-
Integra DSR-4.8 - page 1
DSR-4.8 Instruction Manual DVD Receiver ...
-
Integra DSR-4.8 - page 2
2 Impor tant Safety Instructions 1. Read these instructions. 2. Ke ep these instru ctions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block any v entilation openings. Install in accordance with the manufact urer’ s instructions. 8. Do not install near an y ...
-
Integra DSR-4.8 - page 3
3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyright ed material i s illeg al with- out the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact the dealer from whom you purchased this unit. 3. Care —Occasion ...
-
Integra DSR-4.8 - page 4
4 Precautions —Continued 10. Region Numbers —The D VD standard uses region numbers to control how di scs can be played around the world, the w orld being di vided into six regions. This unit will only play D VD discs that match its region number , which can be found on its rear panel (e.g., , ). 11. About this Manual —This manual explains ho ...
-
Integra DSR-4.8 - page 5
5 Thank you for purchasing an Inte gra D VD receiver. Read this manual carefully before using your ne w D VD receiv er. A good understanding of its features and oper- ation will allo w you to achieve optimum performance and enjoyment. Keep this manual for future reference. Supplied Accessories Make sure you ha ve the follo wing accessories: Remote ...
-
Integra DSR-4.8 - page 6
6 Intr oduction Highlights •D o l b y *1 Digital, DTS *2 • D VD-Video, Video CD , audio CD •M P 3 , W M A *3 , JPEG • D VD-Audio and Super A u dio CD • CD-R/R W , D VD-R/RW , and D VD+R/RW com- patible • HDMI *4 digital interface Video • HDMI Pass-Thru (1080p Compatible; 1 Input/1 Output) • HDTV -Capable (50 MHz) • JPEG in High De ...
-
Integra DSR-4.8 - page 7
7 Contents Overvie w Important Safety Instructions .................................... 2 Precautions ............................................................... 3 Supplied Accessories ................................................ 5 Introduction ............................................................... 6 Features ...................... ...
-
Integra DSR-4.8 - page 8
8 Introduction —Continued Supported Discs The D VD receiver supports the follo wing discs. • The D VD receiver does not support disc types not listed. • The D VD receiver supports 8 cm and 12 cm discs. • Don’ t use discs with an unusual shape, such as those shown below , because you may damage the D VD recei ver. • Don’ t use discs th ...
-
Integra DSR-4.8 - page 9
9 Intr oduction —Continued MP3/WMA/JPEG Compatibility • The D VD receiv er can play/display MP3, WMA, and JPEG files recorded on CD-R, CD-R W , DVD-R, D VD-R W , D VD+R and DVD+R W discs. • Discs must be in ISO 9660 Lev el 2 or Joliet format (folders can be up to eight lev e ls deep). Music files recorded on discs that use the HFS (hierarch i ...
-
Integra DSR-4.8 - page 10
10 Introduction —Continued Copyright It is forbidden by law to cop y , broadcast, show , broad- cast on cable, play in public, or rent copyrighted material without permission. D VD-V ideo discs are co py-protected, and any record- ings made from these discs will be distorted. This product incorporates copyright pro tection technol- ogy that is pr ...
-
Integra DSR-4.8 - page 11
11 Bef ore Using the D VD receiver Notes: • If the remote controller doesn’ t work reliably , try replacing both batteries. • Don’t mix new and old batteries, or different types of batteries. • If you intend not to use the remote controller for a long time, remov e the batteries to pre vent possible leakage and corrosion. • Flat batteri ...
-
Integra DSR-4.8 - page 12
12 Fr ont & Rear P anels For detailed information, ref er to the pages in brackets. Standby/On b utton [28] This but ton is used to set the D VD recei ver to On or Standby . Standby indicator [28] This indicator lights up when the D VD receiv er is in Standby . Input selector [31] and indicator This selector is used to select from t ...
-
Integra DSR-4.8 - page 13
13 Fr ont & Rear P anels —Continued MUTING indicato r This indicator flas hes while the D VD receiver is muted. T uning indi cators AU T O : This indicator lights up when the Auto T un- ing mode is selected, and disappears when the Man- ual T uning mode is selected. : This indicator lights up when the D VD receiv er is tuned into a ra ...
