Manual Patton electronic 1020

8 pages 0.09 mb
Download

Go to site of 8

Summary
  • Patton electronic 1020 - page 1

    USER MANUAL MODEL 1020 and 1020S Synchronous Short Range Modem with T ransformer Isolation SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part #07M1020-C Doc. #04101 1UC Revised 4/20/98 CERTIFIED An ISO-9001 Certified Company ...

  • Patton electronic 1020 - page 2

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1020 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...

  • Patton electronic 1020 - page 3

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics T echnical Support at (301 ...

  • Patton electronic 1020 - page 4

    3.2 SWITCH SETTINGS All possible settings for the Model 1020’s configuration switches are presented in the summary table and descriptions below . If you have additional questions regarding configuration, contact Patton T echnical Support at (301) 975-1007. Switch 1: RTS/CTS Delay After request to send (RTS) is raised by the host terminal, the 102 ...

  • Patton electronic 1020 - page 5

    1. Open the unit by gently inserting a screw driver between the DB-25 connector and the lip of the plastic case (see below). Y ou don’t have to worry about breaking the plastic, but be careful not to bend the D-sub connector . Once the unit has been opened, you will be able to see the terminal blocks located at the rear of the PC board. 2. Strip ...

  • Patton electronic 1020 - page 6

    4. Connect one pair of wires to the two XMT (transmit) poles on the terminal block, making careful note of which colors you use. The Model 1020 is not polarity sensitive, so either wire may connect to either pole. 5. Connect the other pair of wires to the two RCV (receive) poles on the terminal block, making careful note of which colors you use. Th ...

  • Patton electronic 1020 - page 7

    APPENDIX A SPECIFICA TIONS T ransmission Format: Synchronous, full duplex T ransmission Line : T wo unconditioned twisted pair 19 - 26 A WG Range : (See table below) Interfaces : EIA RS-232, CCITT V .24 Data Rates : 1200 - 19.2 Kbps Isolation : Minimum 1500 V RMS via custom transformers Surge Protection: 600W Surge Protection (10x1000µs waveform) ...

  • Patton electronic 1020 - page 8

    APPENDIX B RS-232 PIN CONFIGURA TIONS Copyright © 1998 Patton Electronics Company All Rights Reserved 1- (FG) Frame Ground 2- (TD) T ransmit Data T o Model 1020 3- (RD) Receive Data From Model 1020 4- (RTS) Request to Send T o Model 1020 5- (CTS) Clear to Send From Model 1020 6- (DSR) Data Set Ready From Model 1020 7- (SG) Signal Ground 8- (DCD) D ...

Manufacturer Patton electronic Category Network Card

Documents that we receive from a manufacturer of a Patton electronic 1020 can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- 1020 manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic 1020
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic 1020.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic 1020, service manual, brief instructions and user manuals Patton electronic 1020. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic 1020.

A complete manual for the device Patton electronic 1020, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic 1020 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic 1020.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic 1020 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic 1020, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic 1020, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic 1020 - which should help us in our first steps of using Patton electronic 1020
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic 1020
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic 1020 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic 1020?

Use the form below

If you did not solve your problem by using a manual Patton electronic 1020, ask a question using the form below. If a user had a similar problem with Patton electronic 1020 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)