English dropdown-ico

Manual Clover Electronics LCD0935

11 pages Not applicable
Download

Go to site of 11

Summary
  • Clover Electronics LCD0935 - page 1

    INSTRUCTION MANUAL 9.2” TFT LCD COLOR MONITORING SYSTEM With 2 Indoor/Outdoor Color Cameras MODEL: LCD0935 Ver. 061109, 011510 Copyright © 2009 Wisecomm. All Rights Reserved. ...

  • Clover Electronics LCD0935 - page 2

    ▪ To prevent fire or shock hazard, do not e xpose the m onitor to rain or moisture. ▪ To avoid electrical shock, do not open the case of this product. ▪ Operate this product using only the supplied power supply . ▪ Do not overload electrical outlets or extension cords, this can result in f ire or electric shock. ▪ Keep this product away f ...

  • Clover Electronics LCD0935 - page 3

    1. This light is lit in blue when the AC power supply is properly plugged to DC jack (refer to #9). 2 -Select the CH1 camera by pressing this button in the manual mode or autom atic sequential mode. -Press Down ( ▼ ) button to navigate the submenu. 3. -Select the CH2 camera by pressing this button in the manual mode or autom atic sequential mode. ...

  • Clover Electronics LCD0935 - page 4

    12. Audio input (RCA jack) Audio input port for VCR playing 13. Audio output (RCA jack) Audio output port for recording. 14. Video input (BNC) Video input port for VCR playing 15. Video output (BNC) Video output port for recording. 3.2 CAMERA 1. Lens 3.6mm fixed Lens. 2. Infrared LEDs 30 Infrared LEDs let you s ee objects in the darkness. 3. CDS se ...

  • Clover Electronics LCD0935 - page 5

    4.1 Installation of Mounting Bracket for TFT LCD Monitor 1. Turn the tightening knob ① counter-clockwise to disassemble the swivel. 2. Place the fixed ring ② into the swivel as shown ill ustration above and turn the tightening knob ① clockwise to secure the swivel. Pay attention not to miss the spring ③ . 3. Loosen the locking knob and set ...

  • Clover Electronics LCD0935 - page 6

    4. Place the square m etal ④ on the top of the mounting br acket into the metal hole ⑤ on the rear of the monitor as shown illu stration above, then secure th e monitor using the locking ring ⑥ . 5. Turn the tightening knob ① clockwise to secure the swiv el after setting the desired angle of monitor to display. It can be used for wall-mount ...

  • Clover Electronics LCD0935 - page 7

    1. Attach the moun ting bracket base ① to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joist and secure the bracket base using the supplied screws. 2. Lock the mounting bracket with the locking ring ② . 3. Turn the pivot locking screw ③ with the provided hex-head wrench counter- clockwise to set ...

  • Clover Electronics LCD0935 - page 8

    - All the menus will autom atically disapp ear if you don’t change values within 10 seconds. - The remote controller may not control al l the functions on the system . In case of this, please use the butto ns on the front panel. 6.1 Video Enhancement ( ) - Press the MENU button on the fr ont panel to setup the menus. - Select the VIDEO INHANCEMEN ...

  • Clover Electronics LCD0935 - page 9

    - Choose one among 15, 30, 45 and 60 to turn the power off automatically after the selected time in minute. Sharp: - Adjust the sharpness of images. Panel-LR: - You can view the mirror images or norm al images by selecting. Panel-UD: - You can view the reverse images or norm al images by selecting. AUTO-SWITCH - Select the dwell time f or the autom ...

  • Clover Electronics LCD0935 - page 10

    Minimum illumination 0 Lux (LED on), 0.1 Lux @F1.2 (LED off) IR LED 30pcs, Wave Length: 850nm S/N ratio More than 48db (AGC off) Gamma characteristics 0.45 Video output 1.0Vp-p Composite @75 ohms Microphone Waterproof C-Mic Exposure Time Range 1/60s ~ 20µs Lens 3.6mm fixed lens Current consumption 400 mA Max @LED on Power supply DC 12V (Re gulated ...

  • Clover Electronics LCD0935 - page 11

    ▪ Please pack the system carefully and securely using the original pa cking m aterials, and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703 . ▪ Please include a check for $20.00 to cover the cost of return posta ge and handling. If the system is returned w ithin the warranty period, please include a proof of purchase. If t ...

Manufacturer Clover Electronics Category Monitor

Documents that we receive from a manufacturer of a Clover Electronics LCD0935 can be divided into several groups. They are, among others:
- Clover Electronics technical drawings
- LCD0935 manuals
- Clover Electronics product data sheets
- information booklets
- or energy labels Clover Electronics LCD0935
All of them are important, but the most important information from the point of view of use of the device are in the user manual Clover Electronics LCD0935.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Clover Electronics LCD0935, service manual, brief instructions and user manuals Clover Electronics LCD0935. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Clover Electronics LCD0935.

Similar manuals

A complete manual for the device Clover Electronics LCD0935, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Clover Electronics LCD0935 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Clover Electronics LCD0935.

A complete Clover Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Clover Electronics LCD0935 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Clover Electronics LCD0935, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Clover Electronics LCD0935, that we can find in the current document
3. Tips how to use the basic functions of the device Clover Electronics LCD0935 - which should help us in our first steps of using Clover Electronics LCD0935
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Clover Electronics LCD0935
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Clover Electronics LCD0935 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Clover Electronics LCD0935?

Use the form below

If you did not solve your problem by using a manual Clover Electronics LCD0935, ask a question using the form below. If a user had a similar problem with Clover Electronics LCD0935 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)