-
Integra DSR-4.8 - page 14
14 Front & Rear P a nels —Continued SPEAKERS [18] These terminal posts are for connecting your front speakers. HDMI IN/OUT [26] HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video. The HDMI input is for connecting components with HDMI outputs. The HDMI output is for connecting a TV or projec ...
-
Integra DSR-4.8 - page 15
15 Fr ont & Rear P anels —Continued Standby/On b utton* [28] This button is used to set the D VD rec eiv er to Standby or turn on. Don’t turn on the D VD receiver u ntil you’ ve com - pleted, and double checked all connections (pages 23–27). Number b uttons* [43, 44, 64] These butt ons are used to enter title, chapter , and trac ...
-
Integra DSR-4.8 - page 16
16 Front & Rear P a nels —Continued Basic Playback b uttons* Pause b utton [33 , 35] This button is used to pause playback. While play- back is paused, pressing this button mo ves the video forward one frame at a time. Play butt on [33] This button is used to start playback. Stop button [34] This button is used to stop playback. Fast Re v ...
-
Integra DSR-4.8 - page 17
17 Connecting the D VD receiver Fro nt Left and Right Speake rs • Place the front le ft and right speakers sy mmetrically and so that the distance from the listening position is the same. • When placing speaker s, direct the speakers to ward the position of the listener’ s ears whe re the listener sits to enjoy music or movies. • Place the ...
-
Integra DSR-4.8 - page 18
18 Connecting the D VD receiver —Continued Connecting the Speaker Cab les The follo wing illustrat ion sho ws which speake r should be connected to each pair of terminals. Connecting a P owered Subw oofer Using a suitable cable, connect the D VD receiver’ s SUB- WOOFER PRE OUT to an input on your po wered sub- woofer , as shown. This section ex ...
-
Integra DSR-4.8 - page 19
19 Connecting the D VD receiver —Continued Connecting the AM Loop Antenna The supplied indoor AM loop an tenna is for indoor use only . If you cannot achie ve good reception with the supplied indoor AM loop antenna, try using it with a commer- cially av ailable outdoor AM antenna (see page 20). Connecting an Outdoo r FM Antenna If you cannot achi ...
-
Integra DSR-4.8 - page 20
20 Connecting the D VD receiver —Continued Connecting an Outdoo r AM Antenna If good reception cannot be achie ved using the supplied AM loop antenna, an outdoor AM antenna can be used in addition to the lo op antenna, as sho wn. Outdoor AM antennas work best when installed outside horizontally , but good results can sometimes be obtained indoors ...
-
Integra DSR-4.8 - page 21
21 Connecting the D VD receiver —Continued A V Cables & Connector s Video Cable Jack Description HDMI HDMI connections can carry uncompressed, stan- dard or high def inition digital video and digital audio, for the best picture and sound quality . Component video Component video separates the luminance (Y) and color dif ference signals (P R , ...
-
Integra DSR-4.8 - page 22
22 Connecting the D VD receiver —Continued The following matrix sho w s how the video outputs work in relation to the v arious video settings. ✓ : Output * 1 No picture will be output from other than HDM I when you connect the TV that the native resolution is “ 720p” or “1080i”. * 2 If your TV doesn’t support pr ogressive scanning, yo ...
-
Integra DSR-4.8 - page 23
23 Connecting the D VD receiver —Continued • Read the manuals supplied with your A V components. • Don’ t connect the power cord until you’ ve completed all audio and video connections. RCA A V Connection Color Coding RCA A V connections are usually color coded: red, white, and yello w . Use red plugs to connect right-chan- nel audio inpu ...
-
Integra DSR-4.8 - page 24
24 Connecting the D VD receiver —Continued • Connect the D VD receiv er directly to your TV . If you connect the D VD receiv er through a VCR, TV/VCR combination, or video selector , the picture may be dis- torted because D VD-V ideo discs are usually copy pro- tected. Using Component Video Y ou can use the component video output instead of the ...
-
Integra DSR-4.8 - page 25
25 Connecting the D VD receiver —Continued ■ iP od with video or RI Dock w ith the OSD m ode Connect your RI Dock’ s analog audio output jacks and V ideo output jack to the DVD recei ver’ s VIDEO 2/DOCK INPUT L/R jacks and V jac k. Connect the RI Dock with an cable. (Onk yo DS-A1X/A2/A2X hookup sho wn belo w . ) ■ iP od without video Conn ...
