English dropdown-ico

Manual Patton electronic 1018RC

12 pages 0.3 mb
Download

Go to site of 12

Summary
  • Patton electronic 1018RC - page 1

    USER MANUAL MODEL 1018RC Powered High Speed Short Range Modem: Rack Mount Card SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M1018RC-C Doc# 013012UC Revised 2/4/97 CERTIFIED An ISO-9001 Certified Company ...

  • Patton electronic 1018RC - page 2

    1.3 SERVICE All warranty and nonwarranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container . This number may be obtained from Patton Electronics T echnical Support: (301) 975-1007 ; http://www .patton.com ; or , support@p ...

  • Patton electronic 1018RC - page 3

    3.0 CONFIGURA TION This section describes the location and orientation of the Model 1018RC’s configuration switches and jumpers, and provides detailed instructions for all possible settings. The Model 1018RC uses a combination of DIP switches and jumpers that allow configuration to an extremely wide range of applications. Designed around a mid-pl ...

  • Patton electronic 1018RC - page 4

    S1-3 through S1-6: Not Used S1-7 and S1-8: RTS/CTS Delay The combined settings for switches S1-7 and S1-8 determine the amount of delay between the time the Model 1018RC “sees” RTS and when it sends CTS. Currently , the Model 1018RC does not have optional delay settings. “No Delay” is defined as between 500 nsec and 1 msec. The switches sho ...

  • Patton electronic 1018RC - page 5

    S2-8: Microprocessor Reset The setting for switch S2-8 determines whether the Model 1018RC’s microprocessor is in normal operating mode or “reset” mode. This switch is used primarily for factory test purposes, since removing the card from the chassis resets the microprocessor automatically . S2-8 Setting On Reset Mode Off Normal Operating Mod ...

  • Patton electronic 1018RC - page 6

    Figure 8 (below) provides an overview of interface jumper functions for the rear interface cards. Following this overview is a detailed description of each jumper ’s function. Line Shield & FRGND (JB2) This jumper affects the line interface. In the connected (closed) position, it links RJ-1 1 pins 1 & 6, or RJ-45 pins 2 & 7 to frame g ...

  • Patton electronic 1018RC - page 7

    Switching the Power Supply On and Off The power supply on/off switch is located on the front panel. When plugged in and switched on, a red front panel LED will glow . Since the Model 1000R16 is a “hot swappable” rack, it is not necessary for any cards to be installed before switching on the power supply . The power supply may be switched off at ...

  • Patton electronic 1018RC - page 8

    Point-to-Point T wisted Pair Connection The 6-position RJ-1 1 and 8-position RJ-45 jack options for the Model 1018RC are prewired for a standard TELCO wiring environment. Connection of a 2-wire or 4-wire twisted pair circuit between two or more Model 1018RCs requires a crossover cable as shown in the following diagrams. RJ-1 1 Cable SIGNAL PIN# PIN ...

  • Patton electronic 1018RC - page 9

    4. If the BER test indicates no errors are present, move the V .52 toggle switch to the right, thus activating the “51 1/E” test with periodic errors. If the test is working properly , the red “Error” LED will glow . A successful “51 1/E” test will confirm that the loop is in place, and that the Model 1018RC’s built-in “51 1” gene ...

  • Patton electronic 1018RC - page 10

    APPENDIX A P A TTON MODEL 1018 RC SPECIFICA TIONS T ransmission Format: Asynchronous to terminals; synchronous between units Internal Interface: Connection to Model 1000R16 rack chassis via male card edge External Interface: DB-25 female (RS-232), RJ-1 1 or RJ-45 (line) T ransmission Line: 4-wire unshielded twisted pair (UTP), 19-24 A WG Asynchrono ...

  • Patton electronic 1018RC - page 11

    APPENDIX C P A TTON MODEL 1018RC F ACTOR Y REPLACEMENT P ARTS The Patton Model 1018RC rack system features interchangeable rear cards, power cords/fuses for international various operating environments and other user-replaceable parts. Model numbers, descriptions and prices for these parts are listed below . Patton Model # Description 1000RPEM .... ...

  • Patton electronic 1018RC - page 12

    APPENDIX D P A TTON MODEL 1018RC INTERF ACE ST ANDARDS Copyright © Patton Electronics Company All Rights Reserve 21 1- (FG) Frame Ground 2- (TD) T ransmit Data T o 1018RC 3- (RD) Receive Data From 1018RC 4- (RTS) Request to Send T o 1018RC 5- (CTS) Clear to Send From 1018RC 6- (DSR) Data Set Ready From 1018RC 7- (SG) Signal Ground 8- (DCD) Data Ca ...

Manufacturer Patton electronic Category Network Card

Documents that we receive from a manufacturer of a Patton electronic 1018RC can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- 1018RC manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic 1018RC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic 1018RC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic 1018RC, service manual, brief instructions and user manuals Patton electronic 1018RC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic 1018RC.

Similar manuals

A complete manual for the device Patton electronic 1018RC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic 1018RC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic 1018RC.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic 1018RC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic 1018RC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic 1018RC, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic 1018RC - which should help us in our first steps of using Patton electronic 1018RC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic 1018RC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic 1018RC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic 1018RC?

Use the form below

If you did not solve your problem by using a manual Patton electronic 1018RC, ask a question using the form below. If a user had a similar problem with Patton electronic 1018RC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)