR-VP434U?
Use the form below
If you did not solve your problem by using a manual JVC HR-VP434U, ask a question using the form below. If a user had a similar problem with JVC HR-VP434U it is likely that he will want to share the way to solve it.