-
Integra DSR-4.8 - page 26
26 Connecting the D VD receiver —Continued This section sho ws ho w to connect the D VD receiver to an HDTV , projector, or game console that has an HDMI input/output sock et. What is HDMI? HDMI (High Definition Multimedia Interface) is a ne w connection format that can carry uncompressed, stan- dard or high def inition digital video and digital ...
-
Integra DSR-4.8 - page 27
27 Connecting the D VD receiver —Continued T o control the D VD receiv er with the remote controller when D VD receiver is located in a cabinet, you’ll need a commercially a vailable mul tiroom remote control kit. • Multiroom kits are made by Niles and Xantech. These kits can also be used when control other compo- nents. Using a Multiroom Kit ...
-
Integra DSR-4.8 - page 28
28 Connecting the P ower/T urning on the D VD receiver Befor e connecting • Make sure that all the connections on pages 17–27 are complete (the connection to a TV is required). Note: D VD recei ver features a scree n sa ver and an auto po wer off fun ction. If the recei ver is stop ped and no b utton is pressed for 15 minutes, the screen sa ver ...
-
Integra DSR-4.8 - page 29
29 Initial Setup This chapter expl ains the settings you need to make the very first time the D VD receiver is turned on. Basically this manual contains procedures using the remote controller . The very first time you turn on the D VD recei ver, the “Initial Setup” men u appears onscreen. Here you need to mak e a fe w settings to get the D VD r ...
-
Integra DSR-4.8 - page 30
30 HDMI and Pr ogressive Settings Note: Stop playback before perform these settings. This section explains ho w to turn on the HDMI OUT and change the video resolution when your TV or projector is connected to the HDMI OUT. The D VD receiver supports the follo wing resolutions: AU T O : The resolution is automatic ally set to the nati ve resolu- ti ...
-
Integra DSR-4.8 - page 31
31 Under standing Common Operations Use the Master V olume control, or the remote c ontrol- ler’ s V OL [ ]/[ ] b utton. The volume can be set to “Min”, “1” through “79”, “Max”. Depending on subwoofer le vel or listening mode, the maximum v olume v aries. Y ou can select DVD, FM, AM, or connected other A V component (set top box, ...
-
Integra DSR-4.8 - page 32
32 Understanding Common Operations —Continued Y ou can temporarily mute the output of the D V D receiv er. W ith the sleep timer, you can set the D VD receiv er to turn of f automati cally after a specif ied period. If you need to cancel the sleep timer, press the [Sleep] button repeatedly un til the SLEEP indicator disappears. T o check the ti m ...
-
Integra DSR-4.8 - page 33
33 Pla ying Discs This chapter cov ers basic playback. Advanced playback functions are cov ered in the “ Adv anced Playback” on page 43. Note: Only load discs that are supported by the D VD recei ver. See pages 8 to 9. This section explains ho w to start, pause, and stop play- back. 1 D VD receiver Press [Open/Close] to open the disc tray . The ...
-
Integra DSR-4.8 - page 34
34 Playing Discs —Contin ued Notes: • Prolonged display of the same picture or menu may cause irreparable damage to your TV screen known as scr een burn-in . T o pre vent this, don ’t k eep playback paused for too long and always press the Stop [ ] but- ton when you’ ve fi nished playing a D VD disc or VCD. The D VD recei ver feat ures a sc ...
-
Integra DSR-4.8 - page 35
35 Playing Discs —Contin ued This section explains ho w to fast forward and rev erse. Notes: • Fast forward and fast re verse may not always work at the speed shown onscreen. • For discs other than audio CDs, no sound is output during fast forward or f ast re verse. • For D VD- Audio discs, fast forward and fast re verse cannot be used whil ...
-
Integra DSR-4.8 - page 36
36 Playing Discs —Contin ued D VD-V ideo discs usually have a menu from which you can select titles, ch apters, and other options, including soundtracks, subtitles, and audio formats (e.g., Dolb y Digital or DTS). VCDs that support PBC (Playback Control) may also hav e an onscreen menu. Notes: • Not all D VDs and VCDs have menus. • Menu opera ...
-
Integra DSR-4.8 - page 37
37 Playing Discs —Contin ued This section explains ho w to play MP3 and WMA files with the “Disc Navigator”. Note: During random playback or memory playback, the arrow buttons cannot be used. Navigating MP3 & WMA Di scs 1 Load an MP3 or WMA disc. The “Disc Navigator” appears. Initially , the folders in the root direc- tory are display ...
