English dropdown-ico

Manual Napco Security Technologies GEM-P816

16 pages 0.18 mb
Download

Go to site of 16

Summary
  • Napco Security Technologies GEM-P816 - page 1

    R INS TALLATION INS TALLATION INST RUCTIONS INST RUCTIONS GEM-RP3DGT L Digital Ke ypad W I982A 6/99 © Napco 1999 Quick Start: 1. Referring to the control panel wiring diagram, connect siren, aux. power, pgm. output, remote bus, earth ground, zone and telephone wiring. NOTE: See Installation Instructions for the appropriate control panel. 2. Connec ...

  • Napco Security Technologies GEM-P816 - page 2

    2 ...

  • Napco Security Technologies GEM-P816 - page 3

    INTRODUCTION The GEM-RP3DGTL is a dual 7-segment digital keypad that is compat ible with the NAPCO GEM-Series GEM-P816, P1632, P3200 & P9600 control-panels. Refer to User Guide OI249 for operation instructions. While the GEM-RP3DGTL may be used to fully program the control, the GEM-RP1CAe2 keypad provides the optimum in ease of keypad programmi ...

  • Napco Security Technologies GEM-P816 - page 4

    EASY PROGRAM MODE OVERVIEW ENTERING THE EASY KEYPAD PROGRAM MODE 1 Enter the Dealer Security Code (default = 456789) for a new panel or enter your custom Dealer Program Code if programmed and press A 2 Press NO ( F ) repeatedly until function “ 17 “ (Activate Program Mode) is displayed. NOTE: If you pass “ 17 “ you can scroll back by pressi ...

  • Napco Security Technologies GEM-P816 - page 5

    Total Number of Zones in Area 1 (Appears for New Panel Only) Press the A button and then directly enter the total number of zones to be programmed for Area 1. Valid entries are from 01 to 32. Directly enter the total number of zones, including leading zeros. Use number buttons 1 through 9 . NOTE: Press the 0 button for a zero. The system is based o ...

  • Napco Security Technologies GEM-P816 - page 6

    Entry/Exit Zones in Area 1 (Appears for New Panel Only) Press the A button and then directly enter the zone number of any zones which are to be used as Entry/Exit zones. Valid entries are from 01 to 32. Di- rectly enter each zone number, including leading zeros. Use number buttons 0 through 9 . Press J to save and then repeat for any additional zon ...

  • Napco Security Technologies GEM-P816 - page 7

    7 Central Station Receiver 1 Format From the table below, enter the central station's receiver format. Use number buttons 1 through 9 . NOTE: Press G0 for a zero and 0 for a blank space (•). Press G 1 through G 4 for letters B–E, respectively. Press J to save. Press NEXT ( E ) button to proceed. NOTE: Central Station Receiver 2 and 3 Forma ...

  • Napco Security Technologies GEM-P816 - page 8

    RF Transmitter Programming (For wireless systems only. Also see Quick Method, which follows) Press the A button and for each transmitter (key fob transmitters also), then directly enter: 1 The zone number (01–32) to which the transmitter will be mapped, including leading zeros. 2 The 6-digit RF ID # printed on the transmitter and box. 3 The 1-dig ...

  • Napco Security Technologies GEM-P816 - page 9

    9 Key Fob Transmitters Keyfobs can be programmed as “Arm/Disarm” devices using the ON and OFF buttons (refer to control panel installation instructions). Press the A button and for each Key Fob Transmitter, enter: 1 The Key Fob Transmitter number (01–15). 2 The area number to which transmitter is assigned (1 or 2); enter 0 to disable keyfob. ...

  • Napco Security Technologies GEM-P816 - page 10

    Total Number of Zones and Keypads in Area 1. Total Number of Zones and Keypads in Area 2. (Appears for New Panel Only) 1 Press the A button and then press 3 to select the total number of zones to be programmed for Area 1. Valid entries are from 08 to 24 in multiples of 4. 2 Press 2 and press 3 to select the total number of keypads to be programmed ...

  • Napco Security Technologies GEM-P816 - page 11

    11 Central Station Receiver 1 Format From the table below, enter the central station's receiver format. Use number buttons 1 through 9 . NOTE: Press G0 for a zero and 0 for a blank space (•). Press G 1 through G 4 for letters B–E, respectively. Press J to save. Press NEXT ( E ) button to proceed. NOTE: Central Station Receiver 2 and 3 Form ...

  • Napco Security Technologies GEM-P816 - page 12

    12 RF Transmitter Programming (For wireless systems only. Also see Quick Method, which follows) Press the A button and for each transmitter and directly enter: 1 The zone number (01–96) to which the transmitter will be mapped, including leading zeros. 2 The 6-digit RF ID # printed on the transmitter and box. 3 The 1-digit checksum number (C) prin ...

  • Napco Security Technologies GEM-P816 - page 13

    Key Fob Transmitters Keyfobs can be programmed as “Arm/Disarm” devices using the ON and OFF buttons (refer to control panel installation instructions). Press the A button and for each Key Fob Transmitter, enter: 1 The Key Fob Transmitter number (01–15). 2 The area number to which transmitter is assigned (1-8); enter 0 to disable keyfob. 3 The ...

  • Napco Security Technologies GEM-P816 - page 14

    DIRECT ADDRESS PROGRAM MOD E This is an extension of the Dealer Program Mode. This method of programming is used in conjunction with the Keypad Programming Worksheets contained in the control panel programming guide. Refer to these worksheets to identify the 4-digit location (address) of the feature to be programmed. An illustrative example is prov ...

  • Napco Security Technologies GEM-P816 - page 15

    15 ...

  • Napco Security Technologies GEM-P816 - page 16

    NAPCO SECURITY SYSTEMS, INC. (NAPCO) war- rants its products to be free from manufacturing defects in materials and workmanship for thirty-six months fol- lowing the date of manufacture. NAPCO will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original pur- chaser or user. This ...

Manufacturer Napco Security Technologies Category Door

Documents that we receive from a manufacturer of a Napco Security Technologies GEM-P816 can be divided into several groups. They are, among others:
- Napco Security Technologies technical drawings
- GEM-P816 manuals
- Napco Security Technologies product data sheets
- information booklets
- or energy labels Napco Security Technologies GEM-P816
All of them are important, but the most important information from the point of view of use of the device are in the user manual Napco Security Technologies GEM-P816.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Napco Security Technologies GEM-P816, service manual, brief instructions and user manuals Napco Security Technologies GEM-P816. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Napco Security Technologies GEM-P816.

Similar manuals

A complete manual for the device Napco Security Technologies GEM-P816, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Napco Security Technologies GEM-P816 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Napco Security Technologies GEM-P816.

A complete Napco Security Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Napco Security Technologies GEM-P816 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Napco Security Technologies GEM-P816, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Napco Security Technologies GEM-P816, that we can find in the current document
3. Tips how to use the basic functions of the device Napco Security Technologies GEM-P816 - which should help us in our first steps of using Napco Security Technologies GEM-P816
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Napco Security Technologies GEM-P816
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Napco Security Technologies GEM-P816 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Napco Security Technologies GEM-P816?

Use the form below

If you did not solve your problem by using a manual Napco Security Technologies GEM-P816, ask a question using the form below. If a user had a similar problem with Napco Security Technologies GEM-P816 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)