-
Integra DSR-4.8 - page 38
38 Playing Discs —Contin ued This section explains ho w to display a slideshow of JPEG images on your TV . ■ T o display th umbnails T o display thumbnails, in step 3, after opening the folder you want to display , press the [T op Menu] button. Use the arrow [ ], [ ], [ ], [ ] buttons to select the thumbnails, and press [Enter] to start a slide ...
-
Integra DSR-4.8 - page 39
39 Listening to the Radio W ith the built-in tuner you can enjoy AM and FM radio stations. Y ou can store your fav orite stations as presets for quick selectio n. Listening to the Radio T uning into Radio Stations ■ Auto T uning Mode When tuned into a statio n, the indicator appears. When tuned into a stereo FM station, the FM ST indica- tor appe ...
-
Integra DSR-4.8 - page 40
40 Listening to the Radio —Continued ■ T uning i nto Statio ns by Frequency Y ou can tune into AM and FM stations directly b y enter- ing the appropriate frequenc y . Y ou can store a combination of up to 40 of your fa vorite AM/FM radio stations as presets. Note: This procedure can also be performed on the D VD receiv er by using its [Preset M ...
-
Integra DSR-4.8 - page 41
41 Using the Listening Modes See “ About the Listening Modes” in the right column for detailed information about the listening modes. Direct In this mode, audio from the input source is output directly with minimal processing, providing high-fidel- ity reproduction. Stereo The selected input source is processed as a stereo signal and output by ...
-
Integra DSR-4.8 - page 42
42 Using the Listening Modes —Continued T -D (Theater-Dimensional) Listening Angle Setting W ith this setting, you can specify the angle of the front left and right speake rs relati ve to the list ening position . Processing for the Theater -Dimensional listening mode is based on this setting. Ideally , the front left and right speakers should be ...
-
Integra DSR-4.8 - page 43
43 A d va n c e d P l ay b a ck W ith the “Search” function you can select chapters, titles, and tracks by nu mber . T o use the function with D VD, D VD playback is required. Notes: • During playback, you can select other chapters or tracks directly b y using the nu mber buttons (i.e., with- out pressing the [Search] b utton). For example, t ...
-
Integra DSR-4.8 - page 44
44 Adv anced Playbac k —Continued W ith the “Search” functi on you can search by time. Notes: • In some cases, playback may start from a slightly dif- ferent point to the one that you specify . • T ime search may not work with some discs. • T ime search cannot be used while a D VD- V ideo or V ideo CD menu is displayed onscreen. • The ...
-
Integra DSR-4.8 - page 45
45 Adv anced Playbac k —Continued W ith the “Repeat” function you can play a disc, title, chapter , group, track, or folder over -and-over again. Notes: • Repeat playback may not work with some discs. • If the “Memory Playback” function is on (see page 47), the selectable option s are “Memory Repeat”, which plays the playlist repe ...
-
Integra DSR-4.8 - page 46
46 Adv anced Playbac k —Continued W ith the “Random” function you can enjoy a random selection of titles, chapters, groups, tracks, or folders. Notes: • Random playback may not work with some discs. • T o use the “Random” function with a VCD that sup- ports PBC, you must first turn of f PBC (see page 36). • If the “Memory Playback ...
-
Integra DSR-4.8 - page 47
47 Adv anced Playbac k —Continued W ith the “Memory Playback” function you can create your own memor y list of titles, chapters, and tracks. Adding New Items to the List M em o r y P l ay b a ck 1 Press the [Memory] button. The “Memory List” window appears onscreen, as shown. The top ro w ( ) is used to enter tit le/ folder and chapter/tr ...
-
Integra DSR-4.8 - page 48
48 Adv anced Playbac k —Continued Deleting Items fr om the List Editing Steps Notes: • T o close the “Memory List” window , press the [Return] b utton. • The memor y list will be deleted when t he D VD receiv er is set to Standby or the disc tray is opened. • T o use this function with a VCD that supports PBC, you must fi rst turn of f ...
-
Integra DSR-4.8 - page 49
49 Adv anced Playbac k —Continued W ith the Zoom function you can enlarge an y part of the picture. Notes: • The Zoom function may not w ork with some discs. • The Zoom function cannot be used with HD JPEG. • The Zoom function cannot be used with disc menus. Some D VDs feature multiple ca mera angles that allo w you to vie w scenes from dif ...
-
Integra DSR-4.8 - page 50
50 Adv anced Playbac k —Continued Some D VD-V ideo discs feature soundtracks in sev eral languages or audio formats (e.g., Dolby Digital or DTS). Music D VD-V ideo discs and DVD- Audio discs some- times feature audio in se veral formats, such as PCM, Dolby Digital, or DTS. See the disc’ s sleeve notes for details. Notes: • W ith DVD- V ideo d ...
-
Integra DSR-4.8 - page 51
51 Disc and Input Inf ormation Y ou can display v arious information about the curr ent disc, or input so urce as follo ws. Disc Inf ormation The information displayed depends on the type of disc, as follo ws: ■ DV D - V i d e o Onscre en: • Current/total tit le number , elapsed title time, remain- ing title time, total title time, sele cted so ...
-
Integra DSR-4.8 - page 52
52 Contr olling Other Components Y ou can control a TV . Y ou must enter the appropriate remote control code first. Entering Remote Control Codes Note: The remote control codes pro vided are correct at the time of printing, but are subject to change. Controlling a TV T o control a TV , point the remote controller at it and use the buttons explained ...
-
Integra DSR-4.8 - page 53
53 Contr olling Other Components —Continued When operating an Apple iPod in RI Dock with an connection, you can control it by D VD recei ver’ s remote controller . When Using an RI Dock: • Connect the RI Dock to the VIDEO 2/DOCK INPUT jacks (see page 25). • Set the RI Dock’ s RI MODE switch to HDD or HDD/ DOCK. • See to th e RI Dock’ ...
-
Integra DSR-4.8 - page 54
54 Configuring the D VD receiver Here you can conf igure the D VD receiv er in this menu on display . The configurations are common for the all input settings e xcluding “ A VSync”, “V ideo1 Input” and “V ideo2 Input”. For detailed information, ref er to the pages in brackets. Setup Menu 1 Remote controller HOLD Press and hold the [Setu ...
-
Integra DSR-4.8 - page 55
55 Configuring the D VD receiver —Continued Speaker s Output Balance Here you can adjust the out put balance of speakers. The balance can be adj usted from “L + 12” to “R + 12” in 1 steps. Note: When the listening mode is set to “Direct”, no effect will be produced. Correcting Sound and Picture Sync When using progressi ve scanning on ...
-
Integra DSR-4.8 - page 56
56 Configuring the D VD receiver —Continued Crosso ver Frequency This setting only appl ies to the speakers that you speci- fie d as “ Small” in the “Front Speake rs Size” on page 55. T o get the best bass performance from your speaker sys- tem, you need to set the crosso ver frequency according to the size and frequency response of your ...
-
Integra DSR-4.8 - page 57
57 D VD Onscreen Setup Menus This chapter explains the v arious functions and settings of the onscreen setup menus. Functions and settings are arranged into six menus: Picture , Au d i o , Language , Display , Operation Setting , and Initial Setup . The following table lists all the functions and settings, with a brief description and page number w ...
-
Integra DSR-4.8 - page 58
58 D VD Onscreen Setup Menus —Continued This section explains ho w to navigate th e onscreen setup menus. Using the Onscreen Setup Men us 1 Press the Input [ ]/[ ] buttons to select “D VD”, and then press the [Setup] button. The onscreen setup menu appears, as shown. 2 Use the arr ow [ ]/[ ]/[ ]/[ ] buttons to na vigate the menus, and press t ...
-
Integra DSR-4.8 - page 59
59 D VD Onscreen Setup Menus —Continued TV Shape W ith this setting you can selec t a picture format to match the aspect ratio of your TV . 4:3 Letter box (default): Choose this option if you have a standard TV (4:3 aspect ratio). When you watch widescreen D VD- V ideo movies, the entire pic- ture will be visible and there will be black bars at t ...
-
Integra DSR-4.8 - page 60
60 D VD Onscreen Setup Menus —Continued Progre ssive Setting W ith this setting you can set the component video output to progressi ve or interlaced. While the “HDMI Output Setting” is set t o “On”, this setting is f ixed at “Progres- siv e” and cannot be changed. See page 30 for mo re information. Interlace: Component video output is ...
-
Integra DSR-4.8 - page 61
61 D VD Onscreen Setup Menus —Continued Digital/HDMI A udio Out W ith this setting you can configure the HDMI digital output. All (default): Dolby Digital and DTS signals are output as they are. If your TV or amp doesn’ t support higher sampling rates, set the “Linear PCM Out” setting to “Down Sample On” (below). PCM: Dolby Digital and ...
-
Integra DSR-4.8 - page 62
62 D VD Onscreen Setup Menus —Continued ■ Selecting Other La nguages This section explains ho w to select other languages for disc menus, audio, and subtitles. Use this list when specifying other languages. 1 Remote controller Select “Others” fr om the “Disc Menu Langua g e”, “A udio Lan- guage”, or “Subtitle Language” menu, and ...
-
Integra DSR-4.8 - page 63
63 D VD Onscreen Setup Menus —Continued On-Screen Display W ith this setting you can turn on or off onscreen mes- sages, such as “Play”, “Stop”, and “Resume”. Off: Onscreen messages are not displayed. On (default): Onscreen messages are displayed. On-Screen Display Color W ith this setting you can set the color and theme of the Disc n ...
-
Integra DSR-4.8 - page 64
64 D VD Onscreen Setup Menus —Continued Setting the Parental Loc k W ith the Parental Lock function you can block access to certain scenes that the authors hav e flagged as being unsuitable for children. Notes: • When entering a security code, you can use the [CLR] bu tton to delete the numbers en tered so far , if neces- sary . • Not all dis ...
-
Integra DSR-4.8 - page 65
65 D VD Onscreen Setup Menus —Continued D VD Priority Contents This setting determin es what is played when a D VD- Audio disc also contains D VD-V ideo material. D VD- A UDI O (default): The D VD- Audio material is played. DV D -V I D E O : The D VD-V ideo material is played. SA CD Priority Contents SA CDs have two separate areas for storing aud ...
-
Integra DSR-4.8 - page 66
66 Additional inf ormation Use this procedure to reset all the recei ver’ s settings to the factory default. Note that resetting the D VD receiv er will delete your radio presets and custom settings. All D VD-V ideo discs carry a region mark on the case some where that indicates which region(s) of the world the disc is compatible with. Y our DVD ...
-
Integra DSR-4.8 - page 67
67 Additional inf ormation —Continued ■ MP3, WMA & JPEG Files MP3, WMA and JPEG files are typically organized into folders. The D VD receiver handles MP3, WMA and JPEG files as tracks. Glossary Analog audio An electrical signal that directly represents sound. Com- pare this to digital audio which can be an electrical sig- nal, but is an ind ...
-
Integra DSR-4.8 - page 68
68 Glossary —Continued Dynamic range The difference between the quietest and loudest sounds possible in an audio signal (without distorting or getting lost in noi se). Dolby Digital and DTS soundtracks are capable of a v ery wide dynamic range, deli vering dramatic ci nema-like effects. File extension A tag added to the end of a filename to indic ...
-
Integra DSR-4.8 - page 69
69 T r oubleshooting If you hav e any trouble using the D VD receiv er, look for a solution in this section. If you can’t resolve the issue yourself, contact the dealer from whom you purchased this unit. The power to the system is not turned on • Make sure that the power cord is plugged into the A C outlet. Make sure that the other end of the p ...
-
Integra DSR-4.8 - page 70
70 T roubleshooting —Continued The subwoofer produces no sound • When you play source material that contains no infor- mation in the LFE channel, the subwoofer produces no sound. • Make sure the subwoofer is configu red correctly (page 54). Headphones makes noi se or no sound • There may be a bad contact. Clean up the headphones terminal. F ...
-
Integra DSR-4.8 - page 71
71 T roubleshooting —Contin ued Reception is noisy , FM stereo reception is no isy , or the FM ST indicator doesn’t appear • Relocate your antenna. • Move the D VD receiver a way from your TV or com- puter . • When listening to an AM station, operating the remote controller may cause noise. • Passing cars and airplanes can cause interfe ...
-
Integra DSR-4.8 - page 72
72 T roubleshooting —Continued No sound, or sound is distorted • No sound is output when sc anning discs other than audio CDs and SA CDs. • Check that the disc is free from dust and dirt, and that it is not damaged (page 9). • Check that the plugs and terminals are free of dirt, oxide, etc. and clean if ne cessary . Also ch eck the cable fo ...
-
Integra DSR-4.8 - page 73
73 T roubleshooting —Contin ued If you’ re using an HDMI connection and there’ s no picture or sound, you can check the status of the HDMI connection by pressing and holding do wn the D V D recei ver’ s [Display] button for 10 seconds until a message ID appears on the display . Look up the message ID in the following tables and check the HD ...
-
Integra DSR-4.8 - page 74
74 Specifications Amplifier Section Video Section Tu n e r S e c t i o n General ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Contr ol T erminal Specifications and features are subject to change without notice. Rated outp ut Power (FTC) 50 watts m inimum con tinuous po wer per channel, 6 oh m loads, 2 cha nnels dri ven ...
-
Integra DSR-4.8 - page 75
75 Remote Contr ol Codes List TV 888 0264 Acura 0009 Addison 0092, 0108, 0653, 1150 Admiral 0093, 0463 Advent 0761, 0783, 0815, 0817, 0842 Aiko 0092 Aiwa 1916 Akai 0009, 0030, 0208, 0264, 0361, 0602, 0672, 0702, 0753, 0812, 1935 Akura 0264 Alba 0009, 0037, 0371 Albatron 0700, 0 843 Alfide 0672 America Action 0180 Amstrad 0009, 0037, 0171, 0371, 043 ...
-
Integra DSR-4.8 - page 76
76 Remote Contr ol Codes List —Continued TV ECE 0037 Electroband 0000 Electrograph 1755 Electrohome 0463 Elektra 0017, 1661 Elin 0037 Elta 0009 Emerson 0154, 0171, 0178, 0180, 0236, 0361, 0463, 0623 Envision 0030, 0813 Erres 0037 ESA 0 171, 0812 Ether 0009, 0030, 0161 Etron 0009 Feilang 0009 Feilu 0009, 0817 Feiy an 0264 Feiyue 0009, 0817 Ferguso ...
-
Integra DSR-4.8 - page 77
77 Remote Control Codes List —Continued TV Kaige 0009, 0264, 0817 Kaisui 0009 Kanghua 0896 Kangli 0001, 0009, 0264, 0661, 0817 Kangyi 0009, 0264 Karcher 0610 Kathrein 0556 KEC 0180 K en do 0037 K en wood 0030 Khind 0706, 0896 Kioto 0054, 0556, 0706 KLH 0765, 0767 KLL 0037 K olin 0053, 0108, 0150, 0180, 0474, 1150, 1331 K on gque 0009, 0264, 0817 ...
-
Integra DSR-4.8 - page 78
78 Remote Contr ol Codes List —Continued TV P alladium 0418 P alsonic 0773 P anama 0264 P anasonic 0037, 0051, 0054, 0161, 0208, 0226, 0250, 0508, 0650, 0896, 1168, 1175, 1177 P anda 0009, 0051, 0208, 0226, 0264, 0508, 0698, 0706, 0780, 0817 P ausa 0009 P enney 0030, 0047, 0051, 0060, 0156, 0178, 1347, 1378 Philco 0030, 0037, 0054, 0056, 0074, 01 ...
-
Integra DSR-4.8 - page 79
79 Remote Control Codes List —Continued TV Squarevie w 0171 SSS 0180 Standard 0009 Starlite 0180 Studio Experi- ence 0843 Sunkai 0865 Superscan 0093, 0864 Supra 0056 Supreme 0000 Susumu 0474 SV A 0587, 0748, 0865, 0870, 0871 Swisstec 0880 Sylvania 0030, 0054, 0171, 1314 Symphonic 0171, 0180 Synco 0000, 0060, 0092, 0093, 0178, 0451, 0474 Syntax 11 ...
-
Integra DSR-4.8 - page 80
80 *M e m o SN 29344561 (C) Copyright 2007 ONKY O CORPORA TION Japan. All rights reser ved. * 2 9 3 4 4 5 6 1 * Y0710-1 Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales & Product Plann ...
Do you have a question concerning Integra DSR-4.8?
Use the form below
If you did not solve your problem by using a manual Integra DSR-4.8, ask a question using the form below. If a user had a similar problem with Integra DSR-4.8 it is likely that he will want to share the way to solve it.